Nokia 5800 doesn't work after software update

hi,
couple of hours ago i downloaded ovi suite to update my phone's software. then my phone restarted as it was supposed to ,at first it didn't accept my lock code,and now it doesn't work AT ALL. i tried everything,all i see is the blue "nokia" thing then it freezes. it would be awesome if anyone could help. Thanks in advance.
Solved!
Go to Solution.

Try a hard reset
http://friedbrains-friedblogs.blogspot.com/2009/02/3-finger-salute-for-5800-full-hard.html
It WILL sort it
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Airport EXPRESS doesn't work after software update on Airport EXTREME

My Airport Express stopped working after I did my software update for my Airport EXTREME the other day. It lost the connection to my Airport EXPRESS and so I did a hard reset and tried to redo the whole profile but after many, many hard resets, I still can't make it work.
Airport Setup Assistant shows that the setup is complete and everything is fine. But if I select "Extend my wireless range", after the setup, my Airport Express won't even appear anywhere. If I select "Join my wireless network" then it will appear with a 169.xxx.xxx.xxx IP address under my Airport Utility. It will also show up on my iTunes but I can't open it using Airport Utility and iTunes spends a long time searching for it and then gives up. In all the above cases, the amber light remains flashing and the green light never comes on. What else can I do to fix this??

Either change the channel that the phone is transmitting on or change the channel the Express is transmitting on. You can do the latter in Airport Admin Utility; the former depends on your phone.

Samsung Galaxy 5 touchscreen doesn't work after software update

I updated the new software for my Galaxy 5 today and now have no touchscreen capability. I can't even power it off.

You can remove the battery to power off your phone to see if that clears up the issue for you. If the issue persists, you can do a hardware factory data reset on your phone. This will delete everything stored on your phone's internal storage and reset your phone to the factory state. The recent update will still be there, however. I could only find written instructions from another carrier's website, but it will apply to your phone, as well. See the link below: http://support.t-mobile.com/docs/DOC-10404

Nokia e66 doesn't work after failed update!

Yea i was updating firmware and my phone restarted on the Ovi suit seed that it's normal but it didn't turn back on it just flashes the buttons and thats all few seconds later it turns of.
Please help my!

Welcome to the forum!
Have a look at this post as a precursor to visiting Care Point if unsuccessful:/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/m-p/398147/highlight/true#M112
Happy to have helped forum with a Support Ratio = 42.5

My SuperDrive doesn't work after Lion update

My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
Thanks

I too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.

Nokia C7 GPS not working after belle update!

Hi everyone, i had a C7, working great till i updated it with symbian belle.
okay here is what i did.
-my GPS was working on symbian anna with maps version 3.06beta
-i updated the phone to symbian belle from symbian anna.
-installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
-this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
-i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
-my GPS could still not work after i stood in the same damn field for another half an hour.
-now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
-i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

Hi akkudub,
Welcome to Nokia discussions board!
Have you used Nokia Suite for the update?
I advise you to follow the steps below in order to get your GPS fully working again:
1) Uninstall the current version of Nokia Suite that you have.
2) Clean the registry with a registry cleaner.
3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens.
4) Download the newest Beta version of Nokia Suite from this link:
http://betalabs.nokia.com/apps/nokia-suite-beta
You will need to sign in to your Nokia account - the same credentials used to log into this forum.
We will appreciate your feedback once you have tried this program!
Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Nokia Social is not working after FP2 Update

Hello,
Nokia Social stopped working after FP2 update. It says '' Unable to start ''.
When it was working i had problem about imaging facebook photos. The photos that i click on were so blurry that i could not see it clearly. I had hope to see a fix about that problem but it was same until it stopped working. What is the problem that i cant see my and friend's photos clearly?
Many thanks

it gives service not availabe ,getting service etc......but works social verion1.5.....y so help out plzz ASAP

Nokia E66 - Lost Txt's after software update - can...

Can anyone advise me if it is possible to retrieve my messages from my phone after software update?
I have tried 'some' recovery software but they do not recognise the 'phone' as a part of my pc.
Has anyone had similar issues?

If you didn't make a backup before updating, all data is lost.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Route 66 won't work after software update

After repair my nokia E71 has been flashed with software version 400.21.
Now my route 66 is not working anymore.
can anyone help me with this problem?
Updates from Route 66 didn't work eighter
regards Robert

I don't really understand why new systems are not designed to handle old software.
Neither do I.
When iLife '08 was released, Apple made iMovie 6 available for download for owners of iLife' 08. But since the release of iLife '09, the iMovie 6 download was pulled. So you are a few months too late for that download.
What can I do that doesn't involve spending more?
There are a few options, some of which involves spending.
You may partition yor hard drive (Apple's Disk Utility) into to parts: One with Leopard and one with Panther or Tiger. The latter is where you install iMovie 4 and iDVD 4. Don't forget to do a VERIFIED backup BEFORE you start.
OR
You can buy a used copy on iLife '06 on eBay. Many are in your position, so I hear the prices are rising.
OR
If you have an external Firewire hard drive, install Panther/Tiger, iMovie 4 and iDVD 4 on that drive.

Desktop image center doesn't work after OS update

Hi -
I just updated the OS with software update. I always had the same picture on my desktop and I used the "center" selection so it was zoomed in. Following the OS update (10.7.5), the "center" selection no longer works. When I click on center it shows it zooming in on the preview window, but the actual background doesn't change. The picture is correct but it stays the same.
So right now the selections "fill screen" and "center" are working exactly the same. (Again, when I click center, the preview looks correct but it doesn't change the background.) This worked great until the OS update.
Anyone else having issues with this?
Thanks!

Yeap I am encountering the same problem as well after update to 10.7.5 just yesterday... I am currently using a October 2011 Macbook Pro

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

N73: restore doesn't work after firmware update

Hello!
I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
After the update I tried to restore the backup via the same app.
Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
Is there another solution that doesn't involve buying this 3rd party software?
TIA

The phone is working well...
I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

Internet Connection doesn't work after windows update.

Hi everyone,
my boyfriend recently updated his laptop.
After the update his computer wouldn't work anymore. I went on the web and read some topics on the forums. And even tried some of them already.
I don't have Norton or Mcfee security software.
Operating system is Windows 7 and it's a 64-bitssystem.
I tried disabling ipv6 but that doesn't help. When i open the cmd and type ipconfig/all i get an overview of several adapters.
DHCP is enabled for everything but Tunnel-adapter for LAN-connection * 3: (sorry translating from dutch).
Also IP-routering and WINS-proxy are disabled.
Also i checked the recent updates. But for some reason the failing ones aren't amongst them.
Can someone pls help? Im wellknown with OS and can try to work with anything u name.
Thanks in Advance!
Nilu

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.

C7 sync doesn't work after Anna update

I normally sync the agenda between outlook 2003 and C7 with Ovi-suite.
After update to symbian Anna it doesn't work.
Strange is that Ovi suite gives the number of events that did not sync.
So he can recognize them, but can't sync.
Any solutions?
Thanks!
Pietth

I have the same problem in C6-01 after Anna Update, there are another two posts around here with other people with the same issue, an, believe it or not, no answer from Nokia
My problem also affects Ovi Maps favourites. I just could update them once since Anna Update, and now that is failed too

Nokia 5800 doesn't work after software update

Similar Messages

Maybe you are looking for