No sound during gameplay NFS Rivals

I have a HP Envy 15 J049TX.
While playing NFS Rivals i do not get any in game sounds. The peculiar thing is I get sound for every other application I have on my system. I tried unistalling the game and installing it again, updated my directx and even unistalled and reinstalled my IDT HD Audio drivers but the problem remains unsolved . Even the windows sound mixer volumes are full
Kindly help
This question was solved.
View Solution.

Solution 
I just uninstalled all IDT drivers from device manager restarted my laptop and sound is back for NFS rivals...
Once am done playing i can reinstall latest IDT drivers from HP support assistant... 
Hope it helps 

Similar Messages

  • NFS Rivals sound problem in HP Envy 15-j111tx

    I installed NFS Rivals on my Envy 15-j111tx and to my suprise there was no sound. I tried reinstalling the game also but it didn't work. All the other sound elements in the laptop are still working. Please Help!!!!  

    Hello @RickyTarjaes,
    I see that you're having an issue with the sound on your notebook, when using multiple appliactions that produce sound. I will try to assist you with this.
    The behavor that you're expirencing is normal, to the extent of settings. Certain applications/programs that produce sound can be set to "rise above" the other application/programs. Depending on current volume, this would lower the sound in another program. You generaly see this in voice chat programs, where they will reduce the volume of an other application.
    In Windows this can be set as well. Below tells you how to turn it off in Windows.
    In the Start menu, search in the Settings category (Win+W)for "Change Sound Card Settings".
    In the Communications tab, change "When Windows detects communications activity" to Do nothing.
    As for application specifc, you should be able to find instrustions throught their support. I would recommend starting with this.
    As for the touchpad, this can be disabled two ways.
    1. Double tap the upper left hand corner of the touchpad. This acts like an "on/off" switch.
    2. Disableing the touchpad driver from Device Manager.  To do this go into device manager, look for "mice and other pointing devices", click the "+" to expand. You should see the driver listed here, right click on that and choose to "disable". This way you'll have the driver for later, but the touchpad should no longer be active.
    I hope this is able to help you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Macbook Pro Get's Hot During GamePlay + Video Watching

    I'm new to mac's, so sorry if this may sound new to anyone. I recently purchased a new MBP 2011 edition, 13in, 2.7ghz with 8gb of ram.
    I downloaded Steam and the game Counter Strike, I noticed that the computer started to get very hot after a few minutes of playing. A friend told me to download the iStat Pro widget so i could see what the temperature of the computer was. The CPU gets up to around 200F, that's the highest temp that i've seen it get to. During gameplay, there is no lag, it's smooth as butter, but the CPU temp hovers around 196F. This is while it's on a cooling pad (with a fan) an propped up a few inches off the table.
    I've talked to a Genius at the GeniusBar in the Apple store and he said that it was sort of normal and that MBP's usually run hot, I also read some articles about the new i7 Processor witih folks having similar issues. My only worry is that I'm ruining my brand new MBP and the processors inside. As relating to the title, when watching Vimeo and having a few programs open, the comp is running at about 185F.
    Are others having a similar problem to this? If so how are you dealing with it and is it normal? Will these high temps harm the life of the processor? I have to use this thing all through college (starting in a few months) and I would just like to make sure that I'm not doing anything to harm it.
    Thanks for any help!

    Hi NyJeff,
    Those temperatures sound very normal for the i7 architecture in the littler 13" package. Keep in mind, that there's only one fan in that unit, not two fans like on the 15" & 17" units. Having the cooling pad will definitely help when gaming. The heat sinks and fan are designed to protect the hardware, in addition you'd be amazed how long the hardware will last even when constantly exposed to those sorts of temperatures.

  • Change in music playback level during gameplay

    Hi,
    I'm not sure if this is a bug or a feature.. when i'm playing my own music during gameplay and some effects happen in the game the music level goes to bottom and the sounds overwhelm the music. Is there a workaround to this... its rather annoying when you're listening music and when something happens in game and suddenly the music practically disappears... im using x-fi platinum. thanks

    Do you have SVM turned on? If yes, turn that off.
    If not:
    In Windows Vista and up, the OS' sound system lowers the overall volume if the mixed sound would be loud enough to cause distortion. Try lowering the music player's and the game's volume and instead crank up the master volume.

  • Random Reboot During Gameplay

    My comp randomly reboots during gameplay.  I haven't figured out y and was hoping someone might have some helpful information.
    System Specs:
    AMD Athlon XP 2600+
    512 MB Samsung DDR 3200
    DVD ROM
    CD Burner
    GeforceFX 5600
    Sound Blaster Audigy LS
    Klipsch 5.1 Pro Media Ultra
    Nforce 2 MSI K7N2G-L MOBO
    onboard lan card
    XP Pro SP1
    All drivers have been updated to the latest versions, and i have run memtest and everything has passed, my PSU is 400W and everything looks to be in order.  Only problem is my comp reboots randomly during gameplay.  If anyone has any idea how to fix this problem i would appreciate it.

    If you cant find a reference to a specific driver, I would at least try to repair the current installation. I dont see where you would have anything to lose, as you are ready to reformat.
    Did you ever run the driver cleaner program?
    Here's the steps to automatically repair the current version:
    Disable any antivirus program and BIOS-level antivirus protection. For help, refer to the relevant software manual or online help.
    Make sure that the CD-ROM or DVD-ROM drive is the first priority startup device. Refer to your computer documentation for information about how to do this.
    Insert the Windows XP CD into the CD-ROM or DVD-ROM drive, and then restart your computer.
    When the instruction to "Press any key to boot from CD" appears, press a key to let your computer start from the Windows XP CD.
    When the computer starts from the CD, the system checks your hardware and then prompts you to select one of the following options:
    To set up Windows XP now, press ENTER.
    To repair a Windows XP installation using Recovery Console, press R.
    To quit Setup without installing Windows XP, press F3.
    Press ENTER.
    Press F8 to accept the Licensing Agreement.
    A box lists your current Windows XP installation, and then the system prompts you to select one of the following options:
    To repair the selected Windows XP installation, press R.
    To continue installing a fresh copy of Windows XP without repairing, press ESC.
    Press R to start the automatic repair process. After repairing Windows XP, you may need to reactivate Windows XP, if you changed some hardware.

  • Docked iPod only outputs sound during video to TV

    I have a 5G iPod in an Apple dock, connected to my TV using a Monster audio cable and an S-Video cable. For some reason, it only outputs sound during videos or a photo slide show - not at all for music only playback. I'm baffled! Any idea why? It's a Panasonic plasma, and I've tried three different inputs. None work for music, but video is fine.

    The iPhone 4, unlike iPod, doesn't ask you to set for PAL or NTSC.  In fact, in the SETTINGS/Video menu it only asks if you want to "Start Playing From Beginning", "Closed Captioning" and "Home Sharing".  I was surprised it had no settings like the iPod at all.

  • No sound during import from camcorder

    When I am importing video from a DV tape in a camcorder I don't hear any sound. After the clip is captured, you can hear the sound during playback. Is there a setting that allows you to hear the sound during import? I have tried importing HDV format from a camcorder and regular DV from a tape deck with the same results.

    iMovie does not play sound on import. This makes sense if you consider that most current camcorders do not import in real time. They are faster or slower than real time depending on the speed of the Mac.
    See if your camera has a speaker. You can listen from the camcorder.

  • TS5150 i'm having trouble with the sound during playback on my apple tv

    theres no sound during playback on my apple tv

    Welcome to the Apple Community mdez3799
    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • Freeze During Gameplay

    I was playing a the name the song game on my ipod mini before class today when my ipod mini froze during gameplay. The backlight is still on on the ipod mini, and it is still frozen from where i left it. The ipod mini is currently still on as I type, should I just let the battery drain? I tried connecting it to the computer, but nothing happened.

    Hi Craig-
    When your iPod freezes, you can reset it to get it back to normal: hold down the Menu and Center buttons until you see the Apple logo.

  • No sound during calls in iphone4

    hi friends ,  recently i hv updated my iphone 4 to ios 7 , it was working perfectly , but after 2 days itz fell down ... after that no sound during calls(both mic n speaker) , but itz working on skype n viber .idk watz d prob , can any one help me out

     Hi, I do have the same problem. Just bought the phone. Updated right after bying to Androit 4.1.2 and Build nr 9.1.A.1.140.Calls with headset or loudspeaker works. But if I switch it too normal calling I´couldn´t hear a thing. I turned the phone on and off: no change. I even did a reset: no change.I really didn´t wanted 2 buy an iphone because I thought that the androit phones got better over the years. Somehow I really disappointed right after 3 days having the new phone. Is there any help for this problem, did we flipped the wrong switch somewere in an hidden submenu or is the phone broken? Thx for the help

  • No Sound During DVD Playback

    I have a new HP elitebook 8460p and there is no sound during DVD playback. Is there a setting I may be able to change? Here is a list of things I've tried and pertinent information:
    - Confirmed all system mute settings are off (e.g., not muted)
    - Confirmed DVD works on other devices
    - DVD will not play sound in InterActual Player, Windows Media Player, or VLC Media Player
    - Picture is fine...just no audio
    - Running XP
    - All other system sounds work
    Help!

    Try installing AC3 Filter:
    http://www.free-codecs.com/download/ac3_filter.htm
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I have a MX 860 Printer and it makes a squeaking sound during warm-up but not during printing.

    This printer is making loud squeaking sounds during warm-up, it prints ok but I don't know where it is coming from or how to go about fixing it.Any help would be appreciated.

    Hi Den,
    Please open the cover to the printer and look for any foriegn objects.  Also, please look in the paper feed opening for anything that may be out of place.
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

    After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

    I am having the same issue. I am updating to 6.1.3 to see if that helps. It is really annoying. It seems to vibrate as well as hiss on my ear piece speaker while on a call. I keep looking at the phone thinking maybe another call is coming in.

  • No sound during title playback

    hi i'm wondering if sum of you guys could help me out. ive just got my first mac and im very pleased
    i am trying to burn 3/4 episodes of a tv show that i have in .avi container, mp4 format, each aprox 350mb in size, to dvd format with the abillity to select which of the 3 episode i would like to watch. i am not fussed about glitz and glamour with regards to menus, just quality audio and video.
    i use ffmpgx for single movies
    i have previously used vso convertx to dvd with great results on a pc, but is not supported on mac.
    i have downloaded a divx component for quicktime, and also have vlc installed
    i have tried to burn the episodes using idvd, and all seemed to be going well, having set the preferences to allow for the img size needed. i left the dvd to encode over night and had it set to make an img file.
    when i tried playing back the img i had great video quality, but no sound what so ever, and cannot for the life of me figure out why.
    does anybody no the cause?
    to recap,
    avi container-(according to ffmpegx summary, video= mpeg4, yuv420p, 624x352)
    audio= mp3, 48000 Hz, stereo, 32 kb/s
    burned using idvd
    menu music is present
    no sound during playback of titles
    burn setting to x1/2
    taiyo yuden dvd-r disc
    1gb ram
    200+gb hard drive
    2gig intel core 2 duo
    minimal programmes running
    on another note, while on a pc i was using a program called gspot for determining the required video and audio codes required and whether or not it would render/play on the system. is there anything similar for mac?
    cheers for any and all help
    martyn, a new mac enthusiast

    Hi!
    Welcome to the discussions and to Macs!
    Don't know about your specifics, but a simple thing to test is to look at the iDVD menu for the titles....I am assuming this is on a submenu....to see if the audio icon is active. If you look in the audio well, there should be a tiny icon with wavy lines. If it is not present, click on the audio well and it should return. It is very small...I almost could not see it.
    You cannot see this if you have any audio files in the well, so remove the file first.
    I am sure more knowledgeable users will offer their advice as well.

  • How is it possible that so many people complain about the echo sounds during their phone calls, and that there is no reaction or sollution for this problem ???

    so many people complain about echo sounds during their phone calls , and Apple has no solution for this PROBLEM.???????
    I have an IPHONE 5, but I think if no solution is given by Apple, this one is the last iphone i bougth.

    My experience with iOS7 crashing seems to be tied to bluetooth and when I activate the keyboard in relationship to having a text box on the screen.
    Apple rarely acknowledges an issue, once they fix it, they just quietly bundle it into an update and it goes away.
    Issues can also be very difficult to track down given the number of iPads out there (millions) and I doubt (excepting school or business set up ones) that two iPads are identical. Issues can be hard to track down when the common denominator is hard to determine.

Maybe you are looking for

  • [mouseEvent] CPU Grab

    I have a sample application with 400 column charts below. (I am attempting to duplicate behavior noticed in a heavily databound 80-chart app.) If I allow my mouse pointer to hover over the application container (not the charts themselves--but the gut

  • Auto Numbering at Campaign

    Dear, I want to know how to set the Number at Campaign as Campaign ID. The number will have a running number. I used CRM 4.0 Please kindly anyone help me BR, Robin

  • No response after 10.6.7 update

    My 2007 17" Macbook Pro was working perfectly until I rebooted for the 10.6.7 OSX update. It never came back. I cannot even boot from a CD now, and I tried the PRAM zap. Does anyone have any suggestions? Thanks.

  • How to make my mac compatible w/ cs5

    i just upgraded my mac os x to snowleopard (version 10.6.3), thinking that'd allow me to use CS5 design standard, but it still doesn't meet system requirements for indesign. can i upgrade w/out having to buy a new computer and if so, what needs upgra

  • G/L allocation error

    Hi Experts, I am having a problem with an Item Group G/L allocation, we have assigned an item to a new Item group( was previously linked to a different group). The new group is allocated to a different account. However when we post invoices linked to