NO OF USER HITS FOR DASHBOARDS

Hi all,
We are developing dashboards through Visual Composer but we need to count the no of user hits per dashboard.
we get count for query, workbook and Template etc correctly. But we usually get dashboard count through portal but it gives
the each and every navigation step being executed by user as count.
We require if 1 user opens 1 dashboard once it will give count as 1 irrespective of navigation steps in the dashboard.
please help me to know the dashboard coun

solved

Similar Messages

Default User setting at Dashboard level

Hi SAP Users,
i want default dashboard user setting & all users will only see my setting
Is it possible to have default user setting for dashboard?
Regards
Ravindra

In the administration mode, you can update the current configuration settings/layout (right-click on the UI group you want to update, can be a dashboard, a field...) and save them as the default (standard) settings.
Please try with the administration url I provided you with, and let me know if it helps.
http://server:port/irj/portal?sap/bc/webdynpro/sap/cprojects?sap-config-mode='X'
Matthias

Require User Input for either dashboard prompts not BOTH ! !

Fellow Earthlings,
How to make required for user input for either of dashboard prompts not BOTH. !!!!!!
Like if they enter '123' on DashP1 they need not have to enter DashP2 value and vice versa on same dashboard prompt.
I have some dashboard prompts and I am using presentation variables to pass these values to my analysis.
DashP1 - Pvar1 - Default All columns - User can type in values
DashP2 - Pvar2 - Default All columns - User can type in values
In my report , I am using a SQL filter to do a table.column_name LIKE (concat('@Pvar1}{'%')) same for the other table.column_name LIKE (concat('@Pvar2}{'%')) [ This is because users want to do a partial match on the value.
So when the user is typing the values like 123 on DashP1 they are able to search, which is good. However on DashP2 which defaulted to all column values, they just erase/delete that and pass no value to it. So it remains the prompt vlaue is looking like -Select Value state which is not good. :(
Now when there report is run for that DashP1 -value as '123' obviously we get no results since erasing that is causing it not to pass any value and when i check the query log it passes '@Pvar2'. This is causing no results.
So I thought making it Required user input would resolve the issue, however the new request is to have either DashP1 or DashP2 require user input.
Please advice if there a way to solve this problem.
If this any way possible with Action links or any other methods.
Any help is greatly appreciated.
Thanks,
VidyaS

Hi Vidya, Please post that Script it will be quite handy for other OTN users.
Thanks
NK

How come the form in the JSP page does not work if user hits "ENTER"

When I use the following code for loginpage.jsp
If the user hits ENTER on the keyboard it just displays the same form with nothing in the username box.
It works if the user clicks the button.
<HTML>
<BODY>
<%
String submit = request.getParameter("submit");
if(submit == null){
%>
<FORM METHOD=POST ACTION=loginpage.jsp>
Please enter your username: <INPUT TYPE=TEXT NAME=username SIZE=20>
<INPUT TYPE=SUBMIT NAME=submit VALUE='Go!'>
</FORM>
<%
else {
String user = request.getParameter("username");
if(user == null) {
// display same page
} else {
// foward to next page
%>
</BODY>
</HTML>

I adjusted my code but it still does nto work when hitting the ENTER keyboard button.
<HTML>
<BODY onload="document.form1.left.focus();">
<%
String submit = request.getParameter("submit");
if(submit == null){
%>
<FORM METHOD=POST ACTION=loginpage.jsp>
Please enter your username: <INPUT TYPE=TEXT NAME=username SIZE=20>
<INPUT TYPE="button" name="left" value="LEFT" onlick="alert(this.name)">
<INPUT TYPE="button" NAME="right" VALUE="RIGHT" onclick="alert(this.name)">
</FORM>
<%
else {
String user = request.getParameter("username");
if(user == null) {
// display same page
} else {
// foward to next page
%>
</BODY>
</HTML>
If I do this
<FORM METHOD=POST ACTION=nextpage.jsp>
And use ENTER keyboard button it works, but not when I have ACTION to teh same page.
Why is that?
Is this JSP related or HTML? I thought JSP had something to do with it since it's JSP file.

How to prevent numericstepper from setting the value to the defined Maximum when a number greater than maximum is entered in by keyboard and user hits the "Enter" key.

I need to set the Maximum so that the use can use the mouse to change the value of numericstepper (and not go over a certain number), but at the same time I have to allow the user to enter their value by typing in the text field. When the user enters a number greater than the Maximum, I disable the "Ok" button of the dialog and show a red warning(error message). The issue is that the user can hit "Enter" and numeric stepper would set the value to the Maximum and the dialog box would close and the rest of code would run. I want the numericstepper not to change the value and keep showing the warning even if the user hits the "Enter".
Note: Setting maxChar does not help since my maximum is 1000, and user might enter 5555
I would appreciate the help.

Thanks for trying to help, But
The issue is that if I set the maximum value of stepper 1 greater than the max value that I want, then the user can select an invalid value(of myMax + 1) when he clicks on the UP arrow of the numeric stepper(which is not acceptable for what I am working on).
I need to preserve the users invalid number, while not letting the user to select an invalid number by clicking UP key.
I noticed that when the user enters a number greater than the Maximum, and then click on the down arrow, it would set the value to 1 less than the maximum. This is not acceptable either.

What is the user exit for automatic account determination in PO

Hi Experts
I ned to know what is the user exit for automatic account determination in PO
my client needs the document type to defines Account Assignment Category.
choosen a document type Account Assignment Category is defined automatically. you can't choose
a wrong Account Assignment Category from the drop down list.
thanks form you help.

If this is the case than why don't you use the Transaction variant
SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
The exact solution for your problem is as follows
Go to Tcode SHD0 and enter the transaction variant
In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
Once you finish system will save this one as a variant
Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
W content and output only for your case the field XXXXXXXX should be selected for W content and output only
Make sure you have value 1 in contents field
If not then restart the variant again and on the ME21Nscreen reselect the invoice field
Later exit and save (save in the object which you can transport)
Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

Need to know how records can be deleted from a talbe when user hits cancel report

In my report I am inserting some records in to a table in the before report trigger and deleting in after report trigger.
If the user hits the cancel report when the report is processing the records in the records never gets deleted from the table.
If anyone knows how this can be done, please help me.
Thanks in advance.

If your database is 8.1.6, you can try to use temporary tables. The data inside them is automatically deleted when the session (report) ends.
Also the data is private for each session, so no other user can see the data you have in the temporary table.
Did you think about the situation when two users will run the report at the same time? How are you handling this (the fact that their data may be scrambled...) The Oracle temporary table eliminates this possibility.
null

Change default value (200) of Max No of Hits for selection screen in WAD

How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer .
Thanks in Advance
Points will be surely Rewarded

Dear Hammad,
Please refer to the wiki created by me,
http://wiki.sdn.sap.com/wiki/display/BI/Information+on+the+user+setting+for+the+selector+dialog
Regards,
Arvind

How can I control the windows behavior when the user hits "Windows key +d"?

Hi,
I have an application with 2 top-level windows. Both windows may be open at the same time. One window is a win32 window, and the other is a wpf window. When both windows are open, the wpf window should always be before the win32 window. When the user hits
"Windows key +d" twice (show desktop and restore all windows), the windows are occasionally restored in a different order.
How can I force the wpf window to always be before the win32 window?
Which Windows messages/events are sent when the desktop is restored?
Yoel

Hi,
I tried set the Topmost property on the Wpf window. It didn't help - for some reason, the win32 window still get in front of the Wpf window.
I was able to get some win32 messages that change the win32 window position. I tried then to bring the Wpf window to the front (using SetActiveWindow, SetForegroundWindow, SetWindowPos) but i does not work as expected.
Yoel
Hi Yoelp,
>> tried set the Topmost property on the Wpf window. It didn't help - for some reason, the win32 window still get in front of the Wpf window.
It worked well on my side, could you please tell us more details about these two window? What have you done on the WIn32 Window? We need to know the reason
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User exit for ME21N (Not functional or customer exit)

Hi Guys,
I want to get a user exit for PO as my requirement is to call custom screen before the PO is getting saved.
I have the functional exits and badi's list which will not fulfill my requirement as because on my custom screen i have cancel button.
On clicking the control needs to come back to the me21n second screen with the data entered with out order getting created.
The screen number for the second screen in ME21N is 14.
if i call screen 14 it will work in a user exit where as in customer exit(functional exit) we have limitations with the exporting and importing as so the screen number will not be recognised.
I am able to do the same calling of cust screen in Sales order creation and is sucessfull, the same should happen with PO also.
Probably if the user exit triggers at the time of syntax check i can achive my requirement rather than at save as the call back to the screen will not harm and database commits will not take place.
I also tried with all most of the enahancement points but the call screen statement is not working at any point of time which worked with Sales order exits. So i tried with making the validation fail but still by that time the PO number is getting generated and so if i try to cancel the PO before save and trying to get PO in edit mode but the sequence number is getting missed by by 1.
Please help.
Regards,
Amar.
Edited by: amar srinivas on Feb 11, 2011 10:16 AM
Edited by: amar srinivas on Feb 14, 2011 4:56 PM

Hi,
You can try it this way.
Check badi ME_PROCESS_PO_CUST , method - CHECK.
This badi/method gets triggered when the "CHeck" button and "SAVE" button is pressed.
It consists of a changing parameter CH_FAILED . Pass X to it when cancel button is hit in your custom screen.
Donot use any commit in this method. Read the documentation before doing it.

Search help for user field for WBS element

Hi,
how can I add a search help to one of the user fields for WBS elements without modification? Is there an exit which I can use? I want to have a search help for field PRPS-USR02.
Thanks for your help.

Hi
Create an elementary serach help using the Table USR01 or USR03
see the steps
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Regards
Anji

How can I access user permission for specific items in Sharepoint 2013 via REST API?

I want to access user permissions for specific items like lists, documents, folders etc. via the REST API.
Currently I am hitting the following endpoint:
http://win-5a8pp4v402g/sharepoint_test/site_1/_api/web/getUserEffectivePermissions('win-5a8pp4v402g\\Sharepoint User 2')
However the response looks like this:
"d":
"GetUserEffectivePermissions":
"__metadata":
"type": "SP.BasePermissions"
"High": "0",
"Low": "0"
I cant understand why high and low are both 0? I have added the user to a specific group. Also this is the same result for each of the users. Another thing to note is that I havent added the "Guest" user in the sharepoint server. So when I hit the endpoint for the Guest user, it still shows the same response. So I know there is something I am doing wrong.I want to access permission of a user for a specific item, say a document using the REST API. Can someone tell me how? What would be the endpoint?

Thanks for the reply. Although this works for Lists, I need to get permissions of documents too. Here is what I have tried:
http://win-5a8pp4v402g/sharepoint_test/site_1/_api/web/GetFileByServerRelativeUrl('/sharepoint_test/site_1/Documents/file1.txt')/GetUserEffectivePermissions(@user)?@user='i%3A0%23%2Ew%7Cwin-5a8pp4v402g%5Csharepoint%20user%201'
And the response is:
"error":
"code": "-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
"message":
"lang": "en-US",
"value": "Cannot find resource for the request GetUserEffectivePermissions."
Clearly this doesnt work for a file. Whats wrong?

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do?

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do? Previously hit "organize", ran for 25 min till hit 100%, then "had to close"?

Unfortunately, there's not enough info listed to give you an effective answer.
Can you give more detailed system spec's. There are a lot of differences in RAM, & Hard Drive Technologies. Is your 2TB a single hard drive, or multiple drives in RAID? While a single 2TB drive is nice for the storage capacity, they also sacrifice some performance to reach that capacity... What speed is the RAM, & I'm assuming it's properly opperating in Dual Channel mode (watch your POST screen to be sure). Which Core i7 CPU are you running, & what Operating System are you running. Finally, bring up your task manager, & see what processes are using CPU cycles. Also, are you starting up PrE8 through the default shortcut which uses the Welcome screen?
A quick guess is that Auto Analyzer & the Welcome screen are behind your troubles, but can't be sure till more info is available.
There is a current thread about Auto Analyzer, & I've posted a way to bypass the Welcome screen in several threads.
See my post in this thread to bypass the Welcome screen http://forums.adobe.com/thread/516524 (2nd post in thread)
Message was edited by: chaosdsmFL - added link

Error when user hits Cancel in File Dialog Box

Error 43 occurs when the user hits cancel about saving a file. I have a simple state machine, and when the user hits "RUN", the dialog box comes up. What if they change their mind? I have tried to use the "exception code" in the General Error Handler for Error 43 but I still end up with an error message or my VI stopping.
Are there any templates for VIs that save your data only when you press a "SAVE" button, or either that don't freak out if you hit Cancel?
p.s. I have LabVIEW 6.1.
THANK YOU
Lauren

Hey, I got the same problem, Error 43 when cancel button is clicked, as I was going through one of the examples from "LabView for Everyone" book. I downloaded the Cancelled.vi example and constructed a case structure for it. However, the problem still occurs. When i ran highlight execution for the cancelled.vi example, as the cancel button is pressed the file dialog goes through and sends out boolean value of the cancel status. But for the file I'm working with, the boolean value is not send when cancel button is entered. File dialog sends out an error before the values are send out... Can someone explain? Thanks.
Attachments:
test.gif ‏14 KB
test1.vi ‏48 KB

Help needed: user exit for CO02

I have a problem with user exit. I need to display an error message when the quantity of a specific component of a material is changed in CO02 and user hits save button.
I inserted my code in include program ZXCO1U01. Based on the material type if the user changes the quantity I will display a message. But the problem is the documentation shows that we cant insert a error message in this exit. Its giving a dump if I do that.
I am calling a new screen to display a message but if I try to execute CO02 again for the same order its displaying error messages as that component will remain locked.
Please help me regarding this.
Thanks

Hi Bobby,
We had similar issue and we have added a code to send an e-mail message to the user is any error occurs.
You can't insert an error meesage in this user exit.
Lanka

NO OF USER HITS FOR DASHBOARDS

Similar Messages

Maybe you are looking for