Not getting hd quality

Setup using Airplay from new ipad and I'm not getting HD quality picture on my HD TV

I'd imagine you are one of the very many who are experiencing the same problem which is being reported on this thread:
https://discussions.apple.com/thread/5565870?start=1110&tstart=0

Similar Messages

  • Not Getting the Quality You Expect From the Adobe Media Encoder?

    If your Premiere Pro CS5 project is set up to use Mercury Playback Engine GPU Acceleration (affectionately known as Hardware MPE), then there is some important information you need to know about the AME.
    During a Direct Export from Pr, Hardware MPE automatically uses the same scaling and deinterlacing algorithms that are invoked by selecting Use Maximum Render Quality in either the Sequence Settings or the Export Settings.  However, if you queue the exported sequence in the AME, there is some un-accelerated scaling that occurs after Pr hands off the sequence to the AME.  That un-accelerated scaling is affected by the Use Maximum Render Quality option.
    So although a Direct Export from a Pr project that is using Hardware MPE will produce the quality results you expect without having MRQ selected, that's not necessarily true for a queued export from the AME.
    Bottom line: even with Hardware MPE in use, it may be necessary to select Use Maximum Render Quality in the Export Settings dialog to get the best quality results when the export is queued in the AME.  Unfortunately, this will also greatly increase the time required for the export.
    -Jeff

    I'm seeing my final color corrections not taking effect if I export via AME, but if I Export within Premiere instead of queueing it out to AME, the color is saturated and as expected.  For this export I'm using H.264, basically a VimeoHD setup.
    Of course, the export of a 4-minute 1080p piece thru Premiere is ~35 minutes compared to 13 minutes via AME, plus I have to walk away from editing while it consumes Premiere.
    Any ideas what is causing this visual discrepancy?

  • Master data is not getting displayed in the Report in Quality

    HI Experts,
    I have ZESP_Num as master for my transaction data.
    I have loaded the data in the Development and designed and checked my report. It is working fine.
    But after moving it to Quality. My report is not getting the master data.
    When I try to do right click manage ZESP_Num.
    I'm getting message like this.
    The data from the InfoProvider ZESP_NUM involved could not be checked
    Message no. DBMAN242
    Diagnosis
    A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
    Can anyone plz help me.
    Thanks

    Hi,
    Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
    Hope helpful.
    Regards,
    RAO

  • User Exit not getting Triggered in Quality Server

    Hi,
    In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
    which is getting triggered in Development server.But when I moved it to Quality,
    The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
    and that in turn is assigned to Project, still the problem persists.
    Can any one suggest me what could be the problem.
    Regards,
    Kiran B.

    Kiran,
    Check the <b>Project</b> of that enhancement is active or not. not the enhancement.
    <b><REMOVED BY MODERATOR></b>
    Satish
    Message was edited by:
            Alvaro Tejada Galindo

  • Pricing Routine is not getting called after transport to quality

    Hello,
    We have created a new routine under Condition base value formulas. We have done all the required settings so that it is called while creating / changing sales order. Our routine is working fine in Development server but after transporting it to quality it is not getting called. We can see the routine in VOFM but in debugging mode the system is not able to find the routine.
    Can anybody please tell me what setting is missing in quality?
    Thanks in Advance.
    Priyanka.

    HI,
    Pls ececute this report RV80HGEN in SE38 tcode then only the routine will works for first time.
    Regards,
    kishore.

  • Not getting request in quality server

    hello Gurus ,
                           I created a sap script in developement server , and release it in
    quality server . I fergot request number and description . We have restore data from production server to developement server , now i am not getting released request list in developement .
                          I want to forward my request to production , please cooperate me .
                                                                                    Your Thanking
                                                                    Shrikant Ambulkar

    Thanks for your prompt reply , problem has been solved , i got that request number .
                                                                                    Regards
                                                                                    Shrikant Ambulkar

  • Badi is not getting called in IC Web client in Quality server

    Hi Experts,
    I have implemented a badi CRM_SERVICE_CONTRACT which determines contract based on component no. in complaints.
    My badi is working fine in development server in IC web client but in Quality server the badi is not getting called in IC Web client.
    The badi is active in both the servers.
    Please let me know what configurations to look into.
    Regards,
    Sangeeta.

    Hi,
    Did you try to debug till the point where the BADI is supposed to get called? You may set a break-point in your Dev system to check the call stack and based on that set break-points in your QA system and see why this is not getting called?
    Also, check all the implementations of the BADI got transported to the QA system. Check if there is any filter on that badi.
    Regards
    Prasenjit

  • Group title in Floor plan manager is not getting transported to quality

    HI Experts,
    In Component Configuration "EHHSS_INC_REC_NRM_QAF_V3_BSCI", I have added group and gave title to that group in development.
    The group is getting transported when I release request but the title is not getting transported.
    Could anyone help me, it's urgent.
    Thanks and Regards,
    Santhoshi.

    posting again,
    Can anyone help me as this is urgent requirement.
    With Regards,
    Santhoshi

  • Delta Records is not getting updated in delta queus when changes done

    Hi All,
    In Quality system , when a user makes a change to an order's ship-to address, the changes are "triggering" a delta record into the delta tables for BI to extract. This can be seen via tcode rsa3's delta tester.
    In Productionn System, when the user makes the exact same change, nothing is added to the delta table and the changes never come over to BI unless a full extract is request for the order.
    Why changes not getting updated, please give your inputs.
    Thanks & Regards,
    Venkat Vanarasi.

    Do you have your V3 update job active and running? THis job wites changes to the delta queue. Of course your datasource has to been initialized and a delta queue should be setup. You can check it in RSA7.
    Regards,
    Juergen

  • Quantity is not getting conformed in sales order

    HI SD Gurus,
    i have one issue we are not able to solve i need your help, it is very urgent,
    My issue:we created sales order but quantity was not getting conformed is sales order even though we have enough stock
    but it was consumed the stock in MD04,
    we ran the SDRQCR21 program but issue is still exist,
    1. we checked all the ATP configuration  every thing is fine,
    2.we replicated the scenario in  quality it is working fine
    3.we try simulated in production but not conformed the stock
    4. total stock is in unrestricted only
    5. no block in sales order
    6. same material working fine with different plant
    7. in same plant different materials working fine
    available stock level in MMBE and MD04 is 330 qty unrestricted
    sales order created for 165
    then stock reduced in MD04 to 165,and sales order displayed in MD04 with quantity 165
    but it was not conforming the schedules in sales order(with any dates)
    I am requesting you to reply ASAP if any one faced the same scenario
    BR,
    CS

    Hi CS,
    Please check the stock availability in CO09. If CO09 shows available quantity as zero then the sales order quantity cannot be confirmed.
    Please review SAP Note Number 89362 - No confirmation despite available quantity/stock for further information on this transaction.
    You will also find further information in this document:
    http://scn.sap.com/docs/DOC-58040
    I hope this helps.
    Kind regards,
    Catherine

  • Alert is not getting triggered in QA

    Hai Experts!
    i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
    Pls help me to solve this issue.
    Regard's
    Preethi

    Hi
    Schedule send job
    please see as
    help.sap says
    Send Job
    E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
    i.         Choose View ® Jobs.
    ii.       If no other job has been scheduled, choose Job ® Create.
    iii.      Enter a job name and confirm it.
    iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
    v.        Choose Schedule Job.
    vi.      Choose Schedule periodically.
    vii.     Select the interval you require, such as 10 minutes.
    viii.   Choose Create.
    Refer this.
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

  • Inconsistency between R3 and APO. - not getting reconciled in CCR or CPP.

    Hi,
    We have a PO that is not getting reconciled in CCR and CPP.
    it give the message
    Unit of conversion from H to KG for the Product "ABCD"  is not possible.
    this PO has 3 products and off which only one is not getting reconciled. rest two are showing correctly in APO and R3.
    The conversion is not maintained in material master for the rest for the two products also....
    i have a similar set up in my quality environment. i tired to change the PO with some qty and it refelcts in APO immediately..
    Any idea on where the conversion is not happening correctly???
    Thanks
    Aswath

    Hi,
    Have u activated detailed application CIF log. Can you check the error details in APO using t-code /n/SAPAPO/C3 or in ECC using t-code CFG1.
    Can you also try to send the queue using /n/SAPAPO/CPP. CCR will show no error only when there are no queues in SMQ1 or SMQ2 of both the systems and also no queue pending in postprocessing.
    Best regards,
    Vaibhav

  • Application not working in Quality, which was working fine in Dev. Urgent!!

    Hello Guru's,
    We are experiencing a problem in portal.
    Issue: We customized application in MSS( General Information which calls FM in the backend to populate the data) using NWDS and deployed the application into Development System and it's working fine. so we used NWDI to transport the code into Quality and the application is not working fine in Quality. The Issue is when transported the application into Quality it is not showing any data. and when checked the RFC trace it is not showing any FM been called when accessing the application. And also when checked in NWA it is not showing any error, when checked the JCo connections they are working fine.
    Anyone please help us out. It's very Urgent.
    Thanks in Advance.
    Regards,
    Pramod
    'Points will be awarded for sure for helpful answers.'

    Hello Harini,
    Thank you for the reply, and I was expecting answer from you. Was seeing other forums and your replies to those .
    Anyways Let me tell a little more on the issue:
    We are implementing ESS/MSS in portal as per the req. we need to create a custom iview with employee details. And for that we have created a FM which will pick up the data and we are accessing that Function Module in WebDynpro application.
    We deployed the code into QA and Prod In prod it is working fine but in quality it's giving 500 Internal Server Error
    when checking the log file we are not getting any error logged. and checking in the R/3 whether that FM is executing when accessing the application using ST05 tcode it is not showing up the RFC trace either.
    And Configuration of QA is same as Prod and all the permission are properly assigned.
    Just wondering how is a application responding differently in different landscapes.
    Looking forward for a solution.
    Appreciate your time and help.
    Regards,
    Pramod

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

  • Web dynpro with adobe integration is not working in quality system

    Hi Experts,
       We have developed a web dynpro component with adobe flex integration. In development system everything is ok. Now the object moved to quality. In quality we are not getting the landing page. I checked in debug mode that the control come into SAP and code got executed. Finally the message which is issued from SAP is displaying in the page but the remaining page is blank. What reason might cause for this defect. If any one faced same kind of issue earlier. Respond to my request if you know the answer.
    Cheers,
    Bujji
    Moderator Message: Webdynpro have their own forums. Please post your question there.
    Edited by: kishan P on Sep 13, 2010 5:35 PM

    Hi Romero,
    Ur guess is correct, i have investiagte in the system, the variants saved a  $tmp, thats why it is not migrated.Later i migrated the variants. Now it is perfectly working. Thanks for the inputs.. Sorry for the delay response.
    Thanks
    surendra

Maybe you are looking for