Not able to access content for Mobile course
Hi Team,
I am trying to access content available for open SAP course for mobile Course: Introduction to Mobile Solution Development for the Enterprise
But once i click on a Video link, it directs me to this below page. Also not able to view any PDF.
Obviously, not even able to download.
Not sure if this is the right place to raise this question. So mentioning SCN Support
Regards,
JK
PS: I was able to view and download the contents before 12 hours.
Hi Jitendra,
The hosting server for pdf's is not working at the moment and the server technical team is currently working on the issue.
You can still stream the videos but this might not be suitable for you at this time.
Apologies for any inconvenience caused. The technical team have advised us that this issue will be resolved shortly so please check back later.
Kind regards,
Claire
Similar Messages
-
After recent upgrade not able to access content preferences
what ever the last options button you click, that information stays visible when you click on content. i'm not able to access the content portion of that set of controls.
running WINDOWSStart Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
SCCM 2012 software distribution not able to distribute content for chrome
Hi I am using sccm 2012, need some advice, thanks! I tried to deploy chrome exe to a xp pc but the PC software centre shows downloading for very long time, more than a few hours. I created a 64bit chrome for a win7 pc and deployment also not working, it
just failed. Then I downloaded a msi installer to deploy to an xp pc, the downloading also takes forever, I checked the distribution content, it's failed. I then created a DP group and add the single DP into it. but still not working. I did the work before
for firefox and it did work before. Not sure what happened. Not sure where to check the log for software distribution, any advice please?thanks!
Thanks and best regards, -- KFThanks, Narcoticoo!your advice is helpful!
So, does it mean I can use xxxx.exe /install /silent for all other exe installers? And to find out the detection method, do I have to install the exe on a local pc to find out the actual directory it will install it (Then uninstall it)? and xxx.exe /uninstall
is for uninstallation? Can I create a bat file like chrome-install.bat to have one line like "ChromeSetupStandAloneSetup.exe
/silent /install " as the the actual installer? Why there is a package option below application? it confused me ....
Thanks!
Thanks and best regards, -- KF -
Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers
Hi All,
Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
Following is the error we are getting :
"Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
I checked in the event logs , following was the exception :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Also, there was a microsoft OS security patching on our farm servers post which the error starts coming . Following were the patches that were installed
1. MS14-005
KB2916036 Security Update for Windows Server 2008 R2 x64
Edition (KB2916036)
MS14-009
KB2898857 Security Update for Microsoft .NET Framework 3.5.1
2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2898857)
3. MS14-009
KB2901112 Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2901112)
4. MS14-009
KB2911501 Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2911501)
5. MS14-011
KB2909210 Security Update for Windows Server 2008 R2 x64
Edition (KB2909210)
6. MS14-012
KB2925418 Cumulative Security Update for Internet Explorer 8
for Windows Server 2008 R2 x64 Edition (KB2925418)
7. MS14-015
KB2930275 Security Update for Windows Server 2008 R2 x64
Edition (KB2930275)
8. MS14-016
KB2923392 Security Update for Windows Server 2008 R2 x64
Edition (KB2923392)
Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
Any help would be much appreciated .
Thanks
Saquib KhanWe have found below error related in ULS as well as event viewer both :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Saquib Khan -
I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
If I create separate Apple IDs for my children, will they still be able to access content I have purchased on their iPhones and iPads?
I happened to stop at the Apple store yesterday for a separate issue and had a discussion about iCloud. Seems like this is how iCloud works (also, there's another thread on this forum that explains it well).
Each member of the family can have their own iCloud ID, which will be used for Mail, Calendar, Contacts, Apps, Bookmarks, Media, Photos, etc. and having this content synced automatically with a Mac (computer). The iCloud IDs work in tandem with the associated Apple ID — so while you cannot have multiple Apple IDs, you can certainly have multiple iCloud IDs tagged with a certain Apple ID.
While all this makes sense from the iOS device standpoint, I'm unclear on how things will sync with a Mac computer, especially if the family uses a single iMac with multiple login IDs for various members. For instance, I currently have an iMac and iTunes content resides in my Public folder, which my wife can still access when she logs in with her login ID. I'm guessing that I'll be able to set up her iCloud ID using her login, set up my iCloud ID using my login, while both our iMac logins will retain the same Apple ID. This would take care of syncing Photos, Contacts, Calendars, etc.
Another (not sure if unique) problem I face is our Address Book — right now, we have one GIANT address book with different groups set up. Certain groups sync to her iPhone, while others to mine. Some contacts are common between both of us. I'm hoping that if she/I updates a common contact, then the change will be reflected in both our groups of contacts. I hope this makes sense — for instance, I update a contact named Joe, and he's on my group of contacts in my iPhone. Hope iCloud updates the master contact card for Joe on the iMac, which would then automatically trigger the update on my wife's group of contacts—that Joe also belongs to— leading to an update on her iOS device as well.
Apologies for the lengthy response.. -
I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?
"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea. -
I am trying to purch music on iTunes but for whatever reason it keeps prompting to upgrade to iTunes10. so when i download I am still not able to access iTunes store to purchase music
Thank you so much. I would never have found it on my own. And, best of all--it works great!!!
Again, thank you, thank you.
best,
gt -
iPod Classic 80GB. Message reads ' iTunes library cannot be saved you do not have enough access privileges for this operation'. It says it has synced but it hasn't. Please help, I am not very tech minded.
See this article about troubleshooting the error message regarding access privelages. It may be preventing your iTunes library from being able to save/retain music you have recently imported to it, which may explain why no new content is being added to your device.
Trouble adding music to iTunes library or importing audio CD
B-rock -
Not able to access the Sql in Client
Hi
I have installed sql 2005 and sap 2007b in client server. It was installed succesfully but i am not able to access in client machine.
While installing sql whether we have to give " Network service ?? " instead of that i have give " Local system" so i think it was not allowing to acces the server in network in client Pc.???..
Now without uninstalling the sql and sap we can change the setting to access in the netwrk client Pc??? or i have to uninstall all then again ihave to install with " network service"
Pls Guide me.
GiriHi Giri,
In SQL Server Help file content are i pasted here
Using the Local Service Account
The Local Service account is a special, built-in account that is similar to an authenticated user account.
The Local Service account has the same level of access to resources and objects
as members of the Users group. This limited access helps safeguard your system
if individual services or processes are compromised. Services that run as the Local
Service account access network resources as a null session with no credentials.
Using the Network Service Account
The Network Service account is a special, built-in account that is similar to an authenticated
user account. The Network Service account has the same level of access to resources and
objects as members of the Users group. Services that run as the Network Service account
access network resources using the credentials of the computer account.
Important:
Microsoft recommends that you do not use the Network Service account for the SQL Server
or SQL Server Agent services. Local User or Domain User accounts are more appropriate
for these SQL services.
Using the Local System Account
The Local System account is a highly privileged account; use caution when assigning
Local System permissions to SQL Server service accounts.
Security Note:
To increase the security of your SQL Server installation, run SQL Server services under
a local Windows account with the lowest possible privileges.
Regards
Jambulingam.P -
BlackBerry Curve 9320 not able to access BlackBerry App World
Hi All,
I am new to Using BlackBerry.I have got a BlackBery Curve 9320 also as it requires 3G Net Connection for accessing internet i have put Vodafone's 3G internet pack as my network provider is Vodafone.But still i am not able to access my BlackBerry App World and many other stuff.But when i connect to my friend's mobile internet with Wifi i am able to access BlackBerry App word.Also when i try to access BlackBerry App it says " we cannot connect you to Blackberry App World.Please ensure that your devide is connected to the wireless network and try again"
Please Help and Guide...
Have a Rocking Day ahead!
Thanks and Regards,
Sushma Ramakrishnan Iyer (PS No. 298028),
SalesForce.Com Team,
HiCE Business Unit,
Old Building - Block 1,
Plot No.EL - 200 | TTC Electronic Zone,Shil - Mahape Road,
Mumbai - 400710.
Mobile : +91 96 6515 6328 | Work : +91 22 6795 4111
E-mail id : [email protected]Hello Sushu
Welcome to BlackBerry Support Forums
If you want to access most BlackBerry Application over your Mobile Network then a normal 3G data plan will not allow us, for that you have to activate BIS / BlackBerry Data Plan from our Carrier . However currently many application may work over a WiFi network .
So if you want to use those applications over your Carrier Network then call Vodafone and activate BIS on your account.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Not able to access Site logo from layout and css After removing all the permission from site
Hi Techis,
I have stucked here, actually I have removed permissions from all the users from the site and after sometime I got the mails from client that they are not able to access the Site logo and css in the site.
When I logged from Farm account and checked I can see everything working fine.Also the masterpage and all are checked in
I am not getting whats the exact issue.I stucked here from last one day Please help me to solve this issue.
Thanks Regards,
SimanchalHello,
Is it the publishing site? If so then go to site permission and provide permission to "NT AUTHORITY\authenticated users" to "Style Resource Readers" group.
You also need to make sure that "style library" is inheriting permission from parent otherwise you need to give at least read permission to library for all users. To verify this, just open view all site content page-->then click on style library,then
check permission.
Let us know your result
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Why i am not able to connect my apple mobile 4s to apple mobile 5 via bluetooth ?
Dear sir
Pls advise why i am not able to connect my apple mobile 4S to apple mobile 5 via bluetooth.
Or pls advise how i can tranfer music & movies from one apple phone to other.
Regards
PradeepHello shreejith786
The iPhone does not transfer music and videos via Bluetooth. To move content from one iPhone to another, you will need iTunes or iCloud handle that. If you have purchased content from the iTunes Store, you can download them directly. The articles below will assist with getting your media to your other iPhone.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L
Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
(97189) -
Users are not able to access two different SAP portals at a time
Hi Experts,
Users are not able to access two different SAP portals at a time, if users login the OLD SAP Portal then they are not able to access NEW SAP Production Portal asking user id's & Password while doing ECC & APO transactions.
If user clear the Internet Explorer cache then for time being they can access but its not the permanant solution.
Can any one please help me on this.
Thanks,
JayHello Jay,
here we are facing this problem, this company users not able to access both the portals at at time
If you want to access HTC and Armed at the same time you gotta complete SSO Config or User mapping between these two Portals. You can refer to the below link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/f8/3b514ca29011d5bdeb006094191908/content.htm
Thanks
SM
Maybe you are looking for
-
Problem in creation of User while validating accountId
Hi all, Im creating an accountId based on the Firstname and Lastname of an employee in a form. A rule has been written for the creation of accountid based on the combination of First & Last names, which is placed in the Expansion tag of the accountId
-
When I use airplay to watch hbo go through Apple TV it starts running. However for no apparent reason it will suddenly stop and the error message that I need hdcp something comes on and then I cannot continue watching it. It is so random happening af
-
Multiple supplier with single PO ( Non Excise )
Dear Experts, As per one item which is non Excise we make one po with a XYZ Vendor and all payment to be gone XYZ. but this suppling the same material from more others vendors ( goods supplier) how I map the same in MM becuase with parter function on
-
Hi Experts: I have 2 B2B systems (systemA and systemB) setup, where I send a 4C1 (Inventory Report) from SystemA to SystemB using ResettaNet protocol. To systemB, it is an inbound 4C1 message. In SystemB, I have configure 4C1 operational capability f
-
How to open dvd on iMac. will not open
I am not able to play a dvd on my imac. please help.