Not getting any line item, while doing shipment costing VI01.

I have a TD shipment which is completely confirmed. When I am trying to do shipment costing, VI01, no item line appears. The error log is not informative.
The same vehicle, with the same service agent, has been used for many other shipments, before and after the one I have mentioned. In those cases there was no problem with the shipment costing.
Can anyone let me know what may be the possible reason for this ?
Regards.
Manish kumar Sharma

Hi Manish,
i hope the Shipment Cost Relevance and Default for Shipment Cost Type is assigned properly, and while using VI01. the same s being used.
Also check  "Maintain Transport relevence in Shipments.and "Route determination for shipping point" for the vehicle / transporter used .
BT
Satish

Similar Messages

  • Not getting any item while doing shipment costing VI01.

    I have a shipment which is completely confirmed. When I am trying to do shipment costing, VI01, no item line appears. The error log is not informative.
    The same vehicle, with the same service agent, has been used for many other shipments, before and after the one I have mentioned. In those cases there was no problem with the shipment costing.
    Can anyone let me know what may be the possible reason for this ?
    Regards.
    Manish kumar Sharma

    Hi Manish,
    i hope the Shipment Cost Relevance and Default for Shipment Cost Type is assigned properly, and while using VI01. the same s being used.
    Also check  "Maintain Transport relevence in Shipments.and "Route determination for shipping point" for the vehicle / transporter used .
    BT
    Satish

  • When I cllick on my device(ipod) in itunes, i do not get any menu items.  I am trying to sync my ipod.  It says it is synching but doesn't.

    Using Windows 8, recently installed Itunes 11.  Just tried to download a cd and synch it to Ipod and it doesn't work.  I clicked on my device (ipod) in Itunes and didn't get any menu choices.  How do I synch music from itunes to ipod?  Also, music purchased that was on ipod is still on ipod but not on the computer.  How do I get purchased songs on the computer?

    Sync works the same way it always has, connect the device, select the content desired to sync and sync.
    All the media should be in iTunes already, iDevices are not and have never been backup devices.
    If this is a new computer, move the content from the old computer to the new computer.

  • Line item report on secondary cost element (cat - 21)

    Hi Gurus,
    Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
    Please clear this doubt. thank you

    Hi Mohit,
    I hope you can have line item report @ order and WBS element stright away...
    for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
    same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
    Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
    I hope it helps a lot if I understand your query right
    Regards..
    Jose

  • Not only do web pages not load properly but we're doing calculus on-line and only 1 video can be viewed at a time. last week we didn't have problem. wish i could call someone. not getting any help.

    a number of site say done and we see a blank page. on-line calculus class, last week could view more than 1 video at a time now only 1 can be viewed. this course need to be completed by may 3. career builders some of the drop downs aren't working. need to find a job. these are serious errors that we did not experience before. we haven't updated to 4.0. now i see the one's who have are having these problems. daughter can't gt to e-mail. wish i could talk to someone. i'm going to try the live session at 2 but i'm not a techy. can take care of most problems, but this seems beyond me. HELP
    s

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • Document 4500016031   does not contain any selectable items

    Hi Friends,
    I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
    ME5J----->(Entered my Proj. defn---> executed
    Select material T-20610.
    Click the "Assign automatically" pushbutton.
    Assign materials T-20620 and T-20630 the same way.
    Display the overview of the assignments and then create the purchase order.
    Click the "Assignments" pushbutton.
    The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
    Place your cursor on the line below vendor "C.E.B.".
    Click the "Process assignment" pushbutton.
    Confirm the first dialog box by clicking the "Continue" pushbutton.
    If another dialog box appears, click "New purchase order".
    The purchase order appears.
    On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
    Click the "Copy" pushbutton.
    Save the purchase order.
    Click the "Save" pushbutton.
    The purchase order number appears in the status bar.
    Make a note of the order number:   ____4500016031________
    Now I got the PO as per above procedure Now While I am doing  MIGO---Goods receipt am getting the below message.
    Any pointers is appreciated and will be rewarded.
    Document 4500016031(PO)   does not contain any selectable items                                                                               
    Message no. M7064                                                                               
    Diagnosis                                                                               
    The document or document item entered cannot be adopted.                                                                               
    Possible reasons for this are:                                                                               
    o   The document items have already been processed                     
            (Suggest zero lines indicator set?).                                                                               
    o   the document items have been deleted or are blocked.                                                                               
    o   the document items have been created for a different plant.                                                                               
    o   (for reservations only) movements are not yet allowed for the      
            reservation items.                                                                               
    o   (for reservations only) the document items are retrograde components 
         of the order. These are posted using the order confirmations.                                                                               
    o   A confirmation must exist for the document items.                                                                               
    o   The document items must be released first.                                                                               
    o   The document is an R/2 document.                                                                               
    Procedure                                                                               
    Make sure your entries are correct.                                                                               
    o   If the system has already processed the total quantity, you can set  
         the Suggest zero lines indicator. The system will suggest the        
         quantity zero for the items that have already been processed.                                                                               
    o   If you have entered a particular item, cancel the item. If you do    
         not enter an item, the system searches all of the open items in the  
    o   If the document is a purchase order, production order or a            
         reservation, you can enter search criteria in the dialog box.         
         You access the dialog box by choosing Enter with reference on the     
         initial screen.                                                                               
    o   If the document is an SAP R/2 document, you have to cancel it         
         manually by entering the reversal movement type.                      
    Regards

    Hi
    Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
    vIVEK

  • Currency conversion - Line item total does not tally with account balance

    hi guys!
    we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
    1. while trying to run program RFSEPA02 the following error is appearing-
       -Line item total does not tally with account balance
    2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
    3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

    put a break-point @
    if t_balance_items_hw[] <> t_balance_account_hw[] or
         t_balance_items_tw[] <> t_balance_account_tw[].
        perform dequeue_account.
        message e099.
    *   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
      endif.
    endform.                               " CHECK_ACCOUNT_BALANCE_2
    and debug y it is getting the error.
    Short text
    Switch On Open Item Management by Changing Master Record
    Description
    This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
    Requirements
    No items can already be archived from this account.
    Caution: Company policy must be in place to ensure that this does not happen.
    Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
    Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
    The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
    Output
    When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
    Regards
    Prabhu
    Message was edited by: Prabhu Peram

  • Migo cannot be done " PO does not contain any selectable items"

    Dear SAP Gurus
    We have a very urgent issue, while trying to do MIGO for a particular standard PO.
    Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
    The accounting document which is created when the down payment is done can be seen in the purchase order History.
    Please suggest soem solution
    Thanks
    kk

    Hi Kavitha,
    Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
    Try this, if unresolved revert back.
    Reg,
    Ashok
    Assign points if useful.

  • J1IEX post than made error like does not contain any selectable items

    Respected Sir,
    We have purchase the Goods From SEZ unit and it wil be treated as import made.
    We doing the following activities
    1. Prepared the Import P.O.
    2. released the same P.O.
    3. Doing the MIRO for Custome Vendor
    4. Capture the J1iex
    than we fins the below mention ERROR & Diagnoses and ERROR
    Document 4400000016   does not contain any selectable items
    Message no. M7064
    Diagnosis
    The document or document item entered cannot be adopted.
    Possible reasons for this are:
    u2022     The document items have already been processed
    (Suggest zero lines indicator set?).
    u2022     the document items have been deleted or are blocked.
    u2022     the document items have been created for a different plant.
    u2022     (for reservations only) movements are not yet allowed for the reservation items.
    u2022     (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
    u2022     A confirmation must exist for the document items.
    u2022     The document items must be released first.
    u2022     The document is an R/2 document.
    Procedure
    Make sure your entries are correct.
    u2022     If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
    u2022     If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
    u2022     If the document is a purchase order, production order or a reservation, you can
    Kindly doneedfull above mention error
    Thanks & Regards
    Bipin Shah

    HI,
    Please check whether all the vendor and excise details have been maintained in J1id.  i.e Excise rate maintainance.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful

  • Order does not have any selectable item .

    Hi Experts ,
                              I am trying direct production scenario where I have assembly with SPK 50 and ( PT : E) . I have converted planned order for header material and automatically prod order is created for assembly also  . For assembly I procured material and after MIGO ( GR ) stock is updated .  But while doing Goods receipt in MB1A ( MT 261 ) for assembly production order system showed message order does not have any selectable item .
    I confirmed the assembly order but stock is not reducing ( No goods issue happed for assembly ) .
    I guess, in direct production we need not to do goods issue for header material ( or higher assembly ) but what about the lower most assembly ? I think we have to do goods issue for lower assembly ( that is procured raw materials ) .
    Regards
    Neal .

    Hi Neal,
    I Hope ur using collective order concept, 
    In a collective order, goods movements (GI & GR) are usually not required for assemblies that are directly produced.
    When u do the confirmation for Lower level order, Produed assemblies will be issued to Higher level order directly, so manual goods issue  not possible for   assemblies to Higher level order.
    U can confirm this, with Higher level order cost analysis after the confirmation of loer level order.
    So need not issue the produced assembly to higher level order using the MB1A.
    Only thing u have to activate  Collective order with goods movements  cjech box for Order type at OPJH .                     
    For Lower level  order  (Assembly order ) good issue for   procured components of assembly  can be done using MB1A with MVt type 261.
    I hope this will clear ur doubt if yes , Reward and close.

  • Document does not contain any selectable items

    Respected Gurus!!!
    The following error popped up while trying to capture excise invoice. The allocation was with reference to purchase order / scheduling agreement.
    "Document does not contain any selectable items"
    Here are the other relevant details:
    1. Material has been "chapterised!!"
    2. Excise details have also been maintained for the vendor.
    My issue is:
    Why is it that when I  am trying to find the purchase order before doing a goods, this error comes up?
    I wish to directly do a "capture excise invoice" without a goods receipt.
    Seeking help gurus
    Jaideep

    Hi,
    First you have to post a goods receipt then capture & post Excise invoice using J1IEX.
    Or you can post Excise invoice manual without referecne of purchase order.
    But ideally you have to capture & post Excsie invoice after Goods receipt only where as only in case of Import you have to capture duties before GR through planned delivery cost using MIRO and after Godds receipt you can post the Excise invoice.

  • My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

  • I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    # Question
    I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Audigy 4 Pro - I/O Hub does not get any po

    Hello all,
    I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
    This somewhat sumarizes what I tried so far:
    . Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
    2. Also removed all entries of the old soundcard from Device Manager
    3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
    4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
    5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
    6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
    7. Connected the larger AD_Link to the card, then to the hub
    8. Connected the smaller AD_Link to the card, then to the hub
    9. Finally connected the power convertor cable to a free systems power unit
    0. Double-checked the entire hardware setup a few times and power the PC back on
    . Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
    2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
    3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
    4. Rebooted PC after prompting to do so.
    5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
    I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
    6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
    7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
    8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
    9. Uninstalled and reinstalled the drivers and applications: Same problem
    20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
    2. Set my BIOS to factory defaults: Same problem
    22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
    23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
    Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
    Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
    Thanks in advance!
    PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
    Message Edited by HilTek on 07-05-2005 :04 PM

    Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
    Thanks
    John
    AMD Athlon(tm) 64 FX-57 Processor
    A8N-SLI Premium
    NVIDIA GeForce 7800 GTX
    GB RAM
    WIN Pro x64

  • How user can get a Sales Text for the any Line Item in the Billing?

    Salute Masters ! !
    How user can get a Sales Text for the any Line Item in the Billing?
    It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
    Where I can configure in system for all.
    Rgds
    Srivastav
    09973504950

    Hi,
    Sales text can be copied from customer to order , order to delivery and delivery to billing .
    Check the T-code : VOTXN , do the customization as per your requirement.
    check the below link :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

Maybe you are looking for