No sound notifications on 4s for all apps. Texts and mail do work.

I am not recieving any sound notifications for any of my apps. Texts and mail do work. All settings are on and correct. That im aware of. Any suggestions.

Hi there,
I represent the company who developed the Word World app.
Please visit our support page below for help with the sound issue you are facing.
http://www.beancreative.com/content_1612.cfm
Thanks,

Similar Messages

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • Bluetooth mode prevents notification sounds for all items (Text, Alerts, Mail, etc.), except the phone ringer?

    It seems that the use of the iPhone 4 Bluetooth to a phone headset (In this case a hearing aid 'streamer') prevents all other phone option sounds (Text, Alerts, mail, etc.) from working. Is it normal that there is a conflict between the iPhone 4 Bluetooth use and other phone item sound notifications?

    No, iOS does not offer that option. You can offer Apple feedback here: http://www.apple.com/feedback/

  • Stereo speakers mod for ALL apps and sounds

    Hi Sony Community,
    I want ask you if there is a mod without root to use the speakers of my Xperia Z2 on stereo for ALL apps, calls and sounds (system and not system).
    I found very bad that Sony hasn't optimize Android 5 with this feature because the speakers of Xperia Z2 are very beautiful and functional, better than Z3, but without stereo output are very limited and reduce the potential of this smartphone!
    The stereo front speakers of Xperia are one of the GREAT and BEST design features against ALL Samsung and Apple devices, so I don't understand why Sony use they on stereo to give us a powerful and especially COMPLETE sound output
    I hope in a future implemention of this setting into next firmware update, but now I will very haapy if there is a sostitutive mod to force to use speakers o stereo for ALL.
    Every answers are welcome to me!
    Cheers
    Solved!
    Go to Solution.

    No problem.. It's as safe as any modification of software I guess. I have never had any issues, but yes I'm sure just rooting the device will not lose your drm keys. You only lose drm keys when unlocking the bootloader which I do not feel comfortable doing.
    There's a full tutorial on XDA on how to do this. To sum it up, you pretty much have to downgrade in order to root and have custom recovery, then flash a pre-rooted stock rom. This will give you 100% stock experience, but with root added. Then you can choose which mods, etc you like to flash like the one mentioned above.
    It doesn't require too much knowledge, and isn't too complicated, but I'd still recommend reading up on it a lot before doing it, just in case anything happens. I always make sure I read instructions in full at least 3 or 4 times to feel comfortable.

  • After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

    After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Email Notifications through workflow for all Approved and Rejected Orders

    hi,
    i have to send Email Notifications through workflow for all Approved and Rejected Orders to the user who have submitted the order for approval.how could it be done.please send ur solutions.
    regards
    yesukannan

    Hi,
    An option would be use Oracle Alert. Create an event based alert on the table where you have order approvals or rejections. This alert will be raised after inserting or updating this table. Create an action linked to this alert, and choose message as action type.
    This setup can be done under Alert Manager Responsibility.
    Regards,
    Ketter Ohnes

  • My mum set up an iCloud account and forgot the password, and this caused me to create a new account. The new account works for the App Store and all that, but I can't change the initial iCloud account without the password. Help?

    My mum set up an iCloud account for my iPhone 4 but forgot the password. This caused me to create a new account, and it can be used for the App Store and iTunes and all that, but I can't change the initial iCloud account (the one my mum made). My device keeps prompting me for the password every few minutes after updating to iOS 8, and I've tried every option possible to retrieve the password, but I don't even know the answers to the security questions and I can't find the password reset email anywhere and I don't know the back up emails my mum used. I literally cannot find any legitimate way to sign out of the initial iCloud account without entering a password (which neither I nor my parents know). Is there a way for me to retreive the password or change to my new account without the password?

    See:Creating an iCloud account: Frequently Asked Questions and How do I mange iCloud account about 3/4s of the way down.

  • IOS keyboard in landscape mode for all apps

    Can apple make the iOS 6 keyboard have the option to use landscape mode for all apps?
    -Thanks!

    No, there is not.
    You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • Kernel Upgrade for all App systems

    Hi,
    I have to do a Kernel upgrade soon. I have one CI DB cluster and 4 App servers. Do I have to upgrade the kernel on each app system and the CI? I mean, do I have to copy the files to the RUN folder for each App server and for the CI?
    Thanks

    Hi
    Ensure that you are using the SAP kernel recommended together with the latest SAP stacks for your product. For detailed information, see SAP Service Marketplace: http://service.sap.com/sp-stacks
    SAP releases Support Package Stacks, including kernel patches, on a regular basis (2-4 times a year). Therefore, we also suggest you create a strategy to implement these stacks periodically.In special cases, you may need to use a more recent kernel patch than the one shipped with the latest Support Package Stack for your product like in case of traces.
    Yes you need to update the patch level of all the servers in the system.
    Hope this helps!!
    Kind Regards
    Esha Rajpal

  • Anyone get FCS 2 upgrade box ? Hardcopy manuals included for all apps?

    Subject says it all... anyone have the $499 upgrade box yet? I am hoping for manuals for all apps... ( well except DVD Studio Pro 4 - it has not changed).
    thanks
    Still waiting for it to arrive in my local Apple store...

    I received all the manuals with my FCS1 upgrade box.
    They weren't included with the CROSSGRADE, but they were with the FCS1 upgrade.
    Haven't bought the FCS2 upgrade yet, so I can't speak to that, but they were in the FCS1 upgrade.

  • Since 8.0 update on my ipad, I can't find autocomplete settings, which used to work for all apps. So much for new and improved.

    Since 8.0 update on my ipad, I can't find autocomplete settings, which used to work for all apps. So much for new and improved.

    Settings > General > Keyboard

  • Why am I all of a sudden getting all my text and email notifications in Spanish?  How do I change back to English?  Can't find in profile settings?!

    Why am I all of a sudden getting all my text and email notifications in Spanish?  How do I switch back to English?  I can't find that option in profile or notification settings . . .

        elliew,
    That's a great point! If all other messages and apps on your phone are in English, the preferred language may need to be updated on your account. If this is the case for any of our customers, just reach out to our customer support team at 800-922-0204 or http://vz.to/1vsIHJq .
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Macbook Pro - All app updates and newly installed apps disappear after shutdown, how do i fix this?

    All app updates and newly installed apps disappear after shutdown, how do i fix this?

    Hello Masterklaus69,
    Thanks for the question. After reviewing your post, it sounds like there is a lot of data in the Other catagory. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    OS X: What is "other" space in About This Mac?
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My iphone 4 has no data storage. I have deleted all apps, music and texts and it still says I only have 1.9 GB available. There is nothing in my storage.

    My iphone 4 has no data storage. I have deleted all apps, music and texts and it still says I only have 1.9 GB available. There is nothing in my storage.

    The problem could be that you don't have enough storage on the device itself, not on iCloud.  Go to Settings>General>Usage to see how much "Storage" you have available on the device.  Farther down the list is the available storage on iCloud.
    Also check:
    Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well.  Tap Show All Apps to get the complete list of apps and MB used for backup storage.
    A device needs many MB of storage in order to perform a backup to iCloud.
    Also see:  http://support.apple.com/kb/ht4847`

  • Samsung note 3 is not giving audible alerts for all my text messages since the 4.4.4 update.

    Samsung note 3 is not giving audible alerts for all my text messages since the 4.4.4 update.  I get an audible tone about 3/4 of the time.  Thinking a conversation is over I come back 45 minutes later to find another text I didn't know came in.  I've restarted my phone and checked my message settings.   Any ideas?  Factory reset is not an option!

    I'd try going back into the Text Message settings. In Sound setting, work the setting from None to an alert. Then in Vibrate put a check in the box then uncheck. Just to see if that will free it up, could be a possible corruption with the new software update?

Maybe you are looking for