No response when inside application
After using the iPhone for most of the day, I experienced a problem where I could get into each application but once inside I could not get anything to highlight with the Touchscreen.
This seems wierd as the touchscreen seems to work perfectly to select the application, just that nothing is recognised when inside.
The phone was working perfectly up till this point.
I would go in and Uninstall everything I have installed recently until it corrects, however, as I cannot get any response when inside Uninstall I cannot do this.!!
I cannot even use the phone function as, when I enter the Phone application, I cannot get any response from the Contacts nor Keypad.
I need help desperately, I have looked through the forum but cannot find a fix for this.
"Before I send it in for a check up, has anybody any ideas."
Yes, I do. Reset it to factory defaults. Get a new memory card. Make sure you have a good fully charged battery. This can easily be a battery and/or charger problem and not a camera issue. You might as well do these simple steps as Canon Service will if you send it to them.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7
Similar Messages
-
I got one of those "Apple may periodically collect..." windows when an Application crashed on me, and I selected to report the crash.
I've not seen this window before and I hit return before I had a chance to read it. Now I realize that I had the checkbox checked that means I'll never see the window again. Is there anyway to go back and look at that again?
Thanks,
KeithIf you chose to automatically send diagnostic information, you can reset the option from the preferences of the Console application, in which case it will ask again the next time. Clicking the help icon (the question mark) in the preferences window will bring up more information.
-
No response when trying to export with fcpx
Just updated to Mavericks. Everything worked fine before then.
So I finished my project , go to export, and no response. When I try and export to vimeo or you tube I get this error -
"The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
Its not a camera import issue. I actually made another project with clips that I know to have exported, with no problem. And again, there is no response when I export project.
And I can't uninstall fcpx because I have clips saved to the program. And hard drive is dead.
Thank you for your help!CClips aren't inside the application.
What version are you using? older versions don't work with 10.9. -
Issue: Not getting response when the document is having special chars
Please help following issue: Not getting response when the document is having special chars(Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
Error message:
System.FormatException: Invalid length for a Base-64 char array. at
System.Convert.FromBase64String(String s) at
Summarize.Summarizer.AccumulateBroadcast(String filedata, String givenWords) in
c:\DocumentSummarizer\App_Code\Summarizer.cs:line 66
Code:
File 1:
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.URLConnection;
import java.util.Properties;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hwpf.*;
import org.apache.poi.hwpf.extractor.*;
import com.lowagie.text.Document;
import com.lowagie.text.pdf.PRTokeniser;
import com.lowagie.text.pdf.PdfReader;
public class DocumentSummarizerClient {
static Properties loadProperties() {
Properties prop = new Properties();
try {
prop.load(DocumentSummarizerClient.class.getClassLoader().getResourceAsStream("vep.properties"));
} catch (Exception ioe) {
ioe.printStackTrace();
return prop;
public String getSummary(String fileName,String noOfWordsOrPercentage ){
String summaryInputData ="";
String summarizedData="";
String summarizerURL = loadProperties().getProperty("Summarizer.serviceURL");
try {
String fileExtension=fileName.substring(fileName.lastIndexOf(".")+1, fileName.length());
if (fileExtension.equalsIgnoreCase("doc")|| fileExtension.equalsIgnoreCase("txt")|| fileExtension.equalsIgnoreCase("pdf")) {
if (fileExtension.equalsIgnoreCase("txt")) {
BufferedReader bufferedReader = new BufferedReader(
new FileReader(fileName));
String line = null;
while ((line = bufferedReader.readLine()) != null) {
summaryInputData += line;
if(fileExtension.equalsIgnoreCase("doc")){
POIFSFileSystem fs = null;
fs = new POIFSFileSystem(new FileInputStream(fileName));
HWPFDocument doc = new HWPFDocument(fs);
WordExtractor we = new WordExtractor(doc);
String[] paragraphs = we.getParagraphText();
for( int i=0; i<paragraphs .length; i++ ) {
paragraphs[i] = paragraphs.replaceAll("\\cM?\r?\n","");
summaryInputData+= paragraphs[i];
if(fileExtension.equalsIgnoreCase("pdf")){
Document document = new Document();
document.open();
PdfReader reader = new PdfReader(fileName);
int pageCount =reader.getNumberOfPages();
for(int i=1;i<=pageCount;i++){
byte[] bytes = reader.getPageContent(i);
PRTokeniser tokenizer = new PRTokeniser(bytes);
StringBuffer buffer = new StringBuffer();
while (tokenizer.nextToken()) {
if (tokenizer.getTokenType() == PRTokeniser.TK_STRING) {
buffer.append(tokenizer.getStringValue());
summaryInputData += buffer.toString();
else{
System.out.println("This is Invalid document. Presntly we support only text,word and PDF documents ");
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
// System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
else{
System.out.println("Data given cannot be summarized further");
summarizedData="";
} catch (FileNotFoundException e) {
return("The File is not found \n\n"+e.toString());
} catch (IOException e) {
return("The File is already in use \n\n"+e.toString());
} catch (Exception e) {
return(e.toString());
return summarizedData;
public static String postRequest(String parameters,String webServiceURL) throws Exception{
Properties systemSettings = System.getProperties();
systemSettings.put("http.proxyHost", loadProperties().getProperty("proxyHost"));
systemSettings.put("http.proxyPort", loadProperties().getProperty("proxyPort"));
System.setProperties(systemSettings);
String responseXML = "";
try {
URL url = new URL(webServiceURL);
URLConnection connection = url.openConnection();
HttpURLConnection httpConn = (HttpURLConnection) connection;
byte[] requestXML = parameters.getBytes();
httpConn.setRequestProperty("Content-Length", String
.valueOf(requestXML.length));
httpConn.setRequestProperty("Content-Type",
"application/x-www-form-urlencoded");
httpConn.setRequestMethod("POST");
httpConn.setDoOutput(true);
httpConn.setDoInput(true);
OutputStream out = httpConn.getOutputStream();
out.write(requestXML, 0, requestXML.length);
out.close();
InputStreamReader isr = new InputStreamReader(httpConn
.getInputStream());
BufferedReader br = new BufferedReader(isr);
String temp;
String tempResponse = "";
while ((temp = br.readLine()) != null)
tempResponse = tempResponse + temp;
responseXML = tempResponse;
br.close();
isr.close();
} catch (java.net.MalformedURLException e) {
System.out
.println("Error in postRequest(): Secure Service Required");
} catch (Exception e) {
System.out.println("Error in postRequest(): " + e.getMessage());
return responseXML;
public String replaceVal(String value) {
if (value == null) {
value = "";
value = value.replace("<", "<");
value = value.replace(">", ">");
value = value.replace("&", "&");
return value;
public static void main(String[] args) {
DocumentSummarizerClient testdoc=new DocumentSummarizerClient();
System.out.println("hello");
testdoc.getSummary("C:\\working_folder\\vep\\UnitTestCases\\VEP1.0\\DocumentSummarizerTestData\\TestErrorFour.doc","100%");
Note: Use any doc with special char(ex: &, $, <, >,.....) TestErrorFour.doc
File 2:
---------public class Base64Utils {
private static byte[] mBase64EncMap, mBase64DecMap;
* Class initializer. Initializes the Base64 alphabet (specified in RFC-2045).
static {
byte[] base64Map = {
(byte)'A', (byte)'B', (byte)'C', (byte)'D', (byte)'E', (byte)'F',
(byte)'G', (byte)'H', (byte)'I', (byte)'J', (byte)'K', (byte)'L',
(byte)'M', (byte)'N', (byte)'O', (byte)'P', (byte)'Q', (byte)'R',
(byte)'S', (byte)'T', (byte)'U', (byte)'V', (byte)'W', (byte)'X',
(byte)'Y', (byte)'Z',
(byte)'a', (byte)'b', (byte)'c', (byte)'d', (byte)'e', (byte)'f',
(byte)'g', (byte)'h', (byte)'i', (byte)'j', (byte)'k', (byte)'l',
(byte)'m', (byte)'n', (byte)'o', (byte)'p', (byte)'q', (byte)'r',
(byte)'s', (byte)'t', (byte)'u', (byte)'v', (byte)'w', (byte)'x',
(byte)'y', (byte)'z',
(byte)'0', (byte)'1', (byte)'2', (byte)'3', (byte)'4', (byte)'5',
(byte)'6', (byte)'7', (byte)'8', (byte)'9', (byte)'+', (byte)'/'};
mBase64EncMap = base64Map;
mBase64DecMap = new byte[128];
for (int i=0; i<mBase64EncMap.length; i++)
mBase64DecMap[mBase64EncMap[i]] = (byte) i;
* This class isn't meant to be instantiated.
private Base64Utils() {
* Encodes the given byte[] using the Base64-encoding,
* as specified in RFC-2045 (Section 6.8).
* @param aData the data to be encoded
* @return the Base64-encoded <var>aData</var>
* @exception IllegalArgumentException if NULL or empty array is passed
public static String base64Encode(byte[] aData) {
if ((aData == null) || (aData.length == 0))
throw new IllegalArgumentException("Can not encode NULL or empty byte array.");
byte encodedBuf[] = new byte[((aData.length+2)/3)*4];
// 3-byte to 4-byte conversion
int srcIndex, destIndex;
for (srcIndex=0, destIndex=0; srcIndex < aData.length-2; srcIndex += 3) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+2] >>> 6) & 003 |
(aData[srcIndex+1] << 2) & 077];
encodedBuf[destIndex++] = mBase64EncMap[aData[srcIndex+2] & 077];
// Convert the last 1 or 2 bytes
if (srcIndex < aData.length) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] >>> 2) & 077];
if (srcIndex < aData.length-1) {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] >>> 4) & 017 |
(aData[srcIndex] << 4) & 077];
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex+1] << 2) & 077];
else {
encodedBuf[destIndex++] = mBase64EncMap[(aData[srcIndex] << 4) & 077];
// Add padding to the end of encoded data
while (destIndex < encodedBuf.length) {
encodedBuf[destIndex] = (byte) '=';
destIndex++;
String result = new String(encodedBuf);
return result;
* Decodes the given Base64-encoded data,
* as specified in RFC-2045 (Section 6.8).
* @param aData the Base64-encoded aData.
* @return the decoded <var>aData</var>.
* @exception IllegalArgumentException if NULL or empty data is passed
public static byte[] base64Decode(String aData) {
if ((aData == null) || (aData.length() == 0))
throw new IllegalArgumentException("Can not decode NULL or empty string.");
byte[] data = aData.getBytes();
// Skip padding from the end of encoded data
int tail = data.length;
while (data[tail-1] == '=')
tail--;
byte decodedBuf[] = new byte[tail - data.length/4];
// ASCII-printable to 0-63 conversion
for (int i = 0; i < data.length; i++)
data[i] = mBase64DecMap[data[i]];
// 4-byte to 3-byte conversion
int srcIndex, destIndex;
for (srcIndex = 0, destIndex=0; destIndex < decodedBuf.length-2;
srcIndex += 4, destIndex += 3) {
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
decodedBuf[destIndex+1] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
decodedBuf[destIndex+2] = (byte) ( ((data[srcIndex+2] << 6) & 255) |
(data[srcIndex+3] & 077) );
// Handle last 1 or 2 bytes
if (destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex] << 2) & 255) |
((data[srcIndex+1] >>> 4) & 003) );
if (++destIndex < decodedBuf.length)
decodedBuf[destIndex] = (byte) ( ((data[srcIndex+1] << 4) & 255) |
((data[srcIndex+2] >>> 2) & 017) );
return decodedBuf;
issue 2: Exception when passing 2MB .txt file
Steps to reproduce:
Call getSummary() with 2MB .txt file
Actual:
The following exception has occured:
1. Error in postRequest(): Unexpected end of file from server
java.lang.NullPointerException
Please provide your precious feedback/suggestions.
Thanks in advance…..
Edited by: EJP on 15/03/2011 16:52: added code tags. Please use them. Code is unreadable otherwise.Thanks for your response….
This is enhancement project and some one develops long back.
Regarding point (b) You should be using the java.net.URLEncoder to encode URL parameters, not a base64 encoder.
DocumentSummarizerClient.java I am using base64
Ex:
// String encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String encoded=Base64Utils.base64Encode(summaryInputData.getBytes());
// encoded =new String (summaryInputData.getBytes("ISO-8859-1"),"UTF-8");
String parameters= "base64String="+encoded+"&noOfWordsOrPercentage="+noOfWordsOrPercentage;
summarizedData= postRequest(parameters,summarizerURL);
String slength= "<string xmlns=\"http://tempuri.org/\">";
if(summarizedData.contains("</string>")){
summarizedData= summarizedData.substring(summarizedData.indexOf(slength)+slength.length(),summarizedData.indexOf("</string>"));
summarizedData = replaceVal(summarizedData);
//System.out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?><![CDATA["+summarizedData+"]]>");
System.out.println("Summarized data "+summarizedData);
if(summarizedData.contains("Please enter the percentage")){
summarizedData="Data given cannot be summarized further";
Above specific please I need to modify to resolve above issue.
Could you please suggest me what changes I need to do.
Waiting for positive response. -
I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.” What do I do? I have opened this up in the past without a problem.
Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
When the application is internet bank "Belagroprombank"?
when the application is internet bank "Belagroprombank"?
Thank you so much for your response.
The WLS's log show this error:
]] Root cause of ServletException.
oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:253)
at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:168)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:546)
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:327)
at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:104)
Truncated. see log file for complete stacktrace
java.sql.SQLException: ORA-01005: null password given; logon denied
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:116)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:177)
I don't know what I should do to correct this error.
Thank's. -
Slow response when entering data to an empty cell?
Hey there...
I have this issue that when I start entering data into an empty cell or owerwriting one, the response is slow; when I press a button on the keyboard it takes roughly 1 second before anything visual happens in the cell, but when the data "makes it way through" the response is normal when hitting the keyboard.
Is anyone else experince a slow response when entering data to an empty cell in Number 09 or when overwriting one?/ Anyone familar with a similar issue, and is there anybody who knows how to fix this, or is it just normal for Numbers 09 to be a bit sluggish in the beginning when entering data?
I've recently swithced from Excel 2007 to Numbers 09, so sorry if the terminology is incorrect.Question asked and answered several times.
Numbers was not coded by brains but by feet so, it behave sadly when the AutoSave Lion feature apply.
I posted a script getting rid of that.
Start from a template or duplicate the existing document just after opening it then close the original and work on the duplicate.
As it was never saved, AutoSave doesn't apply to it;
From time to time (say at least every ten minutes) call my script.
It wil duplicate the doc in progress and save it with a date_time stamped name.
this way, you will continue to enter datas in a never saved document.
Search for the string Auto_Save in the existing threads.
It's late and I'm too tired to search for you.
Yvan KOENIG (VALLAURIS, France) lundi 26 décembre 2011 12:03:51
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I am a teacher and have my own iPad with a data plan. We also have a router in teh classroom for wifi, and it has a very strong signal. On Safari, the ipads can connect to the internet. But when in applications such as Keynote and HTML Egg, I try to e-mail presentat. or post website to web, it doesnt work. I tried re-setting the proxies and the router, no luck. Please Help! I am a teacher and want my students to be able to post their websites on to the web, and e-mail themselves and their parents their Keynote Presentations.
Try this. Turn your iPad Off. Then disconnect the power going to the router for 30 seconds or longer. Then replug the power to the router (allow it to initialize) and turn On the iPad. Hopefully everything will connect. If not, see below.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Issue with receiving response from web application
Hi,
I have configured B2B with business protocol as 'Custom document document over Internet', document exchange protocol as AS2-1.1 and transport protocol HTTPS1.1 to invoke a web application deployed in Oracle Application server. B2B is able to invoke the web application with HTTPS request which contains an xml.
I have set the acknowledgment mode as 'Sync' and 'Is acknowledgement handled by B2B' as true. But while receiving the response from web application which is an xml, B2B is showing the error as
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3244)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1665)
at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2382)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1825)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:974)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
I have added headers as present in the wire message of the request. In B2B, it is showing the wire message for response as follows.
TO_PARTY=XXX
AS2-To=XXX
DOCTYPE_NAME=TestAS2DT
DOCTYPE_REVISION=1.0
Date=Tue, 03 Nov 2009 06:09:22 GMT
AS2-Version=1.1
AS2-From=YYY
Content-Transfer-Encoding=binary
[email protected]
ACTION_NAME=TestAS2_BA
Content-Type=application/xml
Server=Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server
MIME-version=1.0
User-Agent=AS2 Server
FROM_PARTY=YYY
Content-Disposition=attachment; filename=1.0
Connection=Keep-Alive
From=YYY
Keep-Alive=timeout=15, max=100
<?xml version="1.0" encoding="UTF-8"?>
<Books>
<Book>
<BookTitle>Ajax Hacks</BookTitle>
<Author>Bruce W. Perry</Author>
<PubDate>March 2006</PubDate>
</Book>
</Books>
I am able to see the xml sent as response from web application in Payload as follows.
<?xml version="1.0" encoding="UTF-8"?>
<Books>
<Book>
<BookTitle>Ajax Hacks</BookTitle>
<Author>Bruce W. Perry</Author>
<PubDate>March 2006</PubDate>
</Book>
</Books>
I am able to see the HTTP response in b2b_dc_transport.log. In transport log it is not showing any error. Please help me to fix this issue.Hi,
Request and Response should be part of same agreement. I hope you are not confused between Acknowledgement and Response. Acknowledgement can be received in the same session (sync mode) but Response will always come in a different session and will be treated as a different document. If, for request, party A is initiator and B is responder then for response party B will be initiator and party A will be responder (as Requset and Response are two docs in case of Custom Document)
For configuring X-Path, please refer section 8.3.11 Configuring the XPath Expression for a Custom XML Document at below link -
http://download.oracle.com/docs/cd/B14099_19/integrate.1012/b19370/busact_coll.htm#sthref784
Please let us know whether you are trying to receive a response or Ack?
Regards,
Anuj -
I am having trouble in the Itunes store I am tryinmg to search for an album or the artist I type in the search and click but nothing happens only raely. On my Ipod touch I cna get an instant response when I type in the search but because the keyboard is small and I am sight impaired I like to do my purchases on my commputer but only very raely does the search section responds what can I do to rectify this?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Random users getting very slow response when opening messages/attachments or sending email
I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
They see the spinning wheel and sit there until it decides to open or send. If the message is opened and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?Hi,
How about OWA?
If OWA works well, it seems an issue on the Outlook client side.
Please try to run Outlook under safe mode and re-create profile for testing.
Any related error/warning/information message left in App Log?
Also consider the network Bandwidth.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
Sincerely,
Al
Version 26.0 Firefox, Windows XP, sp/3Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Hi All,
Data loading of 2LIS_02_SCL and 2LIS_02_ITM is getting failed by throwing an error
'The argument ' 0.000 V' cannot be interpreted as a number' when assigning
application structure, line 805, contents "20140611NB
F000000004500098898102E202USD 000..."
Here Data is not even loading to PSA so I cannot edit the data in PSA.The process chain is getting failed at Load step it self.
I have even checked the ECC for the particular PO mentioned In the error message but i could not found any issue in ECCHi There,
Does anyone know the root cause of it? We are facing the same issue.
Please keep in mind, IT`s NOT PC FILE DATASOURCE. It`s standard 2LIS_02_ITM extractor.
Thanks in advance. -
Can a subVI tell when the application it is part of has been stopped and restarted?
Can a subVI tell when the application it is part of has been stopped and restarted?
It is easy enough for a subVI to tell when it has been run for the first time after having been loaded into memory. But is there a way for a subVI to tell when the application it is part of has been stopped and restarted? Is there some property or application-invocation-specific refnum that when queried multiple times during the same run of the application would return the same value yet when queried during different runs of the application would return different values?
I don�t want to depend on anything that happens when a run is exited.
I don�t want to require code to be included in the main V
I to accomplish the solution.
(Otherwise I could, in the main VI create an un-named semaphore tied to a global; the subVI could then check the global to see if the value changed, which it would between runs of the application.)
Any ideas?Have you tried the First Call? function? It's on the Advanced>Synchronization palette.
Maybe you are looking for
-
I am trying to open a MPEG video clip using Quicktime and it wont let me, keeps saying a codec is required. So I click on tell me more, have downloaded Quicktime 7 on numerous occasions thinking this was the problem, and it still wont let me open in
-
BDC Session processing in SM35
Hi, Please let me if a session in SM35 has lot of data to process, will it be timed out?? Thanks & Regards, Soumya.
-
View temporary data in Web layout during file upload in Integrated Planning
Hi Experts, When using File Upload funcationality, in Integrated Planning, I have a requirment, How user can view the data in the web layout? After data display user can make changes in the data and on click of Save the updated data is saved in cube.
-
What is the best software to run windows office products
I am considering moving to a macbook pro from a pc. What is the best software to use to access microsoft office apps?
-
Acrobat pro X1 upgrade to Adobe DC came as windows instead of Mac
I have Acrobat pro X1 and when it proposed upgrading to Adobe DC I did that and dowloaded but, even though my current version is for Mac it has downloaded the Windows version which I do not want. Now I find there is none to contact to resolve this an