Non-Valuatated materials Excise invoice cancellation

Hi,
Other Goods Receipts, 501 movement receipts excise invoices need to be revered, Can let me the process sets. As i have to capture same excise invoice number after reversing the same excise invoice that was captured in 501 mvt.
Thanks in advance
Regards
Mohan

hi
in J1IEX cancel the excise invoice using internal invoice no if u have not posted it
if u have posted it it then cancel the GR and again post the same invoice no with the rejection code in the misc. tab
u can get the same excise invoice no.
regards
kunal

Similar Messages

Country India Version Incoming Excise Invoice Cancellation

Hi Experts,
I am unable to cancel incoming excise invoice. I have gone through many threads regarding this subject but still none of the suggestion is working out here, please gives your valuable comments?
We are using TAXINJ procedure and I followed the below steps for excise cancellation.
1. Good Receipt for PO MB01
2. Capture and Post Excise Invoice ref to GR J1IEX
3. Cancel the Material document created in step1 MBST
4. Cancel the Excise Invoice created in step 2 J1IEX.
When I am trying to execute step 4 i am getting the error message Excise invoice EX140 2009 has already been posted for vendor 907970
When I try to post the excise invoice EX 140 it gives me error No Part I exists for availing credit in excise invoice EX140 2009.I tried to update part1 using J1I5,there I only found the material document created in step 3.
If I try to post the excise document with ref to the cancellation material doc and I use the same excise number i.e. EX140, it gives error Excise invoice EX140 2009 for the vendor 907970 Exists. I also tried with a dummy excise number EX141.i am able to capture excise with this number but when I try to post it gives me message No Part I exists for availing credit in excise invoice EX141 2009, Then I updated the part 1 using J1I5 and tried to post the document EX141, it gives a div by zero Dump.
Please help me out.
With Regards
Sarvesh Kumar Vashist

Hi,
Thanks for your valuable inputs.
I am still confused what standard SAP says regarding Incoming Excise Invoice cancellation, the comments are contradictory even I searched in other threads also but there also no standard answer.
does it allow the cancellation if Part2 is posted?
I followed the steps suggested by SAP Learner. But it does not allow me to do the step 3 it gives me messageu201D No Part I exists for availing credit in excise invoice XXXX 2009".I checked table J_1IPART1 and table J_1IPART2, the entries are there for excise invoice XXXX.
Please advice As per Indian Tax law is it OK if I post the difference amount using J1IH other adjustment. But if we have to post the -ve difference then how can book that amount. I extracted the registers it is showing the JV values but does not show any reference document.
With Regards
Sarvesh Kumar Vashist

Split valuation for non-valuated materials

Hi dudes,
We are implementing SAP for our Subcontractor.
our SC receive all components from our company ( on free ) but sometimes they purchase the same material themselves for other uses. so we decided to use split valuation to separate valuated and non-valuated materials.
I did configuration and created 2 valuation type ( valuated - nonvaluated )
when I create Purchase order it askes for valuation type but even when I use non-valuation type in PO it asks for price!!!!
do any of you have used split valuation for this target?
have the same problem?
what should I do actually??

Hi,
Is someone in the subcontracting plant going to do a process order on the materials you send them? Or are you only going to track the finished inventory once it reaches your plant?
In the first case:
1) Create a STO to the SC plant. This stock will have to be priced.
2) Inventory reaches SC plant. They perform production process.
3) finished inventory is sent using another STO.
2nd Case:
1) Create a SC vendor using the SC plant as a vendor.
2) Create a SC PO to this vendor using this vendor and transfer goods to him. In this case, goods are transferred for 'free' as they really belong to you and not to the SC
3) Once the production process is over and the finished product is sent back to you, do a GR. The raw material sent to the SC will be consumed.

Best Material Type for Handling Non-valuated Materials in Distribution

Our distribution business will soon be handling non-valuated material and I am trying to determine the best material type to use. I am considering material type UNBW but would like to know if anyone has advice. We are strictly providing a service to the vendor for handling these non-valuated materials (for example, wood products). We will not purchase or sell the product. Our service consists of receiving the product into inventory from the vendor, tracking the inventory, (in Warehouse Management) and then shipping the material to a customer of the vendor's choosing. For these non-valuating materials, we are paid strictly for our service of warehousing the material and shipping to a customer.
Up until now, our distribution business has distributed only valuated materials, i.e., materials we purchase at a price and sell at a price. We also use vendor consignment. NOTE: This is not a vendor consignment scenario because we never buy the product.
Here are our requirements:
- We don't own the non-valuated product.
- We need to be able to ship these new non-valuated products on the same shipments as the valuated product we own.
- We use handling unit and warehouse management for all of our finished goods.
- We would like to use our existing processes and HU/WM RF transactions to receive and pick the non-valuated product. This means:
1) Creating inbound deliveries and packing into HUs. And applying our HU bar code labels.
2) Physical inventory counts by HU.
3) Creating sales orders that have both the non-valuated materials and valuated materials we own.
4) Creating outbound deliveries and picking via transfer orders in WM.
5) Assigning the outbound deliveries to a shipment.
Questions:
1) Can a UNBW material that will be stocked but not valuated be received into inventory via a PO? Any way to receive into inventory with an inbound delivery without using a PO?
2) Are there any problems with putting a non-valuated material on a sales order with a zero price?
3) Any challenges that other have run into?
Thanks in advance.
Rob

I must be missing something regarding the use of material type UNBW. When I post the goods receipt for a PO with a UNBW material, no inventory is created. When I create the PO, an account assignment is required. I tried both a cost center account assignment (K) and balance sheet account assignment (Z - using a Profit Center). In both cases, I am forced to check the "Free item" checkbox to avoid entering a price; which also seems strange since the material is UNBW.
I have searched everywhere for a "Best Practice" for my scenario with little results. Again, we are simply managing the inventory for a vendor and shipping the inventory to our vendor's customers. So we are acting as a third pary warehouse and shipper for the vendor. We do not buy or sell the inventory - we are paid a monthly service fee by the vendor for warehousing their product and shipping it to their customers. We may ship the product on sales order deliiveries that include both the "non-valuated" product (i.e., free goods we manage for this vendor) and goods that we actually own.
As an alternative, I am wondering if I should look into somehow using vendor consignment with a settlement price (consignment info record price) of zero. Vendor consignment is nice because you can track the stock by vendor. However, we would never truly "settle" with the vendor because we would not be paying the vendor for the inventory and would never own it.
Our business refers to this as "reload business" but I am not sure this is an industry standard term.
Any other thoughts out there?

GRN of Non Valuated Materials

Hello Experts,
Please explain me the inventory management of Non Valuated Materials.
How the GRN of such materials is done.
What are the documents generated for goods movement related to non valuated materials.
Regards,
MM

Dear,
Please explain me the inventory management of Non Valuated Materials.
Non-valuated materials are managed on a quantity basis, but not by value
How the GRN of such materials is done.
GRN of these materials will be done in normal way with mvt 101, only difference will be there won't be any accounting document generated at the time of GRN.
What are the documents generated for goods movement related to non valuated materials.
Once you do GRN for Non Valuated Materials then there will be only material document created, there won't be any accounting document generated.
Hope it helps.
Utsav

Transfer of non-valuated materials from ECC to SRM

I kindly request your help with an issue that I am facing.
The scenario is as follows :
1. There is a non valuated material X (material type UNBW).
2. MRP run happens and generates a PR with account assignment U.
3. Transfer report BBP_EXTREQ_TRANSFER is executed in order to transfer the PR to SRM.
4. The PR reaches SRM, but the SC is not created instead in SLG1 there is an error thrown, "No account assignment exist. Enter an account assignment".
5. In the backend now If I try to change the PR i get the error " 6Q204 (Procurement profile 36 cannot be changed).
Is this scenario supported ?? i,e, transfer of non-valuated materials from ECC to SRM.
Kindly let me know if you have any idea on this.

Hi,
As per your query you have not determind accounts assignment. Please do these activity.
Please see the below link.
http://help.sap.com/saphelp_srm30/helpdata/en/a9/cde93a2876a81ae10000000a11402f/content.htm
Regards,
Anil

Restrict issue of non valuated materials

dear experts,
Is there any way to restrict issue of non valuated materials against a production order.
Regards,
krishna mohan

sir ,
After discussing with u about the issue again i discussed with my pm and got the exact requirement,
what exactly he want is the price of the material is 0 zero , it should not be allowed to be issued against a production order.
please tell me if we can do with configuration which is the best way or else we have to use any exit.
if we use exit we will check in MBEW table and field verpr, if the verpr field value is 0 zero then we will not allow else we allow the material to be issued.
regards
krishna mohan

Control Excise invoice cancellation

Hi All
Our Business process is Proforma invoice -
Excise invoice -
Commercial invoice (Pass to accounting )
Problem - After generating Commercial invoice system is allowing to cancel Excise invoice through J1IH or J1IIN with out checking commercial invoice ..
We need the system to check Commercial invoice at the time of cancelling Excise invoice .
Is there any user exit or Badi to control the Cancellation of Excise invoice if commercial invoice exists

Dear Marathanda,
CIN is not a statdard SAP offering, It has been built for India requirements and that is the reason why excise Invoice doesn't show up in the document flow..like SO, Del, Invoice..which gets updated in Table VBFA. and that is the reason why there is no check at Excise Invoice cancellation level that if commercial Invoice exists then cancellation should not be allowed. there is one more factor for that, in many business scenarios we are creating Excise Invoice after the commercial Invoice and in many we are creating after delivery..say at the time of despatch of goods from factory premises or Stock Transfer Order so it's a tricky situation.
In your case, the commercial invoice is getting generated after the Excise Invoice i.e.with Excise Invoice is getting generated with ref to the pro forma Invoice and then you want to restrict the cancellation of the Excise Invoice then first you need to check the Internal Number created at the time of Excise invoice, that number will give you the billing reference number (of pro forma Invoice). now from that billing document (pro forma Invoice) check in table VBFA , enter that precceding document number and and item number along with subseqent document number catagory as "M" It will give you the Commercial Invoice Number. you can put your restriction there.
Thanks,
N

CIN Version - Excise Invoice Cancellation.

Dear All,
During billing document cancellation (by VF11) the excise invoice gets automatically cancelled. But my client doesn't want the automatic excise invoice cancellation. They wants to cancel the excise invoice only mannually (by J1IH).
SAP Version is ECC 5.0
Kindly let me know if you have any suggestions.
Thanks & with best regards,
S. Raju
[email protected]

Dear Raju,
Please Check the bellow.
SAP Note Number 551932 - Cancellation of Billing with Excise invoice
Note Language: English Version: 2 Validity: Valid from 05.09.2002
Summary
Symptom
When a billing document is cancelled, the attached excise invoice also gets
reversed. Again the user can go and cancel the excise invoice independently
through CIN making double accounting of the reversal.
More Terms
Excise invoice, Cancellation of excise invoice, j1iH, VF11
Cause and Prerequisites
This is because of the new cancellation procedure of the billing.
This happens because the accounting document for Excise invoice posting is
linked to the document flow of SD. So when you cancel the billing all the
related accounting documents are reversed.
Solution
This is because of the new Billing cancellation procedure. You have to
implement the userexit mentioned in note 339928. This will ensure that the
cancellation of excise invoice works as it used to do before the new
cancellation procedure.
In the userexit userexit_fll_xkomk1 in function rv_accounting_document
create add the code attached below. The userexit is in rv60bfza. This will
not get overwritten in upgrades.
FORM USEREXIT_FILL_XKOMK1.
rule_new_cancel = 'A'.
ENDFORM.
This will ensure that excise invoice related accounting document is not
reversed at the time of billing. You may use the existing functionality to
cancel the excise invoice
Header Data
Release Status: Released for Customer
Released on: 05.09.2002 07:35:33
Priority: Correction with high priority
Category: Consulting
Main Component XX-CSC-IN-SD Sales and Distribution
Additional Components:
SD-BIL Billing
Valid Releases
20.04.2007 Page 2 of 2
SAP Note Number 551932 - Cancellation of Billing with Excise invoice
Software Component Release From
Release
To Release and Later
SAP_APPL 46 46B 46B
SAP_APPL 46C 46C 46C
SAP_APPL 470 470 470
CIN 3.0 30A 30A
CIN 4.0 40A 40A
Support Packages
Support Packages Release Package Name
SAP_APPL 500 SAPKH50015
SAP_APPL 600 SAPKH60008
Related Notes
Number Short Text
339928 New cancellation procedure cannot be deactivated
Attributes
Attribute Value
weitere Komponenten SD-BIL
Regards
MBS

Non-valuated materials

Hi,
We have non-valuated materials in master data. We are using account assignment category K (Gl account and cost center purchase) while creating PO for non-valuated material. Hence, the material should get consumed at the time of GR. But we are observing that the material's qty. gets accumulated in unrestricted stock instead of getting consumed at the time of GR.
If we issue the material again using MB1A then issued qty gets deducted from unrestricted store.
Kindly explain.
With Best Regards,
Rajkumar

Hi Rajkumar,
The system is working fine in this case. Please, note the following:
1) If the material is set to make value and quantity update and it is included in a Purchase Order with account assignment, a goods receipt will increase the consumption.
2) If the material is set to quantity update but no value update and it is included in a Purchase Order with account assignment, a goods receipt will increase the stock.
The reason is the following one:
In the case 2) the account assignment is mandatory when the purchase order is created.
In the case 1) the account assignment is not mandatory. We enter the account assignment as we need, but it is not compulsory. Therefore, in this case, the presence of account assignment is used to decide whether the goods are posted to consumption or to stock:
- If there is account assignment the goods go to consumption.
- If there is not account assignment the goods go to stock.
In the case 2) this logic cannot be used, because the account assignment is mandatory, so the system "does not know" if you want to post the material to consumption or to stock.
In this case 2) the material always goes to stock.
If then the material is to be consumed you can do your consumption posting for a non-valuated material just as you mention: with MB1A and the movement type 201 for example.
I hope this information helps!
Best regards,
Esther.

During Excise Invoice Cancellation Posting Date should be similar to excise

Dear All Experts,
Hope you are doing well !
We have one requirement during Excise Invoice cancellation for Posting Date Field. Generally, system is taking Posting Date as Current Date but we want system should take Posting date as (Posting Date of Excise Invoice).
Please give your expert comments.
With Best Regards,
Bharat B

Dear Bharat,
Please use any exits given by me in the following thread and write the logic to populate the Excise invoice date as the cancellation date.
Excise Invoice Cancellation on Date validation only
Check and revert back.
Thanks & Regards,
Hegal K Charles

Non-Valuated Materials Purchasing Process

Hi,
Can some one please explain step by stem the process of purchasing for non-valuated materials. From PR to PO e.g. Account Assignments etc the whole works. If any one has any documents or screenshots that would be greate to just email them to me.
1)When Creating a requsition it asks for an Account Assignment why?
2)It also asks for a valuation price it doesn't accept 0 why? This is a non-valuated material and free?
I am having problems as I have approval levels setup via classifications for all indirect purchasing from account assignment K if for all non-valuated materials I have to create reqs via account assignment K they will require approvals. I don't want that.
please help points will be awarded
thanks
ADeel

U NEED To create the material master with unbw or nlag material type
> create pr
mention the material code and in the valuation field u can put the price of material for internal valuation
mention the account assign. categ. K
now the question is that you do not want to make use of the aac K THEN LET ME TELL U ONE THING
for those material types having no quantity/ value updation it is must that u mention the account assignement category
becuase if u r procuring the material but not storing it then it means u r directly consuming the goods at gr hence u need to tell the system where has the goods gone after gr ............and u r doing this via AAcategory
--->po
if u wan to recive free of cost goods then u need to mark the check box in po in front of your line item ...........

POS for non valuated materials

Now I am creating POS for non valuated materials. But system is asking Price for Non Valuated Materials. Please tell me how can create POS with our price for Non valuated Materials.

Hi,
Are you purcahsing non valuated material (UNBW material type) for free.If not keep a price in PO ( with account assignment category K)& do GR (where it will hit expense acoount & GR/IR account) &then IR.
For more check OSS Note: 456691
Regards,
Biju K

Excise invoice cancellation error

dera gurus ,
i had problem with excise invoice cancellation.
the problem is
outgoing excise invoice created by j1iin cancellation is giving error.
actur error showing in system is "excise modvat not defined for ceiv transaction and excise group".
please guide me what is short in customisation
regards
kris

Go to SPRO-->Logistics General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction.
Assign the appropriate GL accounts for the CEIV transaction and Excise Group Combination.
Regards,
Elanchezhian. K.C.

DIFFERENCE BETWEEN NON-STOCK AND NON-VALUATED MATERIALS

HI ALL,
I WANT TO KNOW WHAT IS THE DIFFERENCE BETWEEN NON-STOCK AND NON-VALUATED MATERIALS. WHY THESE TYPE OF MATERIALS ARE COMING UNDER COST CENTER AND WHEN CREATING PO FOR THIS TYPE PARTICULAR MATERIALS WHY WE ARE NOT MAINTAINING PRICE, MEANS WHY WE ARE DEFINING THE PRICE FOR THIS PARTICULAR MATERIALS?

Hi,
Hi,
non-valuated material (Material Type UNBW):
This type of material is managed on a quantity basis, but not on a value basis. This makes sense for materials of low value, stocks of which nevertheless have to be monitored (for example, operating manuals).
Non-stock material (NLAG) (Material Type NLAG):
Inventory management is not possible for these materials either on a quantity or value basis. For frequently required consumables, the use of this material type nevertheless enables you to store the information required to create
purchasing documents (such as texts and units of measure).
When a material is procured directly for consumption, no material master record is necessary. In connection with consumable materials, you can distinguish between the following cases:
Consumable material without material master record
Consumable material with material master record that is not subject to
inventory management (on either a quantity or value basis)
Consumable material with material master record that is subject to inventory management on a quantity, but not a value, basis
pherasath

Non-Valuatated materials Excise invoice cancellation

Similar Messages

Maybe you are looking for