No red, green, yellow buttons

In iTunes 10.5.1, there are no red, yellow, green buttons at the top. Also, the command M option doesn't work. Anyone know of a fix?

Hmmm, do you mean the buttons at the top left of that window?
If so, it may not have a green expand button, only red fpr close & yellow for hide.

Similar Messages

  • Red green yellow buttons in iTunes 10

    OK, I upgraded to iTunes 10 awhile back and noticed the buttons in upper left corner of window are gray and not red green yellow. I have searched the web for fixes and came up with two
    defaults write com.apple.iTunes full-window -1
    defaults write com.apple.iTunes full-window -int -1
    These work to make the vertical to horizontal, but the color is still gone. What is the terminal entry for getting the color buttons back. Not really concerned with the icons being color at this time but would like the corner buttons color.
    Thanks

    ok...upon further research found answer to this question myself.
    http://answers.yahoo.com/question/index?qid=20091101203328AAUf8py
    thanks for listening..

  • How do I make the red-green-yellow icons and the text in window title bars larger?

    The title text is a little too small to just see - I have to concentrate on it to read it - and I can't tell the red-green-yellow icons apart without staring at them. Yes, my sight is quite poor; I'm already sitting as close as I can.

    sorry about the slang display portal, i just mean the entire screen, like a magnifying glass. There is probably a keystroke, and it's probally all in here:
    I do agree it's a concern, as I have a torn retina, and my eye gets strained quickly.

  • How do you get out of Full Screen mode in Excel? No red or yellow buttons visible.

    How do you get out of Full Screen mode in Excel? No red or yellow buttons visible. Using just installed Yosemite iOS 10.10.2

    I Don't think Microsoft updated it for those buttons. Look for a blue button with arrows in it on the right side of the menu bar.
    Also try Esc key.

  • Missing check box & Red, Green minimise buttons

    hey all ,
    After upgrading my Macbook Pro to the latest version my "red green amber buttons " are missing along with all checkbox's and borders to all system buttons.
    I thought this look pretty cool at first and thought it was part of the new system,  however i soon noticed I couldn't see any checkboxes or borders on buttons and now it's a massive pain.    (13-inch, Mid 2009 2.53 for 2 duo)
    any sugestions ?
    have inclosed a few screen shots :
    1, example of a missing check box,  (has a kind of irony attached)
    2,  example of missing buttons: borders on dialogue box buttons  :/
    help me obwan :-/
    thanks d

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Red green yellow - whats  the logic in it

    hi gurus,
    In PFCG once we get into authorization and display, some are in red and some in yellow and green. It is based on maintained, partially ,unmaintained authorizations. But, when a red changes to green and yellow change to green and green change to red. Hope u understood my question. pls help me in this.
    With regards,
    Livi

    Dear Livingston,
    The logic behind the traffic signals in the Change Authorization Data page is not as explained prior.
    The simple explanations are provided in the help legend in the same page.
    To further elaborate, when you are creating a role with a set of transactions being added to the role from the SAP Menu in the Menu tab of PFCG, SAP organizes the set of Authorization Objects and the Authorization Values as pre-defined for the transactions that is added.
    If certain transactions are left with open fields in the SAP definition these fields appear unmaintained in the Change Authorization Data page. It is the responsibility of the BASIS Consultant of the Security Consultant to fill the unmaintained fields, not just by making them red to green or yellow to green by clicking on the buttons but by finding the correct values that needs to be assigned as authorizations to the role in turn to the user.
    For example, if you have added a functional transaction to a role - a set of authorization objects depending on the dependency of the transaction are added to the role. The organizational levels which are the base of the functional working of the business in SAP are added without the specific value for the organizational value being added, as a BASIS consultant we need to analyze the role with the help of the corresponding functional consultant to identify the activity of the role and assign only the needed Organization Values. This is the situation in which you find the Authorization fields to be in RED color.
    Similar to the above mentioned case when an authorization object field is not completed with an activity for example Read, Write, Display etc access - you find the field to be Yellow when you assign a particular activity to the field the same turns to maintained level and the representation is shown green.
    The objects which are by default maintained is shown green, to generate a role completely and to effectively use the authorizations assigned we need to completely maintain the role, i.e all the fields needs to be maintained.
    By simply changing the status of the field from red to green or yellow to green you are giving complete authorizations to the corresponding activity - which is not recommended in certain categories.
    Hope the explanation is clear - let me know your response.
    Thank you
    Regards,
    Vineeth

  • Configure Overdue date with lights red green yellow

    Hi folks,
    I have a requirement to assign lights to overdue date in Agent inbox -> advanced search. When I have queried for the same in forums, i was given an SPRO path to configure, CRM > Interaction Center WebClient > Agent Inbox > Map Item Attributes to Inbox Attributes > Define Advanced Warning for Due Date. And was asked to create a Get_P method which i couldn't achieve.
    Please could someone provide a quick resolution for this.
    Many Thanks,
    Santosh

    Santosh,
    I did not try this but have seen similar requirement met through config. I am not exactly sure though.
    If indeed enhancing ICCMP_INBOX is the way you take, [this|Inbox Result List; and [this thread|Adding Customer Phone in Inbox result list; should help you out.
    Edited by: Amar Nath on Sep 8, 2010 11:21 PM

  • The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari.  I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows.  Does anyone know how to get those buttons back

    The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari.  I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications.  Does anyone know how to get those buttons back?  I guess I could just switch betwen appliations, but I am used to doing it the other way.

    You're welcome 
    You had Safari in full screen mode.

  • I can get safari to go back to old setting, can anyoner explain how to, i can go to a different web address or see the 3 colors the green ,yellow, or red buttons to click out, how do i reset, and i have went to viewfull screen nothing anyone?

    i can get safari to go back to old setting, can anyoner explain how to, i can go to a different web address or see the 3 colors the green ,yellow, or red buttons to click out, how do i reset, and i have went to viewfull screen nothing anyone?

    http/:www.apple.com/support/safari
    this is not mbp, safari, or lion community

  • Start up and stuck with the flashing color (red green blue yellow...)

    I just bought Macbook pro(My first time with Mac product) today, and when i unbox the MBP it was have a good start everything is ok, than I test the DVD drive to make sure it work or not, than i put the VCD to it. it was stuck (with the flashing color). than i dont'know what to do. I press the shutdown button around 10s the pc is shutdown...I open it again and eject the VCD, than I was stuck with flashing color (red green blue yellow...) i have try to restart many time buy pressing the button but still the same. than i keep it away for about 1hour than I open it again It was WORKING AGAIN the same as I first started, than I restart, but the same problem happen again (flashing color (red green blue yellow...).
    1. I have tried to boot from DVD that come with the MBP holding C but nothing happen
    2. I have tried to reset PRAM (Command-Option-P-R) not work
    So what wrong with that?
    Could anyone help me to fix this out?
    Thank you

    Solida wrote:
    the flashing is the Macbook pro screen it Flashing Loop, sometime red, than suddenly change to green than yellow than loop again and again.
    Notice when it first start up I see APPLE LOGO than the waiting animation round. than the random screen flashing color is happened.
    Three options:
    1. Call AppleCare.
    2. Go to an Apple Store.
    3. Go to an Apple Authorized Service Provider (AASP)

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • My iPod Touch's color is opposite (Red = Green, etc)

    My iPod Touch (generation 1) has switched to a color wheel opposite color scheme.  The green battery icon is now red. Yellow is purple, etc.  I dont think its the White on Black issue other people have.  I had my friend show me what White on Black looks like and that's not it.  Plus, I dont have a Accessability option under Settings > General. 
    Has it just finally gotten too old?

    There is not settings to change. You can only select on the preview screen where on the photos exposure (as well as focus) should be based.
    What type of natural/ambient lighting is on the  subject? that can affect the color balance.
    Does it take OK phtos in noral light where flash is required?
    You can try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store and discuss it with them
    Apple Retail Store - Genius Bar                                                              

  • FAQ: Why do I have a red or yellow bar over my sequence, and how do I render previews?

    The first thing to know is that a yellow bar isn't a sign of a problem (nor is a red bar, necessarily).
    See this article for details:
    Red, yellow, and green render bars and what they mean
    ... and this movie for a somewhat less detailed explanation:
    Why is there a red or yellow bar in my sequence?
    Here's the summary:
    green: This segment of the sequence has a rendered  preview file associated with it. Playback will play using the rendered  preview file. Playback at full quality is certain to be in real time.
    yellow: This segment of the sequence does not have a  rendered preview file associated with it. Playback will play by  rendering each frame just before the CTI reaches it. Playback at full  quality will probably be in real time (but it might not be).
    red: This segment of the sequence does not have a  rendered preview file associated with it. Playback will play by  rendering each frame just before the CTI reaches it. Playback at full  quality will probably not be in real time (but it might be).
    none: This segment of the sequence does not have a  rendered preview file associated with it, but the codec of the source  media is simple enough that it can essentially be treated as its own  preview file. Playback will play directly from the original source media  file. Playback at full quality is certain to be in real time. This only  occurs for a few codecs (including DV and DVCPRO).
    Note the uses of the word probably above. The colors aren’t a  promise. They’re a guess based on some rather simple criteria. If you  have a fast computer, then a lot of things marked with red may play back  in real time; if you have a slow computer, then some things marked with  yellow may need to be rendered to preview files before the segment can  be played in real time.

    This is not the work of a virus, or any other kind of malware. What it sounds like is a very badly corrupt hard drive causing all manner of corruption in your various system components and applications. You probably need to erase your hard drive and reinstall the system from scratch, as ds store has said.
    If you actually had malware, Sophos would find it. If Sophos found nothing, there was almost certainly nothing to find. If something like Sophos ever should find malware, unless the malware has "OSX" or "MacOS" in the name, it probably isn't Mac malware and thus isn't something you need to worry about (other than not passing it on to other people).
    MacScan is junk. It serves no useful purpose. See:
    MacScan disappoints

  • Blu-ray build: no video (solid red, green, etc image)

    Hey everyone,
    If this problem has already been addressed, could someone please point me in the right direction? I searched and didn't find anything similar, but wasn't too sure what to search for.
    My problem: Everytime I build a blu-ray project in Encore, I am getting the same result; the video will play (according to the progress bar on the player), but the image is always a solid color, sometimes it's red, green, tan, black, apparently just random, but always the same color throughout the entire video.
    I have tried so many different things at this point, I'm at a loss for how to proceed further. I've tried this with at least three different projects, all of which were created in Premiere. I have attempted both the dynamic link from Premiere to Encore and exporting the video first and importing into Encore later. I have tried transcoding as .264 and MPEG2 (I am not very knowledgeable about the settings, so I use the defaults). I have tried building the project in Encore as a blu-ray folder and as an ISO. I have burned to discs and played just the digital files on my PC.
    The video always plays fine up until after it is exported from Encore (that is, it previews fine in Premiere, exported video from Premiere plays fine in players like VLC, and the video previews fine in Encore).And I have no trouble building DVDs in Encore with the same video, timeline, and all that jazz.
    The only thing I haven't done yet is gone to the trouble of trying to reinstall Encore, which will be my next step if noone here has any suggestions. I am running CS6 with all recent updates. I have been testing the blu-ray playback in PowerDVD and a PS3.
    Like I mentioned above, I'm not very proficient in video. If I left out important details, just let me know. Thanks in advance for any help!
    Matt

    When I play the m2ts file, it works fine in VLC and also in PowerDVD. That's interesting, but I'm not sure what that means?
    If the actual m2ts file from the Encore build does not show the problem, but what I assume is the same file on disk (or in iso) shows the problem, what could cause such a problem? (I don't know.) The more frequent oddity is a problem on burned disk and not on iso or folder, which points to the burner, burn speed, or media. But that does not appear to be the issue here.
    I can't find the example at the moment, but try creating a tiny bluray project and see if the problem occurs. If so, you can upload it for me to take a look.
    For example, one menu with one button, linked to a 30 second timeline, using a sample of your material that is causing the problem. If that shows the problem, I would also try a bars and tones sample to eliminat your actual video - although I assume your video is part of the equation.

  • Aironet 1100 RED-GREEN-RED lights on

    Hello,
    my Aironet 1100 has the red-green-red leds on, how can i replace the IOS, how can i access it, i'm having problems using Ethernet?
    thanks

    Just had the same thing happen. I hooked the AP up to a laptop via ethernet cable, held the Mode button while connecting the power to the AP, and used tftp to transfer the image back to the AP.

Maybe you are looking for