Not able to create a universe when using nav. att. 0MATL_TYPE in the query
Dear experts,
A few days ago I posted a message in the BO General Category due to this error and I was adviced to install SP19 in BW (3.5). We've allready installed it but the issue is still arising. I am posting this thread now in this category since maybe the other category was too general and this one a little bit more specified.
The error we are having is the following:
We are having an issue when trying to create a universe over a BEx query which uses navigational attribute 0MATL_TYPE of 0MATERIAL (0MATERIAL__0MATL_TYPE).
No matter where do we insert this nav. attribute in the query (lines, columns, free characteristics...) that we are not able to create the universe. We receive a message when trying to create it such as "error without message"
We have other navigational attributes from several characteristics which are not giving us any problems in universes, just nav attributes 0MATL_TYPE and a Z characteristic (ZMATPR) which is the same as 0MATL_TYPE (it is defined the same way, not related).
We are working with:
BW 3.5 - SP19, BEx 3.x
BOBJ XI 3.0 (without service pack or fix pack)
Does any one have any clue on what could be the reason for this issue??
Thanks in advance for your interest!
Best regards!!!!
Cecilia
Hello Ingo,
First of all thanks for your help, since we are really concerned about this issue.
We have been analysing the file you have talked us about. The thing is that a week and a half ago we had to write an OSS message to SAP concerning another issue, and we were recommended to install note 1260004 which involves editing the registry in order to show SOFA logs, and if we have understood correcty, the file you have given us modifies as well the server registry in order to show sofa logs.
Does the file you have given us includes new information in the SOFA logs, what is the difference between what we have changed with the SAP note and what you have given us?
Nevertheless, we have retrieved two logs from two executions (having navigational attribute 0MATL_TYPE in the query from which we want to create the universe) in case you could help us to interpret the informations given since we are not able to understand it. (You can seen them below my signature.....haven't find a way to attach files....sorry....)
Thank's very much in advance for your help!!!! This is so disconcerting.......
Best regards!
No way , I cannot copy the logs since the message format is destroyed when I copy it..... If you need it please inform me and we will send it to you!
Thanks again for the help!!!
Cecilia
Edited by: Cecilia Guerra on May 11, 2009 1:56 PM
Edited by: Cecilia Guerra on May 11, 2009 2:09 PM
Similar Messages
-
DEEMED INVOICE : Not able to create deemed invoice when the excise invoice
Hi guys,
when i create an excise invoice in background .and try to create ARE-3 in J1IA301.I am getting a error (081091004/2009 excise invoice is meant for normal invoice).
when i create excise invoice manually and click on goto - utilization . The excise invoice type will be local .If i click on the pencil tab it will change to EXPORT and we can see DEEMED in blue color after this i will save and create ARE-3. ARE-3 gets generated.
while creating excise invoice in background the EXCISE INVOICE TYPE in J1IIN will be LOCAL and we will not be able to change after this when i try to create ARE - 3 IAM GETTINGTHE ERROR..
Please help me out of this..
As my client wants to create the excise invoice in background while billing document is created..
Regards,
Shivdeep BHi
Maintain the default excise group and series groups and here select the deemed export and try
maintain as D in export type as DEEMED
regards -
Not able to create a database link using the database gateway of oracle 11g
HI,
While trying to create a database link to SQL server from Oracle ,using the database gateway provided with 11g, i am getting the following error while making use of it in selecting columns from tables :
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
These are the steps i have followed for setting up:
1.Ran the set up for the Database gateway.and mentioned the SQL server name and database .ALos set up a listener.
2. Added the following in the Listener.ora of Oraclehome 11/NETWORK/ADMIN:
LISTENER_SQL_FCD =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost) (PORT = 1541)
SID_LIST_LISTENER_SQL_FCD =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME= D:\app\20537\product\11.1.0\db_3)
(PROGRAM=dg4msql)
3.Added the following in tnsnames.ora inOracle home/NETWORK/ADMIN:
dg4msql=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1541))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
4. Following is the entry in initdg4msql.ora in C:\product\11.1.0\tg_5\dg4msql\admin:
HS_FDS_CONNECT_INFO=10.148.45.242:1433//SalesDemo
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
5. Created the database link :
create database link dblink
connect to "sa" identified by "<pswd>"
using 'dg4msql'
On running :select * from test1@dblink i get the following error:
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
Is there any issue with the set or definition that I get the above error?What is the version of the Oracle database in which you have specified/and use the database link?
If it is for example 10.2.0.3.0 you need to apply the mandatory patch for RDBMS bug 5965763 first before being able to use an 11g gateway. Have a look at MetaLink note 457808.1 for details about this patch.
Regards,
Ed -
Not able to read/write Clobdomain when using weblogic server.
Hi,
We have a view and one of its attribute is ClobDomain. Earliar we were using OC4J and had no problems in reading/writing this attribute using the entity object. Now we have migrated to Weblogic and the same clobdoamin is written empty. Also two records are inserted in the database. I thought it might be jdbc driver problem and tried to use ojdbc6 driver instead of default driver which is used by Weblogic. But still the same problem
We are using,
Jdev version- 10.1.3.4
Weblogic 10.3
I did lots of google but not find any solution.
Below is the error we are getting.
oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Insert": SQL Statement "null".
at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:5892)
at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5747)
at com.sungard.entegrate.bc4j.base.BaseEntityImpl.doDML(BaseEntityImpl.java:230)
at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4542)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3000)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2811)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1975)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2177)
at com.sungard.entegrate.bc4j.base.EntDBTransactionImpl2.commit(EntDBTransactionImpl2.java:130)
at com.sungard.entegrate.bc4j.com.opr.UserJclientFormSettingsModuleImpl.saveSetting(UserJclientFormSettingsModuleImpl.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.dispatchMethod(AbstractRemoteApplicationModuleImpl.java:6279)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.executeMethod(AbstractRemoteApplicationModuleImpl.java:6503)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgRequest(AbstractRemoteApplicationModuleImpl.java:4744)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgEntries(AbstractRemoteApplicationModuleImpl.java:4995)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readServiceMessage(AbstractRemoteApplicationModuleImpl.java:4176)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2255)
at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7551)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
at oracle.jbo.server.remote.ejb.NestedApplicationModuleImpl.doMessage(NestedApplicationModuleImpl.java:34)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.dispatchMethod(AbstractRemoteApplicationModuleImpl.java:6279)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.executeMethod(AbstractRemoteApplicationModuleImpl.java:6503)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgRequest(AbstractRemoteApplicationModuleImpl.java:4744)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgEntries(AbstractRemoteApplicationModuleImpl.java:4995)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readServiceMessage(AbstractRemoteApplicationModuleImpl.java:4176)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2255)
at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7551)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
at oracle.jbo.server.remote.ejb.ServerApplicationModuleImpl.doMessage(ServerApplicationModuleImpl.java:79)
at oracle.jbo.server.ejb.SessionBeanImpl.doMessage(SessionBeanImpl.java:477)
at com.sungard.entegrate.etm.bc4j.base.system.server.ejb.beanmanaged.ContactsModuleBMBean_cm55ac_EOImpl.doMessage(ContactsModuleBMBean_cm55ac_EOImpl.java:69)
at com.sungard.entegrate.etm.bc4j.base.system.server.ejb.beanmanaged.ContactsModuleBMBean_cm55ac_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
## Detail 0 ##
java.lang.NullPointerException
at oracle.jbo.domain.ClobDomain.writeCharsToLob(ClobDomain.java:1219)
at oracle.jbo.domain.ClobDomain.saveToDatabase(ClobDomain.java:364)
at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:5867)
at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5747)
at com.sungard.entegrate.bc4j.base.BaseEntityImpl.doDML(BaseEntityImpl.java:230)
at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4542)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3000)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2811)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1975)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2177)
at com.sungard.entegrate.bc4j.base.EntDBTransactionImpl2.commit(EntDBTransactionImpl2.java:130)
at com.sungard.entegrate.bc4j.com.opr.UserJclientFormSettingsModuleImpl.saveSetting(UserJclientFormSettingsModuleImpl.java:238)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.dispatchMethod(AbstractRemoteApplicationModuleImpl.java:6279)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.executeMethod(AbstractRemoteApplicationModuleImpl.java:6503)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgRequest(AbstractRemoteApplicationModuleImpl.java:4744)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgEntries(AbstractRemoteApplicationModuleImpl.java:4995)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readServiceMessage(AbstractRemoteApplicationModuleImpl.java:4176)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2255)
at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7551)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
at oracle.jbo.server.remote.ejb.NestedApplicationModuleImpl.doMessage(NestedApplicationModuleImpl.java:34)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.dispatchMethod(AbstractRemoteApplicationModuleImpl.java:6279)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.executeMethod(AbstractRemoteApplicationModuleImpl.java:6503)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgRequest(AbstractRemoteApplicationModuleImpl.java:4744)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgEntries(AbstractRemoteApplicationModuleImpl.java:4995)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readServiceMessage(AbstractRemoteApplicationModuleImpl.java:4176)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2255)
at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7551)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
at oracle.jbo.server.remote.ejb.ServerApplicationModuleImpl.doMessage(ServerApplicationModuleImpl.java:79)
at oracle.jbo.server.ejb.SessionBeanImpl.doMessage(SessionBeanImpl.java:477)
at com.sungard.entegrate.etm.bc4j.base.system.server.ejb.beanmanaged.ContactsModuleBMBean_cm55ac_EOImpl.doMessage(ContactsModuleBMBean_cm55ac_EOImpl.java:69)
at com.sungard.entegrate.etm.bc4j.base.system.server.ejb.beanmanaged.ContactsModuleBMBean_cm55ac_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please help.On line 37 of your server code don't use available.
-
Qosmio X770: Not able to create 3D pictures/videos using Web Camera 3D V1
I am unable to record 3D images or video with the integrated Toshiba Web Camera 3D V1 on my X770 11C 3D laptop !
The 2D recording is normal.
Have I to install additional softwares for 3D recording?
Message was edited by: jacques.vskDear MASTERG
I didn't find the program or application to test the webcam .
I found only the following text about the TOSHIBA Web Camera 3D V1( in the categories X775 3D series) :
"The webcam also supports 3D playback through Nvidia's 3D Vision software. To start 3D webcam playback, enable 3D Vision, open the webcam app, and click the 3D playback option. Each time you start the app you'll be given the option of calibrating the image to change the 3D depth perception. Once calibrated, the webcam provided excellent 3D images"
On my laptop in the NVIDIA Corporation progams I do not see any webcam app!
I tested the camera in 2D with the Corel Digital Studio for Toshiba (not 3D).
Perhaps I am overlooking or missing something .
What program I need?
Regards Jacques.vsk -
Not able to create interactive pdf
Hello everyone,
I'm not able to create an offline pdf using exclusively ABAP. I tried using the tutorial "Offline Interactive Forms Using ABAP" but i'm missing something. I allready created the form using transaction SFP, and my ABAP program is like this:
REPORT ztest_interactive_forms.
DATA: wa_lfa1 LIKE lfa1.
DATA: fm_name TYPE funcname.
DATA: fp_outputparams TYPE sfpoutputparams.
DATA: fp_docparams TYPE sfpdocparams.
DATA: fp_formoutput TYPE fpformoutput.
PARAMETERS: p_lifnr LIKE lfa1-lifnr.
START-OF-SELECTION.
SELECT SINGLE lifnr name1 name2 ort01 FROM lfa1 INTO CORRESPONDING FIELDS OF wa_lfa1 WHERE lifnr = p_lifnr.
first get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'ZTEST_NCS'
IMPORTING
e_funcname = fm_name.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
vendor_data = wa_lfa1
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
When function module "fm_name" is called, variable fp_formoutput is returned blank (0 pages).
Can anyone help or suggest something ?
Thank you in advance,
Nuno SantosHi,
The default export parameter is /1bcdwb/formoutput of type
fpformoutput. This parameter has to be evaluated in the calling program if the
resulting document needs to be handled by the program itself. Export parameters
can be added only for those interfaces that are compatible with Smart Forms.
There is also only one standard exporting parameter of the form's generated
function module: /1bcdwb/formoutput of type fpformoutput. It contains three
fields:
. pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
function module FP_JOB_OPEN is set to 'X'. This is required if your
program has a download functionality or if you want to pass on your PDF to
Business Communication Service to fax or e-mail it.
Detail information on Business Communication Service can be found in the
SAP Library, Topic .Generic Business Tools for Application Developers
(BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
. pdl: contains the PDL data in hexadecimal form if parameter getpdl of
function module FP_JOB_OPEN is set to 'X'.
. pages: returns the number of pages that have been printed.
There is also only one standard exporting parameter of the form's generated
function module: /1bcdwb/formoutput of type fpformoutput. It contains three
fields:
. pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
function module FP_JOB_OPEN is set to 'X'. This is required if your
program has a download functionality or if you want to pass on your PDF to
Business Communication Service to fax or e-mail it.
Detail information on Business Communication Service can be found in the
SAP Library, Topic .Generic Business Tools for Application Developers
(BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
. pdl: contains the PDL data in hexadecimal form if parameter getpdl of
function module FP_JOB_OPEN is set to 'X'.
. pages: returns the number of pages that have been printed.
Note:
. getpdf: If set to 'X', the /1bcdwb/formoutput-pdf field of the form's generated
function module will contain the PDF data in hexadecimal form. This is
helpful for further processing the PDF file. A preview will not be possible if
getpdf = 'X'
Hope this will be helpfull.
Regards
Adil
Edited by: Syed Abdul Adil on Jun 17, 2008 4:23 PM
Edited by: Syed Abdul Adil on Jun 17, 2008 4:24 PM -
Hello everyone,
I'm not able to create an offline pdf using exclusively ABAP. I tried using the tutorial "Offline Interactive Forms Using ABAP" but i'm missing something. I allready created the form using transaction SFP, and my ABAP program is like this:
REPORT ztest_interactive_forms.
DATA: wa_lfa1 LIKE lfa1.
DATA: fm_name TYPE funcname.
DATA: fp_outputparams TYPE sfpoutputparams.
DATA: fp_docparams TYPE sfpdocparams.
DATA: fp_formoutput TYPE fpformoutput.
PARAMETERS: p_lifnr LIKE lfa1-lifnr.
START-OF-SELECTION.
SELECT SINGLE lifnr name1 name2 ort01 FROM lfa1 INTO CORRESPONDING FIELDS OF wa_lfa1 WHERE lifnr = p_lifnr.
first get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'ZTEST_NCS'
IMPORTING
e_funcname = fm_name.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
vendor_data = wa_lfa1
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
When function module "fm_name" is called, variable fp_formoutput is returned blank (0 pages).
Can anyone help or suggest something ?
Thank you in advance,
Nuno SantosDoes this happen with all ID files or just some files? What OS? Try to create a one work ID file with Times New Roman and let the file contain a single word? Can you create a pdf?
-
Not able to create new e-mail on N8 using Mail for...
Not able to create new e-mail on N8 using Mail for Exchange.
Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
When creating reply on mail the application crashes. When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
Any idea why creating mail is not possible?
Regards,
Jorisproblem is known
more info there:
/t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
there is little workaround aslo. -
Not able to type a password when trying to create a domain
Hi,
I am trying to create a domain and in that wizard, in Administrator name and password for weblogic user, I am not able to type the password. Whatever I type it doesn't get reflected in the UI . if I press Next button Error comes as password is mandatory. I am using Linux OS.
P.S. I am able to type in Name and description fields.
Kindly advise.
RegardsIf anyone else face this issue, then here comes the resolution -
Password Field Not Editable in Domain Template on Linux
Bug: 10394900
Added: 01-May-2011
Platform: Linux
On Linux, when creating a new domain using a developer template in the Oracle Fusion Middleware Configuration Wizard, the password and confirm password fields are not editable, and you cannot enter a password to create a domain.
Workaround: Do one of the following:
To work around the issue each time it occurs: Click the close window "x" button in the upper right corner of the Configuration Wizard. In the confirmation dialog that appears, click "No" to return to the Configuration Wizard. Now you can enter the password and confirmation password.
To fix the issue permanently:
Kill a scim processes. For example, kill "pgrep scim"
Modify (or create) the file ~/.scim/config to include the following line:
/FrontEnd/X11/Dynamic = true (follow case sensitivity)
If you are running VNC, restart the VNC server.
Run the Configuration Wizard again.
Regards,
Anuj -
Not able to create sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
Hi Experts,
I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
to create sales order .I am passing external sales order number to the parameter
SALESDOCUMENTIN.
I am getting following error.
"524 |Only quantity 1 EA is allowed (Item 00001"
Here EA is UOM(Unit of measurement).
Below is the sample program through which i am trying to create the sales order.
*& Report ZSDC_SALES_TEST
report zsdc_sales_test.
*DATA: wa_bapi_header TYPE bapisdhd1.
Include Name - ZSDC_SALES_ORD_UPLOAD_TOP
Program Name - ZSDC_SALES_ORD_UPLOAD_1393
Program Title - Include for Data Declaration and selection screen
Created by - Lalitha W
Created on - 18-Nov-2008
Object ID - SD_C_1393_SALES_ORDER_UPLOAD
Request Id - SD3K905579
Description - This is a common INCLUDE for data declarations and
*selection screen details.
HISTORY
Date |Developer |Req by | Description |Reference ID
| | | |
| | | |
TYPE-POOLS
*TYPE-POOLS: truxs, abap, slis.
TABLES
*TABLES: t100.
TYPES
types:begin of ty_header,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(4) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) TYPE c, " Partner(Bill To Party Number)
partner_2(25) TYPE c, " Partner(Payer Number)
partner_3(25) TYPE c, " Partner(Sales Responsible Number)
partner_4(25) TYPE c, " Partner(Order admin)
partner_5(25) TYPE c, " Partner(Contact person)
partner_1(10) type c, " Partner(Bill To Party Number)
partner_2(10) type c, " Partner(Payer Number)
partner_3(10) type c, " Partner(Sales Responsible Number)
partner_4(10) type c, " Partner(Order admin)
partner_5(10) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
end of ty_header.
types: begin of ty_item,
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
bstkd_e(35) type c, " Ship-to-party PO number
posnr(6) type c, " POSTION NUMBER
matnr(18) type c, " Material Number
kwmeng(18) type c, " Order Quantity
pstyv(4) type c, " Sales doc. item categ
kursk(18) type c, " EXCHANGE RATE****
ffprf(8) type c, " DIP PROFILE
werks(4) type c, " Delivering Plant
vstel(4) type c, " SHIPPING POINT
lgort(4) type c, " STORAGE LOCATION
route(6) type c, " Route
kurrf(18) type c, " EXCHANGE RATE-FI
ntgew(18) type c, " Net Weight
brgew(18) type c, " Gross Weight
gewei(3) type c, " Weight Unit
prctr(10) type c, " profit center
abgrs(6) type c, " RESULT ANALYSIS KEY
kalsm_k(4) type c, " COSTING SHEET
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
text_1(500) type c, " material Text 0001
tdspras_1(1) type c,
text_2(500) type c, " Pr Text 9001
tdspras_2(1) type c,
end of ty_item.
types: begin of ty_schedule_line,
bstkd(35) type c, "PO number
bstdk(10) type c, "PO date
bstkd_e(35) type c, "Ship-to-party PO number
posnr(6) type c, "sales doc.Item
etdat(10) type c, "Schedule line date
wmeng(2) type c, "Order Quantity
end of ty_schedule_line.
types: begin of ty_err ,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(2) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) type c, " Partner(Bill To Party Number)
partner_2(25) type c, " Partner(Payer Number)
partner_3(25) type c, " Partner(Sales Responsible Number)
partner_4(25) type c, " Partner(Order admin)
partner_5(25) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
message(600) type c,
end of ty_err.
types: begin of ty_t685a,
kschl type kschl,
krech type krech,
end of ty_t685a.
INTERNAL TABLES
***header
data: g_krech_1(4) type c, " Calculation type for condition
g_krech_2(4) type c, " Calculation type for condition
g_krech_3(4) type c. " Calculation type for condition
g_krech_4(4) TYPE c, " Calculation type for condition
g_krech_5(4) TYPE c, " Calculation type for condition
g_krech_6(4) TYPE c, " Calculation type for condition
g_krech_7(4) TYPE c, " Calculation type for condition
g_krech_8(4) TYPE c, " Calculation type for condition
g_krech_9(4) TYPE c, " Calculation type for condition
g_krech_10(4) TYPE c, " Calculation type for condition
g_krech_11(4) TYPE c, " Calculation type for condition
g_krech_12(4) TYPE c, " Calculation type for condition
g_krech_13(4) TYPE c, " Calculation type for condition
g_krech_14(4) TYPE c, " Calculation type for condition
g_krech_15(4) TYPE c, " Calculation type for condition
g_krech_16(4) TYPE c, " Calculation type for condition
g_krech_17(4) TYPE c, " Calculation type for condition
g_krech_18(4) TYPE c, " Calculation type for condition
g_krech_19(4) TYPE c, " Calculation type for condition
g_krech_20(4) TYPE c. " Calculation type for condition
Items
data: g_krech_item_1(4) type c, " Calculation type for condition
g_krech_item_2(4) type c, " Calculation type for condition
g_krech_item_3(4) type c. " Calculation type for condition
g_krech_item_4(4) TYPE c, " Calculation type for condition
g_krech_item_5(4) TYPE c, " Calculation type for condition
g_krech_item_6(4) TYPE c, " Calculation type for condition
g_krech_item_7(4) TYPE c, " Calculation type for condition
g_krech_item_8(4) TYPE c, " Calculation type for condition
g_krech_item_9(4) TYPE c, " Calculation type for condition
g_krech_item_10(4) TYPE c, " Calculation type for condition
g_krech_item_11(4) TYPE c, " Calculation type for condition
g_krech_item_12(4) TYPE c, " Calculation type for condition
g_krech_item_13(4) TYPE c, " Calculation type for condition
g_krech_item_14(4) TYPE c, " Calculation type for condition
g_krech_item_15(4) TYPE c, " Calculation type for condition
g_krech_item_16(4) TYPE c. " Calculation type for condition
data: it_t685a type standard table of ty_t685a.
data: wa_bapi_header type bapisdhd1,
wa_bapi_headerx TYPE bapisdhd1x,
it_bapi_item type table of bapisditm,
it_bapi_itemx TYPE TABLE OF bapisditmx,
it_bapi_cond type table of bapicond,
it_bapi_condx TYPE TABLE OF bapicondx,
it_bapi_partner type table of bapiparnr,
it_bapi_shdl type table of bapischdl,
it_bapi_shdlx TYPE TABLE OF bapischdlx,
it_bapi_order_text type TABLE OF BAPISDTEXT,
it_bapireturn type table of bapiret2.
data: wa_bapi_item like line of it_bapi_item,
wa_bapi_itemx LIKE LINE OF it_bapi_itemx,
wa_bapi_cond like line of it_bapi_cond,
wa_bapi_condx LIKE LINE OF it_bapi_condx,
wa_bapi_partner like line of it_bapi_partner,
wa_bapi_shdl like line of it_bapi_shdl,
wa_bapi_shdlx LIKE LINE OF it_bapi_shdlx,
wa_bapi_order_text like LINE OF it_bapi_order_text,
wa_bapireturn like line of it_bapireturn.
*DATA: zmode(1) VALUE 'N'.
data: it_header type standard table of ty_header.
*DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
data: it_item type standard table of ty_item.
*DATA: it_temp_item TYPE STANDARD TABLE OF ty_item.
data: it_err type standard table of ty_err.
data: it_fline1 type standard table of tline,
wa_fline1 type tline.
data: it_thead1 type thead.
data: it_fline2 type standard table of tline,
wa_fline2 type tline.
data: it_thead2 type thead.
data: it_fline3 type standard table of tline,
wa_fline3 type tline.
data: it_thead3 type thead.
data: it_fline4 type standard table of tline,
wa_fline4 type tline.
data: it_thead4 type thead.
data: it_fline5 type standard table of tline,
wa_fline5 type tline.
data: it_thead5 type thead.
data: wa_header like line of it_header,
wa_item like line of it_item,
wa_err type ty_err,
wa_bill LIKE LINE OF it_bill,
wa_bill1 LIKE LINE OF it_bill,
wa_iterr like line of it_err,
wa_t685a like line of it_t685a.
wa_bill_item TYPE ty_bill_item.
data: it_schedule_line type standard table of ty_schedule_line,
wa_schedule_line type ty_schedule_line.
data: sales_order_no type bapivbeln-vbeln.
data: ext_sales_order_no type bapivbeln-vbeln.
Variable to be used to separate the fields which are concatenated by a
runtime character
*DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
*DATA: g_filename TYPE string,
g_path TYPE string,
g_fullpath TYPE string,
g_user_action TYPE i,
g_file_encoding TYPE abap_encoding.
*DATA : g_text(8192),
data : g_mstring1(100) type c,
g_mstring2(100) type c,
g_mstring3(100) type c,
g_mstring4(100) type c,
g_mstring5(100) type c.
data: g_count1 type ebelp,
g_str_count1(6) type c.
data: g_count type ebelp,
g_str_count(6) type c.
*DATA: f_subrc LIKE sy-subrc,
f_subrc1 LIKE sy-subrc,
f_error(500) TYPE c,
item1(27) TYPE c,
item2(27) TYPE c,
item3(27) TYPE c,
item4(27) TYPE c,
i TYPE ekpo-ebelp.
*DATA: g_billplan_header TYPE c,
g_billplan_item TYPE c.
data : g_external_so type vbak-vbeln. "SO
SELECTION-SCREEN
selection-screen begin of block frame1 with frame title text-001 .
parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
p_file3 type rlgrap-filename, "Schedule line.
p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
selection-screen end of block frame1.
start-of-selection.
wa_bapi_header-doc_type = 'Z0MX'. "order type
wa_bapi_header-sales_org = '0130'."sales org
wa_bapi_header-distr_chan = '13'. "distr channel
wa_bapi_header-division = '13'. "division
Old code from copied program
wa_bapi_header-purch_no_s = wa_header-kunnr_2. " Ship to party
New code as required in Finland project
We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
wa_bapi_header-purch_no_s = 'MX100443'. "External SO i.e Old legacey SO number
wa_bapi_header-ref_1_s = '0000666666'. "Sold to party
wa_bapi_header-ord_reason = wa_header-augru.
wa_bapi_header-purch_no_c = 'ddr1234'. " PO number
wa_bapi_header-purch_date = sy-datum. " PO date
wa_bapi_header-req_date_h = sy-datum. " Required Delivery Date
wa_bapi_header-pmnttrms = '01'. " Payment Terms
wa_bapi_header-incoterms1 = wa_header-inco1.
wa_bapi_header-incoterms2 = wa_header-inco2.
wa_bapi_header-price_date = wa_header-prsdt. " Pricing date
wa_bapi_header-currency = wa_header-waerk. " Document Currency
wa_bapi_header-sales_grp = wa_header-vkgrp. " Sales group
wa_bapi_header-price_list = wa_header-pltyp. " Price list type
wa_bapi_header-cust_group = wa_header-kdgrp. " Cust Group
wa_bapi_header-ship_type = wa_header-vsart. " Shipping Type
wa_bapi_header-purch_no_s = wa_header-bstkd_e. " Ship-to-party po number
wa_bapi_header-collect_no = wa_header-submi. " Collective No.
wa_bapi_header-name = wa_header-bname. " Name
wa_bapi_header-ref_1 = wa_header-ihrez. " Your Reference
wa_bapi_header-cust_grp1 = wa_header-kvgr1. " Industry
wa_bapi_header-cust_grp2 = wa_header-kvgr2. " Customer BU
*ENDFORM. " f_header
IF wa_header-partner_1 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'AG'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_header-partner_2
importing
output = wa_header-partner_2.
IF wa_header-partner_2 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'WE'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
perform f_item.
data : order_items_inx type table of bapisditmx with header line.
order_items_inx-material = 'X'. "
order_items_inx-target_qty = 'X'. "
order_items_inx-comp_quant = 'X'. "
order_items_inx-trgqty_den = 'X'.
order_items_inx-rnddlv_qty = 'X'.
order_items_inx-updateflag = 'I'.
order_items_inx-target_qu = 'X'.
order_items_inx-plant = 'X'. "
append order_items_inx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
salesdocumentin = 'MX11111152'
order_header_in = wa_bapi_header
order_header_inx = wa_bapi_headerx
importing
salesdocument = sales_order_no
tables
return = it_bapireturn
order_items_in = it_bapi_item
order_items_inx = order_items_inx
order_partners = it_bapi_partner
order_conditions_in = it_bapi_cond.
if sy-subrc is initial.
commit work.
endif.
*& Form f_item
text
form f_item .
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_item-posnr
importing
output = wa_item-posnr.
wa_item-posnr = '000010'.
IF sy-subrc EQ 0. "IS INITIAL.
move wa_item-posnr to g_str_count."commented out by shakti
ENDIF.
wa_bapi_item-itm_number = wa_item-posnr. " Line item
WA_BAPI_ITEM-PO_ITM_NO = WA_ITEM-EBELP.
wa_bapi_item-division = wa_item-spart.
wa_bapi_item-purch_no_c = 'ddr1234'. " po number
wa_bapi_item-purch_date = sy-datum. " po date
wa_bapi_item-purch_no_s = 'MX11111112'. " Ship-to-party po number
wa_item-matnr = 'MAXIMO_SERVICE'.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = wa_item-matnr
importing
output = wa_item-matnr
exceptions
length_error = 1
others = 2.
if sy-subrc is initial.
wa_bapi_item-material = wa_item-matnr. "material
endif.
wa_bapi_item-target_qty = '1'. " Order qty
wa_bapi_item-comp_quant = '1'.
wa_bapi_item-target_qu = 'EA'.
wa_bapi_item-fixed_quan = '1'.
wa_bapi_item-comp_quant = wa_item-kwmeng.
wa_bapi_item-trgqty_den = '1'.
wa_bapi_item-rnddlv_qty = wa_item-kwmeng.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_item-ps_psp_pnr
IMPORTING
output = wa_item-ps_psp_pnr.
IF sy-subrc = 0.
wa_bapi_item-wbs_elem = wa_item-ps_psp_pnr.
ENDIF.
wa_bapi_item-item_categ = 'ZMAX'.
wa_bapi_item-ex_rate_fi = wa_item-kurrf.
wa_bapi_item-dli_profil = wa_item-ffprf. " Dynamic item processor profile
wa_bapi_item-route = wa_item-route. " route
wa_bapi_item-exchg_rate = wa_item-kursk.
wa_bapi_item-plant = '2090'. " Plant
wa_bapi_item-ship_point = 'FN11'. " Shipping point
wa_bapi_item-store_loc = wa_item-lgort. " stg loc
REPLACE ALL OCCURRENCES OF ',' IN wa_item-ntgew WITH '.'.
REPLACE ALL OCCURRENCES OF ',' IN wa_item-brgew WITH '.'.
wa_bapi_item-net_weight = wa_item-ntgew. "
wa_bapi_item-gross_wght = wa_item-brgew. "
call function 'CONVERSION_EXIT_CUNIT_INPUT'
exporting
input = wa_item-gewei
language = sy-langu
importing
output = wa_item-gewei.
EXCEPTIONS
unit_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
wa_bapi_item-untof_wght = 'KG'. " weight unit
replace all occurrences of ',' in wa_item-kursk with '.'.
replace all occurrences of ',' in wa_item-kurrf with '.'.
wa_bapi_item-profit_ctr = wa_item-prctr. " Profit center
wa_bapi_item-resanalkey = wa_item-abgrs. " RESULT ANALYSIS KEY
wa_bapi_item-cstg_sheet = wa_item-kalsm_k. " COSTING SHEET
append wa_bapi_item to it_bapi_item.
endform. " f_item
Thanks & regards,
Chetansee the following to create sales order:-
*& Report ZSALESORDER
*&DEVELOPED BY JANI KRUPA 4.10.2008
REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF. -
I am using an iMac and i am selling it tomorrow. So i am trying to back up all my files on my transcend external HD 500GB. I am not able to create a folder in the transcend and also even if I try to copy a file in the transcend folder. It just wont happen. Please help !!
My transcend HD is on read only mode I guess. What to do? I dont have a windows computer to check and I need to create the back up right now..Welcome to Apple Support Communities
It looks like the external disk is formatted in NTFS, a format that OS X can't write in. The solution is to format the external drive in "Mac OS Extended (Journaled)" (if you are going to get a Mac), or "MS-DOS (FAT)" (if you are going to get a PC) as Format in Disk Utility > http://pondini.org/OSX/DU1.html
Then, you will be able to copy the files you need to the external drive. Note that "MS-DOS (FAT)" doesn't support files bigger than 4 GB.
<Edited By Host> -
Certen user is not able to create the sc using sepecific vendor
Hi,
User is not able to create the SC entering specific vendor .
This vendor is in maintained in SRM for one pur.org (I have checked in PPOMA_BBP).
Then why he is not able to creating the sc using this Vendorwhether user is belong to same region of the Vendor or different. Is there any enhancements you have like that.
Please check those things.
Hope this will help.
Thanks
Venkatesh P -
when sending email through yahoo account , i cant upload any attachment with email, a sign of uploading lasts forever without uploading the file.
this issue do not happen with hotmail account or when using IE to browse Yahoo account.Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Not able to create Follow up transaction since it has been grayed out
Hi Experts,
We have a scenario where in we will create the Sales Transactions (OR) in ECC and then it will replicates to CRM.
In CRM we wants to create Returns Order (RE) as a follow up Transaction to OR (which is replicated from ECC to CRM) .
When I tried to create Returns Order (RE) in CRM as a follow up document to Sales Transaction (OR), the follow up Transaction CRM Returns (RE) has been grayed out. I mean it is in display mode only.
And then I created Sales Transaction (OR) in CRM itself and then I tried to create follow up Returns Transaction (RE) I was able to create.
But I am not able to Create Returns Order (RE) for the Sales Transactions (OR) that have been replicated from ECC to CRM.
Can anybody help me in resolving this issue. Any help ful answer will be rewarded with points.
Thanks in advance,
-Frederick Johnson.Hi Fredrick,
Please check, whether you have completed all the steps for Copying Control for Business Transactions in the following path in IMG:
SPRO->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions:
- Define Copying Control for Transaction Types
In this step, you define the control for copying business transaction types.
To do this, you enter a source tranaction type and a target transaction type, and define the corresponding conditions for this combination.
- Define Copying Control for Item Categories
In this step, you define the control for copying item categories.
To do so, you enter a source item category and a target item category, and define the corresponding conditions.
- Define Item Category Determination when Copying
In this step, you define a specific item category determination which should be run during copying. The item category is used to find the target item category in the source transaction for the transaction type in the target transaction. This means that the transaction type for the source transaction is not relevant for the item category determination.
If the system cannot find an entry for the copying transaction in this table, the item category is found in the target transaction using the normal item category determination.
This might help you
regards
Srikantan -
Not able to create a web project with jsf or jsp or struts or spring
Hi,
I am trying to create a dynamic web project with jsf or jstl or struts or spring or any of web options available for a web project, but I am not able to do it.
When I choose any of these options, the wizard asks me to "select an existing jstl/jsf/Spring 2.0 library, or click Add to add a new library." and since it doesn't show any existing libraries there, I clicked on add new library. When I click add, it opens a new dialog box where it has two options :
1. to use spring/jstl/jsf lib from bea web site - when I choose this option, it tries to connect to the bea web site and gives me error that "connect time out". I don't know why it is not able to connect to the internet. I am not able to see the help also. There it gives error "The requested URL could not be retrieved".
2. to use libraries from an existing spring installation - I provide the path of a directory where spring lib are, but then it gives me error that this is not a valid installation.
On another machine, I am able to see the help contents, but still not able to get these libraries from the bea site.
Please help.
Thanks in advance,
SushmaHi Sushma,
The issue you are facing has been addressed and will be part of the next release. For the current release, please follow the steps listed below.
Send an email to [email protected] with details on specific facets you are trying to enable on your project.
You will be provided with a url where you can download the required jars and details on how to manually add the jars to the workspace which will prevent the download on demand scenario.
Cheers
Raj
Maybe you are looking for
-
How can I change the input level of a BufferedImage??? I tried to use LookupOp with a ShortLookupTable object, but it changed the input level and output level too... So I just want to modify input level... Any Body have suggestions??
-
Monthly Report with time-dependent navigational attribute
Hi, We've a characteristic costcenter that has a navigational attribute called segment which is time-dependent attribute. CostCenter-Segment master data is as follows. COSTCENTER Segment validFrom Valid To ==================================
-
I want to connect several hosts (each in a unique VLAN, not VLAN1) to a switch. This switch would be connected to a router used as a gateway to the internet. Question: would this prevent the hosts (VLANS) from communicating as long as there is no tru
-
I have had to do a clean install on my PC of Win7 64bit. Before that I was running LR3.2 updated to 4.2 I now find that LR3.2 runs but of course my catalogues are in 4.3 format. LR3.2 will not upgrade and downloading 4.3 will not accept my serial. I
-
Hi, I get error when i try to send email. 1. Internal error: SO_OBJECT_MIME_GET Exception: 2 i had checked all these notes 671260 530932 487754 806169 no luck. 2. In table TWPURLSVR, what should be the web Server field. I