No exclusion for hierarchies in BEx query
I am trying to determine why a hierarchy cannot be excluded in a BEx filter.
We have a profit center with a hierarchy and sub-hierarchies under the main hierarchy.
I have a BEx query setup so the profit center is in the Free Selection area. Under the Properties section the main hierarchy is set and the Activate Hierarchy Display option is turned on.
When I run the BEx report and access the filter, I can see the hierarchies and sub-hierarchies, but there is not option to exclude a sub-hierarchy (red dot).
Is this normal or am I missing something?
Let me know,
Bill
Hello Yi,
I don't know about the message in the trace. Try running the query in transaction RSRT first. Check the BW statistics in table RSDDSTAT. If QDBSEL and/or QDBTRANS are 0, then there's probably some incorrect restriction in your query.
You can also do a SQL trace and check if the big SQL statements return some records. There have been cases where the database did not work correctly (see SAP notes).
Regards,
Marc
SAP NetWeaver RIG, US BI
Similar Messages
-
How to find the objects that are used for a particular BEx query
Hi ,
I am preparing the inventory for BEx queries. Means for a particular BEx query I want to know the correcsponding
1. Selection screen variables
2. Characteristics
3. Restrcited, Calculated and normal key figures.
I have checked all the BEx query related tabe but unable to find the proper relation between these tables to get the desired output.
Can you help for table joins to get the output as mentioned above.
Thanks in advance.
Regards,
SaiHi,
you want find the total information about query details use the T CODE - RSRTQ.
give the proper selection then execute.
please find the doc.
RSRTQ – Query Definition – Multipurpose T-Code on BEx Queries
Thanks,
Phani. -
How to find out which connection is used for access to Bex query?
Hello,
in our BO 4.0 environment we have a lot of different connections to Bex queries.
There exist more connections to one Bex query.
For example to Bexquery1 we can access with 2 connections, connection : BX1 (connection specific for one query) and connection DEVcubes(generic connection to all cubes)
How can I check in Webi report over Bex query which connection is currently used?
Thanks a lot !
RudolfHi Rudolf,
Your requirement can be achieved using QueryBuilder.
Please refer to following QueryBuilder step-by-step post by Manikandan:
http://scn.sap.com/community/bi-platform/blog/2012/10/11/businessobjects-query-builder-queries
In bove post, Go to Universe Queries section -> All webi report using one connection
In case you dont know how to use QueryBuilder, please refer to following post:
http://scn.sap.com/docs/DOC-42952
Please let us know if you get any doubt. -
Need your help !!! -- Authorization error for Real-Time Bex query
Dear experts:
I have a Bex query built on a multiprovider, this multiprovider is consist of one standard cube and one real-time cube(virtual provider). When I run this query, I can retrive the data and no error occured, but when others execute this query, they will get the error message below:
Operation Generate a Request could not be carried out for DTP DTP_D7JVT8DGBQWPWL13VIUITNODG
You do not have authorization for the data transfer process
Errors occurred during parallel processing of query 2, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
I used tcode rsecadmin to track the authorization, when I execute as user XXX, I can get the same error above, but when I go to "Display Log", no error showed there.
Did anybody meet the same error before? How to resolve that?
Any post would be appreciated and thank you all in advance!
TimI think there is some missing authorization,here
the user has no access to execute the DTP.
You can analyse it in rsecadmin or also see
which object you are getting in su53.
Thanks,
Saveen -
Can we put condition for color in bex query designer
hi all,
can any one guide me how to put a condition for color settings in query designer
for example:
i have a key figure like ANSWERED%.in analyser it should display in red if answered% exceeds 95%.
please help me in this issue.
regards
Vamshi D Krishna.Hi,
Use Exceptions while designing your Query.
Please go through the link
http://help.sap.com/saphelp_nw04s/helpdata/en/43/21b4cd14cd06f4e10000000a422035/frameset.htm -
this is my hierarchy in BEX query
course(node id:1 header)
training grp 1 training grp 2 training grp3----
level 1(node id 2)
-training grp 4(parent is grp 1,LEVEL2)
- training type1(leve 3)
-training type2(level1 3)
now in crystal reports i am able to achieve by grouping at training grp(level 2) and training type and summarizing the keyfigure .However, i am not able to get or display the training grp at level 1.so how to get it?
2) is there any way to group on trainig grp only on level 1?I tried to created group expert and restrict with values in level 1, but it didnt work.
ie. i want the same way when we run the report in bex analyzer where we are using the hierarchy in rows and key fig in clumns.
kf
trainig grp 1 1000
training grp 4 1000
trainig type 1 500
trainig type 2 500See this post: Classic Crystal Reports and Classic SAP connectivity questions
-
Displaying results for Hierarchies in BEx
Dear Bwers,
I have a query that has hierarchy and a calculated key figure(CKF). The CKF for the parent nodes now displays the total of all child nodes whereas i need the parent node to display the average of the child nodes. Is there a way to do this? All or any help is greatly appreciated.
Thanks
Raj
Message was edited by: Raj Singh
Message was edited by: Raj SinghBjorn,
i tried that but i got this error message while i execute the query.
Calculating result as...' was not executed
Message no. BRAIN141
iagnosis
The function 'Calculate Results as ...' could not be used in all
instances.
The recalculation of a result cell always occurs based on the set of
detatiled cells subordinated to this cell. This is the most detailed
level of the drilldown. Therefore it is not posible to recalculate in
hierarchical lists. The calculation of a results cell is not performed
if a cell or column with an expand symbol is assigned beneath it.
Otherwise the newly calculated result is changed every time one of its
lower-level nodes is expanded. This is not supported for technical
reasons and would also only confuse users.
Note, however, that calculating with "Suppress Results" is always
executed because the restriction described above does not apply in this
case.
Thanks
Raj -
Short dump in report generation for bex query
Hi,
I have e newly installed SAP NetWeaver 7.3 and I'm not able to run BEx-Queries. When I start transaction RSRT and try to generate the report for the selected bex query, I get the following short dump:
Category ABAP Programming Error
Runtime Errors RAISE_EXCEPTION
ABAP Program SAPLRRSI
Application Component BW-BEX-OT
If I start the test in RSRV for that query I get:
Generation limits for the generated report
Unable to load report GPEM3XZBL2Y9VX9H6SN
Am I missing a profile parameter for that generartion limits or something else?
Thanks in advance!Hi,
Check whether your SAP GUI is activated and installed correctly.
check following threads
Runtime error RAISE_EXCEPTION has occurred
Dump when activating Business Content 7.35
Thanks and regards
Kiran -
Web Template for BEx Query?
Hello,
How to find if there is any Web Template exist for a given BEx Query?
Thanks,
Dona HillHi Dona,
You can find out by looking up the query in the metedata repository (RSORMDR) or by just pulling and collecting it in the transport connection.
Hope this helps... -
Unwanted LOVs - Universe on a BEx query on top of a Multiprovider
BO XI 3.1
BW 7.01
OLAP Universe on a BEx query
BEx query on top of a Multiprovider
Multiprovider on 2 DSOs; lets say DSO1 and DSO2
BEx query has a global filter for "INFOPROVIDER = DSO1"
BEx query has a user input variable defined for "Field1" (Field1 is present in both DSOs)
In BEx, F4 on Field1 variable entry gives the values of Field1 from DSO1. (which is what we want)
Expected LOVs for the generated prompt for Field1 in the WEBI report: Values of Field1 from DSO1
Problem:
Actual LOVs returned in WEBI report: Values of Field1 from both DSO1 and DSO2
Has anyone faced this before?
Thank youHenry Banks wrote:
> I have a suspicion the BEX property 'only values in infoprovider' isn't picked up/consumed by the BAPIs used by the MDX interface.
That is correct. The BEx properties do not carry over to the BO side. In Webi 3.1 here are the default selections for LOVs (as far as I know)
OLAP universe against BEx query on an infoprovider (Infocube, DSO, Multiprovider) - Only values in Infoprovider
OLAP universe against BEx query on an Infoset - Values in the master data table
My understanding now is
OLAP universe against BEx query on a Multiprovider - Only values in ALL Infoproviders under the Multiprovider
Henry Banks wrote:
> Yes, this is confirmed by Note 1224318 - MDX: InfoProvider restriction for the member rowset
> It's a BW limitation of the OLE DB for OLAP.
I have seen this note before and according to it you can set an RSADMIN parameter MDX_JOIN_CUBE_DIME and have more control over the LOVs.
MDX_JOIN_CUBE_DIME = "A" -> The read mode for all LOVs is Only values in master data
MDX_JOIN_CUBE_DIME = "I" -> The read mode for LOVs is either master data or infoprovider depending on the infoobject settings
Henry Banks wrote:
> It might be easier to have to 2 data providers for this document, if you don't already, for plan and actual; or 2 seperate bex queries.
Well, that would work but it would defeat the purpose of having a Multiprovider for logical partitioning, wouldn't it? -
How to remove pound symbol # and preserve leading zeros in BEx Query
Hi,
I have two questions regarding the display in BEx Query.
1. How can I remove the pound symbol # for blanks in BEx Query?
2. How can I preserve leading zeros? At the moment, value "001" will be displayed as "1". But I need the leading zeros.
Thanks.
JoonHi ,
You can apply these settings in Bex query designer.
If you need to remove pound symbol jsut make a new formula and use NODIM function you will find this function under data functions.
So NODIM(Your price keyfigure) this will remove the Pound symbol.
For # just find out against which characterstic you are getting # then go to default values panel there you will find all your characterstic which you are using in report---Rt click -Restrict-single valuesdirect input-#-Move to selection(That forward arrow)--select that # and choose exclude from selection (That red square icon).
And yes for leading zeros check out this thread
Leading zeros not displaying
Hope it helps you.
Regards,
AL
Edited by: AL1112 on Jun 9, 2011 1:43 PM
Edited by: AL1112 on Jun 9, 2011 1:47 PM -
Running the BEX query from webdynpro ABAP
Hi Gurus,
Can someone provide the code for running the BEX query from WDA.
Thanks,
David.Hi! Do you want to get query results in ABAP or to open excel from browser?
-
SAP BEx Query as a Web Service - JAVA Stack needed?
Dear all,
I want to use the Web Service for calling a BEx Query in SAP BW 7.02.
Do anybody know if a JAVA Stack is needed to get that Web Servcie working?
Thank you very much for your help!
DieterHi,
i use Query As Werservice in xcelsuis so, wthen i click on prview button, a prompt is displayed and i can choose either Entreprise or SAP connxion .
i choosed SAP connexion and used SAP formated login like BI7~001/USERNAME
And i also tested the webservice with soapUI. The result is the same... i can't see data with SAP connexion.
thanks. -
Using hierarchies from SAP BW BEx Query in BO Universe
Hello,
I'm trying to use a hierarchy (e.g. a simple customer class hierarchy) which is a part of a BEx Query in a BO Universe. But until now I have not found a way to get a hierarchy from a BEx Query working in a BO Unvierse.
1. Is it generally possible to use hierarchies in BEx Queries with a BO universe? (at the moment I can see all characteristics and keyfigures from the query... but I can't see the hierarchy levels for the characteristic)
2. If 1) is possible: I want to use a hierachy variable to select a hierarchy depnding on the user who is using a report... that's not a problem in BEx. But: Is it possible to use this query/scenario with a BO universe? Does the BO universe update itself automatically if the hierarchy has changed in a BEx query?
I've tried it with SAP BW 3.5 and SAP BI 7.0. BO Release is XI 3.0. Unfortunatelly without result.
Regards,
ThorstenHi Thorsten,
1) Hierarchies are mapped in the same way as custom-made universe hierarchies. When a hierarchy is defined on a characteristic in the BW Query, Designer creates one hierarchical structure in the universe, with a subclass for each level in the hierarchy. The structure depends on the current BW Query definition.
2) If the number of levels in a hierarchy changes in the BW query, you must update the universe. In the universe connection select *Use Single Sign On when refreshing
reports at view time* to allow the user to benefit from SAP SSO.
Hope this helps
Jacques -
Creating Restrictions in BEx query designer for (1-a), where a is variable.
Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
JeraldMy requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald
Maybe you are looking for
-
REG : Logic to define the default purchaser in Purchase org
Hi SRM Gurus, Need your help and suggestion in one issue. In Standard system default Operational purchaser information responsible for processing shopping cart is not available. The requirement is to determine the Default Operational Purchaser, as in
-
I have a mid-2010 white unibody MacBook. It's been running fine, with the exception of a problem with the dashboard after the most recent firmware upgrade about a year ago. I just learned to work around it. But then Friday I got an error saying the t
-
Sent notes uncomplete from ibooks
When i send by email annotations (comments) or underlined text from an book from ibooks, it doesn't send all my annotations.
-
How to change Shopping cart error messages.
Hi, My Client side end users are trying to create shopping carts, and if the shopping cart fails in backend side, it will display error message in status like 'Item Contain Error' or 'Backend Document not able to generate' like this. But, by looking
-
Info about system - how to ?
Hello friends, How can I find out on a SAP system the following info for the last few months ? - System load average indicator, - CPU usage rate, and enqueue, - RAM usage, Paging out, and swap, - I/O read and I/O write per sec and I/O queues, Thanks