Not able to stop OPMN processes using OPMNCTL on AS 10.1.2.0.2

Hello,
When trying to stop opmnctl processes using opmnctl following error is coming
$ opmnctl stopall
opmnctl: stopping opmn and all managed processes...
================================================================================
opmn id=appsdev2.mpmkvvcl.com:6201
OPMN is terminating
opmnctl: graceful stop of processes failed, trying forceful shutdown...
Unacceptable request: OPMN is terminating
HTTP/1.1 406 Unacceptable request
Content-Length: 168
Content-Type: text/html
<?xml version='1.0' encoding='ISO-8859-1'?>
<response>
<opmn id="appsdev2.mpmkvvcl.com:6201" http-status="406" http-response="OPMN is terminating">
</opmn>
</response>
$
I also tried opmnctl shutdown but still issue is same.
Please help thanks in advance

Looks like something may have been hung. Kill any process still running after a shutdown of opmn and then delete any left over pids files in the states directory. After that you can do a opmn startall.

Similar Messages

Not able to stop batch session

Hii,
I have placed one session on error only mode.
it has been running for last 5 hrs.I am not able to stop the session.
Even after loging out of the system it still shows active session.when i tried to kill the session but it is not allowing me to kill the session.instead one more session is getting created.i am able to kill that session also.
its very urgent pls help.
Regards,
Viren.

see if this part of sap-help helps you!
Deleting Sessions
Use
Normally, batch input sessions are deleted from the session list automatically when they are completed. However, sessions remain in the list if any of the following is true:
They were generated with the KEEP option.
They contain errors or were aborted with the /bend OK code. (Such a session is deleted when you finish processing it, unless it was generated with the KEEP option.)
When you no longer need sessions that have been held in the list, you can explicitly delete them.
Do not delete any sessions that contain unprocessed transactions. You must first correct and process such transactions or enter the data in the transactions into the R/3 System in some other way.
Prerequisites
Start the batch input management tool: Select System ® Service ® Batch input ® Sessions. Alternate: Enter transaction SM35. Both paths take you to the session overview of the batch input system.
Procedure
To delete a session from the session queue, mark the sessions to be deleted and choose Delete from the tool bar. The system asks you to confirm the deletion. It also asks you if the session log should be deleted together with the session.
Message was edited by: Bapujee Naidu

Not able to stop ASM on 11g R2

We are trying to bounce 11g R2 database and ASM with RAC, I was able to shutdown database using srvctl with out any issue,
[oracle@dev1 ~]$ srvctl status database -d dev
Instance dev1 is running on node dev1
Instance dev2 is running on node dev2
[oracle@dev1 ~]$ srvctl stop database -d dev
however when i am trying to stop ASM i could not able to stop using srvctl
[grid@dev1 ~]$ srvctl stop asm -n dev1 -i +ASM1
-i option has been deprecated and will be ignored.
PRCR-1014 : Failed to stop resource ora.asm
PRCR-1065 : Failed to stop resource ora.asm
CRS-2529: Unable to act on 'ora.asm' because that would require stopping or relocating 'ora.DEVDATA.dg', but the force option was not specified
any comments.
Thanks

Also please provide the output of the following:
srvctl status asmIn your 1st post you typed:
[oracle@dev1 ~]$ srvctl status database -d dev
Instance dev1 is running on node dev1
Instance dev2 is running on node dev2
[oracle@dev1 ~]$ srvctl stop database -d dev
however when i am trying to stop ASM i could not able to stop using srvctl
[grid@dev1 ~]$ srvctl stop asm -n dev1 -i +ASM1
-i option has been deprecated and will be ignored.
PRCR-1014 : Failed to stop resource ora.asm
PRCR-1065 : Failed to stop resource ora.asm
CRS-2529: Unable to act on 'ora.asm' because that would require stopping or relocating 'ora.DEVDATA.dg', but the force option was not specifiednotice this command "srvctl stop asm -n *dev1* -i +ASM1"
you used dev1 after the "-n" option but it looks like dev1 is your instance name and not your node name.
can you please try:
srvctl stop asm -n <hostname>Thanks
Edited by: user11150436 on Oct 25, 2010 12:09 PM
Sorry I see dev1 is your nodename as well

Not able to Stop Instance

Hi,
Not able to stop our Solution Manager system.
Os- AIX 6.1 & database-Oracle 11
Getting this error when trying to stop the instance:
pm2adm> stopsap unxs0275
Checking PM2 Database
Database is running
stopping the SAP instance DVEBMGS10
Shutdown-Log is written to /support/home/pm2adm/stopsap_DVEBMGS10.log
/usr/sap/PM2/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Stop
stop of Instance failed
Error log:
pm2adm> pg stopsap_DVEBMGS10.log
Trace of system startup/check of SAP System PM2 on Fri 26 Aug 10:55:50 2011
Called command: /usr/sap/PM2/SYS/exe/run/stopsap stop
10:55:54
stopping the SAP instance DVEBMGS10
10:55:55
Shutdown-Log is written to /support/home/pm2adm/stopsap_DVEBMGS10.log
10:55:57
/usr/sap/PM2/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Stop
26.08.2011 10:55:57
Stop
FAIL: HTTP error, HTTP/1.1 401 Unauthorized
10:55:59
stop of Instance failed
Can you please suggest?

The sapstartsrv is not allowing you to perform the Stop option for instance 10.
The sapstartsrv should create a streamfile in the /tmp/.sapstream5<instance number>13. Check
if this file has the right permition, something like that:
srwx--- 1 <sap>adm sapsys .sapstream51013
To solve the issue you could try:
1. Try restart the sapstartsrv for the instance 10 and check if this will solve the problem.
2. check if the s-bit permission in the program sapuxuserch (note 927637)
3. In the last way you could disable the protect method for sapstartsrv with the instace profile parameter
"service/protectedwebmethods = NONE" and restart the sapstartsrv. This certainly will solve the problem, but I do not recommend it for security aspect.
Before unprotect the web methods you should try to update the sapstartsrv.
Edited by: Clebio Dossa on Aug 27, 2011 12:52 AM

Workflow - Not able to stop at the breakpoint, how to debug?

Hi,
I am working on solving a workflow problem, but i am not able to stop at the breakpoint put on the function module called through the program.
I am sure that the function module is called through the workflow. please tell me why is it not stopping.
Pls help.
Regards,
Chamandeep

maybe because it is a background method, its then executed by wf-batch.
the easiest way to test/debug a method is doing it with tx swo1, fill in the Business object and test the method with the corresponding input parameters
/Peter

Not able to stop Data supplier bridge

Hi,
After upgrading to SP 15 of XI3.0, we are not able to stop Data
Supplier Bridge in http://Host:50000/sld --> Administration --> Data
Supplier Bridge.
We have upgraded all components to SP15 and there is no problem with
that. Please help me with this.
Regards

Hi Kiran,
Have a look at the following thread.
Data Supplier Bridge won't start in URL
Rgds,
Sam Raju

Not able to complete activation process.

After updating my iPad2 to ios8.0.2., I lost my ability to connect to my cellular network, with an error message reading "Not able to complete activation process.
Does anyone know of a fix for this problem?

Try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data. Bsydd uk

Not able to change the password using FNDCPASS

I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
[applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
Log filename : L2741743.log
Report filename : O2741743.out
APP-FND-01630: Cannot open file L2741743.log for appending
Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
Can some one pls guide me on this

Duplicate post-
Not able to change the password using FNDCPASS
Please post only once.
Thanks,

Certen user is not able to create the sc using sepecific vendor

Hi,
User is not able to create the SC entering specific vendor .
This vendor is in maintained in SRM for one pur.org (I have checked in PPOMA_BBP).
Then why he is not able to creating the sc using this Vendor

whether user is belong to same region of the Vendor or different. Is there any enhancements you have like that.
Please check those things.
Hope this will help.
Thanks
Venkatesh P

I am not able to print double side using HP 2015dn printer using imac

I am not able to print double side using HP 2015dn printer using imac.

I found this information on HP site, but the article was quite old. May still be relevant:
1. Create a multi page document, or something that is more than one page.
2. Go to File/Page Setup.
3. Ensure the printer is listed in the Format for menu.
4. Click OK.
5. Go to File/Print but do not print yet.
6. Change the Copies and Pages menu to 'Layout'.
7. The Two-Sided option will be selectable only if the P2015 is listed in the Printer menu at the top of the print dialogue box.
8. Once you have chosen Long-edged binding, for example, click Print.

Not able to stop database using srvctl

When i stop database using srvctl from node1.. "srvctl stop database -d mosa" it does not stop. I tried "srvctl stop database -d mosa -o immediate" but to no luck. Could anybody help me on this issue.
OS = HP-UX
Database = Oracle 9i
Instance1 = mosa1
Instance2 = mosa2
node1 = hp1
node2 = hp2
DB Size = 50GB
I have opened another session to check srvctl status
$srvctl status database -d mosa
Instance mosa1 is not running on node hp_data1
Instance mosa2 is running on node hp_data2
NOTE:- BEfore i stop database, i had stopped listener.
Regards,
Vikhar

Thank you , issue is solved.
After i give below given command, i checked the status by
$srvctl status database -d dbname
$Instance mosa1 is not running in node1
$Instance mosa1 is running in node2
It means PROBLEM with instance2
I have got following error message in alert_log file
attempting to shut down the database and the database hangs at $srvctl stop database -d dbname. The alert log contains the following message:
SHUTDOWN: Waiting for active calls to complete
There are no other error messages in the alert log.
+Solution Description:
=====================
Caveat: This note is intended for Unix platforms primarily, but we should
address this issue on Windows platforms as well. On Windows, stopping the
service is a valid workaround for these errors.
Locate and kill any client connections to the database at the Unix level, as
follows:
1. Locate any client connections to the database using ps, and grep for any
processes belonging to this .
Example: ps -ef | grep V733
2. Look for processes that include a 'Local=No' designation.
Example: osupport 6235 1 0 Nov 24 0:01 oracleV733 (LOCAL=NO)
3. Kill the Unix process(es) with the 'Local=No' designation.
Example: Kill -9 6235
Explanation:
============
The database is waiting for pmon to clean up processes, but pmon is unable to
clean them. The client connections to the server are causing the shutdown
immediate or normal to hang. Killing them allows pmon to clean up and release
the associated Oracle processes and resources+
What resources are we talking about?
1) Any non committed transactions must be rolled back
2) Any temporary space (sort segments / lobs / session temporary tables) must be freed
3) The session itself and any associated memory consumed by the session.
4) Internal locks / enqueues must be cleaned up
Often Oracle (SMON or PMON depending on whether Shared Server is used) will wait for the OS to terminate the process(es) associated with the session. I the OS never returns, or fails to terminate them, then the instance shutdown will hang with this message (Shutdown Waiting for Active Calls to Complete) Other means exist to achieve a quick shutdown.
Thank you so much for your efforts.
Edited by: VIKHARAHMED on Feb 27, 2011 10:19 PM
Edited by: VIKHARAHMED on Feb 27, 2011 10:25 PM

Not able to start Managed server using nohup command and failed to authenticate weblogic user

Hi,
I stopped weblogic Admin server, managed server and opmnctl. and restarted Admin server successfully but I'm able to start managed start without nohup command. if I use nohup command then it's not able to get authenticate and faild to start managed server. I created boot.property file with weblogic user name and password still not working. is there anyother way to suppy login credentials for managed server?
how can I supply login credentials in below command?
nohup ./startManagedWebLogic.sh bi_server1 t3://machine:7001 > bis1_startup.log &
Appreciate you for your help
Thanks
Jay.

/app/obiee_11g/Oracle_BI1/jdk/bin/java -server -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics -Dweblogic.Name=bi_server1 -Djava.security.policy=/app/obiee_11g/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/app/obiee_11g/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/app/obiee_11g/wlserver_10.3 -Dwls.home=/app/obiee_11g/wlserver_10.3/server -Dweblogic.home=/app/obiee_11g/wlserver_10.3/server -Dcommon.components.home=/app/obiee_11g/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/app/obiee_11g/user_projects/domains/bifoundation_domain -Djrockit.optfile=/app/obiee_11g/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/servers/bi_server1 -Doracle.domain.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/carml -Digf.arisidstack.home=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/app/obiee_11g/oracle_common/modules/oracle.ossoiap_11.1.1,/app/obiee_11g/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.oracle.home=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -Dweblogic.MaxMessageSize=50000000 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -DHYPERION_HOME=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_INSTANCE=novalue -Dhyperion.home=/app/obiee_11g/Oracle_BI1 -DEPM_REG_PROPERTIES_PATH=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Depm.useApplicationContextId=false -Doracle.biee.search.bisearchproperties=/app/obiee_11g/Oracle_BI1/bifoundation/jee/BISearchConfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=true -Doracle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enableJSSE=true -Dfile.encoding=utf-8 -Doracle.ecsf.security.service=oracle.biee.search.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.search.services.BISearchServiceConfiguration -Dxdo.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/bipublisher -DXDO_FONT_DIR=/app/obiee_11g/Oracle_BI1/common/fonts -Drtd.instanceName=RTD_bi_server1 -Dem.oracle.home=/app/obiee_11g/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=01scqabi01.natusmed.natus.com:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/app/obiee_11g/patch_wls1035/profiles/default/sysext_manifest_classpath weblogic.Server
<Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 17, 2013 12:24:01 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.10-b01 from Sun Microsystems Inc.>
<Nov 17, 2013 12:24:07 AM PST> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
Enter password to boot WebLogic server:
<Nov 17, 2013 12:24:07 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Nov 17, 2013 12:24:09 AM PST> <Error> <Configuration Management> <BEA-150021> <The admin server failed to authenticate the identity of the user starting the managed server. The reason for the error is .>
<Nov 17, 2013 12:24:09 AM PST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://01scqabi01.natusmed.natus.com:7001.>
<Nov 17, 2013 12:24:09 AM PST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Nov 17, 2013 12:24:09 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 17, 2013 12:24:09 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 17, 2013 12:24:09 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file /app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
<Nov 17, 2013 12:24:19 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 17, 2013 12:24:20 AM PST> <Critical> <Security> <BEA-090403> <Authentication for user denied>
<Nov 17, 2013 12:24:20 AM PST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Nov 17, 2013 12:24:20 AM PST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Not able to update the project using 'BAPI_PROJECT_MAINTAIN'.

I want to create a project , with reference to an already existing project.
I am using 'BAPI_PROJECT_GETINFO' to get the data of the existing project.
The bapi gives the following:
1)     e_project_definition.
2)     e_wbs_element_table.
3)     e_wbs_hierarchie_table
I am passing the u2018e_project_definitionu2019 to 'BAPI_PROJECTDEF_CREATE' to create project.The project is created successfully.
But I am not able to update the project with u2018e_wbs_element_tableu2019
and u2018e_wbs_hierarchie_tableu2019. I am using 'BAPI_PROJECT_MAINTAIN' to update the project.
The program is not giving an error, but it is also not updating the E_WBS_ELEMENT_TABLE and E_WBS_HIERARCHIE_TABLE.
I am attaching the code below.
*& Report ZTEST_PC.
DATA: project_definition   TYPE bapipr-project_definition,
      with_activities      TYPE bapipr-with_activities,
      with_milestones      TYPE bapipr-with_milestones,
      with_subtree         TYPE bapipr-with_subtree,
      e_project_definition TYPE bapi_project_definition_ex,
      return               TYPE bapireturn1.
DATA: i_wbs_element_table         TYPE TABLE OF     bapi_wbs_elements,
      e_wbs_element_table         TYPE TABLE OF     bapi_wbs_element_exp,
      e_wbs_milestone_table   TYPE TABLE OF bapi_wbs_milestone_exp,
      e_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie,
      e_activity_table        TYPE TABLE OF bapi_network_activity_exp,
      e_message_table         TYPE TABLE OF bapi_meth_message.
DATA: wa_wbs_element_table    TYPE      bapi_wbs_element_exp,
      wa_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA: l_new_proj_no TYPE prpss-posid.
DATA: l_project_definition        TYPE bapi_project_definition.
DATA: l_project_definition_upd    TYPE bapi_project_definition_up.
DATA: l_project_definition_stru   TYPE bapi_project_definition.
DATA :l_pspnr      TYPE ps_intnr,
      l_pspid      TYPE ps_pspid,
      l_pro_def(9) TYPE c.
DATA :l_proj TYPE proj.
DATA :l_len TYPE i VALUE '0'.
DATA: lt_dd03l TYPE TABLE OF dd03l,
      ls_dd03l TYPE dd03l.
DATA: fieldname(50), fieldname1(50) TYPE c.
DATA: p_ddic_name(40), struc(40), fun_struc(50) TYPE c.
FIELD-SYMBOLS: <struc>, <c>, <sc>, <def_field> TYPE any.
DATA : i_method_project    TYPE TABLE OF bapi_method_project,
       wa_method_project   TYPE bapi_method_project.
DATA : l_index TYPE bapi_method_project-refnumber.
DATA : it_wbs_element_table         TYPE TABLE OF bapi_wbs_element,
       it_wbs_hierarchie_table      TYPE TABLE OF bapi_wbs_hierarchie.
DATA : wl_wbs_element_table         TYPE bapi_wbs_element,
       wl_wbs_hierarchie_table      TYPE bapi_wbs_hierarchie.
DATA : l_wbs_element_table_update   TYPE bapi_wbs_element_update.
DATA : i_wbs_element_table_update   TYPE TABLE OF bapi_wbs_element_update.
Get the project info of the Project 'C01.10995'
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
    input = 'C01.10995'
IMPORTING
    output = project_definition.
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
    project_definition     = project_definition
IMPORTING
    e_project_definition   = e_project_definition
    return                 = return
TABLES
    i_wbs_element_table    = i_wbs_element_table
    e_wbs_element_table    = e_wbs_element_table
    e_wbs_milestone_table = e_wbs_milestone_table
    e_wbs_hierarchie_table = e_wbs_hierarchie_table
    e_activity_table       = e_activity_table
    e_message_table        = e_message_table.
Automate the process the process to get the next number for the func module 'CN_SUCHE_FREIE_NUMMER'.
CLEAR : l_pspnr, l_pspnr, l_pspid, l_pro_def.
SELECT MAX( pspnr ) FROM proj INTO l_pspnr.
SELECT SINGLE * FROM proj INTO l_proj WHERE pspnr EQ l_pspnr.
l_pspid = l_proj-pspid.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
    input = l_pspid
IMPORTING
    output = l_pspid.
l_pro_def = l_pspid+4(5) + 1.
CONDENSE l_pro_def.
CONCATENATE 'C01.' l_pro_def INTO l_pspid .
function module to generate the nect free number between the given range.
CALL FUNCTION 'CN_SUCHE_FREIE_NUMMER'
EXPORTING
    search_imp = '2'
    prps_s_imp = l_pspid
    prps_e_imp = 'C01.29999'
    no_dialog = 'X'
IMPORTING
    prps_exp   = l_new_proj_no.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION'.
Get the New Project Number.
MOVE-CORRESPONDING e_project_definition TO l_project_definition.
l_project_definition-project_definition = l_project_definition-project_definition+0(3).
l_new_proj_no = l_new_proj_no+4(5).
CONCATENATE l_project_definition-project_definition '.' l_new_proj_no INTO l_project_definition-project_definition.
TRANSLATE l_project_definition-project_definition TO UPPER CASE.
MOVE-CORRESPONDING l_project_definition TO l_project_definition_stru.
Create the New project with the New project Number.
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
    project_definition_stru = l_project_definition_stru.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Populate internal table i_method_project for the bapi_project_maintain func module.
CLEAR : wa_wbs_element_table,wl_wbs_element_table,wa_wbs_hierarchie_table,
        wl_wbs_hierarchie_table, it_wbs_element_table, it_wbs_hierarchie_table.
CLEAR : wa_method_project, i_method_project, l_index .
l_index = 0.
LOOP AT e_wbs_element_table INTO wa_wbs_element_table.
MOVE-CORRESPONDING wa_wbs_element_table TO wl_wbs_element_table .
APPEND wl_wbs_element_table TO it_wbs_element_table .
wa_method_project-objecttype = 'WBS_ELEMENT'.
wa_method_project-method     = 'CREATE'.
wa_method_project-objectkey = wa_wbs_element_table-wbs_element.
l_len = strlen( wa_wbs_element_table-wbs_element ).
Setting Levels as reference number.
CASE l_len.
    WHEN '9'.
      l_index = 1.
    WHEN '12'.
      l_index = 2.
    WHEN '15'.
      l_index = 3.
    WHEN '18'.
      l_index = 4.
ENDCASE.
wa_method_project-refnumber = l_index .
TRANSLATE wa_method_project-objectkey TO UPPER CASE.
APPEND wa_method_project TO i_method_project.
CLEAR :wa_method_project, l_index.
ENDLOOP.
l_index = l_index + 1.
wa_method_project-refnumber = ' '. "l_index .
wa_method_project-objecttype = ' '. "'WBS_ELEMENT'.
wa_method_project-method     = 'SAVE'.
wa_method_project-objectkey = ' '.
APPEND wa_method_project TO i_method_project.
CLEAR wa_method_project.
LOOP AT e_wbs_hierarchie_table INTO wa_wbs_hierarchie_table.
MOVE-CORRESPONDING wa_wbs_hierarchie_table TO wl_wbs_hierarchie_table.
APPEND wl_wbs_hierarchie_table TO it_wbs_hierarchie_table.
ENDLOOP.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION' respectively.
CLEAR : l_project_definition_upd.
p_ddic_name = 'BAPI_PROJECT_DEFINITION_UP'.
struc       = 'l_project_definition_upd'.
fun_struc   = 'E_PROJECT_DEFINITION'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Update the fields of 'l_wbs_element_table_update' as 'X' for the fields which has values in 'e_wbs_element_table' respectively.
READ TABLE e_wbs_element_table INTO wa_wbs_element_table INDEX '1'.
CLEAR : l_wbs_element_table_update, fieldname1, p_ddic_name, struc, fun_struc .
p_ddic_name = 'BAPI_WBS_ELEMENT_UPDATE'.
struc       = 'l_wbs_element_table_update'.
fun_struc   = 'WA_WBS_ELEMENT_TABLE'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Append the value of l_wbs_element_table_update TO the table i_wbs_element_table_update for Bapi_project_maintain.
CLEAR i_wbs_element_table_update.
APPEND l_wbs_element_table_update TO i_wbs_element_table_update.
CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
EXPORTING
    i_project_definition       = l_project_definition
    i_project_definition_upd   = l_project_definition_upd
TABLES
    i_method_project           = i_method_project
    i_wbs_element_table_update = i_wbs_element_table_update
    i_wbs_element_table        = it_wbs_element_table.
   i_wbs_hierarchie_table     = it_wbs_hierarchie_table.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Please help me to solve the issue.

I am not sure why it is not working?? Try for any other alternate function modules.
But i see one issue with your coding, always check the return table message type and use commit work, instead of sy-subrc check. This fails for BAPI's

ORABPEL-05215 URI scheme is not "file". - Not able to deploy BPEL process

We are trying to deploy the Oracle Siebel PIP integration pack for Siebel OD. The SOA environment is clustered with a proxy and https enabled.
While deploying a BPEL process, we are getting the following error. Not able to figure out whats going wrong. Any help on this will be appreciated.
[deployProcess] Deploying process C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\output\bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar
BUILD FAILED
C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\build.xml:79: A problem occured while connecting to server "abcd.oracle.com" using port "11545": bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "CRMIntegSEBLODLeadConvertAsync" (revision "1.0"): URI scheme is not "file".
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:286)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:925)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:791)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:448)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Any body else is facing similar issue?
Thanks,
Bhavnesh.

We are trying to deploy the Oracle Siebel PIP integration pack for Siebel OD. The SOA environment is clustered with a proxy and https enabled.
While deploying a BPEL process, we are getting the following error. Not able to figure out whats going wrong. Any help on this will be appreciated.
[deployProcess] Deploying process C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\output\bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar
BUILD FAILED
C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\build.xml:79: A problem occured while connecting to server "abcd.oracle.com" using port "11545": bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "CRMIntegSEBLODLeadConvertAsync" (revision "1.0"): URI scheme is not "file".
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:286)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:925)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:791)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:448)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Any body else is facing similar issue?
Thanks,
Bhavnesh.

Not able to stop Universal Work Queue Server

Hello,
I have created a Server Group in the ICSM (Call Center HTML administration->ICSM->Server Groups) and it has all the server processes required for Interaction Center. I started all these processes and now am trying to stop them. I am able to stop all the server processes except the Universal Work Queue Server process. Whatever I do, this server just wont stop :-(. I tried stopping it using the HTML admin page as well as the ieoicsm command line.
I have another group and I need to start the UWQ server within this group. But it just wont start and I think thats because the UWQ server is running as pasrt of another group already. Both the server groups are associated with the same icsm node. I tried dissassociating the first UWQ server (which wont stop) from this icsm node, but I cant even do that. I cant even delete the server group as it keeps on saying that a server group which has processes runnig cannot be stopped.
Does anyone have a solution to this?

A restart of the application server solved the problem.

Not able to stop OPMN processes using OPMNCTL on AS 10.1.2.0.2

Similar Messages

Maybe you are looking for