Not showing ALL of the network files in the folder.

I have a new mac at work, and we have it connected to the network. The folders show some of the files, but not all of them. They're not hidden, I already tried that. I need these files to show up. Any ideas?

Mac OS X 10.8.4, the network is just a network drive. I'm comparing it to the same network drive on my other computer which is running Windows XP.
The missing files have nothing in common. They're named similarly (but not exactly the same) to files that are showing up, same types of files. It seems it just is randomly not showing some files.
I'm wondering if it's just not connecting properly, since the files I add from the mac don't show up on the network drive.

Similar Messages

I tunes does not show all of the songs that are on my i pod

When I go to i tunes it does not show all the music that is on my ipod, since I got a new computer. I didn't change usernames or accounts or anything, how do I fix theis?

Where are you looking at in iTunes? Did you click the small black triangle next to your iPod under Devices in the left hand pane of iTunes to bring up a submenu of content. Click the on Music one. Is all of your content listed there?
B-rock

Viewer does not show all of the clip

Import routine:
MTS format from Canon > Converting to Quicktime with Voltiac software. Resolution 1920x1080.
Impossible to set correct In and Out points in the Viewer as the whole clip is not shown. Can change the duration of the clip in the Timeline as the whole clip is shown there. After rendering there are no problems in the Canvas.
Anybody got a solution? Would be much appreciated!
Regards,
Tryg

I'd be converting to 1440x1080 because FCE does not support 1920 without rendering.
At any rate, why the whole clip does not show up in the Viewer and does in the Canvas eludes me.
Al

My Apple TV does not show all of the movies in my library.

All are in the movies category, no home videos here. It almost seems to be movies that I have removed from a device. At least some of the ones not showing up were recently removed from my iPad. Came back from a trip and removed some of the movies that I had watched, but then my wife wanted to see them so we tried to pull them up on the Apple TV, but no luck. I am not 100% sure that they were showing up on the Apple TV before, but I know they have been watched on my iMac. I know all about the miscategorization of others but that is not an issue here. Any thoughts? Does the Apple TV have a limit??? Is it better to put them into a playlist when I want to see them? I have about 15 more to add and if still no luck I may reload iTunes and let it refind the library and see what happens. Thanks in advance for any help!
BTW my OS is iOS version 7.0.5, but that was not in the list.
Andy

I have the entire original Star Trek series on the computer, all tested, watched and working fine. They are all MPEG-4 video files, and I can watch them on multiple computers and TVs when pulling directly from my network. They are labeled "Star Trek Episode 15 Shore Leave" and so on. Before I went out of town I loaded episodes 1-12 onto my iPad to watch while traveling. Again, they played fine. When I returned I had only watched the first three, so when I resynced my iPad I removed those three (episodes 1-3) and put on some other movies. Tonight when I went to watch them on the Apple TV I find that those three specific episodes are missing from the Apple TV list, so the ST episodes start with #4. Just kind of weird. These episodes are all the same version, done at the same time, the same way, no differences between them, even in size. Must can't figure out what is keeping them off of the list but it seems to be more than just coincidence that the three I notice missing are ones that I just removed from my iPad.
Also as to the iOS version you are correct, my typo, should be 10.7.5.
Thanks for the help and just to clarify I checked with one of my purchased movies as well as the manual ones and two do not show up, both again removed with the last sync. But they are still in the library! Can't figure it.
Andy

The File Explorer does not show links in the folder structure on a computer

Dear all,
My general issue is that, when I connect my Z10 (SW release 10.2.1.2102) via USB, the File Explorer shows some folders from the connected PC. It does not list folders that are links on the computer.
A lot of those links are duplicates in a different language (because of the multilingual version of Windows 7). My particular issue is that I had to move my Documents folder to another disc and created a hardlink to that folder on the primary SSD disc. Now, this link does not show up at all in the File Explorer on my Z10 device.
Anybody knows a workaround, please? Maybe it exists another file manager similar to that one by BB, which could do that...
Thanks for reading!
Cheers,

If you look at the browser use stats you'll see that its kind of useless to preview your site in Safari...
Chrome is poised to overtake IE so its worth setting up your own local server. Its quick and easy.
From Mac Help..
Sharing a website on your computer
You can use the Apache web server software included with Mac OS X to host a website on your computer. Before doing so, you should already know how to create HTML pages and build websites.
To host a website on your computer:
Use the HTML editor of your choice to create your website. For your site’s homepage, use the filename “index.html” so that web browsers can locate and open it automatically.
Put all of your website’s pages, graphics, and any media files in your home directory’s Sites folder.The existing index.html page will be replaced with your new index.html page.
Choose Apple menu > System Preferences and click Sharing.
Select the Web Sharing checkbox.
To view webpages you put in your Sites folder:
Open a web browser and go to http://your.computer.address/~yourusername/.
To find your computer’s address, choose Apple menu > System Preferences, and then select Web Sharing. The address is displayed in the window.
For “yourusername,” use your account name, and make sure you include the ending slash (/). To find your account name, choose Apple menu > System Preferences, click Accounts, and then select your account in the list.
You can also share a website on your computer by placing files in /Library/WebServer/Documents on your hard disk. To place files there, you must be logged in as an administrator. To view these pages, open a web browser and go to http://your.computer.address.

Why is the Spry image slideshow not showing all of the thumbnails?

Hi, I have a problem with the Spry image slideshow with filmstrip. I downloaded it and inserted all of my pictures and thumbnails. When I load it up in Firefox and IE seems to work perfectly.
However when one scrolls through the images, some of the thumbnails are not displaying. Also, sometimes some of the images won´t display at all. I have double checked the files and they are
all the correct size (100x100 for the thumbnails) and they are all available in the proper slideshow folder on my webpage. I am at a loss as to what the problem is, since it works fine for the other
images. Here is a link to the site:
http://priental-solar.de/referenzen.htm
Any help would be greatly appreciated. Thanks

All working OK here. All thumbnails and fullsize images appear OK.

Keynote not showing all slides on .ppt file

Hey there,
I've downloaded a powerpoint for class and when I open keynote there are only 42 slides available. I know there are more slides as everyone around me has them and some people are on macs as well. I looked for a solution but I haven't found one that answered this question. Is anyone else having this problem and does anyone know how to fix it?
Thanks!
P.S. when I do a preview of the file by pressing space bar all the slides are there.

Check your copy of the presentation for "skipped" slides. Look in the navigation panel view and if there are skipped slides, the remaining slides get renumbered resulting in a lower total count. A skipped slide can be unskipped by right (command) clicking on the skipped slide and selecting "Don't Skip Slide"

When I upload audio from itunes into my imovie project, it does not show all of the track?

Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
I have spent 10 hours trying to rectify this problem.......
can anyone help me with this problem
Peace, Love & Happiness
Jayondrums

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Filter Panel in Bridge not showing all the categories

I am using Bridge CS5 and I download my photos to my laptop using Canon's EOS Utility program. In the Filter Panel on the left I get only a few catogories for some folders where for other folders I get the total of the categories. When I do click on a folder, then while it is collecting all the photos you can see all the categories for a few seconds but then it ends with sometimes just 3 categories. I am using Windows 7 on a 64bit laptop. All the categories in the dropdown box are also marked but still they do not show all in the panel.
What I now saw was if I go to the thumbnails in the Content Panel and I just click on a thumbnail and move it around and back again then a small 600byte ".bridgesort" icon appears and then all the categories show in the Filter Panel for that folder. Anybody knows what is going on? Thanx

In the Filter Panel on the left I get only a few catogories for some folders where for other folders I get the total of the categories.
The filter panel reflects the data of the content panel and while it seems this panel has a mind of its own it only shows categories if there is a choice in a category to filter. For instance having landscape and portrait files in the folder orientation shows landscape and portrait, if you want only landscape this is an option to use this filter for showing only landscape in the content panel. When you have only landscape in the folder there is nothing you can filter because everything is the same and therefor it shows no option for it.
What I now saw was if I go to the thumbnails in the Content Panel and I just click on a thumbnail and move it around and back again then a small 600byte ".bridgesort" icon appears and then all the categories show in the Filter Panel for that folder. Anybody knows what is going on?
You obviously have used the menu View / show hidden files activated. What you see is a small file that contains data for the sort order you have used. The moment you move one file to a new position the sort order changes to manual.
If you deselect the option to show hidden files you won't see this file also.

Freight Carrier Form not showing all records

The Freight Carrier form is not showing all of the data that shows in the table
(ORG_FREIGHT). For the Organization that I am in (#23) the table shows 108 records but the form only shows
35 records. Why? How can I make the form see all of the records in the tables? I am in the middle of converting 11.0.3 to
11i.
Thanks
Shelby

What version of Visual Studio and the Crystal for Visual Studio SDK are you using?
-Dell

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Finder does not show all the files in a folder.

I have created a folder in Photos in which I put all the photos I want to use for social media. If I access the folder through Facebook, all the photos are there, but if I go to the folder through Finder, none of the photos I have added in the last two to three weeks are to be found.
The only way I can find them in Finder is to go through All My Files/ images and then scroll through hundreds of images. This is time-consuming and very frustrating.
I have tried relaunching Finder several times but it has made no difference. Any photos from the past 2-3 weeks can not be seen in the folder, even though they are clearly there when I open the folder from Facebook.
Any ideas?
Thanks,

Thanks for your reply. I have only had my new Macbook for a few weeks and do not have DropBox or GoogleDrive (or anything else) on it. It is a very weird problem.

SMB share not showing all available files

Hi,
At work I have to connect to several SMB shares. Most are fine, however 1 of them does not show all the files that are on that share. I know I'm using the right domain, username and password. I've checked the console and can see this message repeated when I connect.
mbgetmem(449): incomplete copy
mbgetmem(449): incomplete copy
mbgetmem(449): incomplete copy
mbgetmem(449): incomplete copy
I'm using OS X 10.4.8 and have no idea of how to proceed. My IT department do not support our Mac's so any help would be greatly appreciated.
Many Thanks
Kieran

excellent reply. Thanks for the details.
Oh, one more thing-
this 30-item limit is just in this same troublesome share.
Before the day gets away from you, ask the network admin to check permissions on this share. Perhaps the 30 files you see are the only ones that you have explicit rights to view.
they may need to ease up on restrictive permissions on this folder/drive.
(Images over a network can be funky, since Mac wants to display a little thumbnail of all those picture files...if you're viewing 'as icons', what happens if you change to 'by list'?...thinking out loud there.)
(not sure if I posted this...lost an open window for a few minutes :o

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

Not showing ALL of the network files in the folder.

Similar Messages

Maybe you are looking for