Not all records displayed

hi guys,
i'm new in reports, my report has repeating frame the query returned correct result but the reports disply only one page with limited number of records although i set all frames to be variable in vertical elasticity
regards

Which version are you using ?
Are you seeing this in builder ? Builder shows only 1 page by default. Did you try clicking "Next page" ?
When you generate to html are you able to see correct output ?
When you create a report using reports wizard what are you seeing ? Are you able to see correct output ?

Similar Messages

  • Import not all records

    Hi, all!
    We use BPC MS 7.5 sp 06.
    We try import txt file. But not all records loaded.
    We checked tmp file that generated during Import and saw that all files that we try to import exceeds max 1,265 KB, and last record in this file not the same as in source file.
    And at all not all records imported in application and there isn't errors during Import.
    Does anybode know how to change this limit?
    Best regards,
    Iaroslav

    Hi,
    Once again, the number of records might not be similar in BPC and file. The reason behind this is the records might get aggregated while importing. Hence, you should consider this while comparing the data.
    Let me give an example to explain this scenario.
    Lets say below are the records in your file:
    ACCOUNT    ENTITY    CATEGORY    VENDOR    AMOUNT
    ACC1       ABC       ACTUAL      1234      1000
    ACC1       ABC       ACTUAL      5678      2000
    One you import the data, if your application doesnt have VENDOR dimension, then the 2 records will get aggregated and will be displayed as:
    ACCOUNT    ENTITY    CATEGORY    AMOUNT
    ACC1       ABC       ACTUAL       3000
    So, you see, the source file has 2 records. However, the application has only 1 record. So, the record count doesnt match. You wont even get any rejected count, because both the records from the file have been imported successfully. Its just that the records have been aggregated.
    Please note that the above example is just to show you how the records will get aggregated.
    Hope this helps.

  • How to read some records from a text file into java(not all records)

    hello,
    how to read text files into java. i need only few records from the text file not all records at a time.
    If any one knows plz reply me
    my id is [email protected]

    this snipet reads a text file line by line from line 1 to 3
    try {
                  FileReader fr = new FileReader(directory);
                  BufferedReader br = new BufferedReader(fr);
                  int counter = 0;
                  while ((dbconn = br.readLine()) != null) {
                      switch(counter){
                          case 0:
                            status = dbconn;
                          break;
                          case 1:
                            userName = dbconn;
                          break;
                          case 2:
                            apword = dbconn;
                          break;
                      counter++;
                  br.close();
        }catch(IOException e){
        }

  • I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    have you tried rebooting your computer?

  • Filtering in excel - not all options display in drop down list

    I have found an issue with the filter drop-down list in Excel 2010. I have now been upgraded (by my employee) to Excel 2013 and same problem still exists.
    Problem: I highlight the row containing the column headings; then click on filter (available via the Home tab); then click on the down arrow in the column of interest (in this case "Council Names" column); the drop-down window appears but not all
    council names are displayed in the selection list, even though those council names are still in the list. I am aware of the 10,000 option limit with the selection list, but my spread sheet has well under 10,000 rows (unless there is something hidden that I
    do not know about).
    I have found work-arounds for the problem by searching google for answers to similar problems. I have also spoken to my employee's IT HelpDesk. I will explain the work-arounds I have found below. However, my main concerns now are:
    (1) What is the cause of the problem? Is there are better fix that addresses the cause, rather than having to use work-arounds?
    (2) Is the issue an indication that the spread sheet has been corrupted in some way? - I need assurance that this is not an indication that the spread sheet is unstable and such problems could multiply or already be existing. (The reason I ask
    this is that I had an earlier version of the same spread sheet where the problem did not occur, but it appeared in a later copy - could the copying of the sheet/workbook have caused the problem?)
    Workarounds found:
    (1) Select the entire sheet, then select the filter button in Home tab
    (2) select all the columns manually (click in top left cell and drag down until all data selected), then select filter button
    (3) Ensure all rows in the column of interest are filled in, then select filter button
    I would really appreciate any answers/assistance.

    Hi Jan,
    Thank you very much! Yes you are right - I have looked at the Current Region and the Council Names within that region match those in the filter list. The Current Region does not contain the entire sheet.
    [By the way - there were some errors in my original post: employee should be employer and in my description of the problem the following should read
    "...even though those council names are still in the spread sheet". I assume that this would not change your response?]
    Further questions
    (1) It is odd, though, that an earlier version of the same spread sheet had a complete list of council names (the current range on this sheet contains all of the required rows of the sheet). How did the current region change between versions (I did not knowingly
    do it)?
    (2) Does the above mean that the file, workbook or spread sheet is damaged/corrupted in some way? If yes, can this be corrected and how?
    (3) In addition to (2) above - what is the safest way to copy an excel workbook to minimise risk/avoid future corruption? [I have been copying and keeping earlier versions, partly for testing reasons, but also as a safety measure for the project as
    we are making changes all the time and may decide we wish to go back to the previous version(s)].
    Regards and thanks again,
    Bea Rogers.

  • Execute query. Not all records retrieved.

    Hi everyone.
    I have made a screen with the data block and layout wizzards.
    When I click on the default toolbar "Execute query" it brings only 68 records and there are about 25,000!.
    I have a botton which displays a LOV of the same table and the LOV is working well, it brings all the records in the table.
    Any idea ???
    Thanks!

    If you go to the bottom of the query, does
    it get the next set of records??
    Oracle forms buffers the records it gets
    based upon the number of records buffered
    in the "block properties".
    Go to block properties. Look at Number of
    records buffered. If you want it to get
    ALL records. Set the Query ALL records switch
    to "Yes". Try it again.
    Hopefully this helps.

  • Urgent: Not all records extracted to ODS

    Hi,
    Not all of the records I am trying to load get updated to ODS. Ex:
    Doc#     Item#     Created On     Debit/Credit
    1000     1     02012007     540
    1000     2     02012007     540
    1000     1     02022007     -540
    1000     2     02022007     -540
    These 4 records appear as 2 records in ODS as:
    1000     1     02022007     -540
    1000     2     02022007     -540
    When I do simulate update it shows me 4 records till communication structure. But from communication structure to ODS it they come in only as 2 records. There is no routine in update rules it is just direct one to one mapping. I am having this problem for records with same line item # within a document. Please advice how to solve this issue…
    Thank you,
    sam

    I personally don't think there would be a requirement to load two line items the way you mention; if that is the case there should generally be some record number also coming in with the data. The data example you gave doesn't look right/complete to me somehow.
    Anyway, you can get the record no in many ways. You can create a number range object in the system (check Txn SNUM), and you can then use standard functions in your code to get the next no (I think you can check functions NUMBER_RANGE* in se37 to get an appropriate one). Or you can always read the MAX() no stored in the ODS in this field and start from there in your routine (likely not as robust as the first option).

  • Not all records shown for selection - CR 2008

    I have a crystal report that has dynamic record selection. The selections are set to allow multiple, allow discreet, allow ranges.
    When I run the report I am not shown all records on the file to choose from.
    The file has approx 6000 records. Does anyone know of any limitations? The file I am writnig report for is from Item Master in SAP.  Thanks.

    There is a registry entry that limits the number of records shown in a list of values (LOV).  The default value is 1000.  The registry key is Crystal reports version specific.  You should be able to find the key by searching the forum for LOV 1000 or similar...
    HTH,
    Carl
    Moderators:  This question comes up once a week, it seems.  Maybe we should "pin" the answer to the top of the forum board?

  • Vision M - Not all music displaying in creative Media Explo

    When i connect my Vision M to my PC and go into creative Media explorer not all the artists are displayed in the drop down list, i can find them when i go into Creative Media Organizer though..does anyone have any suggestions as to why this would be

    Thanks - I've already tried to reinstall the software and there is no update in the download section of microphoto for the Media Explorer.

  • Not all records are updated in DSO

    Dear Friends
         My Scenario is SAP - FM -> DataSource -> InfoPackage -> DTP ->Transformation - > DSO.
         I have 896 Records in my PSA , but when I run DTP to load the data in DSO only 817 records are added, rest records are not updated.  I have supplied
    Purchasing organization             0PURCH_ORG
    Purchasing Group                      0PUR_GROUP
    Vendor                                      0VENDOR 
    BW: Document Number              0DOC_NUM
    BW: Document Item Number      0DOC_ITEM
    Material                                    0MATERIAL
    Accounting document number    0AC_DOC_NO
    Item in Material Document         ZZEILE
    as key fields of DSO.
    can you suggest me what could be possible reason for not having all the records.
    Regards
    Naim

    Hi,
    is it full load?
    Have you applied any filters at dtp level?
    if its full load then delete whole psa data and dso data.
    reload them again and see the count.
    As per dso primary keys, same combination data will over write it.
    how many records count you see at dso-->manage-->request tab
    Added and transferred.
    Thanks

  • Disable few record in a table control not all records

    Hi 
    I have an internal table of   6 rows with table control .first field char 1 (ws_flag) which I am using for line selection of row in the table control .
    I have to disable some rows in a table control (user can not select or deselect it).
    I don’t want to disable all rows . I just want to disable some rows depending upon the condition .
    Loop at screen doesn’t seem to be working .
    I already tried the below given code .  how does Screen-name = column name this will besatisfied in  a table control.
    Set screen attributes for table control
      loop at zzhb6_0100 with control zhb6ctl
                        cursor zhb6ctl-top_line.
        module modify_screen_0100.
      endloop.
    Then:
    module modify_screen_0100 output.
      loop at screen.
        if screen-name = 'ZZHB6_SAL_PHASE2_S-ZZMERIT_AMT'.
          if zzhb6_sal_phase2_s-zzself_funded = 'X' or
             zzhb6_sal_phase2_s-zzmed_rec     = 'X' or
             zzhb6_sal_phase2_s-zztr          = 'X'.
            screen-input = '0'.                       "Display
            modify screen.
          endif.
        endif.
        if screen-name = 'ZZHB6_SAL_PHASE2_S-ZZMERIT_AMT_SP'.
          if zzhb6_sal_phase2_s-zzself_funded = 'X'.
            screen-input = '0'.                       "Display
            modify screen.
          endif.
        endif.
      endloop.

    When using table control, chances are you have some code like this in the screen flow logic of the screen.
    PROCESS BEFORE OUTPUT.
    * PBO FLOW LOGIC FOR TABLECONTROL 'I_WOODCAPCON'
    * MODULE I_WOODCAPCON_CHANGE_TC_ATTR.
    * MODULE I_WOODCAPCON_CHANGE_COL_ATTR.
      LOOP AT   I_WOODCAP
           WITH CONTROL I_WOODCAPCON
           CURSOR I_WOODCAPCON-CURRENT_LINE.
        MODULE I_WOODCAPCON_CHANGE_FIELD_ATTR.
      ENDLOOP.
      MODULE STATUS_0300.
    Notice the MODULE I_WOODCAPCON_CHANGE_FIELD_ATTR. in the above code, this is the module which will allow you to change the attributes of the cell per row.  Notice that this MODULE is inside the LOOP statement in the PBO flow logic.
    So here is the coding for the module.
    module i_woodcapcon_change_field_attr output.
      modify i_woodcap index i_woodcapcon-current_line.
      loop at screen.
        if i_woodcap-level = 'B'
          and  screen-name = 'I_WOODCAP-PDATE'.
              screen-input = '0'.
        endif.
         modify screen.
      endloop.
    endmodule.
    Notice here that my condition statest that if the LEVEL value for the row is "B", then I want to make the PDATE of the row "not ready for input".   'I_WOODCAP is the name of the internal table associated with the table control.
    Help this helps.
    Regards,
    Rich Heilman

  • Shifting images between projects - not all are displayed

    So I'm importing say 2000 images into a new project, call it Project 1. Obviously I can't archive 2000 RAW files in one project on a DVD, so I create additional projects and end up with Project 1A, Project 1B, Project 1C, Project 1D etc, each one about the right size for a DVD burn when I've finished with the images.
    I've learned from experience to let all the previews generate before shifting images; if I don't the thumbnails sometimes get mixed up and image 200 shows the thumbnail for image 457. Bit weird, but fixable.
    What I haven't found a solution to is the way that these new projects will sometimes only show 60-ish% of the images that have been moved to them. The images are there, but when I scroll down to the scroll bar limit, I've only got about 2/3 of the way through the images. If I click back to anothe prroject and come back to the problem project, sometimes it will display correctly, sometimes it takes a few tries.
    Does anyone have any ideas on what's causing this, and how to stop it happening again? It's not a big problem, but I'd like to solve it. I could import set volumes of images into new projects, but importing once and then shifting works much better.
    Thanks.

    Thanks Ian,
    Now that you mention it, I get the same problem with my Save As dialog box; I'm given the list view minus scroll bars, but every time I use it. Must inform the Captain...

  • When I login to Outlook Exchange for office email not all emails display. I use Safari on a home Mac. My PC at work shows all emails in the inbox

    This problem started a couple of months ago. I only receive about 25% of my inbox when I login remotely to the webmail exchange account. My inbox on my office PC is fine but the emails do not display in my inbox when I login to the webmail exchange account.
    THis happens on other Mac computers, not just my personal computer at home. It's the same thing when I login from my gym

    Does the Outlook Exchange client is up-to-date?

  • Images not displaying at their normal size, and not all keywords displaying, why?

    Not sure what's going on inside Adobe Bridge CC 2014.1, but why is it that my images are not displaying at full size. Bridge says they're displaying at 100% but I know that's not the case, because when I open the same images in Mac OS Preview (OS 10.10.1 Yosemite) at 100% they're much bigger. Is there a viewing preference setting I'm missing?
    Also, I use Bridge and Photoshop on two mac pro desktops: one at my office and one at home.
    At work, I created more than 30 keywords in Bridge for several hundred images that reside on my external thunderbolt hard drive. But when I take that hard drive home and connected it to my home mac and then open Bridge, only a handful of keywords appear. I don't see the full list of keywords that I created at work. But in Bridge, I didn't see any option to save or export keywords as a file.
    Although the image metadata does appear, because whatever keyword i assigned to an image at work does display on the home mac, I just don't see the entire keyword list.
    Can or should Bridge therefore only be used on one computer? Is it not possible to transfer the entire Bridge keyword list from one mac to another?
    Thanks in advance for any help feedback with this.

    Hi Zenos,
    I've discovered what is causing the problem, but I still need a way to fix it, if possible.
    The cause of the problem is that in Windows 7 Control Panel > Display I have set the size of "text and other items" to 150% (otherwise everything is much too small too read on my screen's recommended resolution of 1920×1080).
    I discovered that Irfan Viewer was also displaying at the incorrect resolution, but I managed to solve that problem by right-clicking on the IrfanView.exe icon and following Properties > Compatibility and selecting "Disable display scaling on high DPI settings".
    I tried the same procedure with Thunderbird, but it made no difference. It is still displaying at the incorrect resolution.
    Any suggestions?
    Regards,
    Catsix

  • Master - some records : Detail - for only a few i(not all)records in master

    Hi
    I have a requirement like master and detail. However I do not wish to see the details of everything that is there in the master but only a few records (based on some criteria). Example:
    Id Desc Col3 Col4
    1 1 desc 1col3 1col4
    2 2 desc 2col3 2col4
    3 3 desc 3col3 3col4
    id col5 col6 col7
    3 abc def ghi
    4 4 desc 4col3 4col4
    How can I have such a layout in which detail shows details of only selected records present in the master?
    Any help appreciated big time.
    Thx!

    1. create two queries. master and detail and link on the fields of interest.
    2. on the layout, have repeating frames. one for the master and inside the master frame, a repeating frame for the detail.
    hope this is what you are looking for..

Maybe you are looking for