Not all steps transported to other system

Hi,
I'm facing a strange problem :
I did some changes on a workflow in the dev-environment. After testing it, we executed the transports to implement the changes on the test-environment.
But the changes I have done aren 't implemented on the workflow in test !
All newly created tasks are transported, but the new steps in the wf are not created.
Apparently, someone did a change directly in test and activated the workflow there.
Can this be the reason ? If so, can someone explain me how I can get the version from dev to test ?
Recreating steps on test is not an option, I want to make sure that everything goed with a transport (otherwise, I have to do the changes on the live system also..)
thanks for the help !

Hi Jasper,
thanks for the suggestion, but I tried that already. The new version isn 't transported at all.
It's really bizarre.. I found a note on sap.com, but I'm not entirly sure it will solve my problem...
it 's note 967392...

Similar Messages

Interface is successfull but not all steps.

I have imported an Interface from Repository A to Repository B. After this it's executing successfully in Repository B but not all steps. Due to this, the target table is not populating. Here is what I did.
1. Created a master repository MA and work repository WA
2. Developed the interface.
3. Run the interface. It's working properly. See the snapshot at
http://www.flickr.com/photos/uday_sunrise/478322469/
4. Exported everything from here to files.
5. Created a master repository MB and work repository WB
6. Imported all the exported files in step 3 here in Synonym INSERT_UPDATE mode.
7. Run the interface. It's completing successfully(without errors), but not completing all the
steps. Due to this my target table is not populating.
See the snapshot at http://www.flickr.com/photos/uday_sunrise/478322473/
Please help where is the mistake.
Thanks,
Uday

Take care of these things while you Import the Interface from one Repository to another.
1.) u follow the import step wise
First import the physical schemas.and map them to logical schame with samename and context as in previous repository.
Then,import the models in designer that are to be used in your interface.
Finally Import the Interface.One Important Thing to mentio here is that any mapping(in Diagram Tab) in an Interface needs to be done again.
Your Screenshots are not visible .

Not all Test Transports Imported

I have run into several instances where a transport tied to a change request has been released before a generated test transport could be created and imported into the test system. Once this occurs the generate test transport action will not execute from within the Change Request for an associate transport that is already released.
My issue is that I need to progress the Change Request from a status of To Be Tested to Consolidated, but this action will not set without all test transports having been imported into the test system (ala generated test transport). Is there a way to override this requirement where a transport was released before a generated test transport was created per my above scenario?
Edited by: Kevin Richman on Nov 17, 2009 1:40 PM
Edited by: Kevin Richman on Nov 18, 2009 9:30 PM

Kevin,
When an action within ChaRM is executed, several conditions are checked.
In the standard process, the condition IMPORT_OF_COPIES_OK is activated on a specific status.
You can eliminate this condition from your process if you like. Go to the IMG of SolMan and search for 'Assign Conditions to Status Values'.
Best regards,
Roel

Transport type when copying transports to other system

Hello,
probably a simple question. I have to transport couple transports from one system to another, there is no link between the systems.
I have created one (mass) transport which include objects of these transports, but I am not sure what type of the transport should I choose (transport of copies, relocations (it is not clear to me)), also I do not want to release the one big transport to Q systems transport queue. I just want it to create the cofiles to move to other system.
So question will be how to copy this one transport (via cofile, data file), or if it is possible to release transport without target system?
Thanks in advance
Martin

Hi,
Please ensure that STMS is configured in your system, since it is a stand alone system you can make it as a Domain Controller also. After that goto transaction se10 and check for the transaction which are in modifiable state. Then relese the transport starting from the inner request corresponding the transport request created by you.
Note that once you release this trasaction data files and cofiles are created in trans directory, and you have to manullay copy these files to the system in which you want to transport these files.
After that goto transaction stms_impot in the target system and add this transport request and import it. the data in the transport reuest will qutomatically gets imported the.
Thanks
Rattandeep

Not able to connect to other system

Hi All,
Currently have two Solaris 10 servers connected via a dumb Hub. I'm unable to ping either box but they can ping themselves. I have double checked physical connections and the following files;
/etc/hosts - verified that all devices are listed correctly
/etc/netmasks - Verified that network and netmask was correct
/etc/defaltrouter - deleted file as there is no router
/etc/resolve.conf - xxx.xxx.xxx.xxx listed as name server
/etc/nsswitch - removed dns from "host" line
/etc/inet/ipnodes - only local IP listed
Verified that correct NIC is enabled with ifconfig -a
also
The Hub has lights but no traffic/flashing lights is occuring
Plugged in each server by themselves, still no flashing lights
The HUB does have power and is switched on, The only switch is the uplink/normal toggle switch. (currently set for normal)
The Hub is a 8-port 3Com hub

Hi
Thanks for the reply and sorry for the delay...!
the following is the output of system "A" (hostname is "sunshine")
sunshine# ifconfig a
lo0:flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
elxl0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500index 2
 inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255
 ether 0:1:2:9e:ee:77
sunshine# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
192.168.0.0 192.168.0.1 U 1 0 elxl0
224.0.0.0 192.168.0.1 U 1 0 elxl0
127.0.0.1 127.0.0.1 UH 4 195 lo0
==============================================
the following is the output of system "B" (hostname is "home")
home# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
192.168.0.0 192.168.0.2 U 1 0 afe0
224.0.0.0 192.168.0.2 U 1 0 afe0
127.0.0.1 127.0.0.1 UH 3 12 lo0
home# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
 inet 127.0.0.1 netmask ff000000
afe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
 inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255
 ether 0:0:e8:f6:f5:22
hear my systems are not connected to internet, i have connected them using a 8 port hub
in the system 'A' entries in /etc/resolve.conf file is
named 192.168.0.1
in system 'B' entries in /etc/resolve.conf file is
named 192.168.0.2
thanks
regards

DD07T Table entries- Transport to other systems

Hi All,
I am trying to change the desc of short texts for a domain in DD07T. Iam successful in changing the desc and save the values. However, while saving it didnt ask for transport request. And when I try using the option - Tranport entries - It throwed me an error - system entries cant be transported directly and given some tips hpw to do the same.
For DD07* table we need an entry in request as R3TR DOMA.
I created a request and tried adding the domain entry manually. However, I got an error saying - Repaired objects cannot be included in dev./correction <TR Number>
Anyone has clue on how to do it?
Thanks & Regards,
Swarna Munukoti

Hi,
Please go to SE16N,
Give the table name
Press Enter
In the transaction code bar enter '&SAP_EDIT' and press enter.
SAP editing function is activated.
now click on execute.
The table will open in EDIT mode. But, please make sure that you are editing correctly the totals.
1. Use SE09 to
Either create a new workbench request
or goto the old request (Objects Tab)
2. Press Edit button
3. Enter the following in the row:
Prog Id = R3TR
Obj Type = TABU
Obj Name = MyTableName
Then Press ENTER
4. A Key Button will come on the Right column.
Press it. A New screen will come.
5. In table name enter : MyTableName
In Table Keys enter : KeyFields*
Save the request and transport.
Hope it helps.
Prabhudas

Need Applying Note 1422843 steps for my SAP system

Hello,
My company have an SAP netweaver 7.0 and when i check in system status sub-window and disp+work i got 221 level patch of the kernel and non unicode system, i read the note 1422843 and i want to apply it but i need a confirmation of steps i have to run following the note : 
1-i use SE38 to create a report in the package SPOO with the name RSPO2010, in the header of that report i past the text from
 the note in the "Seletion texts". 
2-I apply the note via transaction snote then i run that report 
3- I update the kernel with the suitable (bellow) patch attached obtained from the part SP Patch Level of the same note : 
SAP KERNEL 7.00 64-BIT SP238 000238
4- i restart the SAP system.
The note link : https://websmp230.sap-ag.de/sap(bD1mciZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1422843#PL
thank you for your help.

Hello,
About The point 4 (
Apply the latest kernel patch level 236, and then apply disp+work patch level 244 (the latest).
), when i follow the download link of kernel patch suitable to my release (SAP KERNEL 7.00 64-BIT) in the note 1425811 (related to the note 1422843) i have two choices with different packages :
1) SAP KERNEL 7.00 64-BIT -> AIX 64bit -> #Database independent, this list offers this packages :
 A) SAPEXE_236-20001020.SAR Kernel Part I (for Basis 7.00)
 B) dw_239-20001020.sar disp+work package
 C) dw_245-20001020.sar disp+work package
2) SAP KERNEL 7.00 64-BIT -> AIX 64bit -> ORACLE, this list offers this packages :
 A) SAPEXEDB_236-20001021.SAR Kernel Part II (for Basis 7.00)
Please i need to know What packages to apply? and i need to understand while the note refers only to the kernel patch how did you know that the disp+work package also must be applied?
Edited by: NetMed on Mar 6, 2010 9:49 PM

Transporting variants to other systems

Hi
This is kind of a basis issue, I have a report transported to Quality ( and to production). Now i have to create a variant in Development server and transport it to Quality (as i do not have rights to create variants directly over there).
I understand that in case we have named the variants CUS&<variant> , it gets transported to other system along with the report.
Now the scene is , my report is already in production, and i have to supply the variants from development server.
Revert at the soonest.
Regards
Alok Pathak

Hi Alok,
You can create the varinat in the dev system & tie it to a Transport Request using the standard Program RSTRANSP.
Regards,
Suresh Datti

Delivery 0080000276 is not relevant for transportation planning.

At the time of (delivery related) invoice creation, system throws a message "check the error log".
Log says:
" Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
            LongText
                Detail
                 Diagnosis
                     Copying control for billing requires that shipment costs
                     are copied from the shipment belonging to this delivery.
                     No shipment costs could be determined, because this
                     delivery is not relevant for transportation planning.
                 System Response
                     The system assumes that no shipment costs are to be billed
                     in this case.
            Technical data
                Tech. data details
                 Client                                 251
                 Group Number
                 Sales Document Number                  0080000276
                 Item Number of the SD Document         000010
                 Schedule Line Number                   0306
                 Counter in Control Tables              00
                 Message Identification                 VY
                 System Message Number                  306
                 Output Type                            I
                 Message Variable 01                    0080000276
                 Message Variable 02
                 Message Variable 03
                 Message Variable 04
                 Group Type                             F "
Please advice if anyone have any idea for this error log.

Error Log 0080000276 000010 Delivery 0080000276 is
not relevant for transportation planning
It is not necessary to assign the Transportation Planning to Delivery type. Only recently, I completed a similar configuration and running successfully for a client. The issue is because of your copy control VTFL. For more information, check note 713171.
thanks
G. Lakshmipathi

Health app not showing steps and calories

It's about 5 days that the health app is not showing steps, calories and other data which was showing before. I have added two data source to provide data for health App and both them are provideding data.

I take it you have already gone into the Health app and set up your Medical ID card, correct?
The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
It does not show up anywhere if you do not have a passcode lock on the screen.
Cheers,
GB

Import steps not specific to Transport Request

Hi all,
I need to move 5 Released Transport Request as "Local Change Requests" to another SAP installation.
I followed two guides to do this:
SAP BASIS / ABAP - How to Export and Import an External Change Request - YouTube
How to copy Repository Objects between non-connected SAP systems - ABAP Development - SCN Wiki
However I have problems creating the Change Request that contains all my requests: if I generate it as Local Change Request it is not available on cofiles and data folders.
So I created a new Virtual System called M02 and I created a standard consolidation transport link between my original system M01 and the virtual system M02.
Then I created a new TRANSPORT OF COPIES Transport Request and I selected as target system M02. All objects are correctly added to the new request and the validation is correctly performed.
However when I release the request on the SOURCE server I get the following error:
M01#######            My Request Name
M01        System M01
             Checks at Operating System Level         05.03.2014 16:48:34    (0) Successfully Completed
             Pre-Export Methods                       05.03.2014 16:48:37    (0) Successfully Completed
             Export                                   05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
M02        Virtual System
             Selection for Import                     05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
"Import steps not specific to transport request" expanded as:
Feedback after export or import 05.03.2014 16:48:48    (0) Successfully Completed
I get this message even if I generate the new Change Request from a single Change Request (the first one that we released).
The cofiles and data files are correctly generated, however the IMPORT on the TARGET server returns an error (invalid data package)
My question is: is the "Import steps not specific to transport request" message correct, or should I modify something? Why am I getting this message?
Thank you

Hi Chinna,
Its a warning message you can ignore that... if you want to see what exactly the reason for warning in SE09 --> select the released request --> click the Transport Log Ikon --> select the warning message and click the spects Ikon --> go on expanding you can find the warnings of Objects in Yellow...
Hope this helps,
Sudhakar.

Generating transport for report to set it up on other system

hi friends,
how can i package a report i wrote with the corresponding ddic-tables that are needed in a convenient way so i can send it to somebody and it can be imported into their system and be executed easily ?
thanks,
clemens

There are two ways to do this:
1. Create a transport request for the report, copy the same from the \usr\sap\trans directory into a cd and send it across.
2. Download the report (Utlities > More utilities > Upload/Download > Download) into a txt file, send that across. The developer on the other system will need to upload the file into a new report and save it. Note: All includes in the report will need to be downloaded separately.
Sudha
Message was edited by:
Sudha Mohan

Exact Steps to Generate Installation keys for other systems In SolMgr4.0

Hi friends,
Please provide me exact Steps to Generate Installation keys for other systems In SolMgr 4.0 SR1.
I have steps to make this thing in solmgr 3.2 as please change as it in solmgr4.0 sr1
txn SMSY
Expand Landscape components -> Systems
Right click on Systems ->New System
Type SAPID, & Installation No. (S44 , 0040099252) & sAVE
Expand Newly Added system
Right Click & Create
Now we can use the key provided by the system.
Please make required changes as applicable in solmgr4.0 So that I can proceed.
Also clear vat is the difference between ECC & ERP as solmgr4.0 mention both as two systems.
Thanks & regards
Jaswant
+91 9949676055
Cheers 'N' Joyce

Hi Jaswant,
to generate a Solution Manager Key you can process a little bit easier.
Call transaction SMSY, press shift+F5 (you get the "other objects" popup).
As System enter the SID of your Solution Manager.
->select gen.Installation/Upgrade Key (shiftctrlF10))
then you get a new popup. In this popup you DELETE all values, enter SID of the new system, the message server of the new system and the system number of the new system. Then press generate key.
With this procedure you do not have to add the system to SMSY to generate the key.
Later you should add it to SMSY, maybe you have added an SLD to SMSY then the system will be added automatically. If not you have to add it manually.
Second question ERP <> ECC
Good question, ECC is part (a main instance) of ERP, so it is up to you if you classify your system as an ERP or ECC.
Regards,
Udo Lang

Mac Pro will connect to internet but not network with other systems

I have an iMac in my studio reception and a Mac pro and Macbook in my office. All three systems can connect to the internet but the Mac Pro has stopped networking with the iMac. However the iMac can network with the Pro. I have an ethernet cable connection to the Pro (no wi fi card) and I have a wireless router on the iMac which has enabled me to connect the Pro to other systems through wi fi. I also have a PC laptop and the Pro can connect to it via wi fi. Everything was networking properly several weeks ago and as far as I am aware I have not changed any settings. Does anyone have any suggestions on how to resolve this annoying little problem.

Hello there, WoodenToy.
The following Knowledge Base article offers extensive troubleshooting steps for troubleshooting your issue:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Although the entire article is a great resource you may want to focus on the section entitled: "Symptom: My Mac does not connect to the Internet".
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Not able to access weblogic console to other systems .

Hi All,
I am working on two project so I am using JDeveloper 11.1.1.4 and JDeveloper 11.1.1.7 .
For my usage I provide different port no for web logic servers .
11.1.1.4 version JDeveloper have the PortNO 7101 .
11.1.1.7 version JDeveloper have the PortNO 9101 .
In local I can Run the two Jdeveloper applications at the same time but
My problem is ,
For testing I am able to access http://127.0.0.1:7101/console/login/LoginForm.jsp URL to other systems .
But I am not able to access http://127.0.0.1:9101/console/login/LoginForm.jsp URL to other systems .
In log it's showing ,
<Logger> <error> ServletContainerAdapter manager not initialized correctly ..
How to access different port no web-logic console to other systems ?
Thanks ,
David ..

Hi All,
I resolved my issue by following below steps ,
Goto ->Weblogic Console ->Home ->Default Domain -->Control -->Default Server -->Remove the data from Listen Address field .
Now I can using two JDeveloper with different web-logic port no and the target URL can access from other systems .
Thanks ,
David .

Not all steps transported to other system

Similar Messages

Maybe you are looking for