Not one of the possible agents WS12300111

This issue is very similar to the one described in following thread, although I already tried all the hints in that one:
Dynamic Action.
I have defined the wf as a general task as described in the other thread and I even put me and my entire org. unit in the agent selection screen. Still when I request an absence from the portal view I get the message that I am not one of the possible agents of the workflow.
Now, I tried to view the workflow log to find errors but to my surprise the worklfow has not even been started at this point?!
Can anyone help me out here? It does not make sense to me anymore.

Hi Mike
The error message corresponds to the workflow I select in PTARQ under customizing so at least I think it does try to start it. Then again - anything is possible at this point
I read that I could use any user with SAP ALL but should preferrable stick to WF-BATCH. I'll change it back.
I think this problem is getting weird. I'll take your advice and try again tomorrow and hope for the magic SAP goblin to do some trick overnight
I'll be back if it does not work. Thanks so far.

Similar Messages

  • Error: You are not one of the possible agents of task 'WS99900032'

    Hi frnds,
        I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
    Can anyone give me solution to solve it?
    thanks,
    Suganya.

    You are not one of the possible agents of task 'WS99900032'
    You need to refresh the  organizational environment and then execute the workitem
    1. First make the workflow tempalte as General task and then
    Goto PFTC ---> enter the workflow tempalte number by selecting workflow template  ---> open in display mode and on menu Addtional Data ---> agent assignment  ---> Maintian ---> select General task
    2. Goto SBWP  -
    > Seetings  -
    >workflow settings -
    > refresh ornozational environment and then try to execute the workitem

  • Unable send request, you are not one of the possible agents

    Hi,
    I am trying to configure workflow  for leave request, for my requirement i have to do some modifications to stadard workflow(12300111), so i copied it and made configuration settings in spro also, but when i create a leave from PTARQ transaction
    workflow is not getting created.
    when i debugged it, i got amessage saying 1) unable send request 2) you are not one of the possible agents
    Is there any other stting i have to do??
    Thanks,
    Krish.

    Hi Kishore,
    Please check below things.
    1. In the SPRO, have you maintained your workflow Template against the required leave type.
    2.Use CTRL + F2, and check is there any error in your workflow. Also check whether it is active or not.
    3. Check the workflow agent assignment in Basic data. It should be General Task.
    Thanks.

  • You are not one of the possible agents of task 'WS20000081'

    Hi,
    I need to trigger the workflow WS20000081 using the service. This workflow gets triggered by 'Create Leave Request' service which is in ESS.
    To test the above said workflow, I need to execute the service WS20000081 in R/3. But when I execute this service from Service User log-on, it throws an error as follows.
    <b>You are not one of the possible agents of task 'WS20000081'.</b>
    Even after I changed the task assigment as 'General Task', it keeps giving the same error.
    Please suggest me how to solve this problem.
    Regards,
    jey

    There are agents assigned for a task in the workflow.The same role has been assigned to my user id.But it does not work
    I saw in Debug that it tries to execute the Method 'EXECUTE' in the Class CL_SWF_RUN_WORKFLOW_START..which checks for authorization internally.
    I never know why this is failing.
    I checked in another box which is upgraded to ECC .
    There inside the Method Execute it takes a parameter m_task->properties-general = 'X'
    and TCLASS = 'NO_CLASS'.These r passed to the authorization check which succeds there.
    But in this system m_task->properties-general  = '  ' and Tclass = '  '.
    Can anyone pls suggest how to go abt this.

  • ESS- Leave : You are not one of the possible agent for the task ws9021212?

    Hi ,
    I have copied the standard workflow template wa12300111 and assigned the new template in the customizing. When i apply leave from ESS working time , it says an error " You are not one of the possible agent for the task ws9021212? " .
    The similar kind of Error i have solved before in by making the workflow as GENERAL TASK in PFTC as follows.
    PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "ws9021212" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
    i have cleared the buffer also!
    BUT STILL I AM GETTING THE ERROR ?
    Please help me !
    Richard A

    hi Richard
    Try to do this way.  IN the workflow builder there is a button with hat. that is basic data. click on that and  it will go to another screen and u can find a apple button that is agent assignment for a task click that.
    It will open maintain agent assignment screen. click the text below that and click the attribute button and click the genral task. i think this will solve ur issue.
    If helpful kindly reward points
    Regards
    vijay

  • ESS leave request workflow WS04200009...error-u r not one of the possible a

    hi all
    i m working on ESS leave request workflow WS04200009....but when i create a leave request from user's A/c i got an error at that leave req create screen that's-- u r not one of the possible agent of the task...
    pls do help if anyone no solution.
    thanks in advance .
    Raj

    Try making this task a General Task..use tcode PFTC and change the attribute of this task to a general task. That might help solve the issue.

  • ESS - ws01000109 - You are not of the possible agents of the task

    Hi
    When I try to cancel leave using workflow ws01000109 it is raising message
    "You are not of the possible agents of the task ".
    Can any body tell wheather we have to maintain data in pa30 transaction for this problem.
    I have seen so many thread regarding this But I have not got any answer please reply for the same
    I have set all tasks as general task only.
    Edited by: balaji ramadas on Jun 8, 2009 4:01 PM

    Hello,
    You would be better off starting your own thread, and I hope that unlike the poster above you will share the result when you find a solution.
    Has your task been set to General Task? If not, try that.
    regards
    Rick Bakker
    Hanabi Technology

  • Hi people, can anyone tell whether one has the possibility in numbers, the entries in the pop-up menu to sort alphabetically me

    hi people, can anyone tell whether one has the possibility in numbers, the entries in the pop-up menu to sort alphabetically me

    Hi Dieter,
    Your profile shows Mac OS X (10.6.8) so it seems you are using Numbers version 2.x
    Numbers 2 does not have the ability to sort Pop-Up Menu entries (except by a painful process of adding or subtracting entries in Inspector).
    Numbers 3 makes Pop-Up Menus a breeze. But it is your choice whether to update to OS X Mavericks and Numbers 3 . Some features have been lost, other features have been added, and there are some workarounds.
    Have a look at these threads before you decide:
    Features that Apple has promised to reinstate:
    http://support.apple.com/kb/HT6049
    Hints on workarounds here:
    https://discussions.apple.com/message/23622372#23622372
    What has been GAINED in Numbers 3 is here:
    https://discussions.apple.com/thread/5473882?start=75&tstart=0
    What has been lost in Numbers 3 is here (with corrections where Apple has already reinstated some lost features in the Numbers 3.0.1 update):
    https://discussions.apple.com/thread/5470448?start=240&tstart=0
    Regards,
    Ian.

  • PDF is not one of the options under in the print dialogue

    When I try to print the document (save) as a pdf it is not one of the available options under print dialogue. I have my printer, fax, and something called Microsoft XPS document writer. I can't find any instructions on how to load it. It is an available option on all my other programs.

    You would find that option under File menu > Save As... > Photoshop PDF
    Since Photoshop has its' own PDF format, Microsoft's PDF (and Apple's too) option is not there in the Print dialog unlike your other programs.
    So there is nothing wrong with your print setup, it's just the way it's done in Photoshop.

  • How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    Hi mujabee1111,
    Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
    Download CS5 products
    Regards,
    Sheena

  • HT4623 When I go to settings General, software update is not one of the options. Now what do I do to update  my phone?

    When I go to settings>General, software update is not one of the options. Now what do I do to update  my phone?

    Read the entire article.
    Not just the first part.
    It tells you how to update via itunes:
    Learn about iOS: How to update your iPhone, iPad, or iPod touch 

  • Function to get the Agents for the Workitem not the possible agents

    Hi Guys ,
    To get the user for each scienario we saved it in the ztable. Now i want to show in report the list possible agents assigned to workitem. ts should agents asigned to it ... its can be four or five ....

    Try to make use of the FM SAP_WAPI_GET_WI_AGENTS, if at all you want to know the agents with respect to a workitem
    and
    check the below too
    SWL_WI_DISP_ACTUAL_AGENTS     
    SWL_WI_DISP_EXCLUDED_AGENTS   
    SWL_WI_DISP_POSSIBLE_AGENTS   

  • HT5772 How do you delete a movie from a local computer without deleting it from the library?  This should be such a simple procedure, but it's not. And while we're at it, why is iTunes NOT one of the dropdown product choices?

    All Apple support says about deleting movies from a computer is that you "should" be able to re-download it if you live in the right area.  Well, I'm in the U.S.A. and just deleted one of the movie extra features exactly as described in the support directions.  According to Apple I should be able to re-download this from the cloud at any time, but now I no longer even see the title listed.  That's why I wanted to test their support statements with a Movie Extra instedad of a real movie.  This should be the simplest of tasks to manage, yet they make it extremely difficult.  Why?  I own the movies and I want them to stay in my iTunes library basically forever.  Makes sense, right?  But, I only have so much room on my laptop to store movies that I want to have with me on long trips, etc.  So if I only have the space to store 3 or 4 movies on the disk, shouldn't I have the ability to every once in a while delete one of those movies from my local computer ONLY, NOT my library, so that I can download a different movie?  Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.  So why does support say you can download again any time from the cloud then?  The worse part is, the calamity doesnt stop there.  Wait until you see the message you actually get once you say that yes, you do want to delete the movie (but only because you assume that you really can download it again sometime).  Here is the exact 2 messages you get from Apple, in the same popup box.
    Do you want to move the selected movie to the Recycle Bin, or keep it in the iTunes Media Folder?
    Only files in the iTunes Media Folder will be moved to the Recycle Bin.
    [Cancel]  [Move to the Recycle Bin]  [Keep File]
    Is that the most confusing popup or what?  Who develops this kind of software?!?!?! 
    I have tried it both ways and the only difference is that the file shows up in the Recycle Bin or doesn't.  But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.  Better hey, if I clicked "Keep File", where is it?  I can't see it anywhere, so where is it kept and what can I actually do with it?
    I have to be honest, I love my iPhone and some of the neat features, but when it comes to iTunes, I have never seen a more difficult piece of software to use in my life... and I'm a software developer.  Your Support documentation is actually more confusing than the softwae itself, it's almost as if you don't want people to use the software, just simply buy stuff and listen/watch it, but nothing else.  Seriously, this is the most cumbersome, unfriendly piece of software I've ever seen.  What does it say about Apple iTunes when everyone has to google solutions for how to do something rather than using Apple support documentation.
    Seriously disappointed in Apple iTunes and it's never really gotten any better over time.  This is one of the primary reasons I have never moved all of my recording studios and office operations over to an Apple platform.  Hardware and phones are awesome, but your software is either grossly incompetent or intentionally designed to make it all but impossible to use.  Either way, it's worthless to me. We're talking about software that does nothing else but manage media that I already own on multiple devices.  That should be one of the simplest things in the world to do.  Sad... very sad.
    While we're at it.... why isn't iTunes listed on the product dropdown below?  Maybe it's not even considered a product, which would explain it's goofiness I guess.

    I own the movies and I want them to stay in my iTunes library basically forever.
    But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
    iTunes prefs > Store > Show iTunes in the Cloud purchases.
    This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
    Also see this , -> Download past purchases
    and techncially, you don't "own" the movie, You simply have a license to use it.
    Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
    Actually, no it does not tell you that.
    FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
    Suggestions here -> http://www.apple.com/feedback/

  • Memeber server in a domain connected with external trust. The agent operation failed, DPM could not communicate with the DPM agent. Error ID 270

    I manually installed the agent on a member server in a domain (domainB) that has an external trust with the domain the DPM 2010 server, mydpmserver.domainA.int,  is in.
    I pointed the agent on myprotectedserver with setdpmserver -dpmservername mydpmserver.domainA.int
    I successfully ran attach-productionserver.ps1 in DPM Management Shell.
    When I click refresh in DPM 2010 Administrator Console/Management/Agents I get error id: 270
    The agent operation failed on myprotectedserver.domainB.int because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
    If myprotectedserver.domainB.int is a workgroup server, the password for the DPM user account could have been changed or may have expired.
    I can ping myprotectedserver.domainB.int from mydpmserver.domainA.int
    DPM 2010 backup of the domain_controller.domainB.int works fine.
    The application log on myprotectedserver.domainB.int does not show any DPMRA related event logged.
    The firewall on myprotectedserver is off.
    Computers in domainA and domainB use their own networks connected through a router.
    from mydpmserver
    net view \\myprotectedserver.domainB.int /all - successfull
    sc \\myprotectedserver.domainB.int query  OpenSCManager FAILED 5, Access is denied
    wmic /node:myprotectedserver.domainB.int OS list brief Error 0x80070005, Access is denied
    from domaincontroller.domainB.int:
    sc \\myprotectedserver.domainB.int query  successfull
    wmic /node:myprotectedserver.domainB.int OS list successfull
    Any suggestions on how can I fix this?

    Hi
    I know this is old but are you still having a problem?

  • Good day, I would like to use my macbook pro to install windows 7 and it seems it requires a "backup disc" There was not one in the box when I bought this unit. Where can I purchase one? Thx.

    Hello, I would like to use my Macbook pro computer to be able to use windows 7. There are references to using a backup disc that has an apple logo on it. I did not receive one when I bought this computer. Does anyone know where to purchase or get one of these discs? Thx

    You need to have a backup disk drive before you ever make changes to your system; to the partitions and hard drives. Most users at a minimum use TimeMachine to backup their system to an external disk drive, which a WD MyBook Mac 2TB are about $99.
    There is a forum for Windows on Mac, aka "Boot Camp"
    https://discussions.apple.com/community/windows_software/boot_camp?view=discussi ons
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    For more information about using Boot Camp, please visit www.apple.com/support/bootcamp
    forum for MacBook :
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions

Maybe you are looking for