No sound, Intel 82801G (ICH7 Family) HDA Controller (Solved)
I've tried everything from the wiki to get this to work, along with alsaconf, but no such luck. KMix recognizes the card as "HDA Intel"; apparently the chip is a Realtek ALC262. I'm more or less at a loss: configuring my desktop was a snap.
Command output:
[harry@arch-top ~]$ uname -r
2.6.25-ARCH
[harry@arch-top ~]$ lspci -vv|grep Audio
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
[harry@arch-top ~]$ lsmod|grep snd
snd_hda_intel 336440 1
snd_seq_oss 30336 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 48432 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_hwdep 7428 1 snd_hda_intel
snd_pcm_oss 38656 0
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_timer 19848 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14848 1 snd_pcm_oss
snd 46628 11 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6496 1 snd
[harry@arch-top ~]$ ls -l /dev/snd/
total 0
crw-rw---- 1 root audio 116, 10 2008-06-11 00:54 controlC0
crw-rw---- 1 root audio 116, 9 2008-06-11 00:54 hwC0D0
crw-rw---- 1 root audio 116, 8 2008-06-11 00:54 hwC0D1
crw-rw---- 1 root audio 116, 7 2008-06-11 00:54 pcmC0D0c
crw-rw---- 1 root audio 116, 6 2008-06-11 01:03 pcmC0D0p
crw-rw---- 1 root audio 116, 5 2008-06-11 00:54 pcmC0D6c
crw-rw---- 1 root audio 116, 4 2008-06-11 00:54 pcmC0D6p
crw-rw---- 1 root audio 116, 3 2008-06-11 00:52 seq
crw-rw---- 1 root audio 116, 2 2008-06-11 00:52 timer
Harry
EDIT: Oooops, forgot to mention that I'm on a Toshiba Tecra S4.
Last edited by cautha (2008-06-19 17:48:52)
Okay... blacklisted sound-core in my modules array, but I still get this when I try to start oss-linux-free:
[root@arch-top ~]# /etc/rc.d/oss-linux-free start
:: Starting OSS/Open source driver [BUSY] Relinking OSS kernel modules for "2.6.25-ARCH SMP preempt mod_unload 686 "
This may take few moments - please stand by...
Relinking OSS kernel modules finished
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
ERROR: Module snd_hda_intel is in use
ERROR: Module snd_hwdep is in use by snd_hda_intel
ERROR: Module snd_pcm is in use by snd_hda_intel
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd_page_alloc is in use by snd_hda_intel,snd_pcm
Failed to disable conflicting sound drivers
Reboot and try running soundon again
Also check that you have not compiled sound support statically
into the kernel.
[FAIL]
Will another reboot actually fix anything, or do I need to remove more modules before I continue?
Harry
Similar Messages
-
Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8
Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
DVD / CD RW not working. 2 different drives installed together . Duel Roms not running media but are seen in My Computer.Try the suggestions outlined in
this post.
Carey Frisch -
I have downloaded the latest driver from Intel, Ver. 9.1.1.1016 for the Intel 82801BB/GR (ICH7 Family LPC Interface Controller 27B8 and Server 2008 Standard will not recognize the controller or hardware (Code 0028) I have checked on every possible thread discussing this event and no one has seemed to resolve this issue. The Mainboard being used is a Asus P564WS WS Professional LGA775
NOTE: All of the latest MS Server updates are downloaed and installed.Hi,
It seems there is no Windows sever 2008 compatible driver for Asus p5w64 motherboard.
For your information, you can check if hardware is compatible with Windows Server from the following website:
Windows Server catalog
http://www.windowsservercatalog.com/default.aspx
Thanks.
This posting is provided "AS IS" with no warranties, and confers no rights. -
RM CL-51 laptop driver missing (intel(r) 82801DBM LPC Interface Controller CODE 28
As the heading i have an UNKNOWN DEVICE with a yellow ? beside it. the only thing i can see is it is to do with intel(r)82801DBM LPC Interface Controller with the CODE28 which is no driver installed. I went to intel and downloaded and installed the R114079
driver but still the same. I have tried downloading the drivers from RM and running them but again no help. Can anyone help me with this. it would be much appreciated. i have just bought the laptopwith a fresh install so i think there is a missing driver but
i cannot find it.,....Unfortunately the hardware drivers are the sole responsibility of the hardware manufacturer. If the device is defective then there is nothing you can do in Windows to make it work. You will have to have some hardware diagnostics run on your system
by a computer repair technician. Troubleshooting hardware problems are not within the scope these forums.
You might obtain more information about the controller in one of the Intel forums where you will find people much more qualified to discuss issues with Intel hardware than here.
Your Intel 82801 chipset is part of the Intel southbridge family:
http://www.intel.com/design/chipsets/datashts/290655.htm
Otherwise you will have to discuss the problem directly with RM technical support.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Driver issue with Intel ICH9M LPOC Inte. Controller post windows 7 upgrade
Upgraded from vistahome premium to 7 proffesional and have hardware issue with this device
on Intel(R) ICH9M LPC Interface Controller - 2919
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
Went to intels website and could not find driver for 7 (there were drivers for vista & xp)
Any idea where to get driver for thisHi,
It really helps us help you when you identify your notebook with its complete product name or product number and include it in a post in you thread..
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name (p/n). Post one or both of them (with all alphanumeric characters here).
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Install on mobile intel 965 express family chipset
can i install windows 10 technical preview on mobile intel 965 express family chipset
Not very likely. It's an old and obsolete chipset and Intel has ended support of it with Windows 7. The latest drivers are almost 6 years ago.
-
Dear Support / Friends.
I am using G580 for the past 1.8 years. Over the last two days i am unable to connect to the internet using the Ethernet cable.The Lan Adapter is a constant Green/Orange Light. Tried reinstalling the AtherosLan(v2.1.0.21) driver, it says Installer can't find Qualcomm Atheros AR81 family Ethernet controller.
I have already rebooted the system by loading OS default in BIOS setup,removed the RAM modules for a while after switching off the laptop, but to no avail the problem still persists.
Surprisingly, I can connect to the internet only through the WiFi adapter.
Can any one help me resolve this issue, as I have been racking my head for solutions on the internet, including opening up the laptop and removing all the hardware components and re-assembling the G580.
Please help me fix this, as I have a feeling it is a software workaround more than a hardware failure.
Thanking you in advance.
Cheers,
air_289What interests me is the "LANDevice" listed. That is not present on my G580, even when showing hidden devices. I can not see mention of it anywhere on the net, would that be a possible indicator showing that Windows has remapped the LAN Device to some incorrect driver?
If I could see the Hardware ID from that device it would help me locate what it might be attached to. Right click on device, choose properties, then the details tab, then use the drop down to select Hardware ID, copy and past into your response.
Good luck.
PS - while you are cleaning, look at the pins inside the socket - none should be touching or crossed over, would "short out" the port. -
Intel 6 series/C200 Storage controller and AHCI
Hi All,
I have a T420s with the Intel 6 series/C200 storage controller and an Intel 160Gb SSD.
Its currently configured to use IDE. I've been reading that switching to AHCI will improve the performance.
What i haven't been able to figure out is, does this storage controller support AHCI?I could not agree more with you Jaco,
Since it is working very well, I should not make any further change. Thanks for your kind note.
I only wanted to have more supporting comments about the referred issue in order to proceed. Particularly from HP.
Thanks again Jaco.... -
Intel(R) ESB2 SATA RAID Controller not working out of the box
Dear all,
I'm using, for my tests, an old server with a supermicro X7DBN Server motherboard.
This motherboard comes with an embedded Intel(R) ESB2 SATA RAID Controller.
When I try a native installation from the technical preview DVD it sees the RAID1 volume that has been created (2 disk mirror) but when I select it to proceed with the installation there is an unknown error stating that it's impossible to write to this disk.
The same installation works perfectly with 2012R2 and the out of the box driver provided bin the install media.
An update from the previously installed 2012R2 to the Windows Server Technical Preview also works without problem.
It would make sens for MS to revert to the driver version embedded in 2012R2 for Intel(R) ESB2 SATA RAID Controller which is:
Name : Intel(R) ESB2 SATA RAID Controller
Date : 10.08.2010
Version : 8.6.2.1025
inf section : iaStor_Inst_RAID
Device ID : PCI\VEN_8086&DEV_2682&CC_0104Hi,
Thank you for the information. As you said from the behavior it seems that the build-in drivers of Windows Server Technical Preview will not work with the specific motherboard hence the RAID1 cannot work well.
I'll log the issue down.
If you have any feedback on our support, please send to [email protected] -
Intel HDS (ICH9 Family) - Stuttering Audio
I'm at my wits end trying to get this sound card to work. It's the last outstanding problem on my new laptop!
I've spent ages trying to get this going, but I've only gotten part of the way there.
The problem at the moment is, when I try to play a WAVE file as per below, the first (I'm guessing here) 500ms of the file just loop and stutter over and over again.
fukawi2 ~ $ aplay /usr/share/sounds/purple/login.wav
Playing WAVE '/usr/share/sounds/purple/login.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Stereo
^CAborted by signal Interrupt...
fukawi2 ~ $
It keeps going until I ^C the process.
Same thing if I try to play and MP3 in VLC... VLC says it's playing, but only the first half-a-second stutters over and over again
rc.conf:
MODULES=(r8169 !snd-mixer-oss !snd-pcm-oss !snd-hwdep !snd-page-alloc !snd-pcm !snd-timer !snd snd-hda-intel !soundcore)
DAEMONS=(@syslog-ng !network hal dhcdbd networkmanager netfs @crond @sshd @openntpd @alsa @fail2ban)
lspci | grep Audio:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
aplay -l
**** List of PLAYBACK Hardware Devices ******** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
default:CARD=Intel
HDA Intel, STAC92xx Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, STAC92xx Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
Discard all samples (playback) or generate zero samples (capture)
EDIT:
http://www.alsa-project.org/db/?f=5a1ab … 06dc977308
Last edited by fukawi2 (2008-11-12 04:09:09)Will be an alsa problem then I would say. You could try a snapshot from the link i put above. There are a load of hda fixes in it. Its just the current vanilla kernel (2.6.28-rc4-git1 last i checked) with all the current alsa patches/fixes applied so any other custom kernel patches should work fine on it.
Nvidia driver is a bit of a hassle with the new kernel though, Ive done all the googling for you earlier today when I built mine
For the PKGBUILD you need this (the bit with the comments around it) after the cd $startdir line. Its a total hack so I didn't worry about it being pretty
It relies on the src/linux-xxx dir being there, as the alsa kernel is packed into alsa.kernel or something, just rename it to linux-2.6.28.
cd $startdir/pkg/usr/src/linux-${_kernver}/include && ln -s asm-$KARCH asm
# HACK : NV 177.80
cp -R $startdir/src/linux-${_basekernel}/arch/$KARCH/* \
$startdir/pkg/usr/src/linux-${_kernver}/arch/$KARCH/
mv asm-$KARCH/asm-offsets.h ../arch/$KARCH/include/asm/
rm -rf asm-$KARCH
ln -s ../arch/$KARCH/asm asm-$KARCH
Then whack this patch in the nvidia PKGBUILD where it says to put patches.
http://andrew.nelless.net/patches/nvidi … 6_28.patch
Last edited by shazeal (2008-11-12 02:03:59) -
[Solved]no sound intel ALSA
please help me, i have not idea about that.
and my English is very pooooooooooooooor....
I follow:
https://wiki.archlinux.org/index.php/Ad … chitecture
$ pacman -S alsa-utils
$ alsamixer
F6 Select sound card
sound card
┌───── Sound Card ──────┐
│- (default) │
│0 HDA Intel HDMI │
│1 HDA Intel PCH │
│ enter device name... │
└───────────────────────┘
I hosed the HDA Intel PCH
press M turn the Master to unmute and turn it up (Item: Master [dB gain: 0.00])
press Esc
$ speaker-test -c 2
speaker-test 1.0.28
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
$ speaker-test -c 8
speaker-test 1.0.28
Playback device is default
Stream parameters are 48000Hz, S16_LE, 8 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
$ lspci -v
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
Last edited by keol (2014-10-23 16:57:30)Set the default sound card
$lspci -nn | grep -i audio
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
$vim /etc/modprobe.d/alsa-base.conf
options snd-hda-intel index=0 model=auto vid=8086 pid=8c20
options snd-hda-intel index=1 model=auto vid=8086 pid=0c0c
saved and reboot. -
No sound on VIA high definition audio controller (i think)
This is what should make sound on my laptop:
04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)
aplay -l shows:
**** List of PLAYBACK Hardware Devices ****
card 0: VT82xx [HDA VIA VT82xx], device 0: VT1708 Analog [VT1708 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: VT82xx [HDA VIA VT82xx], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
I have tried both the snd_hda_intel and snd_via82xx drivers but they both don't work... even with this modprobe.conf:
alias char-major-116 snd
alias char-major-14 soundcore
alias snd-card-0 snd-hda-intel
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
No sound whatsoever thoughTry using the ac97_quirk option in modprobe.conf:
options snd-via82xx ac97_quirk=n
Where n ranges from 0 to 3. Start with 0 and work your way up.
Last edited by Gullible Jones (2007-10-02 05:36:08) -
Question about the Intel driver for the IDE controller
Greetings to all:
Lenovo has recently published another driver for the IDE controller and I wonder how many of you that have a T60, T60p, T61 and T61p have been able to actually install it.
My controller device is:
Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4,
both in XP-SP3 as in Vista SP1, 32bits versions ( see bellow details of my T60p, which has 2 hard drives)
Interestingly enough the driver on each is v:7.0.0.1020 (2005/05/23) for XP and v:6.0.6001.1800 (2006/06/21) for Vista-B. They are working well as far as I see, but now and several times before, I have tried to update them but they do not install. The message is that I have already the best driver. I noticed that the label of the controller is not quite exactly spell out in the instruction text file or the .inf, and the one that comes close, is that of the so call ICH7-M family.
Why is this? There are at least 7 versions discussed in the history. It it perhaps because the one for the ICH7-M family is always the same? System update does not install them either.
Forgive my curiosity but why bother publishing if they can not be installed? Or perhaps somebody has. This is not logical.
Cheers.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock
Solved!
Go to Solution.For those who think I can not follow directions.
First, the driver for the Intel IDE device in a T60p is obviously from Intel. But there are two ways to get it fulfilled.
Lenovo publish the Intel drivers with perhaps there own twists, refinements and in the absence of clear contrary information, that they are perhaps more fine tuned to the machine. It uses the following inf files to have them install: iaahci.inf and iastor.inf. They are revised whenever Lenovo fell is necessary and eventually published.
I must assume they are in use if you have a Vista system originally installed by Lenovo and that is why those inf are the ones you find in the updates.
Mi T60p was purchased 2 years ago with XP-Pro, just before the release of Vista, with the understanding of a free upgrade to Vista-B shall be send when finally released. An Indeed they keep their word and send me a Lenovo branded full version of MS Vista-Business, some 4 months latter (not an image). Rather than upgrade XP-Pro and to avoid the time in limbo and work interruption of the Vista less desirable over XP, I did a successful clean install into a new hard drive, followed by a Lenovo system update, which changed many drivers and installed programs, etc. But as you might imagine, the Intel IDE-SATA driver installed is the one provided by MS (v:6.0.6001.1800 of 2006/06/21), (which uses a different installation file mshdc.inf) and, until proven otherwise, I must assume more generic, since it is for any and all machines, following the standard of the hard drive SATA type.
Talking to Lenovo support for nearly 1 1/2 hours last week, was at least not good for my blood pressure, while attempting to explain the issue and refuting a collections of nonsense from the support tech. Eventually a supervisor assure me that the driver was the same and that it has not change for a long time, as it is the same even for XP. Well, why bother with updates if that is the case? But I see that there are others IDE drivers species for animals such as Dell, or HP, etc. Thus you must accept that there is a strong case for a Lenovo modified Intel driver and thus the updates. Tech support could not answer such question, nor they were able to install version 8.6.0.1007 (date 2008/12/04) of the driver.
I fell the machine is working well, but have nothing to compare with (MS Experience Index 4.3). And as usually happened, sometimes you do not appreciate how sick you are, until you get cure. The question remains about the driver been generic and sufficient or specific and optimal.
Cheers and happy holidays.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock -
Intel Graphics Display Controller [Solved]
I like to spend time trying to understand my installation. In my investigatiosn I found the following:
# lshw -C display
*-display:0
description: VGA compatible controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 07
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:45 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:40f0(size=8)
*-display:1 UNCLAIMED
description: Display controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 07
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
resources: memory:d2400000-d24fffff
does this "*-display:1 UNCLAIMED" mean that the device is not used and lacks the correct driver?
Thanks
Andrew
Last edited by fdservices (2013-01-13 13:26:04)That means you only have one display device connected, so unless you have two connected, just ignore it.
If you look under description you will see that one is VGA and the other is the display adapter.
Regards.
Andrzej
Last edited by AndrzejL (2013-01-13 13:31:09) -
T440s display question / Intel HD Graphics family
I bought T440s (windows 7 pro) with FHD WWAN screen and I am noticing that my older T430s (windows 8 pro) has a clearer and brighter display. Both have the same Intel controler (Intel Graphics 4400). Screen colors on T440s are warmer (yellowish) than on T430s which has whiter and more appealing/cleaner display/colors.
T430s explicitely shows Intel(R) HD Graphics 4400 in the device manager while the new T440s shows Intel(R) HD Graphics family only. There is no reference to to 4400 although my order information shows Intel 4400.
Could someone please clarify how this display difference is possible. Should I check with tech support if I received a less quality hardware on my T440s.
Many Thanks!See this:
http://www.nvidia.com/content/optimus_technology/optimus_technology_popup.html
Go into BIOS by pressing F1 at the ThinkPad POST screen > Config > Display. You should see a switchable graphics option here. Make sure it is set to Optimus.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
Maybe you are looking for
-
Why doesn't the poster image show up as the first frame of my movie?
I am new at this and maybe misunderstand the Help screen. I have a bunch of short movies which I have laid out in iWeb and published to my iDisk. I want them to load with a still image from the movie rather than show up as a black frame. The meager H
-
How to sync the iTunes songs library with other two computers thru iPhone?
I have three Apple computers, the main being iMac 24", on which I usually purchase music from iTunes and import from my CDs. Thus, it has the biggest collection of songs, roughly about 1200. I also sync my iPhone 3GS 32 GB with this comp, and songs f
-
Adding Journal Entry throgh Incoming Payments,
Hi Friend, I need Help .... I need to create a journal entry using incoming payment. I have different types of deduction Accounts. All deductions need to display in journal entry and also its reflect in Invoice.Then only invoice going
-
A non-obsoleting multiversioning package management filesystem.
I found this in another topic (http://bbs.archlinux.org/viewtopic.php?id=56108), and found it very interesting, since I have conspired to do the same thing myself. The question that has always kept my attention is, "how to eliminate packages from bre
-
I inadvertently pressed "emergency" then put in the too many times. I am technologicallly handicapped---that is how I got in trouble to begin with --> by playing with my iPhone 3G! Any and all help will be very much appreciated. In one place on