Nokia X6 Touch screen and Proximity Sensor

Hello!I have a problem.
When talking on the screen are activated any keys - the media, the button to turn off the microphone. Sometimes when you dial and put the phone to the ear he cut off talks. Proximity sensor works and the screen fades to where my ear. I do not know how to obtain it but it is very nasty. Version of software after the update is 30.0.003 but the problem remained. Please help!

Help me

Similar Messages

Nokia N8 touch Screen stop working..

first of all Thankyou for reading my post.
espicially to those who wanted to help me.
also before i post this problem i read lots of problems same as my phone problem.
main is Touch Screen wont work.
i did this.
8secs depressed the power botton. failed.
depressed volume down + camera + rare botton + power botton - failed.
i tried also to restore factory setting. but the code 00000 0000 or 12345 factory default code. wont work also.
guys if anyone knows how to fix my n8 touch screen.
and im using the mouse to navigate my phone.
please help me. the phone ages 21months.
before this problem happen. i installed an application called.
freeware LIE DETECTOR.
and after that it stop working..
any idea suggestion or fix solution is much appreciated.
im a loyal user of nokia since my phone back then is NOKIA 3210.
please help me sir/maam.
thankyou very much!

done updating.. this so called microsoft plugins configuration.
still touch screen is not working.. what should i do.. please help!
im not from EU sir.
im from philippines i bought this cellphone when i was in saudi arabia.
so that means warranty is not applicable to my location right now.
pressing power button 8secs and menu volume camera power it does reboot.
but after that still touch screen wont work.
is my phone broken?
by that application LIE DETECTOR?
that means i cant trust nokia applications at all.
i dont know what to do.

Nokia E6 touch screen problem

My E6 00 comes with symbian belle i bought it last month a week leter the touch screen stop functioning proper, i need to lock it and reopen it every minute for me to use the touch screen and even then its not all the part of the screen that is working like the option key, OK or cancel key, the drop down menu at the top of the screen which can be used to on/off the network connection. I've used *#7370# to format it twice but the problem still remain i regret buying the phone. please ! someone should help me on what to do i'm confuse

Have you checked that you have the latest firmware onn your device via the device itself or Nokia Suite? If there is an update offered, please update. If that doesn't work, try re-installing your current firmware through Nokia Suite. Failing that, perform a three finger hard reset, and if that doesn't work, then you will need to take your phone to your local Nokia Care point for them to inspect.
http://nokia.com/support

Light and Proximity sensors not working

Hello.
Recently, my Z10 hasdeveloped a very strange problem: light and proximity sensors would not work on the device. My Z10 no longer auto-dims the screen, and the screen stays on during calls. According to BBVE, light and proximity services are both listed as unavailable, and tests could not be carried out for them. Restarting the device seems to fix the problem temporarily. I am completely out of ideas what to do next, since this issue is very annoying. So far, I have tried:
Performed hard reset
Performed OS reload via BB Link
Used an autoloader to load developer OS
Did a battery pull
Did a security wipe
I spent a lot of time looking for a solution to this problem, and seems like it is relatively widespread issue - even affecting new devices like Passport. Any assitance would be greatly appreciated. Thank you.

Leslie8120 wrote:
Radishface wrote:
Hello.
Recently, my Z10 hasdeveloped a very strange problem: light and proximity sensors would not work on the device. My Z10 no longer auto-dims the screen, and the screen stays on during calls. According to BBVE, light and proximity services are both listed as unavailable, and tests could not be carried out for them. Restarting the device seems to fix the problem temporarily. I am completely out of ideas what to do next, since this issue is very annoying. So far, I have tried:
Performed hard reset
Performed OS reload via BB Link
Used an autoloader to load developer OS
Did a battery pull
Did a security wipe
I spent a lot of time looking for a solution to this problem, and seems like it is relatively widespread issue - even affecting new devices like Passport. Any assitance would be greatly appreciated. Thank you.
Did this problem occur suddenly or have you donwloaded any apps (android port) before the problem started ?
Hi there!
This problem occured suddenly, during normal operation. I don't have any Android apps installed. I even got the same issue right after I reloaded the OS and after the factory reset. Very strange.

JME support for touch screen and vibration

Hi all, How are you?
I need to develop a application for mobile phone, and it is going to use the mobile touch screen and vibration features.
Does somebody know if there is an JME API, or JSR that provides access/control to Mobile's touch screen and vibration features?
Does somebody know if it is feasible to do it using JME?
I appreciate any help you can give,
thanks in advance,
Roger

to use the mobile touch screen javax.microedition.lcdui.Canvas methods
-- hasPointerEvents()
-- hasPointerMotionEvents()
-- pointerDragged(int x, int y)
-- pointerPressed(int x, int y)
-- pointerReleased(int x, int y)
and vibration features?javax.microedition.lcdui.Display method
-- vibrate(int duration)
Also see proprietary vibration etc. APIs for Nokia / SonyEricsson:
{color:#0000ff}http://www.wmlscript.it/j2me/nokia-UI-API-v11/com/nokia/mid/ui/DeviceControl.html
http://developer.sonyericsson.com/entry.jspa?externalID=108&categoryID=12{color}
db

Z10 - Light and proximity Sensor not working

Hi,
unfortunately neither the light Sensor nor the Proximity Sensor are working on my device (Z10). I did reset my device to factory settings yesterday but without success. BBVE tells all sensor services are available and running but the Proximity and Light Sensor tests fail. I tried to reboot the phone but afterwards BBVE claims the Sensor Services to be not even running anymore.
My Phone is currently running on Version 10.2.1.2977.
Is this a software or hardware releated problem? And does there exist any fix to it?
Thanks for your help in advance.
Best regards.

Leslie8120 wrote:
Radishface wrote:
Hello.
Recently, my Z10 hasdeveloped a very strange problem: light and proximity sensors would not work on the device. My Z10 no longer auto-dims the screen, and the screen stays on during calls. According to BBVE, light and proximity services are both listed as unavailable, and tests could not be carried out for them. Restarting the device seems to fix the problem temporarily. I am completely out of ideas what to do next, since this issue is very annoying. So far, I have tried:
Performed hard reset
Performed OS reload via BB Link
Used an autoloader to load developer OS
Did a battery pull
Did a security wipe
I spent a lot of time looking for a solution to this problem, and seems like it is relatively widespread issue - even affecting new devices like Passport. Any assitance would be greatly appreciated. Thank you.
Did this problem occur suddenly or have you donwloaded any apps (android port) before the problem started ?
Hi there!
This problem occured suddenly, during normal operation. I don't have any Android apps installed. I even got the same issue right after I reloaded the OS and after the factory reset. Very strange.

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

Problems with Illustrator CC 2014 in Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen.

Hello to everybody!
Some times ago Adobe has updated Illustrator to CC 2014 version and now it support touch pressure\pan\zoom in Windows 8 tablets. I have Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen with pressure-sensitive support.
I was extremely disappointed that the brush in new version does not work correctly. Watch the video please that I did specifically for the demonstration.
I use Adobe Illustrator CS6 and Adobe Illustrator CC 2014 for comparison. In the old version the brush is works correctly. You must do a lot of clicks to start the brush in CC 2014 version (please see video). What causes of the problem? Please help me!

Hello to everybody!
Some times ago Adobe has updated Illustrator to CC 2014 version and now it support touch pressure\pan\zoom in Windows 8 tablets. I have Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen with pressure-sensitive support.
I was extremely disappointed that the brush in new version does not work correctly. Watch the video please that I did specifically for the demonstration.
I use Adobe Illustrator CS6 and Adobe Illustrator CC 2014 for comparison. In the old version the brush is works correctly. You must do a lot of clicks to start the brush in CC 2014 version (please see video). What causes of the problem? Please help me!

Nokia C6- Touch Screen is not responding

Hi
I have bought a nokia c6-00 few month back.. from last two-three day, the touch screen of this cell is not working properlly..Even i have restarred mobile many time..some time is working..but within the second again faceing the same problem...
Is any one faceed this type of problem. is this a software or hardware proble..
it is very disappointng me..
Please have any solution for same..
Regards
shtru

Hi Shtru,
I will suggest you try and calibrate the device first by using the keypad, the steps to do this are as follows:
Menu > Settings > Phone > Touch input > Touch screen calibration. Follow the instructions on the screen.
This should address your issue.
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

Nokia x6 touch screen

Yesterday I was to a party. I danced, in this time my phone was in my pocket and..there aren't any risk to damage my phone, but..when I got home, i have seen that my touch screen is broken and doesn't work. I want to know if touch screen doesn't work because of that, and if I must to change it. I'll put a picture and I hope you'll help me. Thanks
Attachments:
DSC00031.JPG ‏1840 KB

since the touch panel is broken and you can't operate the device, a visit to a Nokia Care point will help you.
please remember that since you broke it, the warranty will not cover the repair.
Greece Nokia X6 RM-559 v40.0.002

Nokia 300 touch screen problems

hi , i have bought this nokia 300 recently and after just three months its touch screen is malfunctioning, the proble is that if u touch the left side if the screen the effect is visiblle on a little right side, not that exact point which i want to click. e.g if i touch alarm , it open calender, need help

uvijay wrote:
Nokia 300 touch is not working.I understand Nokia touch is not working properly for many people . But unfortunately we bought two touch models of Nokia both not working.
Hi uvijay,
Welcome to the forum.
Have you done calibrating the touchscreens of the two devices? Also, check if soft reset will fix your problem. You can do a soft reset by dialing *#7780#. After that you'll be asked to enter a lock code. Just enter 12345 if have not changed it. You can also do the steps advised by @ng85 (message no. 4) above.

Nokia 5233 touch screen problems

Sometimes when someone calls me and I try to receive the call by pressing the touch screen button on my 5233, the button does not respond and I have to pick up the call by pressing the green button. Other times it works fine.
Since the problem is not regular when I visited the nokia service center they could not provide any solution.
Would you please suggest something.

I have the same problem with 5230...unlocking to attend the call by sliding does not work.
I have one more issue /t5/Nseries-Devices-and-S60/screen-pad-gets-locked-whenn-dialling-5230/td-p/652534

Windows 8 upgrade problems (touch screen and audio)

my　computer is HP touchsmart 600 1005xt and recently upgraded from windows 7 to windows 8 (64-bit)
after up grading I noticed that the touch screen does not work and and the speakers also did not work

HI,
Here are a few tips that might help you to get your touch screen working:
Activate Windows and install updates by pressing the Windows logo key + W. Type "Activate Windows" into the search field, and then click on the Activate Windows icon that appears in the upper left corner of the screen. In PC Settings, click on Activate Windows, wait for your computer to connect to Microsoft, and then follow the onscreen instructions. Restart the computer. Press the Windows logo key + X, and select Control Panel from the menu. In the upper right corner of Control Panel, select Large Icons from the View by drop down. Click Windows Update. Install touch and/or graphics driver updates. Restart the computer.
Another thing to try: Go to the HP Support and Drivers site and click Drivers and Software. In the search field, enter your product name or number, and then click Next. Select your operating system from the drop-down, and then click next. (If you don't know if your operating system is 32- or 64-bit, press the Windows logo + X key again and select System from the menu.) Follow the onscreen directions to install any appropriate drivers. Restart the computer.
If the touch still doesn't work, try this: Press press the Windows logo + X key, and select Device Manager from the menu. In Device Manager, click the little triangle next to Display Adapters to expand the list. Right-click on the graphics card and select Disable. When asked if you want to disable the card, click yes. Restart the computer. You may have to tinker with your screen resolution.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

Touch Screen and Charge Issue

Hey everyone, first time here but also registered at precentral
Asked there, but I'm hoping here would be a better place to voice this issue.
This is my 2nd New Pre I had as the first one had random keyboard loss when my phone died due to battery. I was able to fix it with a 5th batt pull, but I wasn't chancing it..so swiped it.
Well, got my phone with 1.2.x out of the box and tested fine at the store. When home and updated to 1.3.1. weeks later the issue.
touch would random stop working...I had preware so I decided maybe it was a patch or app messing it up (I noticed I didn't have message foward working after update)
So I Doctored it. The Process went nervously fine, up until I got to the home screen. The Touch went out again!
But after messing around a bit after getting it back after a battery pull (at the time touch comes and goes) I was easily able to recreate the issue.
For example:
Touch = dead, once I plug it into a charger (usb/wall), Touch returns.
Touch = alive, (after it came back during day) Once I Plug in to charge, Touch gone.
There was a point that touch wouldn't return if I had the phone slider closed, with screen unlocked. Wether I was plugging it in or removing to charger.
I hope this makes sense, and really hope its not hardware, as I don't wanna return phone to find out it repeats on a new/refurb one. As this one feels solid in every other dept.
Q's Did palm change how the phone locks..reacts to charger??
If so, god, please fix it!
Post relates to: Pre p100eww (Sprint)

ok, I left work today. in the elevator down to my car i started pandora, bluetooth. Got in the car, docked the phone, plugged in the aux wire to my radio, charger to the phone. Music, couple of calls, music agian, skipped some songs, changed pandora stations, etc...
Got home, undocked the phone, unplugged aux cable and charger, close pandora, turn off the light. Grab my stuff, phone rings can not answer it. Screen now does not work anymore.
Pull the battery twice, no luck. Do some searching and see some post that it is realated to the battery connection and a post that other have got it to work with the charger plugged in.
I take the USB cable, PC to phone and it starts working!! yeah... mess with that batter and no luck. stops working again. unplug the USB from the PC and it is still working. Uplug the USB from the phone, stops working, plug it back in to the phone, not the PC and the screen works again... not really sure what that is about. now it is working with no wire.

Speakerphone and Proximity sensor?

So I've had my iPhone 4 for a day or so now and have noticed the proximity sensor is much weaker compared to my 3G and you have to be pushing your head against the actual phone, it's not a huge problem it's just bugging me. Also when I have speakerphone turned on the mic does not work, This problem is only confined to speakerphone, the mic works in every other situation even speakerphone works skype. I'm guessing this is a software problem and not an actual hardware bug?

Joe Baynham wrote:
So I've had my iPhone 4 for a day or so now and have noticed the proximity sensor is much weaker compared to my 3G and you have to be pushing your head against the actual phone,
Don't know what the problem is but mine seems OK: Not one case of that in six days. The two other iPh4s in the family seem fine in all respects, too.
Phil

Nokia X6 Touch screen and Proximity Sensor

Similar Messages

Maybe you are looking for