No Template Found while creating Asset

As admin I have created new template, flex definition.
As a contributor when trying to create Flex Asset, it is not showing any Template. Gives a message 'No template found. Why it doesn't take the Template created.

Hi there,
just a couple of basic questions:
1) Did you enable the template asset type for the "Store" site ?
2) When you create the template you can assign it to specific asset types, does the template apply to the "StorePageDef" asset type ?
for more info on creating templates see the developer's guide : 23.4 Creating Template Assets
kind regards,
Pietro

Similar Messages

Error While Creating Asset Class

Hi Friends,
I am getting the following error in development client while creating the asset class AB2200.
"Screen Layout 200 was not created" but the same was created.
Please guide me how to handle this error and the reason for me getting this error message while creating asset class.
Your quick response would be highly solicited.
Thanks and Regards,
C.R.Srinath

Hi Srinath
There are 2 things.. Create the screen layout and Define the screen layout... (IMG> AA > Master Data> Screen Layout for asset classes)
Complete both the steps here and specify the same sccreen layout in your asset class
Regards
Ajay M

Error message AA119 while creating asset master through AS01

Hi
while creating asset master (AS01), i am getting following error:-
Depreciation key M003 not allowed (Check your entry)
Message no. AA119
Diagnosis
Depreciation key M003 is not defined.
System Response
Processing is terminated.
Procedure
You have the following choices:
Use a defined depreciation key (use input help).
Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
I have done following in configuration:-
1) No change in base method
2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
3) No change in Period Control Methods
4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
5) save the configuration
6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
7) Import the configuration
now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
In target client, depreciation key display in Active stage.
please revert if anybody has any clue to come out from above problem.
Regards
DD

Dear All Foram members
Thanks for your response.
I got the solution and now problem has been resolve.
Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
Thanks Pankaj, Madhu and Paul...........
Regards
DD

Error While Creating Asset Master in AS01

Hi,
While creating Asset Master in AS01,I am getting the below error.
E003 SYST: Period 000 is not valid in financial year variant
I am using the standard Fiscal year variant V3
Kindly help me to fix this issue
Thanks
Kishore

Hi
GO to the transaction code OBY6 , double clcik on company code and see have you asigned the fiscal year variant to company code
Kindly revert in case of any query
regards
roobal

Display of Profit Center field while creating asset in AS01

Dear Experts,
I have a requirement of displaying profit center field while creating asset in AS01. Currently there is no option of profit center in AS01. My client uses the profit center reporting, so they want to assign a profit center at the time of creation of asset in AS01.
Is this possible to display profit center field in AS01, or else any other option to tackle this issue.
Regards,
Juned

Hi,
You can only have COST CENTER in asset master, but not profit center.
You have to maintain the respective PC in cost center master data only.
If Cost Cetner field is also not in AS01, then you need to activate it first.
SPRO->FA->AA->Integration with GL->Additional Account Assignment Objects->Activate Account Assignment Objects.
Here you need to activate COST CENTER field. Now you will be able to change the field status of cost center field in screen layout for asset master data as REQUIRED field. and SAVE
Then in AS01 you can enter COST CENTER
Regards,
Srinu

Problem while creating assets using BAPI

Use table enhancement BAPI_TE_ANLU
Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.

Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
Regards,
Shyam

Country specific "Israel " not found while creating wage type in ECC 6

Hi
While creating the wage type , I am not able to find Israel as a country in the drill down.
Should this be taken as Others or what is the procedure when we are unable to find a country to select.
Thanks
Vardhini

Hi Vardhini,
You dont have payroll driver for Israel.. You have to assign Molga "99" in u r user profile, and u also need assign "99" as molga in the node assignement of personnel area to company code.
Hope this should resolve ur issue.
Regards
Anil.C
Reward the points if my answer helps you out.

Error while creating asset through AS91

Hi All,
When i am trying to create asset through AS91 for a new company i am getting error AY 252 " Current fiscal year 2007 has to be after transfer daet 31.12.2007. In this company the Asset accounting has been recently customised but when i am trying for the upload of asset master data i am getting the above given error.
Please tell what should be done to remove this error.
Thanks & regards,
Prachi

Check the transfer date for asst data transfer...make sure the current fiscal yr is after the transfer date
Asset accounting>Asset data transfer>Parameters for data transfer>date specifications>Specify transfer date/last closed fiscal yr.

Audit types which are configured not found while creating Audit

Hi Experts,
Please help me to solve the below problem-
I have configured new Audit types in Audit managment. But while creating Audit in transaction PLMD_AUDIT, I could not find these in drop down of Audit type. How to rectify this problem?
Thanks in advance
Kiran

1. In which system you are checking - if you have checking in Quailty client make sure your configuration has been transported from your
2. Just make sure you have configured the audit type -> SPRO -> cross app. components -> audit management -> audit definition -> audit type.
There is no possibility you cannot see in the dropdown.
Regards-

Integration Server not found while creating Business system

Hi all,
I m facing following problems in XI.
While creating Business system, "integration server" name is not displayed in the drop down box. and
I m getting the error "Unable to read software component versions from System Landscape Directory "XXXXXX:50000"" while importing software components in Repository from SLD.
thanks and regards
vijay

Hi Vijay
Please check if you have assigned the correct Integration server to the business system in SLD.
and for the the software component error check if the user has required access (roles assigned) for importing the software component.
Thanks
-Mitesh

Asset class while creating assets

Hi
I have a small question.
when I create assets with AS01, I can see other companies' classes....
(some companies' use the same chart of deprecation table ,some are not.)
Can I control that only let user see his company's assets class...?
Regards,

Hi,
you can make a authorization check for company code.
Asset class is a cross object.
regards Bernhard

Error while creating asset master on a new company code

Hi there,
While trying to create a new asset master - Asset class XXX cannot be used in company code XXXX
    Message no. AA130
Diagnosis
    When you create an asset, the system determines the chart of
    depreciation from the company code definition. In order for a chart of
    depreciation to be available for an asset class during asset
    maintenance, the chart of depreciation has to be entered for that asset
    class (Determine class valuation). Chart of depreciation YYYY that was
    determined is not entered for asset class 123
System Response
    You cannot create any assets in your company code for this class.
Please revert if you have any details regarding this. I am sure I am getting this error because of a missing entry in v_ankbv. But i am not sure on what is the config step i m missing.
Thanks,

You need to configure the node 'Determine Depreciation Areas in the Asset Class' T Code-OAYZ.
Path : Financial Accounting (New) > Asset Accounting > Valuation > Determine Depreciation Areas in the Asset Class.
Assuming you have already done the other prior config steps involved like., Assign Chart of Depreciation to Company Code, Asset Classes etc.,
You can also refer to the Best Practices Configuration guide (Link Below) for further details:
http://help.sap.com/bp_bblibrary/600/html/N72_EN_DE.htm
Regards
Sreenivas
Pls close the post if satisfied.

Unit of Measurement Field showing Gray while created asset master

Dear All,
When I am try to create the asset sstem is showing the Quantity Filed but the Unit of Measurement is showing in Gray.
I also check the screen layout rule but still it not coming as an input field.
Kindly help me out to resolve this ASAP.
Regards,
Sandeep

Hi,
Please check the screen layout assigned to the asset class under which you are creating the assets and then check the screen layout rules of that screen layout whether the field "Unit of measurement" is optional or not.
Thanks Monoj

Vendor not found while creating SC after replicating from r/3 to srm

Hi all
I tried to replicate some vendors from r/3 to srm and when i used the t-code bbpgetvd i got a message that it has already been replicated but wheni am trying to create a Shopping Cart and assigning vendor to the cart it is giving me a message that no supplier is assign and no possible source of suply found in the system?PLS answer my question its urgent.

Hi Pooja,
I understand that you have moved your partner information from R/3 to SRM. In SRM, all the Partner(vendor) information is stored in BUT000 master table. The type of partner = 02.
Go to transaction BP in SRM and check for the partner data. If found, go to master table BUT000 and check there. If you dont find your data overthere track the msg flow.
Else you should be able to create the cart.
Regards,
Karthik Babu
Edited by: karthik babu pulluru on Jan 13, 2012 7:38 AM

PARTNER PROCESSING OBJECT BUS2032 NOT FOUND WHILE CREATING SALES ORDER

Hi All,
I am not able to create a sales order it gives a Error "PARTNER PROCESSING OBJECT BUS2032 not found". Can any one inform me what could be a problem. Thanks in advance.

Yes, The Partner function SP is active.
We had a work around.
When the sales order was saved, being in Partner function Tab we got the error message. However when we returned to the Overview and saved the Order, we were through with the same. But, Iam not sure how could this happen.

No Template Found while creating Asset

Similar Messages

Maybe you are looking for