No IDocs created; Database system
Hi,
While loading ODS from a DBConnect,the load has failed giving following error.
No IDocs created; Database system
Diagnosis
No IDocs were created. The IDocs are created in BW with database systems as source systems. Since no IDocs were created, a short dump in BW probably occurred.
I checked ,there was no short dump in BW.We have got this error many times.Everytime when we delele the bad request and repeat the failed IP, the load completes successfully.
I am not able to find out the reason behind this failure.
Can anybody help me out?
Thanx.
HI Prerana,
Did you get any response to this, i too have had this twice and have had to kick off the loads manually. The only clue are two entries in sm21, where there was a 'database error 1034 at CON', which is a connection problem to oracle. So DB Connect failed to connect to the oracle database.
Have you spoken to your basis team? Try find out if the DB you were connecting to had some problems at the point in time where your first initial process was accessing, that should answer your question.
thanks Geoff.
Similar Messages
-
Error message : Info Idoc missing ;database system
I am trying to load the data from database system oracle ,the data was successfully loaded into psa , but cant able to load the data into ods from psa .
Data in psa is all green without any errors , as info idocs are missing its not letting to load data manually from psa to ods ,
I try to reload but coming up with same error
Next day problem was fixed automatically, I want to know what is the exact reason for this problem and how can next day it fixed automaticallyError message : Info Idoc missing ;database system
I need the solution urgently, please help -
Hi,
I have a BW 3.5 and I want to load data from an SQL view, I already made the connection, I can see the information in BW source system but when I try to load the data in an InfoSource the next error is shows <b>"No IDocs created; Database system"</b>.
Sombody has the answere?
Thank youThank's vishnuC but didn't work. I erase the red request and then loadt it again with the PSA option, but I have the same error:
<i>No IDocs created; Database system
Diagnosis
No IDocs were created. The IDocs are created in BW with database systems as source systems. Since no IDocs were created, a short dump in BW probably occurred.
System response
Procedure
Check the short dumps in BW.
Procedure for System Administration
.</i> -
Can Inbound IDOC create a BP(Business partner) In SAP CRM system
Hi
Req:
Contractor data is transfered from ERP system to CRM using Message type HRMD_ABA with ALE Distribution Model in place.
Inbound IDOC is Successfully Posted when checked in WE05 in SAP CRM System.
Question :
1. Can an INBOUND Idoc create BP automatically or is there need of Configuration or Any custom program .
Appreciate Your Response
Bhanu Polsani
Edited by: Bhanu Polsani on Oct 4, 2011 6:10 PM
Edited by: Bhanu Polsani on Oct 4, 2011 6:16 PMYou can maintain two different address for the business agreements (can be treated as mailing address for the printed invoice)but you can not maintain more than one standard address for BP as any given time.
Regards,
Sanjoy -
File to idoc scenario . how to create logical system
logical system asking user authorization what should i do.
what should be logical for whic we should degine partner profiles
apoclnt800 or xi7clnt001Hi,
The partner profile to be maintained in we20 (in backend systems -ECC/CRM etc) should be based on logical system for the sender.
For ex: Src (File) -> PI -> Tgt(ECC)
In SLD you have created Technical System(TS) and Business System(say BS) for Src. Also a Logical System name (Say LSNAME) is associated with BS.
In ECC, goto tcode - sale, create a logical system of name LSNAME. Now goto we20 and create a partner profile of name LSNAME. Provide the message type of Idoc in the required place.
Souvik -
Passing Changed extended fields using ALE-IDOC to receiving system
Hi all,
Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
For ex. in matmas05 extended for classification and inspection view and then created using 'CREATION'
related bapi.Do i also need to incorporate the changes by change related bapi or ir can be handled by change pointer concept.
Thanks.Hi Sanu
1) Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.
=> Looks like you have extended standard IDOC here. so you need to find User Exit or BADI for the Push program to populate the additional fields. Yes, it is possible thru change pointers as well.
1) Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
=> Yes, as suggested in 1 try finding User Exits/BADIs.
Regards
Shital -
Unable to Load Database/Unable to create database.
RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild. -
Installation stuck at Create database schema Phase 13 of 27
Hi
I am installing the Netweaver 7.01 SP3 and have already removed it completely after getting stuck at the same installation step. Do not know what is going wrong. A small extract of the log is shown below. Any advice on how to proceed will be helpful. I know when einstalling it has to be removed completely which I did using uninstallation and then clean up tool. But again it is stooping at the same step. I had let it run more almost two days but of no use. My system configuration is good enough with 2GB RAM etc.
INFO 2009-03-12 16:52:00.443 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb.
INFO 2009-03-12 16:52:00.458 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb\NSP.
INFO 2009-03-12 16:52:00.458 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory C:\sapdb\NSP\saplog.
INFO 2009-03-12 16:52:00.474 [synxcpath.cpp:807]
CSyPath::createDirectory()
Creating directory E:\sapdb\NSP\sapdata.
INFO 2009-03-12 16:52:01.67 [sixxcstepexecute.cpp:790]
Execute step sdb_create_db_instance of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
File sapdb.inf does exist. Will use the commands in file sapdb.inf.
INFO 2009-03-12 16:52:06.544 [sixxcstepexecute.cpp:790]
Execute step sdb_init_instance_type of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
INFO 2009-03-12 17:12:38.722 [sixxcstepexecute.cpp:790]
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:39.883 [sixxcstepexecute.cpp:790]
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
Also see log browser from the installation window............................
Please see below as it is geeting stuck at
component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
Mar 12, 2009 5:12:35 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component current="true"><![CDATA[Create users for SAP system]]></component><component current="true"><![CDATA[Install common system files]]></component><component current="true"><![CDATA[Unpack SAP archives]]></component><component current="true"><![CDATA[Install SAP Cryptographic component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="99" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:35 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst [Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="100" total="216"/>
<button sid="btPREV" default="false" enabled="false" >
vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component CDATA[Prepare database schema for ABAP]]></component><component current="true"><![CDATA[Create database schema]]></component><component ><![CDATA[Create sequence for the ABAP user]]></component><component ><![CDATA[Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="104" total="216"/>
[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
<button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
Mar 12, 2009 5:12:39 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><update><updateitem><dialogstatus><![CDATA[ ]]></dialogstatus></updateitem></update></sapinstgui>
Mar 12, 2009 5:38:16 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog severity="FLOW TRACE" filename="" version="1.0"/>
Mar 12, 2009 5:38:16 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstlog version="1.0" append="false" filename="C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\sapinst_dev.log"/>
Mar 12, 2009 5:43:59 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:08:17 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Mar 12, 2009 6:30:31 PM [Info]: com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
Thanks in advance
VikasGuess you are talking about sapinst.log file. Below are the last few lines after which it did not proceed
Do see the last step create DB schema....... The previos log was from sapinst_dev.log
Oliver I have a doubt could it be becuase of the host name.
The host name of my machine is "skumar278-1" with DNS domain name for SAP system "asiapac.globalcsc.net"
Could this be the reason for the problem i am facing i.e installation getting stuck at phase 13 Create DB schema.... Other than this I cannot see anything else which can go wrong.. Do have the DHCP server available..
The page file as per the ram settings i.e for 2 GB should be 3072 so I have set it to the same. Though
the prerequisite page shows
"For the selected services at least 7138 MB swap space are recommended. Current value: 2851 MB. (Updated 2005-06-24)"
Can this be the reason???
Also I just looked at the services file.. there are about about 4-5 different files with the name services .3 services.4 ... services.5 etc als there is no entry for port 3900 3600 & 8000.. .. do not know what to do... Please suggest..
INFO 2009-03-12 17:12:35.412
Execute step CheckDbExistence of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:35.726
Execute step check_dbm_dba_user_passwd of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:37.718
Execute step StartDb of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:38.722
Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
INFO 2009-03-12 17:12:39.883
Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0 -
Is db_name is the only parameter for creating database ? [Exper. on 32-bit]
Because of the discussion present in the following thread, I did few experiments and would you like to share with you. Hope it is a useful information for you guys.
Re: db_name & memory allocation
OS: Win XP SP2 or Windows 2000 <b>(32-bit)</b>
Oracle Version: Oracle 10gR2
System RAM: 1G
<b>Attempting to create the database CCC by specifying db_name parameter only</b>
C:\oracle\product\10.2.0\db_1\database>copy con initCCC.ora
db_name=CCC
^Z
1 file(s) copied.
<b> Starting the service </b>
C:\oracle\product\10.2.0\db_1\database>oradim -new -sid CCC -startmode m
Instance created.
C:\oracle\product\10.2.0\db_1\database>set oracle_sid=CCC
C:\oracle\product\10.2.0\db_1\database>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 6 07:50:06 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
SQL>
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>113246208</b> bytes -- Default SGA size
Fixed Size 1247588 bytes
Variable Size 58721948 bytes
Database Buffers 50331648 bytes
Redo Buffers 2945024 bytes
<b> On seeing dynamic components size, shared pool got
33m, large pool got 0m, java pool got 25m and buffer cache
got 50m. Please check the references for these default
values. </b>
SQL> select component,current_size from v$sga_dynamic_components;
COMPONENT CURRENT_SIZE
shared pool 33554432
large pool 0
java pool 25165824
streams pool 0
DEFAULT buffer cache 50331648
KEEP buffer cache 0
RECYCLE buffer cache 0
DEFAULT 2K buffer cache 0
DEFAULT 4K buffer cache 0
DEFAULT 8K buffer cache 0
DEFAULT 16K buffer cache 0
COMPONENT CURRENT_SIZE
DEFAULT 32K buffer cache 0
ASM Buffer Cache 0
13 rows selected.
<b>Total=109051904 </b>
SQL>
create database
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
<b>Errors in alert log file</b>
ORA-00604: error occurred at recursive SQL level 1
<b>ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","create unique index
i_proxy_...","sql area","kksol : kksnsg")
</b>
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
<b>It was thought that shared_pool memory area is not
sufficient. Then thought to know how oracle will behave on
setting sga_target parameter.</b>
<b>initCCC.ora</b>
db_name=CCC
sga_target=113m
SQL> startup nomount
ORACLE instance started.
Total System Global Area <b>121634816 bytes -- Got around 121m </b>
Fixed Size 1247636 bytes
Variable Size 54527596 bytes
Database Buffers 62914560 bytes
Redo Buffers 2945024 bytes
<b>Now create database statement got success here.
Instance got few extra Mbs of memory and oracle can create
the database.</b>
<b>Then it was thought that, why to give 121Mb even. Let exactly 113246208 bytes be devoted to the instance.</b>
initCCC.ora
db_name=CCC
sga_target=113246208 -- providing exact number of bytes as obtained in default case
SQL> startup nomount
ORACLE instance started.
Total System Global Area 113246208 bytes
Fixed Size 1247588 bytes
Variable Size 54527644 bytes
Database Buffers 54525952 bytes
Redo Buffers 2945024 bytes
SQL>
<b> Now create database statement got success here as
well. Because of sga_target, automatic shared memory
management enabled and instance was taking care of buffer
cache, shared pool, large pool, java pool and
streams_pool. In this case shared pool got 46m (greater
than default case value). Java pool and Large pool got 4
mb each and buffer cache got 54m. </b>
SQL> select component,current_size
2 from v$sga_dynamic_components;
COMPONENT CURRENT_SIZE
shared pool 46137344
large pool 4194304
java pool 4194304
streams pool 0
DEFAULT buffer cache 54525952
KEEP buffer cache 0
RECYCLE buffer cache 0
DEFAULT 2K buffer cache 0
DEFAULT 4K buffer cache 0
DEFAULT 8K buffer cache 0
DEFAULT 16K buffer cache 0
COMPONENT CURRENT_SIZE
DEFAULT 32K buffer cache 0
ASM Buffer Cache 0
13 rows selected.
<b>Total=109051904 </b>
SQL>
By providing 113246208 bytes (as in default case) of
memory to SGA by setting sga_target value, Oracle gave
extra memory to shared_pool and buffer cache than in case
of default, thus helping create database statement to get
pass. Oracle always recommends to use automatic shared
memory management by setting sga_target parameter value.
Hope this experiment provides few clues about automatic
shared memory management feature of Oracle 10g. This case
was conducted on 32-bit Oracle. It is quite possible that
create database statement might get success in 64-bit
Platform as by default Oracle will provide 84 Mb to Shared
pool. But to confirm, it has to be experimented.
References:
Shared pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams196.htm#sthref804
Large Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams090.htm#sthref377
Java Pool
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams087.htm#sthref364
Buffer Cache
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams043.htm#sthref185Hi,
Good Work Mohammed !!!
Regards
Taj -
Phase Create Database Error in ECC 6.0 EHP5 Installation on SuSe10/Oracle11
Hi,
I have following error ecnounter During Create Databse Phase. Have applied the latest patch after Oracle Installtion.
/oracle file system has the permissions 755.
Environment : ECC 6.0 EHP5 Installation on SuSe10/Oracle11.
Please advise
sapinst_log:-
INFO 2011-08-27 20:36:38.900
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.901
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.908
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:38.915
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:36:38.927
Creating file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.927
Removed file /install/dev_sap_kernel_test_27_Aug_2011_20_36_38.
INFO 2011-08-27 20:36:38.933
Real group ID set to 1001.
INFO 2011-08-27 20:36:39.497
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.498
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:36:39.510
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:36:39.510
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:36:39.543
Working directory changed to /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64.
INFO 2011-08-27 20:37:58.173
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:37:58.174
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/x.
INFO 2011-08-27 20:38:02.167
Creating file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.168
Removed file /install/sapinst_instdir/x.
INFO 2011-08-27 20:38:02.172
Authorizations set for /install/sapinst_instdir.
INFO 2011-08-27 20:38:02.190
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.192
Removed file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.198
Copied file '/Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel'.
INFO 2011-08-27 20:38:02.217
Authorizations set for /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/dev_sap_kernel.
INFO 2011-08-27 20:38:02.217
Removed file /Media/IM_LINUX_ORACLE/IM_LINUX_X86_64/dev_sap_kernel.
INFO 2011-08-27 20:38:04.407
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/keydb.3.xml'.
INFO 2011-08-27 20:38:06.213
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/statistic.2.xml'.
INFO 2011-08-27 20:39:33.662
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.670
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:33.674
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:33.686
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:34.589
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:34.600
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:39.720
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:39.733
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:41.685
Copied file '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.xml' to '/install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/inifile.2.xml'.
INFO 2011-08-27 20:39:51.367
Execute step createDatabase of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0
INFO 2011-08-27 20:39:57.971
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.1
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:39:58.26
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:39:58.71
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2011-08-27 20:40:00.256
Working directory changed to /install/sapinst_exe.26397.1314448526.
INFO 2011-08-27 20:40:00.278
Working directory changed to /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
ERROR 2011-08-27 20:40:08.434
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-08-27 20:40:08.437
MUT-03025 Caught ESAPinstException in module call: .
ERROR 2011-08-27 20:40:08.585
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step: SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.).
INFO 2011-08-27 20:40:09.446
Creating file /install/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.ora_sql results log:::
2011-08-27, 19:40:31 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 19:40:31 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 19:40:31 SAPINST ORACLE stop logging
2011-08-27, 20:27:43 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:43 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:50 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:50 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:50 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:27:52 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:27:52 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:27:52 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:00 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-01507: database not mounted
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:05 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:05 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:05 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 2338463744 bytes
Fixed Size 2228600 bytes
Variable Size 1174408840 bytes
Database Buffers 1140850688 bytes
Redo Buffers 20975616 bytes
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
2011-08-27, 20:40:07 SAPINST ORACLE stop logging
================================================================================
2011-08-27, 20:40:08 SAPINST ORACLE start logging for
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/JE1/origlogA/log_g11m1.dbf',
'/oracle/JE1/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/JE1/origlogB/log_g12m1.dbf',
'/oracle/JE1/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/JE1/origlogA/log_g13m1.dbf',
'/oracle/JE1/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/JE1/origlogB/log_g14m1.dbf',
'/oracle/JE1/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 11.2.0.2.0 Production on Sat Aug 27 20:40:08 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
CREATE DATABASE JE1 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/JE1/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/JE1/sapdata1/temp_1/temp.data1' SIZE 1400M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/JE1/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/JE1/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oracle/JE1/origlogA/cntrl/cntrlJE1.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program /oracle/JE1/112_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-08-27, 20:40:08 SAPINST ORACLE stop logging -
Warning: Index does not exist in database system MSSQL
Hi,
After activating the Index from SE11,
I receive the following Warning:
Index does not exist in database system MSSQL.
What does this mean? Has performance been increased or does the index 1st have to exist in the database system MSSQL?When you create index at SE11 and you need activate database utility.
utilitities-database utility->then click activate and adjust database.
else you can use SE14 and so that Index will create databse level.
Reward Points if it is helpful
Thanks
Seshu -
Index does not exist in database system ORACLE??????
Hi Experts,
I created a Secondary Index in DEV, its fine and the message is,
<b><i>Index KNA1~Z01 exists in database system ORACLE</i></b>
I moved it to TEST and there I got the message is like,
<i><b>Index does not exist in database system ORACLE</b></i>
So,
1 - Wht I hv to do now? Shuld I see BASIS people?
2- Why its happened like that? Coz of not enough space?
ThanQ.thanq sudheer,
I got the return code as 4, so Can I go for creation of new request and there by moving to test?
1 - Anyways, so, after Activating Seconadyr Index, Shuld I come back and Do I need to activate the Table also?
or
2- Just activating the index is enough?
thanq.
Message was edited by:
Srikhar -
Index does not exist in database system DB6
Hi,
Problem : <b>Index does not exist in database system DB6</b>.
I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
So when the cases is occurs i must re-create the index again in Production Level...
Can someone give me some ideas?
Thanks.Hi,
it might be due to some BUG in RDBMS...
First Check the Secondary index in TEST system
Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
If that not moved Properly then you need to create another request for the INDEX and move it again
See the threads with similar problem...
Warning: Index does not exist in database system MSSQL
Index does not exist in database system ORACLE??????
Re creation of database index
Hope it will solve your problem...
<b>Reward Points if useful</b>
Thanks & Regards
ilesh 24x7 -
Can't create database using ASM (SOLVED)
Hi all
I'm trying to use ASM for the first time, on Oracle 10.2.0.1 on Solaris x64.
I have installed the ASM instance into /opt/oracle/asm/10.2.0 and created disk groups. I have cssd running OK. I am able to start and stop the ASM instance without problems, and I can select from v$asm_diskgroup to confirm that disks are mounted OK.
I have then installed Oracle EE separately into /opt/oracle/server/10.2.0. I first did a software only install, and now I am trying to create a DB.
The problems come when I try to use this ASM instance to host a new database. I first tried to use DBCA to create a new database, but on database creation I got the following errors:
ORA-00200: control file could not be created
ORA-00202: control file: '+DBLIVE1'
ORA-17502: ksfdcre:4 Failed to create file +DBLIVE1
ORA-15001: diskgroup "DBLIVE1" does not exist or is not mounted
ORA-15055: Message 15055 not found; No message file for product=RDBMS, facility=ORA
ORA-01031: insufficient privileges
I then told DBCA just to create the DB creation scripts, and I tried manually running these with SQL*Plus.
When doing it with SQL*PLus, I initially got the same error as shown above. But then something changed (sorry, not sure what), and now the error I get is:
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
I've put some debug info below, showing me succesfully connecting to the ASM instance and then attempting to create the DB using the db creation scripts, showing the error at the end. You can see that the oracle OS user is able to connect fine to ASM, then I swithc ORACLE_SID and ORACLE_HOME to the EE install and try to create the DB, at which point it apparently can't connect to ASM any more.
I've tried the DB creation many times, and in between attempts I completely empty $ORACLE_HOME/admin/<dbname> and delete the files related to the attempted install from $ORACLE_HOME/dbs/ . I've also stopping/starting ASM, rebooting, and I've done the install of ASM and EE a couple of times over in case I made any mistakes in my earlier attempts.
Any help would be much appreciated!
Tom
##### CHECKING ASM
oracle@neonrcom-db1:~$ uname -a
SunOS neonrcom-db1 5.10 Generic_127128-11 i86pc i386 i86pc
# css is running
oracle@neonrcom-db1:~$ ps -ef | grep css
oracle 498 1 0 21:46:40 ? 0:01 /opt/oracle/asm/10.2.0/bin/ocssd.bin
# listener is running in the ASM instance
oracle@neonrcom-db1:~$ ps -ef | grep tnsl
oracle 1332 1 0 21:49:59 ? 0:00 /opt/oracle/asm/10.2.0/bin/tnslsnr LISTENER -inherit
# ASM is only entry in /var/opt/oracle/oratab
oracle@neonrcom-db1:~$ grep -v "^#" /var/opt/oracle/oratab
+ASM:/opt/oracle/asm/10.2.0:N
# I can connect to ASM fine, and it has diskgroups mounted.
oracle@neonrcom-db1:~$ export ORACLE_HOME=/opt/oracle/asm/10.2.0
oracle@neonrcom-db1:~$ export ORACLE_SID='+ASM'
oracle@neonrcom-db1:~$ sqlplus "sys as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 21 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> set line 150
SQL> select name, block_size, state, type, total_mb, free_mb from v$asm_diskgroup;
NAME BLOCK_SIZE STATE TYPE TOTAL_MB FREE_MB
DBARCH1 4096 MOUNTED EXTERN 2096856 2096784
DBLIVE1 4096 MOUNTED EXTERN 4193904 4193812
#### Contents of init.ora for new DB
db_create_file_dest=+DBLIVE1
db_recovery_file_dest=+DBARCH1
db_recovery_file_dest_size=2147483648
##### DB INSTALLATION ATTEMPT
oracle@neonrcom-db1:~$ export ORACLE_HOME=/opt/oracle/server/10.2.0
oracle@neonrcom-db1:~$ export ORACLE_SID='NEONREL1'
oracle@neonrcom-db1:~$ export PATH=$ORACLE_HOME/bin:$PATH
oracle@neonrcom-db1:~$ /opt/oracle/server/10.2.0/admin/NEONREL1/scripts/NEONREL1.sh
You should Add this entry in the /var/opt/oracle/oratab: NEONREL1:/opt/oracle/server/10.2.0:Y
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 21 22:10:54 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
specify a password for sys as parameter 1
Enter value for 1: xxx
specify a password for system as parameter 2
Enter value for 2: xxx
specify a password for sysman as parameter 3
Enter value for 3: xxx
specify a password for dbsnmp as parameter 4
Enter value for 4: xxx
specify ASM SYS user password as parameter 6
Enter value for 6: xxx
Connected to an idle instance.
SQL> spool /opt/oracle/server/10.2.0/admin/NEONREL1/scripts/CreateDB.log
SQL> startup nomount pfile="/opt/oracle/server/10.2.0/admin/NEONREL1/scripts/init.ora";
ORACLE instance started.
Total System Global Area 1.9294E+10 bytes
Fixed Size 2054976 bytes
Variable Size 2264925376 bytes
Database Buffers 1.7012E+10 bytes
Redo Buffers 14721024 bytes
SQL> CREATE DATABASE "NEONREL1"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
8 EXTENT MANAGEMENT LOCAL
9 SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
10 SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
11 SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
12 CHARACTER SET AL32UTF8
13 NATIONAL CHARACTER SET UTF8
14 LOGFILE GROUP 1 SIZE 51200K,
15 GROUP 2 SIZE 51200K,
16 GROUP 3 SIZE 51200K
17 USER SYS IDENTIFIED BY "&&sysPassword" USER SYSTEM IDENTIFIED BY "&&systemPassword";
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
Message was edited by:
tjobbinsUpdate: I've worked out the difference between the two sets of errors I get.
The basic error is this:
ORA-00200: control file could not be created
ORA-00202: control file: '+DBLIVE1'
ORA-17502: ksfdcre:4 Failed to create file +DBLIVE1
ORA-15001: diskgroup "DBLIVE1" does not exist or is not mounted
ORA-15055: Message 15055 not found; No message file for product=RDBMS, facility=ORA
ORA-01031: insufficient privileges
However if my init.ora contains the line:
control_files=/opt/oracle/server/10.2.0/dbs/cntrlNEONREL1.dbf
then I instead get the second error:
CREATE DATABASE "NEONREL1"
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00349: failure obtaining block size for '+DBLIVE1'
ORA-01031: insufficient privileges
So basically these must be the same error, just in the second case I'm not trying to put the control file on the ASM so it fails at a different point.
But both errors must be because of the same cause, I suppose. -
I m Not able to access to create database, Please solve the problem. please give some text steps
===================================
Create failed for Database 'Qlao'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1750.9+((dac_inplace_upgrade).101209-1051+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476
Program Location:
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl()
at Microsoft.SqlServer.Management.Smo.Database.Create()
at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabaseData.DatabasePrototype.ApplyChanges(Control marshallingControl)
at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabase.DoPreProcessExecution(RunType runType, ExecutionMode& executionResult)
at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.DoPreProcessExecutionAndRunViews(RunType runType)
at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.ExecuteForSql(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult)
at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.Microsoft.SqlServer.Management.SqlMgmt.IExecutionAwareSqlControlCollection.PreProcessExecution(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult)
at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.RunNow(RunType runType, Object sender)
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.ExecuteNonQuery(StringCollection queries, Boolean includeDbContext)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImplFinish(StringCollection createQuery, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl()
===================================
CREATE DATABASE permission denied in database 'master'. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1617&EvtSrc=MSSQLServer&EvtID=262&LinkId=20476
Server Name: SLPSOFTSOLS1
Error Number: 262
Severity: 14
State: 1
Line Number: 1
Program Location:
at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)Hello,
This issue might be caused by the User Account Control (UAC) settings if we use Windows 7 or Windows Server2008, ect Operating System. Please also take a look at the following articles:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/28fee0ed-c7e2-40df-8f79-f513c9848f09/create-database-permission-denied-in-database-master-microsoft-sql-server-error-262?forum=sqltools
http://blogs.msdn.com/b/dparys/archive/2009/09/17/create-database-permission-denied-in-database-master-my-fix.aspx
Regards,
Elvis Long
TechNet Community Support
Maybe you are looking for
-
XML and Images stored in Oracle 8i
I have been able to store images within an acle 8i database using both LONG RAW and OrORDSYS.ORDIMGB datatypes. I can use Forms and Reports to access these datatypes but now wish to include them in WEB products such as XSQL or PL/SQL. Using XSQL I on
-
Lost duckhead, can i use my apple battey charger duckhead?
hi difficult one, i lost my duckhead - (maybe) shipped with my mbp 15" mid 2010 refurb and instead of buying a new europ. duckhead in my local apple store, can i use my apple battery charger duckhead? it must have same specs yes? european, germany..
-
VL10G is not creating delivery for some of the confirmed scheduled lines
Hi, I was trying to find the reason why we are getting a very generic error message (Message type V50R ID 036 - The document could not be delivered.) for some of the confirmed schedule lines when executing VL10G in batch and no delivery document is c
-
Hello everybody, Every video that I play in quick time has a bunch of white dots show up on it, but only in windowed mode if I switch to full screen the movie plays fine. BTW: I'm running quick time 7.0.4 in Win XP Pro Thanks for any help, Windows
-
I am trying to connect a UDS System from a Weblogic 7.0 sp1 server. My application is deployed as an ear file and when I try to open a SSL connection I am getting the following exception. javax.net.ssl.SSLHandshakeException: FATAL Alert:HANDSHAKE_FAI