No paper print error

i keep recieving and "out of paper" error message while attempting to print. i have tried loading the main paper tray full of paper, half full and even with a single sheet and i keep recieving this message. the printer has already completed several printed sheets for many previous jobs when it suddently stopped noticing paper in tray, mid job. very frustrating. what are my options

Hey ,
Welcome to the HP Support Forum.
I understand your HP Photosmart 7510 e-All-in-One Printer is displaying a recurring 'out of paper' error. I would like to assist you with this. I have located an article from HP that might help. Click here and work your way through the recommended solutions. Please let me know the result of your troubleshooting by responding to this post. Thank you for posting in the HP Support Forum. Have a great day!

Similar Messages

Receiving a false paper jam error message for a 6310 all in one printer

I have an hp 6310 all in one printer. It is showing a false paper jam error message with no paper in the printer. I have tried all of the fixes that have been suggested on the website as well as on you tube to no avail. Nothing works, I have cleaned all of the parts that have been suggested to clean and reset the printer. I am still receiving the same paper jam message with no paper in the printer. Does anyone have any suggestions to try to fix this printer.

Do you here any clicks or other sounds when the 6310 first starts up?
I'm trying to fix false paper jam error on Sharp Fax/copier,F0-4450.
When researching the problem, found suggestion that a bad solenoid could cause that error.
After completely disassembling the copier found that wasn't the problem.
I here 2 clicks during start up that sounds like gear slipping a tooth, as if something is preventing a shaft from turning.
Back to the drawing board.
UPDATE!!! Took fuser out, turned gears with screwdriver til 81/2x11 paper went thru, lubricated ends of fuser roller with powdered graphite lube.
3 page fax came thru.

Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear? (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

Hey , Thanks for posting in the HP Support Forum. I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality. I would like to help you with this but that particular part is not replaceable. I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards,

How do I get my HP 2645 to print 4x6 cards. It gives me a mismatch paper size error

How do I get my HP 2645 to print 4x6 cards? It gives me a mismatch paper size error.

Hi @aleek,
Thank you for visiting the HP Support Forums! I see you would like to print 4x6 cards to your HP Deskjet Ink Advantage 2645, when you attempt to print the card you get a 'Paper Mismatch' error.
I would like you to go ahead and take a look in your User Guide on page 10, here it shows how to load the media and change the printing preferences, although it shows Photos, you would use the same guidelines and steps for the Index cards, just be sure to change the media type to the correct card you are using.
Once you have the media loaded and settings set if you are still getting the error, continue here: 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
I hope this helps, if you have anymore questions please let me know.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HPePrint gives paper mismatch error when I try to print from my android phone

I have 5x7 paper in the Photosmart 7520 printer and when I try to send a photo from my android phone to the printer, I get a paper mismatch error. Will it only print 4x6? Can I not change a setting somewhere?
This question was solved.
View Solution.

When I print from my Mac, I don't get the error as I'm printing from an application like Lightroom and I can tell it the paper size. Don't get that opputunity when I print from my phone. By default, I think the printer assumes 4X6. Wish that there was some way to tell it otherwise as I'd rather use 5x7

HP Photosmart 6510 gets a "Paper Mismatch" error trying to print on Avery return address labels

I just bought the HP Photosmart 6510 yesterday. I'm trying to print out return address labels to put on my daughters birthday party invitations, but the printer gives me a "Paper Mismatch" error. This new printer replaced an HP PSC 1350 all-in-one, which printed these labels just fine. I am using Pages on Mac OS 10.7 with the Avery 5195 template. The labels are on standard US Letter (8.5" x 11") paper. I'm really not sure what the problem is.
Any help would be appreciated. I have to get these printed out tomorrow!!!

Hi barryofguilder I hope you are doing well and sorry to learn that you are having this issue.
Are you still experiencing this problem? If you are I will do my best to help you.
Please read this Article Click here. Let me know the out come if you still need asssistance I will do my best to help you.
If you are not facing this issue any longer please take a little bit of you time and let me know it will be deeply appreciated.
Best regards;
RobertoR
Remember ↓↓↓
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

C309 and printing envelopes paper mismatch error

New C309 and I can not print legal envelopes. I get a paper mismatch error and press OK to cancel print job. I have inserted the envelopes as directed on the paper tray with no results.

I think I have found the solution to this problem - I stumbled on it myself – The problem is that I have my standard printer settings set to utilize the duplex printing feature (printing on both sides of the paper). When printing an envelope, the printer does NOT like that. By simple changing the Properties for this specific job for “Print on both sides to save paper:” to “Off” I can now print envelopes again as I use to on my old computer. I have no idea what caused the problem but it is now solved for me.
My configuration is currently as follows:
Dell inspiron 14z
Windows 7, 64bit
MS Word 2007

HP Laserjet 2430dtn Paper Jam Error

I have got a HP Laserjet 2430dtn and the bit of plastic for the rear paper jam sensor has broken off the printer and as such I now get a permanent 'Rear Paper Jam' error.
Is it possible to disable the sensor so that I can still use the printer or is the printer dead?

Chances are the printer has a small bit of paper that is still jammed in it. When paper jams always try to pull in the direction of the paper path! If it tears then remove the toner cartridge to see if you can see any bits of paper inside. I have the Laserjet 1012 which is a similar design, early in it's life I had a similar issue, after removing the toner cartridge and seeing all bits of paper were gone I still got an error. I then removed the top cover of the printer, located and removed the offending piece of paper, put it back together and now several thousands of pages later all is fine.
If that doesn't work then contact HP's support (they will reply to an email with 24 hours) or go the chat route. If you try to call because you are well out of warranty there will be charge.

Paper mismatch error with HP officejet pro 8000 (A809)

officejet pro 8000 A809 wireless -wrong size paper
running OSX 10.7.3 on a macbook pro 2.3GHz Intel i5
this printer has been running fine for a couple/three years now.. no problem when I got the new macbook last summer, or when i upgraded to Lion.
Now it has started getting confused as to what the paper size is - i get this error:
Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray.
but only SOMETIMES. Like right now after screaming at it for an hour, unplugging and rebooting, etc., I sat down to write this and needed to get the exact wording for the error, so i told it to print. And it printed just fine. So I tried the next page I need to print, and I got the error again. I didn't even TOUCH the printer in between. The paper is letter size, it's always letter size. It's in landscape mode, but it has been for the whole morning, while I've been printing out certificates. Now it won't do it anymore. I am at a complete loss. I have rebooted my computer 3 times now, and unplugged the printer countless times. HELP!!!!!
It did this about 3 weeks ago and gave me fits for a couple days, and then magically started working fine again. I've deleted the USB and Bonjour versions of the printer from system prefs and re-added them. More than once. ;-)
Any ideas?

Though a day late & dollar short, I too encountered this issue with Yosemite.
After removing the paper & restarting the printer, I determined the issue to be related to the document. The document I was printing was sent to me from an international corporation. Which I figure was using a non-US paper format or a larger page format for the document.
I tried to change those within the document & was unsuccessful.
I copied the content to a new document & it printed fine.

Outgoing Check pld printing error

Dear all,
I am setting PLD for outgoing check in check for payment window. My check size is width=200 mm height= 95 mm.
In tally my client print check by using normal printer with these measurements in Letter paper format.
I am using paper source letter with width as 566 and height as 269 ( this is the conversion value from mm). All margins as zero, and four database fields- vendor name , check amount in words, check amount in numbers, check date. But this setting gives me printing error. I am not able to see its preview.
Kindly give your suggestions.

Hi,
1. Try to change the paper size to normal A4. Is it working with this paper size?
2. On which area do you have those fields?

J4540 "Borderless Printing Error"

I'm attempting to print a booklet, side-fold brochure. My paper size setting is Borderless 8.5X11. I've printed this brochure many times before using the exact same settings with no problems. However, when I tried to print today, I had only a black ink cartridge installed; I got an error message reading "Borderless Printing Error: Borderless printing cannot occur with only the Black Ink Cartridge installed. To print a Borderless Photo, install either a tri-color print cartridge, or a photo print cartridge."
Even though the brochure I'm printing is black & white (and it was set on "print in grayscale"), I did have a new Officejet 901 Tri-Color Ink Cartridge handy. So I installed it and received a message that the new cartridge had been detected. Then I scanned the sheet to align cartridges. The printer said something like "Installation successful". However, everytime I try to print this brochure page, I still get the same error message: "Borderless Printing Error: Borderless printing cannot occur with only the Black Ink Cartridge installed. To print a Borderless Photo, install either a tri-color print cartridge, or a photo print cartridge."
I tried re-starting, unplugging, etc., but I can't get it to print -- even though I'm using the same settings I have before. I went online and tried printing a couple of color pages and it printed them out just fine -- so the color cartridge is working. Not sure why I keep getting this message.
I'm no expert on this stuff, and any help/advice would be appreciated. Thanks a bunch,
Jason

I wish I could help you, and I'm unhappy to see that you put this message up in April and have no response yet.
I too get this "cannot print" message - not that the cartridge is missing, but that I cannot do borderless printing with ONLY the black cartridge. I have the color cartridge installed, I've done prints of the same pages before, and I cannot seem to get the printer (HP Photosmart C4780 wireless) printer to work when that message comes up. I'd love to get some help from HP.
     Some things I've tried. On my iMac I shut down all applications that are not necessary, and relaunch my finder. I think that clears out its brain a little. Then I'll try to print again (It just worked - same exact page).
     Also, sometimes I open the HP Utility and ask it to print a test page. That also seems to clear it's brain. After that it worked also.
    I think there's a sometimes "glitch" in the program. Cleaning things out as much as possible, and starting over again seem to help. GOOD LUCK!

Photosmart c7180 paper jams & wrong paper size errors

About 5 weeks ago I bought an ASUS computer with Windows 7, 64 bit and installed the drivers for my printer from the hp website. The printer is hooked up to my wireless network. No problem. 3 weeks later I have constant paper jams, I did the standard clean out paper, clean dust off of rollers and while on, unplug plug from back of printer then from outlet and wait a bit then plug back in. I was able to print a test page then it started happening again, sometimes reporting a paper jam error, sometimes a wrong size paper error, and sometimes an out of paper error. I also noticed that the rollers seem to be trying to grab the paper really fast (faster than they normally did). I have had this printer for many years-not even sure how many-and have hardly had an issue with it ever. I love it.

HI CFox,
Here is the link to the support document for paper jams for your printer. This is the most comprehensive document for paper jams on your printer. Let us know if this works for you or not.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Large paper printing in Deskjet F4180

Hello,
I'm trying to use my Deskjet F4180 to print a paper the size of 21x100 cm. meaning, the width of a normal A4 (therefore fits in to the printer's paprt feeder) - but LONG.
I am printing from Indesign, on a mac, mac os x 10.6.3
I believe it should be possible because I did the exact same thing with an older model of deskjet I used to have (don't remember the model number), indesign and all. back then it worked fine.
but now it doesn't work somehow. I define the paper size at the "print > page setup" in indesign, make sure that the paper is fed from its short side, then get an error message from the printer saying I have a paper size error.
does anyone know how to do it?

Are you using 4x6 paper? And is the photo you are printing 4x6 or autofit?

I cannot clear my paper jam error?

I clean out the back of the printer to get rid of the paper jam error, only to get the paper jam error again when on half of the sheet goes through the printer.

Is your printer the Photosmart 8050? If so see the troubleshooting page here. If not please read this post then provide some details. What printer model?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer error message

Printer error message
Printer hp LaserJet CP1525nw
Windows 7
The following message is displayed when sending any file to the above printer.
"hpmns115.dll has stopped working"

Hi jwnova142 ,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Size Error when attempting to print.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with the 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

No paper print error

Similar Messages

Maybe you are looking for