Outgoing Check pld printing error

Dear all,
I am setting PLD for outgoing check in check for payment window. My check size is width=200 mm height= 95 mm.
In tally my client print check by using normal printer with these measurements in Letter paper format.
I am using paper source letter with width as 566 and height as 269 ( this is the conversion value from mm). All margins as zero, and four database fields- vendor name , check amount in words, check amount in numbers, check date. But this setting gives me printing error. I am not able to see its preview.
Kindly give your suggestions.

Hi,
1. Try to change the paper size to normal A4. Is it working with this paper size?
2. On which area do you have those fields?

Similar Messages

Error Outgoing Payment PLD printing

Hi All,
Please help us with PLD.
We encounter error when there are more than one invoice selected in the outgoing payment.
We need to put in the repetitive area all the paid invoice selected in the outgoing payment
Header data
Payee
Bank name, branch and account no
Check no
Repetitive Area
AP Invoice no
AP Invoice remarks
AP invoice Applied amount or paid amount ( Local Currency)
AP invoice Applied amount or paid amount ( Foreign Currency)
AP Invoice Customer Reference
Regards,
Amy

hi,
Create a customized query & create a report using query print layout designer.
It will solve problem.
Jeyakanthan

HP printer error: computer is no longer able to communicate

I have an OfficeJet L7680 and a G5 iMac running OS 10.5.8. And for the last six months, every time I installed new software or hardware ANYWHERE the printer stopped communicating with displayed this message in the print queue window:
"Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on"
The standard 'fix' on this is to manually un-install the print driver and reinstall it. After doing this 3X on 3 computers, I discovered that running HP Setup Assistant seems to fix the problem -- so far, anyway.
I know that many people have had this problem with generations of OS/X and HP printers, so I hope this is helpful.

I just had a similar problem. I had a hard drive going bad and put in a new one and used time machine to recover from. For what ever reason I started getting the safe error message when I tried to print. The only solution I found that would work was to delete all of the printers and then reload.
Strange to say the least. I have never really had any printer problems.
CD

AP Check PLD Not Printing Stub Information

Hello,
When printing an AP Check (PLD stub-check-stub) for a misc vendor (outgoing payment -> account). The stub portions does not print any data, only prints text. It does print fine for vendors.
How do I get the stub information to print for these type of checks? We are on 8.8 PL12.
Thank you,
Ron Moore

Hi Ron Moore,
I am afraid if you want to print checks for those misc vendors, you need to create at least one vendor so that you can print regular check with stub. This vendor's name can be changed from time to time but with the same code.
Thanks,
Gordon

Outgoing/offline mail server errors (143 /and/ SSL checked?)

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

I have a Canon MX882 and more often than note get an error message saying the printer is not connected. I check the printer and the get the message that the access point is accessed. I have reloaded the software and it worked for awhile. Any ideas?

I have a Canon MX882 printer and more often than note get an error message that says "Printer not Connected." When I check the printer itself, I get confirmation that the access point is connected. I tried reloading the software and that seemed to have solved the problem for awhile but I'm experiencing the same problem. Any ideas what is causing this?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

How to Print the Account Balance in Outgoing Payment PLD

Hello Experts
How to Print the Account Balance in Outgoing Payment PLD
Dixit Patel

Hi,
you can use udf in the outgoing payment to record the vendor's account balance and then using the query FMS ;
select balance from ocrd where cardcode = $[$4.0.0]
Assign the query in the UDF so that each time after entering the vendor code, the balance appears.
After add the payment, the balance is recorded.
In PLD, you can create the UDF field to make the balance appears in the outgoing report.
Rgds,
JimM

Pc2510 Check Right Printer Cartridge/Not Supported/Hourglass Errors

Hello!
If anyone has had success resolving these errors, please let me know, even if it has meant replacing your print cartridge. Thanks!
Error Description:
Original problem: The printer cartridge error message "Check Right Printer Cartridge" is blocking any use of the psc 2510, including scan and nonprinting noncopying functions.
Current problem:Hourglass freeze accompanied by printer sounds (alignment?) which stop, but screen message never advances past hourglass..
Summary of Troubleshooting:
I received an error saying: check cartridge in right stall. Tried cleaning contacts on printer cartridge and printer contacts with distilled water. In process of employing other tactics in online tutorial, I tried unplugging power while the printer was open. Ever since, it just runs through hourglass and printer sound, but does not advance past this screen icon.
Customer Technical Support:
Suggested a semi-reset of # and 6 keys plus unplug and replug or try new print cartridge. When asked if there was anything I could try before purchase of a new cartridge, suggested I unplug and hold power buton for 10 seconds, then replug. (Full description of these at bottom). Upon further research, representative suggested an upgrade.
Hourglass fix attempts employed from forums:
Tried to plug into wall outlet vs. power strip. (Fully plugged in loose connection to brick when noticed was not in all the way.) Reset modem. No results.
What I Haven't Tried:
Have not tried a new printer cartridge until have exhausted all non-monetary fixes.
Full Description of Troubleshooting:
The first error: check cartridge in right stall occurred suddenly after problem-free use.
The contacts on the black cartridge were cleaned but the error persisted.
After disconnecting use for a time, I reconnected last night to troubleshoot printer cartridge error on current Mac machine. Installation was completed successfully.
The same error occurred once setup was complete.
I performed the following:
1) cleaned contacts on black cartridge using distilled water.
2) unplugged power cord (per post in forum)
3) unplugged power cord and tried pressing cancel/left arrow (per same post in forum)
4) cleaned contacts behind black cartridge on printer
5) removed black cartridge, closed machine and got insert black cartridge error (attempt to determine which cartridge was the problem)
6) Even though this message appeared to indicate the black cartridge was the problem (per web support article) I cleaned the contacts on and behind the color cartridge as well.
In the course of all of this trouble shooting I got a second error: "Print cartridge in right stall not supported."
I noticed that the fit is looser than in the color cartridge. I inspected the spring and cartridge area for damage and found none. Cleaned dirt however below contacts on machine.
Also, at one point during the trouble shooting I was able to get to the scan menu but then it quickly reverted to the first error message.
7) Per general support article online, I tried unplugging the power while the lid was opened (as indicated during cleaning of cartridges.) This information was not in the manual that came with my machine. I was hoping this might reset things.
Then I got the third error: a period of sounds of the printer (alignment?) followed by hour glass on screen.
The 2510 appears to be frozen. No buttons like cancel or menu or on button caused any response.
I unplugged it again (this time with the lid closed) and got the same series. A period of sounds like alignment and then a halt of sounds with the hourglass still on the screen.
Customer Service Rep sent the following:
Email 1:
1.      While the printer is powered on, without turning it off, unplug the power cable from it.
2.      Press and hold the # and 6 keys together and while you are holding them, plug the power cord into the printer
3.      Hold the keys for about 30 seconds, while the printer tries to power on, and release the buttons.
4.      If the printer turns off, use the on button to power on the printer, and follow the instructions on the display.
If it still comes up with the same error, I request you to try with a new black cartridge and get back to us with the results.
Email 2:
1.      While the printer is powered on, without turning off the printer, unplug the power cable from it
2.      Press and hold the on button for about 10 seconds and release it.
3.      After about 1 minute, plug the power cord back and try powering on the unit.
The reason I suggested to try with a new cartridge is because whenever the printer powers on, it does a self test to make sure all the hardware components are working fine, which includes the cartridges. So if there is any error with the cartridge, then the printer might freeze if it is unable to determine the cause of the issue or the point of failure.
Email 3:
I did some research and the issue seems more likely with the hardware of the printer.[...]
If the issue persists, get back to us with the information below for upgrade options for your printer.
Forums:
I then tried unplugging from power strip into wall outlet and resetting modem without result. Noticed blue light for wireless connection is no longer on.
Message Edited by allinfun2510 on 05-04-2009 05:46 PM
This question was solved.
View Solution.

I had the same issue with my 7610 (error=print cartridge not installed correctly), and tried some of the listed suggestions - opened up another brand new cartridge - same issue; put the old one back in - same issue. So I knew it wasn't a defective cartridge, but rather something wrong with the spring that supports the cartridge, because it didn't seem to 'click' in correctly anymore. Compared the spring on the black (right) side, to the color (left) side, and saw the spring hanging down. Put it back in place a couple times - still without success - until I looked closer and saw that part of the plastic that holds the spring in place must have just broken off. Tried t a little piece of tape to hold the spring in place, and finally, the cartridge worked - for now. Hope this helps someone else if they're having the same issue. Good luck!

Error in FP50 - Manual Outgoing Checks Lot

Hi Experts,
I am getting error while I am creating outgoing check using FP50 - Account determination not possible for key 7777 / /CS /0600 /0020.
I have maintained the main sub 0600 0020 in SPRO at below path - Financial Accounting (New) --> Contract Account Receivable and Payable --> Basic Function --> Check Management --> Define Details for Lots for Manual outgoing Checks.
As per my understanding, we don't need to maintain the main sub 0600 0020 i.e. outgoing payment in posting area R001. While using FPY1, outgoing payment is successfully created with the same main sub 0060 0020.
Any help will be highly appreciated.
Thanks and Regards,
Mansoob

Hi Dewang,
Thanks for your reply.
I already know that this error indicates to maintain a value for 7777 / /CS /0600 /0020 in EK02. But in real scenario, we don't need to maintain any values for outgoing payment in EK02.
When I am creating outgoing payment using FPY1, then outgoing payment with main sub 0600 0020 is successfully created. So it confirms that we don't need to maintain a value in EK02 to post the outgoing payment with main sub 0600 0020.
I am getting the error while creating the outgoing payment using FP50. I think there would be some configuration missing in SPRO for FP50. I searched a lot but could not find something concrete.
Please let me know if you have any idea.
Thanks,
Mansoob

Printer Error: Remove and check cartridge on right.

Printer Error: Remove and check cartridge on right. I have a HP printer Officejet 7310 All- in-One. I have tried taking the cartridges out, shutting off the printer and unplugging the printer but nothing helps. The cartridges are correct ones; the problem started after I was using these cartridges for a while.
Please Help, Mitzi

Check out this post in this forum and see if this helps.

E-Mail print error; check SmartForm or printer definition

Hi Team,
We are facing an issue when we try to print the email in SAP CRM 7.0. Getting an error saying -Mail print error; check SmartForm or printer definition.
Any pointers on this how this can b resolved will be of great help.
Have gone through the similar sdn thread, not able to really understand how the issue was resolved.
Error when printing an email > CRM_IC_APPL_UI_CHMSG
Regards,
Udaya

Hi Udaya,
Try to maintain a default printer for a particular user in t-code SU01 (on Defaults tab -> Output Device).
Then, when you print again it will generate a spool order for chosen printer (can check on t-code SP01).
Kind regards,
Garcia

Error 0x00000709 operation could not be compleated Double check the printer name etc.

After installing my new printer and removing all other printers from my computer I now can not make the only printer listed as my default printer. I get this error 0X00000709 operation could not be completed Double check the printer name and make sure it is connected. I have done all that over and over again. I also I have reinstalled the old printer software and tried to default to my new printer at that time and still the same error. I have checked my register and it has the old printer listed but does not allow me to change it. I now have removed all but the new printer from my computer but I still can not make it my default printer. Programs such as Adobe only recognizes the default printer (which is not there any more) and don't even list the new printer as an option. The printer works just fine accept with the programs that uses the default printer. The Windows Hardware and Device Troubleshooting finds the problem (printer not set as default)but can not fix it.
I sure wish someone out there could help me get rid of the error and allow me to default my printer again. I have noticed other people have had this same issue with error 0X00000709 using other Windows versions as well. I have been trying to resolve this issue for the past three months and would appreciate any and all ideas.
I have an HP Pavilion elite HPE 337C computer running with Window 7 and I installed my new HP LaserJet PRO CM1415fnw color MFP printer. My old printer that I removed (but is still listed in my Regester) was an HP 6500 inkJet.

After doing some research on the net:
This link provided an answer:
https://exploreb2b.com/articles/solving-error-0x00000709-cant-set-default-printer-problem
Regedit -> HKEY_CURRENT_USER -> Software->Microsoft->Windows NT->Current Version->Windows
One of the entries you should see in the right hand pane is“Device”. If the value for “Device” as noted under the “Data” area is anything other than the printer you are using, then highlight “Device” in the right hand pane with the mouse and press the delete key to remove it. (I edited it and put the name of the printer I wanted to be the default)
VI. Restart the computer so it starts with the altered Windows system registry. (Italics mine)

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Crystal Report Print Error

Hi I am having the strange issue.
When my application is running as windows service, the RAS engine is not printing the report.
I am getting the below error.
//Code Snippet
     PrintReportOptions printOptions = new PrintReportOptions();
     printOptions.setPrinterName(printername);
     printOptions.setPaperSource(PaperSource.auto);
     printOptions.setPaperSize(PaperSize.paperLetter);
     printOptions.setNumberOfCopies(1);
     printOptions.setCollated(false);
     rcd.getPrintOutputController().modifyPageMargins(850, 250, 250, 250);
     //Print report.
     rcd.getPrintOutputController().printReport(printOptions);
Any one could help me on this?
Thanks
Sumathi
Msg:java.awt.print.PrinterAbortExceptionStack:com.businessobjects.crystalreports.viewer.core.f.print(Unknown Source)
sun.print.RasterPrinterJob.printPage(RasterPrinterJob.java:1936)
sun.print.RasterPrinterJob.print(RasterPrinterJob.java:1431)
com.businessobjects.crystalreports.viewer.core.f$a.a(Unknown Source)
com.businessobjects.crystalreports.viewer.core.f.a(Unknown Source)
com.businessobjects.crystalreports.printer.bean.a.ck(Unknown Source)
com.businessobjects.crystalreports.printer.bean.ReportPrinter.print(Unknown Source)
com.businessobjects.crystalreports.printer.bean.ReportPrinter.print(Unknown Source)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.crystaldecisions.sdk.occa.report.application.PrintOutputController.printReport(Unknown Source)
com.crd.report.crystal.CrystalReportUtil.exportReport(CrystalReportUtil.java:2094)
com.crd.report.biz.CRDReportingFactory.exportReport(CRDReportingFactory.java:336)
com.crd.report.app.ReportingImpl.generateReport(ReportingImpl.java:115)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.crd.services.ServiceProxyFactory$LocalHandler.invoke(ServiceProxyFactory.java:374)
$Proxy19.generateReport(Unknown Source)
com.crd.exporter.router.DefaultReportWriter.generateReport(DefaultReportWriter.java:50)
com.crd.exporter.router.Router.route(Router.java:286)
com.crd.exporter.router.Router.dispatchPackage(Router.java:191)
com.crystaldecisions.sdk.occa.report.lib.ReportSDKPrinterException: Report could not be printed.---- Error code:-2147467259 Error code name:failedStack:com.businessobjects.crystalreports.printer.bean.a.ck(Unknown Source)
com.businessobjects.crystalreports.printer.bean.ReportPrinter.print(Unknown Source)
com.businessobjects.crystalreports.printer.bean.ReportPrinter.print(Unknown Source)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.crystaldecisions.sdk.occa.report.application.PrintOutputController.printReport(Unknown Source)
com.crd.report.crystal.CrystalReportUtil.exportReport(CrystalReportUtil.java:2094)
com.crd.report.biz.CRDReportingFactory.exportReport(CRDReportingFactory.java:336)
com.crd.report.app.ReportingImpl.generateReport(ReportingImpl.java:115)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.crd.services.ServiceProxyFactory$LocalHandler.invoke(ServiceProxyFactory.java:374)
$Proxy19.generateReport(Unknown Source)
com.crd.exporter.router.DefaultReportWriter.generateReport(DefaultReportWriter.java:50)
com.crd.exporter.router.Router.route(Router.java:286)
com.crd.exporter.router.Router.dispatchPackage(Router.java:191)

Hi,
Can be a permissions issue.
Try giving the ASPNET account full control on Temp folder :
    . Right-click the folder and select 'Properties'.
    . Go to the 'Security' tab and click the 'Add' button.
    . Select the 'ASPNET'. Click 'ADD'. Click 'OK'.
    . Check 'Full Control' from 'Permissions for 'ASPNET'.
Sincerely,
Nikhil Dharme

Getting printing error while issuing the excise invoice with cust. O/P type

Hi,
I have created a custom output type and form and tried to issue it with the transaction J1IS. But it is always giving me error saying "Printing Error". I checked and didn't find any error in the SAP Script.
Thanks,
srinivas.

Hi,
The error could be due to various reasons.A good starting point though would be to check if your page margins do not exceed the printer boundary.
Regards,
Neil.

Outgoing Check pld printing error

Similar Messages

Maybe you are looking for