Not relavent for Picking

Hi,
1) After Sales order When I am trying to create delivery its automatically showing
ITEM NOT RELEVENT FOR PICKING.
2) Its not taking Quantity,
But item isrelevant for picking,
Plz can you suggest me
thanks

Tiru,
Check the storage location under which you found the Stock and see whether the delivery is pointing to the same storage location or not..
If possible try to add the stock into the storage location of the plant that the delivery is pointing to..
I hope this should resolve your issue..
Regards,
Ajai
Don't forget to reward points if helpful.

Similar Messages

  • Set  item categaries of sales order  is  not  relevant for picking

    dear friends:
       when i created the outbound delivery and must maintain the picking quantity of materails.i change the configration of system so that not nessesary maintain the picking quantity. set  item categaries of sales order  is  not  relevant for picking via t_code:vlop,what it effect .help me analyze it .
    best regards.

    Hello,
    In TA :OVLP   set/reset the indicator according to your requirement.
    In the case of outbound deliveries, only the delivery items that are relevant for picking are transferred to the Warehouse Management (WM) component. Certain items such as text items or service items (consulting activities) are not relevant for picking.(in those cases uncheck the box)
    In the case of inbound deliveries, this indicator controls whether the item is relevant for putaway.
    This indicator must be set in order for the item to be included in a Warehouse Management transfer order and then put away.
    Regards,
    Nisha
    @award pts if helpful.

  • VL06G  item not relevant for picking

    Hi Gurus,
    I have a delivery with a single item that is not relevant for picking and I cannot see it in VL06G.
    I don't understand why.
    In the selection screen the report WS_MONITOR_OUTB_DEL_GDSI has picking status 'C' or Blank.
    So it should display also my delivery, that has picking status = blank
    Thanks for your kind help
    Francesco

    Hello Francesco
    I don't know which version of SAP you are in.
    However I found an OSS note that's relevant upto Version 4.6C, which says the following:
    " However, it is not possible, for example, to include the picking status ' ' (Not relevant) in the selection, because this represents an enhancement of the standard selection range. ".
    I am thinking it may still work the same way as it is a conceptual matter.
    Please review this
    398014 - VL06: Selection criteria for delivery statuses
    I will check if there is a note relevant for ERP 6.0 which says the same thing.
    Hope this helps. Good luck.

  • Item Cat NLN appears not relevant for picking even it is relevant in 0VLP

    Dear Expert,
    We have an issue in on the behavior of the item category we assigned to the replenishment delivery. The transaction starts from an STO-PO and create a replenishment delivery on the background via VL10B. The replenishment delivery was successfully created. The weird thing is, item cat NLN is relevant for picking. I checked the item cat assigned to the replenishment delivery and it shows NLN but it appears as not relevant for picking as picked quantity column is uneditable. Seems weird and this is my first time to encounter such issue. I tried browsing the net and had no luck to find same scenario. Can somebody please tell me what could be the possible cause of this issue? Thank you in advance!
    Kind regards,
    Mark

    Mark,
    Is the inventory warehouse managed or inventory managed? Usually, if you are in an inventory managed scenario, the system lets you directly input a picked quantity directly on the delivery. If you are in a warehouse managed scenario, you have to create a transfer order to do picking. You can check this by looking at field "OverallWMStatus" on the "picking" tab of the delivery. If the status says "WM Transfer Order required" you are in a WM managed scenario and have to carry out picking via a transfer order.
    More information here.
    Otherwise, I am not sure what the issue is!
    Krishna

  • Materials not relevant for Picking

    Hi Guys,
    I have an outbound delivery wherein some of its materials don't have any value for the picked quantity and the materials' picking status says that they are not relevant for picking. Do you guys have an idea on how can I fix this issue??
    Thanks!

    HI,
    As per your above thread, I understand that your delivery has multiple line items with different materials.
    Check whether any of the material is relevant for picking. If yes, then compare the sales views of the materials which are relevant for picking with the ones which are not.
    Hope you can find some differences.
    Also check the transaction 0184 & OVLP.
    Thanks & Regards,

  • Item is not relavant for Billing:

    Dear experts,
    I need your input on how to avoid creating billing document (Credit note) without delivery and PGI for Returns Order? i have customized all possible ways but still am not succeeded. I checked copy controls, chnaged the Item category (relevant for delivery related billingand) so on...
    But finally stuck at ..........when we try for billing (after completing the PGI) "Item is ot relavant for Billing" system give this mesage.
    Please show me the wayforward.
    regards,
    S Kumar

    Hi
    Item not relevant for billing means there can be only two possibilities
    1 In Correct Billing relevance in item category in VOV7
    2. In Correct Copy control configuration
    There cannot be a third mistake So we need to check these two only
    I need your input on how to avoid creating billing document (Credit note)
    without delivery and PGI for Returns Order?
    This is returns scenario and the standard billing relevence for REN item category i think is B that is order related billing
    (I am not infront of SAP system now to check the correct one But my inputs will be definately helpful to you )
    Change the billing relevance to A in VOV7 for REN
    In VTFL define copy controls between LR delivery type to RE billing type
    This you define the same as LF to F2
    That is copy controls in VTFL between LR to RE should exactly match what is there between LF to F2 at header level
    copy controls in VTFL  at item level REN should also exactly match TAN
    Note LF to F2 at header level at VTFL and TAN at item level are already available in standard
    The same you copy and that will solve your issue
    Changing the billing relevance to A for REN and defining correct copy controls between LR to RE in VTFL  at header level and for REN at item level will solve your issue of avoid creating credit notes without delivery and PGR completed
    Regards
    Raja

  • Language Translation is not working for Pick slip Report (XML)

    Hi All,
    I have to translate the Oracle Pick slip report(XML) in other language. So I export and upload translation file for different language but still it is taking default english template. It should refer the translation file but it.s not working. Could you please suggest me if I am missing something?
    Thnaks,
    Joohi

    Hi,
    Looking for some help on this.
    Thanks in advance!
    Venkat

  • Order not ready for pick up second time

    yesterday i bought a macbook for store pick up because i need it for travel and work. 3 hours went by and i never got the prduct released because the bridge decided to sit on it even though customer service said all was clear. i had to cancel order. today i gave best buy a second chance and its been 3 hours and i still have been heald up again. this is really making me never want to buy from best buy again nor recomend it.

    Hi there Ebiasaf1983, 
    When making a purchase for travel and work, it can be a bit nerve racking to ensure you get it in time, especially if you are leaving soon for your travels! Generally speaking, our Store Pickup option is the perfect option in such a situation as you can place the order and have it ready for you when you get to the store.
    I'm sorry to hear that your MacBook order may have been taking longer than you anticipated to process so that our store may fulfill it. It is discouraging to hear that this led you to cancel your order, and that you encountered a similar experience when you decided to try replacing the order. Using the email address you registered with the forum, I was able to see that you were able to pickup your order last night. If you should need any further assistance, please let us know! 
    Regards, 

  • Item relevant for picking

    Where we can can control relevance for picking , despite making all the settings (In the item category and LW M) it is showing that item is not relevant for picking in the delivery?
    Regards
    Roopak

    Hi Roopak,
    First goto T.Code:VOV7,Select your order item category.Details.
    Check whether it is relevant for delivery or not.
    If yes then Goto T.Code:0VLP(Zero VLP),Select yourdelivery item category.
    Details.
    Under Warehouse control and Packing tab,there is check box for Relevant picking.
    Check this box.
    Save.
    The same you can do in OVLP also.
    Here it is direct check box.
    You can use either of them.
    Save.
    Regards,
    Krishna.

  • Configuring printer for pick list

    Hi All,
    please let me know how and where do we configure the printer for a pick list.
    thanks in advance for your help.

    Hi Friend,
    The printer configration will be done not only for Pick list, it will be for PACK LIST, invoices, ORDER CONFIRMATIONS, DELIVERY NOTE,
    For any activity we need to configure the printer in Spool Administration via the transaction code
    SPAD.
    Please revert back if u need any further clarification,
    santosh

  • People picker is not working for ie11 but working fine for other lower version

    i am using sharepoint 2010 and windows authentication
    recently i have updated my ie to ie11 and problem goes here.
    when i try to select from people picker, there are an unexpected error happened 
    however when i use other ie version, people picker work fine, what goes wrong?
    i have already added my system as trusted site
    if there any others thing i miss out?

    Hi,
    According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
    IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
    first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
    add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
    add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
    You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Smash Bros Preorder Bundle Not Available In Spite of Email Saying it Was Ready for Pick Up

    I had preordered ({removed per Forum Guidelines}) the Wii U Smash Bros Bundle (SKU: 7493005) on 8/4/14 at bestbuy.com utilized the pick up in store option (may be the last time I do that).  When I went to the Middletown (461), NY store to pick it up yesterday before 3pm. I did not anticipate any issues since I received an email saying that my order was ready for pick up and have never had a problem when I have gotten such an email.
    When I arrived at the store, I had to wait for someone to finish with another customer. The associate attempted to find my game, but it was not at the customer service desk. She had another employee look elsewhere, but I had to leave. The and the game was not found. I had to leave to pick up my daughter from school, so she took my name and number down. About 10 minutes later I got a call telling me that the store oversold its preorders and there was a system error. I was told that it would be in sometime in the next week.
    After getting my daughter, I went back to the store because I could not understand how this happened. This time, I was helped by Brittany. The game was still not there and I was given the same explanation. I asked how preorders were filled because I had preordered in August and it just seems strange that I would get an email telling me that the product was there when it was not.  Based upon what others have written that they were told, it seems that online preorders should have been satisified first since they are paid in full.
    Brittany was quite helpful and called the Monroe, NY (1394) store to see if they had a physical copy since the computer system said they did. Whoever she spoke with in Monroe confirmed that they had a physical copy and Brittany asked that it be held at the in store pick up desk. She then transferred the store pick up over and I drove to Monroe with my family in tow.
    When I got to Monroe, I had not gotten an email confirming that the pick up was ready, but I went to the desk anyway to explain the situation. Victor looked around and did not see it. A shift leader/manager came over to assist, but there was no physical copy. I was understandably upset. The shift leader/manager called around to other stores to locate a physical, but to no avail.
    After waiting nearly 30 minutes, I came up with another "solution" because my family was on the brink of a meltdown give that it was after 5:00 pm.  So, I got a copy of the game and the gamecube controller, which are 2 of the 3 parts of the bundle that I ordered. The only missing component was the controller adapter ($19.99), but since that was available in stock online at Best Buy.com I figured that I would get that in a couple of days.
    So, being that I am in the Gamers Club Unlocked, I get 20% off new games. The Bundle is $99.99, so I got it for $79.99 before tax. But if I buy the components parts, I would only get a discount on the game and not the controller and adapter because the discount does not apply to hardware. The shift leader/manager agreed to give me the appropriate discounts so that my total cost when I purchase the $19.99 adapter would not exceed $79.99 pretax. So, while I was made "whole," I really wasn't because I did not have the entire bundle and I wasted at least two hours of my life.
    So, after leaving the store I promptly place on order ({removed per Forum Guidelines}) for the adapter on my smartphone. It says that it should ship so that I would get it by 11/26. No problem right? Wrong, because I get a subsequent email saying that it is backordered and that I can expect it sometime between 12/5 and 12/17.
    So, I would like some type of compensation for my trouble. I would be happy with a $25 gift card. I should not have to deal with this type of issue, especially when I place a preorder so far in advance and spend several thousand dollars a year in your store.
    1. How can you oversell a preorder? That is like overselling movie theater tickets. It is an unacceptable business practice.
    2. How can an employee identify an item in stock in another store, confirm its existence, and then it not be there? Thankfully, I only had to drive 20 minutes back and forth, but it was 40 minutes that I did not have to drive.
    The only positive in the whole thing was that the shift leader/manager in Monroe was so understanding. But even there, I had to come up with that idea.
    I would appreciate a response and at least the above compensation.
    Thank you.
    Sincerely,
    Darrell {removed per Forum Guidelines}

    Hello darrell521,
    I can’t thank you enough for the amount of detail you’ve provided in your post! Our in-store pickup process should be very streamlined for our customers who pre-order games at Best Buy and what you’ve described with your Super Smash Bros pre-order is quite the opposite. I sincerely apologize for the effort you had to put into redeeming the items needed to recreate the bundle, especially since you should have simply been provided your original copy upon your first arrival to our store!
    In reviewing your BestBuy.com order for the adapter, I see that it actually did ship and I believe you’ve already received it! I’m happy to know that it’s very possible you’ve been able to play Super Smash Bros the way you originally intended. With that, I’m going to send you a private message with further information in regards to your purchases. Keep an eye on your inbox, which is located to the top right of your screen when logged into the forums.
    Thanks for sharing your feedback with us on the forums and you’ll be hearing from me soon.
    Brian|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Advertised lens not available for delivery or store pick up, Why?

    Nikon - AF-S DX Nikkor 35mm f/1.8 Lens for Nikon F-Mount Digital SLR Cameras $199
    This lens is NOT AVAILABLE for home delivery at $199. Why is BB offering it for store pick-up? I spent hours trying to find a store to ship it to and I couldnt find a single location, why?
    Solved!
    Go to Solution.

    Unfortunately its not available at pretty much every online/brick and mortar store now. The few that have it jacked the prices up big time (seen one selling it for over $400).
    Nikon (and most other camera companies) was affected big time by the past disaster in Japan. Sendai (where the tsunami hit hardest) is where Nikon makes pro bodies and pro lenses (possibly the glass elements for all their lenses even ones assembled in Taiwan and china) last I heard still is having issues with rolling blackouts. Nikon also makes lenses in batches. They dont have a line for each lens. They'll make so many of this model, then so many of the next and so on.
    You think getting the 35 1.8 is hard, try waiting for a 600mm F4. I waited 7 months for mine to come in.  
    King of the World...

  • PI is not able to pick the file from the FTP folder

    This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
    PI Adapter Log:
    An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
    Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
    FTP Log:
    (207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MDTM
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  REST STREAM
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  SIZE
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MLST type*;size*;modify*;
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MLSD
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  AUTH SSL
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  AUTH TLS
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  PROT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  PBSZ
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  UTF8
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  CLNT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MFMT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
    It should list  *TLOG.txt*  but instead it is trying to get into a directory named  *TLOG.txt*.  same for other interface.
    So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

    Hi Sisir
    The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
    Sisir Das wrote:
    "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
    Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
    By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

  • Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

    Dear Friends,
    In Se38  abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
    Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
    In  the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error  'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
    Please suggest how to resolve the errors.
    Regards
    Sridhar

    Hello,
    Why are you directly executing these programs?
    You will not expect these program to execute directly by going to SE38.
    I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
    For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
    Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
    The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
    Hope this is informative and solves your issue.
    Regards,
    Ravi

Maybe you are looking for