No show Mail From on sended mail ??

Hi
     I need send mail and show in "FROM" field a Name or other String, not from addresse (on addressee)
     e.g.
          FROM: [email protected]
          TO: [email protected]
     I don't like show "[email protected]", want shot "Javier Padron".
     I know that java mail, to create mail, need indicate logic FROM addresse, but, don't like that it are showed, want show other text.
     Any idea ?? thx !

Ok, already solve the problem:
before, to indecate Froma addresse:
message.setFrom(new InternetAddress("master@localhost"));now, use other constructor of InternetAddress:
message.setFrom(new InternetAddress("master@localhost", "My Name"));thank :P

Similar Messages

  • In mail how do I stop messages from the same sender from showing up when I select the most recent message from a sender?

    on my iMac, when I view messages there is a grey number at the top of the message. This number denotes the amount of  messages from that sender and when I view the most recent message in my mailbox (from that sender) all of the older messages load with it and this takes a while for the message to become moarked as "read." I know that I can turn this off because I have mountain lion on my air and i do not have this issue. how can i turn it off?
    thanks

    thanks so much, that fixed it! before I posted this quiestions I kept looking in the mail preferences but I dind't think to look on the View menu.

  • In Mail can I change my "To" field to From or sender

    In Mail my inbox shows 3 fields "To, Subject, Date Recieved" Can I change the "to" field to from or sender. I know who the mail is to, it's always to me after all it's my mail I'm checking. I would like to know the sender so I can better decide which mail to open and read. Sometimes I'm looking for a response from a paticular person.

    Hi Ubettergetit: Actually it is quite easy to get rid of that little annoyance. With mail open, Right (Control) Click on one one of the headings in Mail. (To, From, Subject....). This will bring up a menu that allows you to select which headings you would like to see, change it as required.
    Enjoy
    Stedman

  • Mail from no sender with no topic and no message

    For the past month or so I have been getting messages from no sender, with no subject line and no content.
    Does anyone know what this is and how I can stop it?
    Thanks,
    Ivan

    Hi Ivan,
    It's some problem outside of your control most likely, I've seen a few myself as well as other reports of this. I get a few mails not even addressed to me.
    You can make a Rule that if From does not contain @, them move to trash.
    Still, if you think it may be an issue on your end, this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    One other possibility... did you show long Headers, is there any info there?

  • My house address shows up when I send an email to my daughters' G-mail account.

    My house address shows up when I send an email to my daughters' G-mail account.  How do I stop Mail from sending this information?  I don't want this going out to every person I send an email message to - I'll add it when I want to.
    Note:  It doesn't show up when I send an email to myself.  My daughter said that it shows up on the right side of screen in her G-mail account...apparently an area where she is used to seeing advertisements?! 

    This is Redvax1 again....I found the answer. 
    In the Apple Preferences under "Security" - There is a check box for "Location Services".  I had it turned on.
    It turns out that G-Mail will pick this up and show your current address in a sidebar of the recipients email. 
    I turned it off, and it appears to have solved the mystery. 
    BEWARE TO THOSE OF YOU WHO CHERISH THEIR PRIVACY OR ARE HIDING FOR WHATEVER REASON -  YOU MAY GIVE YOURSELF AWAY IF YOU SEND AN EMAIL WITH "LOCATION SERVICES" TURNED ON!

  • Iphone mail app not receiving e-mail from 1 sender

    The Mail app on my iPhone 6/iOS 8.3 is not receiving e-mail from one sender sent to my Outlook e-mail account. This sender's e-mail address is "[email protected]". It is a notification of digital magazines available from Zinio. I know the mail app is not receiving the e-mail because Outlook 2013 on my desktop and Outlook.com do receive these e-mails. How can I get the mail app on my iPhone to receive these e-mails from this address?

    Initially it sounds like something with your backup data caused the issue with your new device but if you restored your device again without using the backup and the issue still exists it wouldn't appear to be the issue at all. Since the problem seems to only be with one person are you sure it's not an issue on their end and with their network that is stopping you from receiving the messages? Have you tried *228 option 2 to see if that helps?

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • How to send mails in HTML format from the send mail step of workflow?

    Hi,
    I have a requirement where I need to send mails in the html format from the send mail step of the workflows.
    But what I found out that the html tags are not renderd and as such the output is in plain text.
    I know that there is an alternative of using an activity step and use my own custom code from within there,But due to certain business constraints, I need to use the send mail step only.
    My SCOT settings are all right.
    Please let me know how it can be done.
    Thanks,
    Samrat.

    Samrat,
    It can't be done, you have to use your own activity step.
    What are these constraints that refrain you from doing that?
    Rgds,
    Patrick

  • Junk Mail folder refusing to show messages from a particular account

    So, I have a weird problem with Leopard Mail (3.2) - when I click on the junk mail folder, 99% of the time it won't show messages from my Yahoo POP account. The only way I can get messages from this account to show is by expanding the junk mail folder, clicking on a different sub-account, then clicking on my Yahoo account. This will show the messages in its junk folder, and if I click on the combined junk folder they will show up inside it. This will work until I click away from junk - say, to my inbox - at which point the procedure will need to be repeated if I wish to see my Yahoo junk mail.
    I've only noticed it very recently, but I'm not sure how long it's been going on. Unbelievably annoying. I deleted the junk folder, no luck. I toggled the account off/on - this seemed to work for a day, but the behaviour's back and I can't make this work again. I rebuilt the mailbox... Even deleted and added the account again, but it still did the same thing.
    Has anyone else experienced this? Is it just a bug in Leopard Mail? Something specifically with POP accounts, perhaps? (My 5 IMAP accounts seem fine). If anyone has any further suggestions I'd be really, really grateful.

    Ok, so, something in way of an update: Normal behaviour appears to be restored after Mail detects a piece of junk mail and puts it in the junk folder for this account (manual marking of junk doesn't do the trick). Then it works ok until I quit Mail.

  • How to send a mail in html format from a send mail workflow node ?

    Dear all,
    Do you know if it is possible to send an e-mail in HTML format (instead of RAW) from a "send mail" node in a workflow ?  ... if "yes", please, let me know.
    (I need to do that because I want to use the "href" tag to insert an hyperlink inside the e-mail)
    - I haven't found any parameter to specify the format of the e-mail.
    - Inside SCOT I tried to change the parameters for the SMTP node... without success.
    - I don't want to use a task calling the FM SO_OBJECT_SEND.
    Nicolas

    Hi Nicolas!
    Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
    If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
    SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
    Hope this helps!
    Regards
    Geir

  • Really weird problem -- won't download mail from one sender

    I'm having a really weird problem. Apple Mail won't retrieve mail from my Gmail account via POP3 from one sender only. All other mail is downloaded normally, except from a particular sender. What could be causing this? Thanks.

    I am trying to remember and research something about the Junk filter and Gmail accounts. Have you checked in your Junk mailbox, if Junk in enabled and there is a separate Junk mailbox?
    If you click on my name to the left, and look in the bio line of the resulting Profile, you will find an email address you can reach me with. If you email me at that address, I will send you a Gmail address that your sender can test sending a message to me at my Gmail account.
    Ernie

  • Define Alert for mail from specific sender on E5-0...

    Hi All
    I'm supposed to receive pager on my E5-00 overnight so I wanted to define a alert (ringtone) when a mail from a specific user is received is that possible?
    Regards 

    You would have to set up a server-side filter which moves everything which isn't from this sender to another folder which you'd have to look at in the morning, enable it every night and disable it every morning.

  • Show mail from all folders

    Sorry if this has been asked and answered.
    Is there a way to show email from all my differnt folders in one main folder.  I use exchange and have rules on my computer that based on who its from it goes to a certain folder.   When I view my email on iphone I have to go to each folder individually.  Anyway to see all unread mail in one folder?

    Seriously?  Is there a third party app that can do this?
    Like the original poster I'm used to Touchdown on my Android phone and I can sync whatever folder I want and then view them individually or all in a "unified inbox" if you will.
    Apple needs to step up their game on this if they expect better enterprise adoption.  What a pain to have to check each folder...also I've noticed I only get a notification badge when it's an email direct to my inbox!! Come on!!  So I don't even know I have an email then I have to navigate through the folders themselves...arrrgh
    -Ian

  • Yahoo app on iPhone seems to be sending spam to all my yahoo contacts. I know this because my "Sent" folder on my app shows i sent it out at 5 AM this morning and I was not using my phone at that time. Also the signature show signature from iPhone

    Yahoo app on iPhone seems to be sending spam to all my yahoo contacts. I know this because my "Sent" folder on my app shows i sent it out at 5 AM this morning and I was not using my phone at that time.
    Also the signature show signature from iPhone
    "Sent from Yahoo! Mail for iPhone"
    Aside from deleting application does anything else have to be done?

    Backup your iPhone. Tap Settings > iCloud > Storage & Backup > > Back Up Now
    iCloud: Backup and restore overview

  • ICloud Control panel shows "Mail with Outlook" only

    Hi,
    my iCloud Control panel (2.1.1) shows "Mail with Outlook" only, since i removed an ticked the check box twice.
    Should be "Mail, Contacts, Calendars, and Tasks with Outlook".
    So i did receive Mails from my iCloud account, but no syncing for Contacts, Calendars, and Tasks.
    Does anybody know how to restore the full functionality ?
    Thank you
      Wolfgang

    I have the same setup as sceloglaux (Win 7 64 bit Home, iPhone 3GS, Outlook 2010).
    I tried a reboot, uninstall, reboot again, disable and close anything I can, then reinstall. Still the same problem.
    Athough I'm not sure if I got this message before:
    Outlook Setup Error
    Your setup couldn't be started because of an unexpected error.
    Clicking the report button brings up my profile dialog box, then I choose my profile and it just goes back to the error dialog. Try again does the same thing.
    sceloglaux - it sounds like you got it working. Care to enlighten us on what steps you took?
    Do I need to have an me.com e-mail account set up first? I don't want to sync e-mail, just calendar and contacts. I tried setting up e-mail in case that's the missing link, but I'm having trouble with that as well (separate thread, probably server issues).
    Thanks.

Maybe you are looking for

  • Can't open .DNG files in Preview and others

    I am using Adobe DNG converter OR Lightroom to convert .RW2 from a Panasonic Lumix 3 to .DNG This works: 1. Working with files in LR 2. Use PanoMaker to create panoramas 3. Create HDR with Photomagix This does not work 4. Open files with MAC OS X 10.

  • Witholding tax rates

    Dear All, How do we change the applicable rate of witholding tax to a existing vendor if there is a change in the tax rates at Macro level. Kindly give solution. Thanks

  • Wbs element number changing in easy cost planning

    Hi ps guies I m facing a strange problem in ps. I create a structure in project bulider.after that when switch to easy cost palnning ,the top wbs number changes to another number which i dont know from where it is coming. This happens only with top w

  • 802.1x EAP type not configured

    Hi, a simple 802.1x test with XP client sp2, 3560 with IOS 12.2(35)SE5 and ACS 4.1(1) build 23. EAP MD5 selected on the client and enabled on the ACS but I receive in ACS an authentication failure message, with Authen-Failure-Code "EAP type not confi

  • Settings/Show menus not appearing when shared computer selected.

    My daugher and have PCs and share our iTune libraries with each other.  I'm not quite sure when this happened, but there are no longer any menus available when we select each other's computer under SHARED.  We can't select "Items not in my library" t