Nokia 9300i outer lcd only has light but no displa...

My nokia 9300i out lcd only show light but there is no display or startup splash screen. Internal display if fine. I am able to dial from outside display, but no letters / menu are shown.

umm......i dont think throwing the phone against anything is a recommended to fix anything.
take it to a nokia care point to let an engineer take a look at it.
u shoudl be able to find the nearest care point to u by clicking on the contact us link at the top of the page
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Similar Messages

I am a teacher who would like to use my Ipad2 in the classroom -but out school only has projector that has VGA inputs. And just to complicate thing I was to use it wirelessly (I have an Itv also). Can I get true mirrioring?

I am a teacher who would like to use my Ipad2 in the classroom -but out school only has projector that has VGA inputs. And just to complicate thing I was to use it wirelessly (I have an Itv also). Can I get true mirrioring?

The one you are looking at I believe is an older model and does not have very good reviews for working with an AppleTV2 / iPad 2 setup.
Here is the one that has worked for our district:
http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC/ ref=pd_cp_e_2
I can't say if the one you are referring two works or not, however I can say that based on the reviews, it looks like you may run into problems with the $45 version.

HP(Compaq) mini 110 has lights but won't turn on

My Compaq mini 110 won't power up. The light where the plug attaches is lit. The wite and blue leds on the front are lit. When the power switch is activated, the internal fan bumps but immediately stops. No noises of any kind. Battery is unplugged - just the power cord used. Main system board just replaced and it does the same thing so that is not it unless I got a bad replacement board. The powerboard has 19V at the main 4 pin connector (2 red and 2 black wires). I cannot find a pin out of voltages for the 18 wire connector running to the mainboard. Could the power board be bad but still light all lights? Not sure what to try next.

Hi,
I have the same problem. Started to night... Computer operated normaly and then just gave a bluescreen... Now works for 30min and then shuts off. I dont hear the fan work at all. I cleaned the fan with air and still dont work. How to make sure that the fan works? and how to replace if it dosent work.
- Mika

ISync: Nokia 9300i--- Calender Sync Broken

Hi,
Post update to 10.4.9, there was a strange behaviour in iSync with Nokia 9300i.
Every-time the sync was about to complete, it used to get broken (while syncing calendar). The phone get's message that the link is broken.
I tried everything from re-installing Mac OSX, Upgrading it back to 10.4.9, Upgrading the firmware of Nokia 9300i & Applying DST Patch on phone, but no avail. The Calendar seems to be broken.
On going to Console, i found the following error data, which repeats exactly the same way every-time i sync the phone:
9:02:14.447 [iSync:275] ERROR (IPH): relation does not contain key com.apple.syncservices:511F771F-F089-431B-AAC4-E3797500777E for relation audio alarms
19:02:14.826 [iSync:275] ERROR (IPH): relation does not contain key com.apple.syncservices:0D1570A2-FAD7-4E12-B8FD-D859E8B16389 for relation audio alarms
2007-03-27 19:04:11.872 iSync[275] SyncServices precondition failure in [ISyncConcreteSession clientRefusedChangesForRecordWithIdentifier:]: I know nothing about a record with identifier 75E5A48B-BEA2-416F-9682-F4514CB7D85D. Are you sure you got it from this session or from the session's snapshot? If so, perhaps it has been deleted?
19:04:11.872 [iSync:275] ERROR (.sync.SyncConduitManager): Exception catch: [ISyncConcreteSession clientRefusedChangesForRecordWithIdentifier:]: I know nothing about a record with identifier 75E5A48B-BEA2-416F-9682-F4514CB7D85D. Are you sure you got it from this session or from the session's snapshot? If so, perhaps it has been deleted?
2007-03-27 19:04:13.720 iSync[275] we receive the end of our sync plan
Any idea what is wrong???
My phone was syncing perfectly fine prior to re-installation.
P.s. help,
Regards,
Bharat

did you ever manage to solve this problem ? same here, except that i was able to sync fine for a couple of months - the problem started mid december.

My apple 6th gen nano turns on but only has a bright light without images

my apple 6th gen nano turns on but only has a bright light without images

Hi fejevitzky,
Your question, "Based upon that, I believe you are telling me you do not think it is the BIOS--is that correct?" Yes, as long as you dont see any "white" light reveal from LCD bezel back side while with blank screen state. LCD bezel is the cover around LCD, most design put LED modeule at the bottom side next to LCD. While back light is not on during boot up sequence, that means system doesnt have chance to get BIOS program running. It also means, it stuck at state of hardware bring up. Normally motherboard related.
I quickly checked hp.com and found some link that may help. Or 1-800-HP invent (1-800-474-6836) can save times. This forum only intends to quick/simply reply users questions. About another service and repair charge, I have to give you other links to reach.
HP Partner and Store Locator: (I try to search your city, but doesnt work well. Suggest you call for quick response)
http://www8.hp.com/us/en/store-finder/index.do
Contact info:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Contact HP:
http://www8.hp.com/us/en/contact-hp/contact.html
HP SmartFirend Services: (I saw it with price of service)
https://h30617.www3.hp.com/HP/home/index.asp?jumpid=in_r11682_us/en/hho/pps/suppgateway_gi_ob_ds_pd/...
Thank you so much. If you think my reply helps your product, please help to close this case once you feel comfortable. And, click "KUDOS".
I work for HP.

My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

it's a hardware issue
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more here
iphone stuck in headset mode

I have an Iphone 6 with 16gbs, so I'm running out of room. When I go to settings, general, then about, it says I have 97 photos and 23 videos, but I have nothing in my video app and in the photos app only has 12 pictures and 1 video. Any clue what w

I have an Iphone 6 with 16gbs, so I'm running out of room. When I go to settings, general, then about, it says I have 97 photos and 23 videos, but I have nothing in my video app and in the photos app only has 12 pictures and 1 video. Any clue what would be causing this?

I have an Iphone 6 with 16gbs, so I'm running out of room. When I go to settings, general, then about, it says I have 97 photos and 23 videos, but I have nothing in my video app and in the photos app only has 12 pictures and 1 video. Any clue what would be causing this?

I baught a 32g i pod touch. but it only has 28.6g out of the box. what's up with that?

I baught a 32 GB ipod touch from best buy. I took it straigh out of the box and it only has 28.6 GB of available space. why is that. i baught a 32 gb not a 28gb! lol why do i only have 28.6 GB?

christopherfrommanhattan wrote:
I baught a 32 GB ipod touch from best buy. I took it straigh out of the box and it only has 28.6 GB of available space. why is that. i baught a 32 gb not a 28gb! lol why do i only have 28.6 GB?
See Here...
https://discussions.apple.com/message/12289884#12289884

The computer I use for Itunes only has XP so I can't use ICloud. My desktop has Vista so I can use it. But I don't want to lose all of what I have on my Iphone 4S and my two Ipads. How can I use the desktop and retain the apps, music, podcasts etc. I have

The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
I have a desktop that operates using with Vista.
I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
Isn't there a way to do this? Shift my library FROM my devices to the desktop?
Thanks

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

My apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. can't restore.

my apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. the only way to unfreeze it is by detatching the ipod or resetting with menu/centre (until it loads up again, where it immediately unfreezes and comes up with a load of messages saying "cannot read iPod" and when i try and restore it by pressing menu/centre button while it's plugged in, it says "cannot restore as it is being used by another program" or "error 1415". Any ideas how to sort this out? hope i haven't majorly screwed it up. thanks.

Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office. Is there a conversion program?

Hi!
Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office. Is there a conversion program?

Making changes to PDF file: Apple Support Communities
Have just noticed this in a thread today. The link from Klaus1's post may allow you to use PDF and work on it. I haven't tried it but it may give you some extra ammunition.

Brand new Mac, had to erase drive through disk utility as time machine back up failed. Now disk utility only has the option to install Mountain Lion which my Mac won't allow. Anyone any ideas as my Mac won't load anything up but disc utility!

Brand new Mac, had to erase drive through disk utility as time machine back up failed on initial setup, USB cable popped out Now can only access disk utility as won't load to log in screen. The only has the option in disc utility is to re-install Mountain Lion which my Mac won't allow or loading another time machine back up but after an hour of it processing, that didn't resolve the issue either! The time machine back up is the latest back up of my Mac Book Pro which was using OS X Maverix. I'm guessing I'm going to have to take my Mac to the store but that would be a hassle so does anyone have any ideas?

Follow this guide using another Mac.
Insert your newly created Mavericks USB into you Mac, press the power button and then hold down 'option,' until it gives you an option to boot from the USB. You will then be able to erase the internal disk with Disk Utility and reinstall Mavericks straight after.
After that you should be able to use Migration Assistant to restore your applications and user data.

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Time Capsule has green light, but unable to access the internet

My Time Capsule has a green light, but all devices (wired and wireless) are not allowed out to the internet.
When I connect my iMac directly to my internet router, I am able to access the internet, so I have isolated the issue to the Time Capsule.
The Time Capsule receives an IP address from my internet router via DHCP and I can see this address in the Time Capsule config, but for some reason the Time Capsule is not allowing internet access to both wired and wireless clients.
Thank you.
--SN124B

Verify that you have a working Ethernet cable.
Then verify that the Ethernet cable is connected from one of the LAN <-> ports on your main router to the WAN "O" port on the Time Capsule.
Check again to make sure that the Time Capsule is configured in Bridge Mode
Power cycle the entire network as follows:
Power off all devices in any order you want
Wait a few minutes
Start the modem or modem/router first and let it run a full minute by itself
Start the main router next the same way
Start the Time Capsule the same way
Continue starting devices one at a time until everything is powered back up
Check the network

Nokia 9300i outer lcd only has light but no displa...

Similar Messages

Maybe you are looking for