Not able to see max, pref and timeout value in the debug output

Hi,
I have enable connection pooling for the ldapcontext. and have set init, pref and max pool size as 1,3,5 respectively.
However when i am running this program i am getting following output...
Also it is returning me busy connections some times?
I am using auth type as 'none simple' and protocol as 'plain'. [i am using jdk 1.5.0_2].
What can be the problem?
=======
***** start *****
idle timeout: 0
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
protocol types: plain
authentication types: none simple
anonymous pools:===== Pool start ======================
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
current pool size: 0
====== Pool end =====================
simple auth pools:
===== Pool start ======================
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
current pool size: 0
====== Pool end =====================
***** end *****
LdapPoolManager: using authmech: none
com.sun.jndi.ldap.pool.Pool@14693c7 {}.get(): ldap.openldap.org:389:plain:
=======

Hello Prakash,
Thanks for the reply
I am able to see the mail in SOST but when I click on the Display Document to see the content of the mail then I am getting this error of 'you are not connected to the internet'
My Program is to put the logo in my email body
I am sending you the attached image

Similar Messages

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arl

Hi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

Not able to see published task and not able to reset version for the task

Hi,
Created a task ,validated,by selecting the task clicked Publish button in tools to publish the task.
In Client Application(Callcenter) navigated Administration-Business Process->Task Deployment
Here not able to see published task to activate.
Tried twice by copying record but not able to see.
I am not able to reset version for the task created.
Could you please let me know how to overcome these.
Using sample database of siebel8.0.0.5
Thank you

Hi Dude,
To trobleshoot this you need to do the following steps:
1) cross check in tools the srf which you are compling , the same srf should be used by the clent application i.e. call center
2) the secound thing is in the Siebel tools there is a toolbar at the top, from where you have published the task, there beside you will find a button called Revise you can revise you task, first select task and click revise button.
3) and also you remember a task which you create is validated by right clicking the task record and choose validate.
4) remember, a task which you create should be registered same as like responsibilities, by navigating to Administration-Applicatrion > Task
Register the task with same name as you have used in Siebel Tools.
As, for best practices after creating a task first validate it, then after register it in Administration-Applicatrion > Task , then after toolbar there is a button callled publish and activate click that one .
and that's All.
Regards,
Neeraj Verma

Server 2012 std not able to see Domain, DC and DNS on Win SBS 2008 std Domain

Hi There
I have a HP ML 110 G5 SBS 2008 std server as my DC on my network. I recently added a HP Microserver running Server 2012 std (with no roles or features installed) to act solely as a file server for a 3rd party program as the program was not running efficiently
on the main server.
The problem I am having now is that the 2012 server keeps falling off the domain and cannot contact DNS server. I have also had to re-enable remote desktop several times. It also shows the 2012 Server as being on a private firewall profile and not on the
domain firewall profile but I suspect that this is part of the same problem.
the resulting problem that this is causing is that the local machines that need to contact an SQL database on the 2012 fileserver intermittently either time out or are very slow to connect.
So far I have tried:
Switching from Static IP to DHCP.
Re-adding the server to the domain.
Stopping and restarting DNS services on the DC.
Checking physical Network connections and routing.
Putting the 2012 server into the same Organizational Unit as the 2008 DC.
Has anyone else encountered this problem when adding a 2012 server to a 2008 domain? I have a feeling that the solution is probably something simple that I've overlooked, but I can't think what. Any help would be greatly appreciated.
Regards
Russ
Also, as some additional info -
Event viewer gives the following errors:
Group Policy Error:
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 2015-04-27 01:17:51 PM
Event ID: 1129
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: [SERVERNAME].[DOMAIN].local
Description:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has
successfully processed. If you do not see a success message for several hours, then contact your administrator.
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1129</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-04-27T11:17:51.111942100Z" />
<EventRecordID>19056</EventRecordID>
<Correlation ActivityID="{C0CBAF2B-1E93-49C0-B910-069AE43F74B2}" />
<Execution ProcessID="732" ThreadID="1336" />
<Channel>System</Channel>
<Computer>[SERVERNAME].[DOMAIN].local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1548</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">0</Data>
<Data Name="ErrorCode">1222</Data>
<Data Name="ErrorDescription">The network is not present or not started. </Data>
</EventData>
</Event>
DNS Error:
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 2015-04-27 04:54:58 PM
Event ID: 8015
Task Category: (1028)
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: [SERVERNAME].[DOMAIN].local
Description:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter with settings:
Adapter Name : {3DDD0E46-D879-48C0-9DF6-5FAC0F1A56C4}
Host Name : [SERVERNAME]
Primary Domain Suffix : [DOMAIN].local
DNS server list :
192.168.2.10
Sent update to server : <?>
IP Address(es) :
192.168.2.15
The reason the system could not register these RRs was because the update request it sent to the DNS server timed out. The most likely cause of this is that the DNS server authoritative for the name it was attempting to register or update is not running
at this time. You can manually retry DNS registration of the network adapter and its settings by typing 'ipconfig /registerdns' at the command prompt. If problems still persist, contact your DNS server or network systems administrator.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DNS-Client" Guid="{1C95126E-7EEA-49A9-A3FE-A378B03DDB4D}" />
<EventID>8015</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>1028</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-04-27T14:54:58.599130300Z" />
<EventRecordID>19105</EventRecordID>
<Correlation />
<Execution ProcessID="856" ThreadID="952" />
<Channel>System</Channel>
<Computer>[SERVERNAME].[DOMAIN].local</Computer>
<Security UserID="S-1-5-20" />
</System>
<EventData>
<Data Name="AdapterName">{3DDD0E46-D879-48C0-9DF6-5FAC0F1A56C4}</Data>
<Data Name="HostName">[SERVERNAME]</Data>
<Data Name="AdapterSuffixName">[DOMAIN].local</Data>
<Data Name="DnsServerList"> 192.168.2.10</Data>
<Data Name="Sent UpdateServer"><?></Data>
<Data Name="Ipaddress">192.168.2.15</Data>
<Data Name="ErrorCode">1460</Data>
</EventData>
</Event>

Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Not able to see menu bar and dock after maximizing.

Prior to installing Yosemite, maximizing a window left the menu bar and dock visible; with Yosemite they are no longer visible. How do I reset this?

Moving the mouse pointer to top or bottom of screen (assuming menu at top and dock at bottom), should display them.
Or, Control/Command/F combination.

I am using windows Macbook pro 15 retina display model with latest mountain lion 10.8.3 software Have installed windows 8 perfectly via boot camp. However many a time the machine is not able to boot windows 8 and aborts. just shows the green screen for a

I have installed Windows 8 perfectly ia boot camp but on booting the windows 8 does not load up fully. It comes upto the windows green screen for a moment and then goes blanlk. It is very frustrating.

no one has replied me too got this issue ,

Not able to see other users change list in IR/ID

Hi All,
I need to perform the CTS+ transports in PI 7.1 and when ever i am going to change list tab apart from my user id i am not able to see any other user id to transfer the objects to my id
Is some setting is missing or some role we need to assign.
Appreciate your reponse on this.
Thanks
Ankur

Hi Anku,
Have a look on this doc [Limit Authorization PI Content objects.pdf|http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/a005629b-c063-2910-0fb8-f57dc68abaca], and/or contact your basis team who manages the user roles...
The same in [e-learning|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40457bb0-c663-2910-85ad-f5f42edb715a].
just in case of... for ESR authorization, you have this one [How To Setup Profile Based Authorization In ESR Using PI 7.1 EHP1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a3efb4-57a1-2d10-a6b9-fed6d21799f8?QuickLink=index&overridelayout=true]
Else... a stupid question:
in "change list" tab, have you click on the "filter" button to be able to select "User = All" ?
and then to do your transfer...
Regards.
Mickael
Edited by: Mickael Huchet on Feb 14, 2012 9:24 AM

HT2474 I am not able to see my dock on the MacBook v 10.6.8

i am not able to see my dock and also getting error 13014 for itunes?.

If your trying to put pictures that are on your phone to your computer you import it see link below
http://support.apple.com/kb/HT4083

Not able to see Subcomponents

Hi
Not able to see Applications,components and models of a successful deployed content in the content administrator .What is the reason and where to get a clue.
Thanks and help much appreciated.

Hi,
To see the deployed applications in content admin, you need to create a folder, define a iview for the application using template.Then you should be able to see the applications in content admin.
Have you done this ? or is your query something else ?
Cheers...,
Raghu

I am trying to communicate with third party instrument via usb but I dont know how to do it even in Ni-max I am not able to see usb port symbol in Devices and Interface section.

hello,
I am tring to communicate my Powersupply which is not from Ni via USB cable ,but I am not able to see my connection or usb symbole in Ni-max .
first time I am using this will you please guide me,and is there any driver i need to download for that?here I put one attachment regarding to this.
Thanks in advance.
Solved!
Go to Solution.
Attachments:
usb is not detected.png ‏182 KB

ya I know that,
thats y i asked you that y it is so because i am not able to see that usb port here i can see that much only.
thats y i got confused.
and I can see my hameg connection in my control panel and also in device manager.
http://www.hameg.com/drivers.0.html?&no_cache=1
this is website for hameg driver in that product select hmp4040 than hmp4000 list will open in that i have download third one in which plug and play is given.
or here i send my vi it might be helpful.
Attachments:
hmp4040 Output DC Volts.vi ‏17 KB

Not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c

not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
But i'm able to see other IKM's please help me, how can i see them

Nope, It has not been altered.
COMPONENT NAME: LKM Oracle to Oracle (datapump)
COMPONENT VERSION: 11.1.2.3
AUTHOR: Oracle
COMPATIBILITY: ODI 11.1.2 and above
Description:
- Loading Knowledge Module
- Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
- This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
- An External table definition is created on the source and target servers.
- When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

Not able to see the crystal reports XI version in the IE 7 and IE 8

Hi Team,
I am using web based application developed in VB,ASP,SQL SERVER,Crystal Reports(XI). I am able to see the Crystal Reports in IE 6. But i am not able to see the reports in IE 7 and IE 8. While clicking on the reports button it is showing the red X image top left cornor.
I am using CrystalActiveX viewer11 version for viewing the reports.
In IE 6,if the client using fiirst time for vieiwing the reports,it will ask the Activexviewer control prompt and says ok,it will display the reports.
Thanks and Regards
Eshwar

Thanks your advise.But we are using following crystal reports (XI) version and we don't have CRXI with R1 and R2.
CurrentVersion:11.0.0.895 ( CR Developer and Product Type:Full)
Crystal Reportviewer11 configured in the IIS which is version (5.0). and configured the virtual folder to C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\.
Our web application code also configured in the IIS at same level.
When the user wants to see the reports through the application,it will ask the Plugin of Crystal Report Viewer and user will download this plugin and it will save in the IE plug ins.It will ask only first time viewing the reports for the next onwards it will not ask or prompt of the Activex control.
So please suggest me, is there any upgrade version of this Crystal Reportviewer11 needs to be installed or any browser setting need to be configured for IE 7 and IE 8.
waiting for your reply.
Regards
Eshwar

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

My firefox webpage now opens up as a whole page and I am not able to see any any menu bars

All of a sudden my firefox webpage now opens in the whole window and I am not able to see any menu bars in the top or the "start" icon in the bottom of the screen

Toggle Full Screen mode on/off with F11 -- very useful keyboard shortcut.
References:
* http://dmcritchie.mvps.org/firefox/keyboard.htm
* http://kb.mozillazine.org/Resizing_oversize_window
* http://kb.mozillazine.org/Resizing_oversize_window
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Not able to see max, pref and timeout value in the debug output

Similar Messages

Maybe you are looking for