No picture, just sound ?

I can only hear the Apple TV's menu ... I dont get any picture. Any ideas? I know its in the right port. I connected component and HDMI and both do the same. Anyway to reset the Apple TV with the remote? or is there a button on it somewhere?

Chris
Is this an out of the box issue or have you had it all working previously. There is no external reset button that I know of, perhaps a power down and remove all cables for 30 seconds might help but it doesn't sound as though it will to me. This sounds like it might be a failed unit to me.

Similar Messages

  • Local cable channel - no picture just sound

    I keep calling and emailing Verizon about the two local access channels that have no picture, just sound.  I can't get them to fix it.  How do I get Verizon to fix this problem.
    Thank you for your help.

    http://forums.adobe.com/thread/1195540

  • No Picture just sound on Apple tv

    I have a video i shot, and loaded it into my itunes and wanted to airplay it through my apple tv. It doesn't show up on my apple tv movies menu, and when i play it through itunes and hit airplay, i can hear it on my TV, but i get no picture.??
    thanks.

    Its a video shot on a Panasonic HVX-200. edited on Final cut Pro, and exported as a quicktime. It's loaded into
    my itunes movie library, but does not appear on my apple TV movie library.It plays in my itunes just fine, and it plays on apple TV, but only the sound, no picture. The movie is 12 gigs, don't know if that makes a difference?
    thanks.

  • Movies, no picture, just sound on iPod

    I have 5th Generation (30gb) iPod(2yrs old). I purchased 2 movies from the iTunes store. They show up and play in iTunes. I synced to my iPod, they both show up in the movies, but only the sound plays. On the screen no movie, just a little thumbnail of the movie and a progress bar across the bottom. This is the first time I have messed with movies and I have no idea how to correct this. Can anyone help me please? I wanted to watch these on my vacaton flight and I am leaving this Friday. I am very frustrated, I have been searching the support website for days to no avail. HELP!

    On your iPod go to "Videos / Video Settings".
    Then select "TV Out" and either set it to "off" or "ask".
    Also, make sure you are accessing the video through the videos menu. If you have a video mixed in an audio playlist and you access it through that, you also won't be able to see the video.

  • Bought musicvideo - no picture, just sound

    Hallo
    The music videos i've bought in itunes don't work anymore. I only hear the sound, but I can't see anything - the whole video it's just dark.
    I've already tried to move the video on the desktop and open it with Quicktime - no success.
    Does anybody know how I can fix this problem? I don't want to buy the videos one more time.
    Ps: My iTunes-version is 10.1

    Can't speak for videos in iTunes, but if QuickTime is only giving you sound, you may need to get the Perian codec pack.. http://perian.org/
    Try that.
    Deb.

  • No picture - Just Sound on Quicktime

    When watching an AVI file in quicktime, I am hearing voices, but do not see a picture. Can anyone assist?

    http://perian.org
    Free. Try it.

  • No vids on website but just sound?

    I've been using playthisriff.com which uses quicktime, But recently i can't get a picture, just sound. I'm sure my itunes updated recently & was wondering if that has something to do with it?

    Your original movie is 800 x 437.
    Your OBJECT code in HTML is 500 x 216.
    Your displayed size is 366 x 216 (including 16 pixels for the controller), since scale=aspect.
    I found that in Windows, movies that have not the same displayed width and height as the original will not show.
    To avoid that, make sure that the displayed width and height are the same as the original size.
    Two steps:
    1. Resize your original movie to 366 x 200. It's proportional. Or use 400 x 219, which is half size of the original.
    2. Set width and height of OBJECT (and EMBED) to 366 x 216 (including 16px for the controller). Or 400 x 235 (including 16px for the controller)
    See if that helps.
    Also, I noticed a param error in your OBJECT code:
    <param name="type" value="video/quicktime" *height="216" width="500"* >
    The width and height shouldn't be there.
    Message was edited by: Wyodor

  • HT1551 Do you have to have a certain Hdmi cable for sky go to stream picture not just sound?

    Do you have to have a certain Hdmi cable for sky go to stream picture not just sound?

    hdmi is a std which always stream both picture and audio
    but when you say sky then connecting the atv to a middle box hdmi switch is a hit or miss if it can be don
    really comes down to the switch in this case the sky one

  • Connecting a macbook to a tv:  correct cables, still no picture or sound

    I have the correct cables connected securely and I have no picture or sound displaying on the tv.  The mac screen "blinks" once when I unplug the adapter, so it is aware that it is connected to something.
    Current setup:  2010 13" Macbook--> Mini DisplayPort to VGA adapter --> VGA Display cable --> Toshiba TV. 
    Also:  Macbook--> Stereo Mini to RCA Y Cable --> TV.
    If I hit system pref--> displays --> detect displays, nothing happens.  The tv is showing its default "I have no dvd in me so I will do nothing" screen.  I have tried changing the channel and input on the tv, restarting my computer, turning the TV on/off, unpluging and repluging cables, all to no avail.  The tv plays dvds just fine and is otherwise in working order as far as I know.  What's wrong here?

    Input button already tried.  It doesn't do anything.
    New thing:  a display icon has now appeared on the top of the screen.  I selected "turn on mirroring" which my television has blatantly ignored.  No progress.
    Also:  guy at Best Buy seemed pretty sure that the RCA cable mentioned previously would do the job for sound, not that that is working either.

  • Movie has no picture or sound

    I just bought star trek on blueray and it came with a digital copy of the movie.. which i downloaded to itunes.
    I havent used this program for years.. but when i play the movie no picture or sound come up, but the timer is running like its playing something.
    other than the cover and the chapter pictures i see no movies whatsoever

    I've got a similar problem with downloaded movies. The timer runs, the chapters show up and the title of the movies but no audio or video. Contacted iTunes support where I got little to no support. Have done a clean removal and reinstall of iTunes and Quicktime but still nothing. I have a couple of older movies in my library that do play fine so problem seems to be in recent downloading? Corruption? Have tried 3 different downloaded and still nothing! paying for movies I can not watch is getting old fast!

  • No picture or sound on downloaded video from iTunes

    I recently purchased a video from the iTunes store and I searched the forums for nearly an hour and couldn't find anything that helped. The file was rather large (2.18 GB). When it had "finished" it had an error mesage next to it "Network Connection Refused" or something along those lines. After that, it did not automatically load the videos into my "purchased" playlist. I had to manually track down the finished downloaded file on my hard drive. I added the file to my library in iTunes just fine, but if I try to play the video from iTunes (or after I loaded it onto my iPod for that matter)I just get a gray picture and no sound, yet the movie slider is showing the 3:07:55 and is moving as if a movie is playing. I haven't had any trouble with this in the past with music videos or podcasts or anything like that and I have sufficient space on my hard disk. Any suggestions would be greatly appreciated. Thank you for your time.
    Dell Inspiron 1501   Windows XP   Laptop

    I have all the drivers updated for Vista Business (I have switched from XP Pro to Vista Business since I posted). When I had XP Pro all my drivers were up to date as well. I have had several videos work from before. What was interesting though was that because the file was so large (2.17 GB) I had to let the computer sit overnight. When it finished though, there was a network error of some sorts, though it showed that the download had completed. I said "OK" and thought that it would put it into my purchases playlist, but it did not. I had to track down the file manually and imported myself, but what I get is a gray screen when trying to play in iTunes 7 and a black screen when on the iPod. The interesting thing though is that the slidebar for the time is moving with no picture or sound. I think there may be something I need to do to the file, but not quite sure. Any ideas? Thanks!

  • NX: Makes picture taking sound, but photo screen is completely black.

    I've got awesome lighting in this room. And even if that wasn't true, I literally took a picture of the light, and it was still completely black. I mean.. It makes the picture taking sound, but the square the remains black. What in the world.. The light is constant green on the webcam. It's plugged in correctly, or so as far as know. I'm usually good with computer things.. But I think I'm going to take the dumb 6 year old blonde excuse for this one. Any ideas..

    I have the same problem with NX Pro. After finallygetting it to work with my ancient Pentium 2, all programs (Creative software that came with the camera and also other 3rd party software, such as Watcher). All of the programs only show only complete black. I tried the camera on another machine and it worked just fine so it's a computer issue.
    I've updated video card drivers, ann Windows 2000 updates from MS (currently have SP4). What I found out was that if the camera was plugged into the other USB port of my computer, Windows would crash to BSOD when starting any of the camera software. When moving it to another port, I no longer get crashes, but this annoying black screen. Could it be related to USB?

  • TS3694 MY IPhone will not let me back up or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?

    MY IPhone will not let me back up my phone or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?

    Contact iTunes to re-enable your account at expresslane.apple.com
    You can reach them by chat or email.

  • Insert picture and sound without external sources

    how can we insert pictures and sound without using external sources??
    i mean , i want to make the picture somehow embeded inside the program, not from external source,
    can any1 help?/

    I sense that what you need to do is create a Jar (java archive) file for your code and images and any other resources. Do a search on the forum for the terms -- jar pictures getresource -- and you'll get a ton of helpful threads. Also check Google. Some useful links:
    http://java.sun.com/docs/books/tutorial/deployment/jar/
    http://forum.java.sun.com/thread.jspa?forumID=54&threadID=5183949
    http://www.cs.princeton.edu/introcs/85application/jar/jar.html

  • Yikes, Box is Working but no picture or sound...tv guide is showing current though....

    Ok, I checked the tv, it works fine with vcr, so the pic and audio is good. the box is functioning, changing channels and such. the guide comes on to tell you what is on at that time and shows current, but no picture or sound....whats up with this??? I am in FL. Thanks for any help!
    C-

    You might want to check your Fios TV page on the website to see if it says "Your STB record cannot be found". I started having this problem today. Everything was fine last night. I got forwarded from Verizon to somewhere else where they were supposed to add my boxes back in. The individual said it was done and I should have the picture back momentarily. I waited 1 and a half hours. Called back. gave them the "M" numbers for my 2 boxes. They said it would take up to 24 hours to get the picture back. Unfortunately that doesn't help me when their is boxing on tonight that I want to watch. If it is not fixed in time for football tomorrow I am not going to be happy.

Maybe you are looking for