No places in "Manage my Places"

I have placed a number of pins around the places map for some different projects. These are all given names that bare no reference to the place except the country or some other random road name. If I go into Manage my places, none of my pins appear and I therefore cannot rename them. Am I doing something wrong?
Regards
edit: I just noticed that if I deselect everything from the sidebar and then choose places from the toolbar (its greyed out if anything in the sidebar is selected) none of my pins are there. If I choose places from the sidebar the pins appear on the map...

I have some similar weirdness going on. The GPS information is correct but the name is not some are not. This would not be nearly as annoying as it is if it was possible to edit that name but I have searched for hours and have not found a place to edit the name. In my case the images were shot in Mexico and the GPS information says Mexico but the place name on some of the images are locations within a 15 mile radius of my house. Just bizarre

Similar Messages

Profile manager shows only one profile but I have two profiles located in the same place and I want to change

I have had a Firefox crash and uninstalled then reinstalled three times. For some reason Mozbackup won't back up my files. In checking profiles, I have two profiles with different names and both marked default, located in the same place. I would like to use the old profile but the profile manager only shows one profile.
How can I get to use the old profile?
Thanks, Joe

Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users.

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

"Discovery Manager" role cannot place a mailbox on hold

My Company is testing Exchange 2013 and Exchange Online. We would like to have all discovery functions managed by our legal team. We have assigned test users the “Discovery Manager” role. That role should allow them rights to search all mailboxes
and put search results on hold. Additionally, the discovery manager role should allow them to select a user mailbox in EAC, open the "Mailbox Features" page and enable litigation hold on the mailbox (no searching required).
We have found the second feature, enabling litigation hold without searching, is unavailable to discovery managers when using EAC. The "Mailbox Features" page is not exposed to discovery mangers using EAC. The discovery manager can place a mailbox
on hold using PowerShell but that would not be a reasonable option for our legal team.
Please confirm if my understanding is correct, discovery manager should be able to place a mailbox on hold as well as in-place hold using EAC.
Thanks in advance,
Ron

Does "Get-RoleGroup "discovery Management" | FL *role*" show that the Legal Hold role is assigned to the Discovery Mgmt role Group? If so, then you may need to assign the "Recipient Management" or "Help Desk" role to those users as well or if you wish
to security trim their access, create a customized RBAC role for them.
Alternatively, see if they can simply set litigation hold via Powershell with set-mailbox
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Map doesn't appear in Manage My Places

My "places" in iPhoto seem to be functioning OK except that when I click on Manage My Places no map appears to the right of the list of My Places - there is just a dark grey square. Any ideas what theporblem could be?

Yes.
If I deliberately break the internet connection and then re-connect the map appears. Hardly a stisfactory solution though.

[solved] dolphin file manager losing all custom places entries

Hi all,
I am getting phantom problem with dolphin file manager, i added custom place entries there but suddenly they diappear from dolphin.
There is no any pattern in disappearance. They appear for few days without any problem, even after shutdown/reboot. But suddenly some day they disappear and i have to add them again.
I want to find cause of this problem then fix it.
Or at least find config file where dolphin store configuration about custom places that i can backup and restore to get back entries.
I checked ~/.kde4/share/config/dolphinrc but couldn't find there anything about custom places.
I am using KDE 4.14.5 and Dolphin 14.11.97
Last edited by samtech09 (2015-02-16 13:02:09)

Hi samtech09,
dolphin stores the configuration of the custom places in ~/.local/share/user-places.xbel.
The problem you described has already been reported upstream: https://bugs.kde.org/show_bug.cgi?id=343735
Last edited by mauritiusdadd (2015-02-16 11:30:50)

Place Management Data Warehouse in an Availability Group

Is it possible to place the SQL Server Management Datawarehouse in an Availability Group in order to have high availability? If so, what happens during failover? Is there any extra configuration needed on the secondary replica(s)?
Thanks,
Robin

Hi Robin,
According to my knowledge, you can place the Management Database Warehouse (MDW) database in an AlwayOn Availability Group. And there’s no extra configuration needed on the secondary replica(s).
During a failover, the target secondary replica transitions to the primary role, becoming the new primary replica. The new primary replica brings the (MDW) database online as the primary databases.
For more information about AlwaysOn availability group setup, please review the following article:
http://technet.microsoft.com/en-us/library/ff877884.aspx
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.

Fund Management- Business place

Dear Team,
In fund management, i am creating request of payment Tcode F871, fi document is created in background and get parked, such request is released Tcode F874 and ultimately posted Tcode 870.when posted FI document which was parked while request creation gets posted.
My question is about the field " Business place" and " Section Code" which is neither available at the time of creation of request nor available at the time of posting of request.
SInce Business place field ( BUPLA) is blanck, TDS certificate can not be generated.
Please advice how to get " Business place" field in F871/ F870
Thanks,
Nilesh Pitale.

Hi,
maybe this document will help you more:
http://perlhosting.net/download/968192356.html
SAP78V

My audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic

my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
any help please im going out my mind
regards james

Thanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
Again thanks for replying
Regards James

Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show u

Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new Premiere Elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

IPhoto's 'Manage my Places' has stopped showing map and pins!!!?

I am using iPhoto '11 version 9.2.3.
Recently I stupidly decided to undertake the task of adding location info to all of my extensive library, spanning approx 15 years and a ridiculous amount of individual locations.
Anyway this task will now eat away at me until i have completed it, (or something similarly unnecesary takes over)
So, i've been at it for a few weeks now, but all of a sudden today (haven't been on it for a few days so may have started a little while back) i am now unable to edit the size of the 'vicinity' around a pin.
I am selecting 'Manage my Places' tool from the 'Window' menu at the top of the screen as i was before. But now, when the list of my places comes up, to the right, there is no longer a map with the pins from the hilighted 'place'.... it is just grey as the pic below shows.....
This is now hugely frustrating for me, as you can imagine. Does anyone know anything about this? or are having the same issue?
Thanks in advance for anticipated response.....

@MacFishy,
I had the same problem with IPhoto '09 8.1.2 The maps in Places disappeared on June 2nd.
I was able to fix Places by DOWNLOADING SAFARI and RE-INSTALLING.
A Best Buy Geek Squad tech fixed my Places on June 3rd. He told me the problem was with Safari, not IPhoto. However, I don't know what he did to fix the problem. (He could not have re-installed Safari without me knowing)
Unfortunately, the maps disappeared a week later. I used the Geek Squad again, but could not contact the same tech. Several techs tried, but could not fix Places. The last tech directed me to Apple.com.
I was able to restore the maps for the individual pictures from discussions on Apple.com by turning the WiFi off and on. The large world map did not return.
On June 24th, I went to the Genius Bar at the Apple Store. Interestingly they were unaware of the Places problems. When I mention that a tech said the problem was Safari, not IPhoto, he suggested that I try downloading Safari and re-installing. Well that worked! So far it is still okay.
I hope others will find this helpful,
Peggy

Manage My Places/Google Search in iPhoto has stopped working. I have always had my Look Up Places Preference set to Never. Any ideas?

I am running iPhoto 09 v8.1.2 and w/c 18th Nov Manage My Places/Google Search stopped working. I have always Managed My Places with my Look Up Places Preference set to Never. I have not updated any software in the past week. Any ideas?

That's not my experience Larry, although I'm not an expert. It was one of your earlier responses to someone else that made me check this preference out. However, I've set it to automatically and google search in Manage My Places doesn't work and the "find on map" option on the photo information tab doesn't work.
What does works with it set to automatically is if I enter "Merida, Mexico" in the photo place it will list a number of towns called Merida and I can select the Mexican one. If I enter "Calle 49, Merida, Mexico" it doesn't list anything but it does offer the "find on map" option. If I select this it loops.
I've checked my software updates and nothing on my Mac has changed in the time between this working and ceasing to work. I'm just trying to establish if anyone else has experienced difficulty with the google search under manage my places in iPhoto recently.

No maps in "manage my places"

I have the very latest version of iPhoto under 10.8.
In the window manage my places, the maps are not shown! Just blank. This was also with previous versions, I was hoping it would be solved in the newest iPhoto.

What "newest iPhoto". It's on version 1.0.1.
This is iPhoto for iOS, not OSX. Despite having the same name, they are completely different programs. You should repost your question in the iLife/iPhoto area.

In-place upgrade of Enterprise Manager for RAC databases is not supported

upgrading 2 node RAC from 10.2.0.1 to 10.2.0.3 on Windows 2003 64 bit. I got the following:
In-place upgrade of Enterprise Manager for RAC databases is not supported in this release
Now I cannot log in to the database control as sys with sysdba role . I get "invalid username/password" error
I can login as a dba user
I also get a java error after I log in, some thing about class not found, but then I'm in and I can do everything that I try, although I haven't tried scheduling a backup yet
Can I upgrade EM to 10.2.0.3?
If so, how?

On the patchset readme...
11.3 Upgrade of Oracle Enterprise Manager Not Supported
When you start Oracle Database Upgrade Assistant to upgrade 10.2.0.1 database to 10.2.0.3 patch set, the following error occurs:
Inplace upgrade of Enterprise Manager is not supported for RAC databases is not supported in this release
Workaround:
Ignore warning.
If you drop and recreate the EM repository?
1). emca -deconfig dbcontrol db repos drop
2). emca -config dbcontrol db -repos create
Be careful, doing this put the database on QUIESCE mode.
Regards,
Rodrigo Mufalani

User Exit for putting own stock placement logic in WM (Warehouse Managment)

Hi Techi's,
I have got one requirment for stock placement in Warehouse Managment as below:
If client uses the standared strategy for putting stock in Storage Bin as "Addition to Stock" Then the self life of the coming material is being replaced by the existing material's seft life.
If they use the "Next Empty Bin" strategy than the obove issue is not coming but system always searches for the full empty bin only thus wastage of the existing bin's which already has some space.
Now what my client wants is to use the "Next Empty Bin Strategy" so that self life is not being overwritten but along with system should not search the complete empty bin for placing the stock rather it should search the bin's which already has some space then later move to the empty bin's.
For good reciept they are using MB01.
In summary its a mixture of "Addition to Stock and Next Empty Bin" Strategy.
Please suggest me the Exit for this if available or tell me the code if already has implemented it. Friends its going very hot.
Please please help me.
Thanks in Advance.
-=Maddu=-

Hi Maddu,
If I undertstand it correctly,
System should search for the available Bin Capacity, and if there is space available the next incoming stock also need to be placed in the same Bin (system should suggest the Bin).
Now, let us consider the Physical process involved. Let us say, System suggested Bin A1001 and stock of Material A 500 Qty has been placed in some part of the Bin. Now, next time for the same material while incoming, system let us assume for time being suggested A1001 Bin due to available capacity. The operator should place the stock in the same bin, right. Assume that you have two quants in the Bin so that in system Shelf life date (GR Date) is different for these two different receipts. However, while Issuing even if system suggested Bin based on Shelf Life date, how the Operator will physically identify between the above two stocks. Hence, there should be physically some more identification parameters.
Under this case, either you can have Batch Management, (two have multiple quants) or Storage Unit Management. In this way, system will suggest the Identifier based on GR Date or Shelf life Exp date, also physically some labels placed to identify the different stocks in the same Bin.
I hope, it clarifies your doubt.
Last but not the least, user Exit will not solve your purpose.. instead operation process change involved along with Batch Identifier or Storage Unit Identifier.
Please reward points, if it helps.
Thanks & Regards,
Ramkumar

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

No places in "Manage my Places"

Similar Messages

Maybe you are looking for