NVidia PNY GeForce 6600 AGP Flashing Issue (ROM says too large for EEPROM)

Here's a puzzle for anyone willing to assist (I've heard japamac has a good history with this sort of thing so *fingers crossed*).
So, I got a Quicksilver Power Mac G4 recently for free (gotta love the university just throwing stuff away) and it was the 800Mhz Single Core model. I've recently acquired a Sonnet 1GHz upgrade cpu nib from a thrift shop for $7 and also got my hands on a free and working PNY 6600 AGP card (256mb). I had recalled the 6600 having the ability to flash a mac rom so I thought it would be a sure thing, especially after having done similar build-up for my old Dual 500 Gigabit Ethernet machine, instead opting for an ATI 9600 and a 1.8 sonnet proc which I then sold for $180 bundled with Leopard.
I followed this tutorial (https://discussions.apple.com/thread/2645959?start=0&tstart=0) and downloaded the latest nvflash and the rom image hosted on the site. According to windows the rom file is 32kb, and when I opened up nvflash it stated the rom already installed was around 64kb. I followed all instructions to a t and even opted to erase the eeprom as was suggested after backing up stock.rom.
So far so good...however when I try to flash the nvmac.rom file, I keep getting some error about a PCI board id not matching (having to override w/ yes) shortly before getting an error message that states that the .rom image is too large for the eeprom. How is this possible?
The card in question is a PNY GeForce 6600 256MB DDR DVI-VGA-TV AGP Video Card G606600ABD25T+BC4BCA
Am I just SOL because it actually is too large, or am I missing something here? I've re-flashed the stock.rom back onto the card and all works well on the windows front, but I was really hoping to have a mac 6600 on the cheap...any suggestions?
If you need any specific info, just ask. Will try to respond asap. Other than the rom size error message, every other step of that tutorial works just fine.

Unless I am missing something, the 6600 ROMs on the Mac Elite site all (3) show a 128 KB size. The 6600 PNY is listed as 128, and a download and check of the file confirms it.
If your cards ROM is 64 KB, you will need to solder a new, larger chip on the board.
Did you download a 6200 ROM?

Similar Messages

'flash:c2600-js-mz.122-34.bin' is too large for available memory??

guyz, i have upgrade my 2621 IOS,the IOS requirement is 16/48 and my router is have 16/48 as well. But everytime the router boot, ther is an error msg. What does it means?
"%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "c2600-js-mz.122-34.bin"
++++ BOOT MSG HERE ++++
program load complete, entry point: 0x80008000, size: 0xb8d40c
Self decompressing the image : ################################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0000A2 0X0010A400 C2600 Dual Fast Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0040EFB0
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 10 percent iomem. [5Mb/48Mb]
%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "c2600-js-mz.122-34.bin"
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 49152 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xb8d40c
Self decompressing the image : ################################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0000A2 0X0010A400 C2600 Dual Fast Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0040EFB0
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 10 percent iomem. [5Mb/48Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
+++++++++++++++++

++++ Show Version ++++
Router#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(34), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 01-Mar-06 20:31 by pwade
Image text-base: 0x8000808C, data-base: 0x814718E4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 7 minutes
System returned to ROM by reload
System image file is "flash:c2600-js-mz.122-34.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 44032K/5120K bytes of memory.
Processor board ID JAD04290DBX (302381003)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
+++++++++++++++++++++++++++++++++++++++++++

I am having trouble with a video. I have tried to copy it to a flash drive because it is too big to fit on a DVD, it says it is too large for the volumes format. Please advise.

I have done many DVD's for seniors for graduation so I am familier with Imovie. I have just finished a projec that is a combination of video, music and stills. I shared it through idvd. Now I can't burn it to a dvd because it is too large. It is too big even for a two sided disk. I have researched it and i find that blue ray would be big enough. Does apple offer blue ray burner? if so, what is the cost? I tried another route and took my external hard drive to copy it to a PC. there computer wouldn't recongize my drive. I am assuming it is because it is formated for apple. I tired copying it to a flash drive and and it says that it can't be copied because it is too large for the volume's format. Suggestions? PLEASE!!!!!

Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff.

Uploading flash, how much is too large?

Hi, I am trying to create a web site suing adobe Dreamweaver and flash, for the first time.
I am trying to upload a webpage that contains swf.
When I check mu site I could only see a blank page with the webpage title at the top of the page.
When I contacted the webhosting company they say they can see the message that a newer version of adobe flash player is required.
From my computer I cannot even see the message.
The helpdesk person said there are possibly two reasons for it. Either there is a problem with the code in flash or it is too large.
The size of files I uploaded as follows:
HTML: 4KB
Scripts: 37 KB
(The size of swf is 29KB which I did not upload)
Are they too large to upload? If so, what is the maximum size of file can I upload on a webpage?
I know they are basic questions but I am trying to create website on my own.
I would appreciate some friendly advice.

If the html page is supposed to contain the Flash file, then you need to uploadc the Flash file (swf). html pages are simply text files that define content. If any of that content happens to be another file, such as an image or sound or swf file, then you need to also upload those files.

With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error Console

I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

Flash site - swf file too large

Hello,
I have created a website using Flash CS5 using AS2. The site was completely custom designed using Photoshop and in then imported into Flash. The site has all of the pages in the main timeline on different keyframes, so say frame 2 is home, and frame 3 is services, etc. This is a site for my design portfolio so I have probably 5 galleries that I have made, but they are very simple, one frame will have the first picture, the next frame will have the second picture and so on. I have gotten my site exactly how I want it and works how I want it... but in the end the .swf file when published, is over 9MB which I know is wayyyyyy too large for a flash site that works fast for everyone.
So how can I make this file size smaller. I am fairly new to this, although I had no problem getting my buttons to navigate with actionscript no problem, but my actionscript knowledge is very limited beyond that. I'm not sure where to go with this site to make the size smaller, so any help would be greatly appreciated.
I can send someone the fla file to look at if needed.
Thanks

Thanks for the reply.
Maybe you can help me a little more.
I looked up some tutorials having to do with the AS2 xml galleries, and I found that almost all of them were for galleries with fancy scrolling options and slider bars, etc.
My galleries are very very basic, thumbs are layed out on the left, click one and the image appears on the right. I'm not the best at using the actionscript and knowing what to do with all of it. So some of the tutorials made sense about getting files to load dynamically, but I'm not sure what code to keep in for my gallery, and what code to take out that I dont need for all the fancy effects.
my site is http://www.mrolfedesigns.com
as you can see, the galleries are pretty simple, I would like to keep them that way, and not have any complex scrolling or slider bars. Ive searched a lot into looking for some more simple tutorials, but am not finding any great ones that I can use.

Sync error: Uploading records failed: "client issue: request body too large"

1328917629619 Sync.Engine.AdblockPlus DEBUG Uploading records failed: "client issue: request body too large"
This happens from 2 Win 7 computer and 1 Win XP computer sync'd. Without the Add Block Plus being sync'd everything works.

Hi!
That's a problem with the Add Block Plus sync engine. It seems that they have issues on their servers.
Try to ask the same question in their forum: https://adblockplus.org/forum/
Good luck!

Dual Monitor Issue: 2nd Display too large...can't adjust...web pages provide no scroll bars

I have two (2) HP S2031 LCD flat screen monitors. They functioned perfectly with my old 32-bit machine (now gone). I have just purchased a new 64-bit Windows 7 machine. There are no error messages, but if I open a web page on the right (2nd) monitor, it does not display correctly. It's as if it is a little too large. I've tried adjusting the image using the Nividia software and using the monitor adjustments without improvement. It is difficult getting out of that window because no scroll bars (vertical or horizontal) present themselves. I am connecting through an iogear MiniView KVM switch to DVi-D sockets (with the four pins).
Is it a 64-bit driver issue? I think not, because display #1 looks fine. Could it be an iogear KVM firmware issue?
I dug out the HP driver disks that came with my monitors and installed them. After I did that, I realized these were a 32-bit installation. Now the monitor resolution won't go back to the higher, recommended level. I don't see the software installation on the "add/remove programs" listing. I'd like to change that.
BUT THE REAL ISSUE is that I need BOTH monitors to be able to display proper aspect independently. Remember, I've been through both the Nividia adjustments menu and the built-in monitor adjustments menu and found nothing that worked so far.
Please help if you can. This is for my trading business and I need it desperately.

When requesting assistance, please provide the brand and model name and/or product number of the computer in question. Without this information, it may be difficult or impossible to resolve your issue.
Have you swapped the two monitors to see if the problem follows the monitor or remains at the same location??? Try that first... if the problem follows the monitor, perform a hard reset by unpluging the monitor from power then holding the power button for 30 seconds. If the problem stays in the same location, you know both monitors are good and I would suspect the KVM isn't passing the "EDID" data to the computer. Removing the KVM should will tell you if this is the case.
Please post back with your troubleshooting results.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

BW Web Report Issue - Result set too large

Hi,
When I execute a BEx Query on Web I am getting “Result set too large ; data retrieval restricted by configuration (maximum = 500000 cells)”.
Following to my search in SDN I understood we can remove this restriction either across the BW system globally or for a specific query at WAD template.
In my 7x Web template I am trying to increase default max no of rows parameters, As per the below inputs from SAP Note: 1127156.
But I can’t find parameter “Size Restriction for Result Sets” for any of the web items (Analysis/Web Template properties/Data Provider properties)….in the WAD Web template
Please advise where/how can I locate the properites
Instructions provided in SAP Note…
The following steps describe how to change the "safety belt" for Query Views:
1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
2. Choose the register "Size Restriction for Result Sets".
3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
The following values are available:
o Maximum Number
o Default Number
o Custom-Defined Number
Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
4. Save the Query View and use it in another Web Template.
Thanks in advance

Hi Yasemin,
Thanks for all help...i was off couple of days.
To activate it I can suggest to create a dummy template, add your query in it, add a menu bar component add an action to save the query view. Then you run the template and change the size restriction for result set then you can save it by the menu.
Can you please elaborate on the solution provided,I created dummy template with analysis and Menu bar item...i couldn't able to configure menu bar item...
Thanks in advance

IOS 4.2 issue, or App issue? Photos too large.

I spent two weeks in Japan, taking photos on my DSLR, and uploading them via SD card into the camera connector to the iPad. All worked fine.
I ran Photoshop Express and iOS3.2 (can't remember if it was 3.2.1 or 3.2.2), and was able to edit all the photos, and upload them to FaceBook, and all was well.
Since I've been back, I installed the iOS4.2 update, and an update to PS Express.
Now, all of the photos (including ones I had previously edited) cannot be edited in PS Express, it gives me a message "This photo is too large to be viewed".
Similarly, I've tried another program called Fluid FX, which either gives a similar message, or just crashes.
I've made sure there are no other apps running, have tried a hard reset, and nothing has helped.
I'm wondering if anyone might have any insights before I try downgrading back to iOS3 (and get back my orientation lock button, yay!).
(and yes, it seems another solution is just to take lower resolution images on my camera, but who wants to do that?)

I thought I had updated PS Express for iOS4, but checking the app in iTunes says:
# Updated: 29 September 2010
# Current Version: 1.3.2
# 1.3.2 (iOS 4.0 Tested)
which is before the iOS4.2 release.
Fluid FX has been updated for iOS4.2

Flash CS3: Help panel too large to resize

Hi!
I feel quite stupid but...
for some reason my Help panel is too large, making it
impossible to scroll down to all the items.
Here's a screenshot:
http://tinyurl.com/2aycu4
When I open the Help Panel, e.g. by pressing F1 the grey
header bar is flush with the top of the screen - no way to drag it
higher up. The problem now is that the bottom of the panel is
somewhere well below of the lower edge of the screen - so there
seems to be no way to drag the lower corners of the panel in order
to make the panel smaller, small enough to fit the window. As it
is, it is impossible to scroll down to the lower parts of the Help
panel.
Any help is very much appreciated!
Thanks!
Andreas Weber

Can't you resize from the top? In Windows you can usually
resize from any window edge. So, just move the window down then put
the mouse of the top edge until you get the resize arrows...
Or am I wrong I notice the help window is
non-standard.

Printing from Flash page is too large for paper size

Here's what happens: I go to a favorite Sudoku web page (http://games.latimes.com/indexsudoku.html?uc_featurecode=lasud) and hit the "print" button on the page to print the puzzle. When I look at it in Preview, the puzzle extends off the page on the right and bottom. The same happens when I print it directly to my printer. Also happens if I select "Save to PDF". It seems that somewhere between the web page and my Mac, something forgets or ignores that my default printer is letter size and insists that my paper is larger.
If I print the same puzzle in my Windows virtual machine to the PDF printer, the puzzle is normal. So, I figure something is amiss on the Mac side and I don't have a clue what it is. (I am new to Mac).

Thanks for the advice. I did all you suggested and then tried it. Looks like everything boils down to Page Setup. I have two printers here at work and everything works fine if I set the HP Color Laserjet as my default in Page Setup. However, if I use the Canon MP830, the page goes wacko like before. For the Canon, the Canon IJ Driver (ver 4.8.3) was automatically selected at installation.
Doesn't matter which printer I print to...it all seems to depend on which printer I select in Page Setup. Any ideas on what is going on?

MSi GE70 Apache Pro w/ nVidia GeForce GTX 860M Graphics Issues

Hi there,
I recently purchased an MSi gaming notebook with nVidia GTX 860M graphics. However, just recently I've been having game-breaking issues with textures rendering, artifacts and particles as well as the drivers crashing now and again(desktop flashing and flickering).
I've only had this laptop for just over two months and am quite disappointed with issues coming up already.
To get to the specifics; I have recently been playing through the Mass Effect trilogy and, just the other day, started up a file in Skyrim. The following screenshots show my biggest issues aside from the obviously serious driver crashing issues. I believe the issues started maybe a month into owning this laptop and since it has been getting progressively worse. I feel as though I have been all over the internet trying to find a fix to this, I've tried everything suggested, everything that I could think of, and I am just about ready to have it sent back. I was hoping someone may have some other options before I do send it in.
https://www.dropbox.com/s/d8koa8f8i1z9j3d/Photo%202014-09-30%2C%201%2040%2044%20AM.jpg?dl=0
On the title screen for Mass Effect 3 I get these consistent blue and red glowing orbs, they also occur on several other maps within gameplay.
https://www.dropbox.com/s/a9c47w320u5xylb/Photo%202014-09-30%2C%201%2043%2016%20AM.jpg?dl=0
Once I get in-game, this occurs everywhere. Textures "expanding" off of characters into random points.
https://www.dropbox.com/s/v37un4vespalosx/Photo%202014-09-30%2C%201%2045%2036%20AM.jpg?dl=0
This happens occassionally on characters; ridiculously shadowed faces to the point where they are barely recognisable.
https://www.dropbox.com/s/8cebgs4t10ghnh0/Photo%202014-09-30%2C%201%2046%2020%20AM.jpg?dl=0
On almost all wall textures there are white glowing particles like the ones behind the character here. In extreme cases, the wall becomes a texture of textures. All of the textures in the game are miniaturized into a wall of textures on certain objects.
I've also had signs and the game's menus and interface stretched and skewed all over the place. If I continue to play it with the above issues, the game eventually hangs and I have to alt+tab out and back in, or close it using the task manager. All of these issues also occur in Skyrim and any game using the same, or similar, engines. The only game I have been able to play almost seamlessly without any issues is Ragnarok Online 2, an online MMORPG.
I have tried the following:
nVidia's GeForce Control Panel: any and all combination of options.
Re-installing video drivers.
Re-installing DirectX and PhysX.
Formatting and a fresh install of Windows and all games and drivers.
Any other troubleshooting other forums have provided.
Removing the pagefile for virtual memory limits.
Using Intel HD graphics to test for other issues.
PC/nVidia power settings.
The one time I thought it may be fixed, all it took was me plugging in my laptop to cause the issues all over again. I've tried downloading MSi Afterburner to check GPU temperatures and I rarely even go over 65~70. I'm absolutely out of ideas. It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
I'm running Windows 7 64-bit
nVidia GeForce GTX 860M
Intel Core i7-4710HQ CPU @ 2.50GHz
12GB of RAM
Any ideas/help would be greatly appreciated. I would really rather not have to send it back. I've also posted this over at the nVidia forums because I'm -hoping- it's a software issue.
Thanks in advance!

Quote
It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
Quote
To me it sounds like a hardware issue (especially if you have rolled back to factory default and reinstalled from scratch)
It wouldn't be a hardware issue since you can play other games without problem.
Easiest way to tell if it's a hardware issue or not is to run the benchmark tool for example 3DMark 11 and see if the problem also happens during the benchmark.
For the rendering problem you were talking, please provide not only the problem picture but also the picture without problem to let us make the comparison.
I'm sorry to say, but some of the picture I'm not really getting what the problem you're talking about.
For the shadow face, here are few user provided fix which might be helpful.
http://forums.steampowered.com/forums/showthread.php?t=2282965
http://forum.bioware.com/topic/55984-shadows-way-too-darkblack-intendedscreenshot-solved/
Quote
Re-installing DirectX and PhysX.
NVIDIA moderator says some of the games is required to play some older Physx games, but not sure if it works.
If you would like to have a try.
https://forums.geforce.com/default/topic/524066/geforce-drivers/official-nvidia-r310-61-beta-display-driver-feedback-thread-released-11-20-12-/post/3714758/#3714758
I'd suggest to post the issue on EA, steam or obioware and see if there are people looking into it.

[GeForce 6] NVIDIA GeForce 6600 512

Doe's Nvidia support the "Diablotek NVIDIA GeForce 6600 512" model NE+66000+TD51-PM8543 ?
What new drivers support the 512 memory?
I had posted about this before but didn't any replies except my own that I had found the basic product info. I've seen these cards at different sellers locations but beyond sales there is no extra support. Specifically from NVIDIA.
All help would be good. Also the card with the original driver pack works GREAT.
Also WHY does the Package say "SLI supported" and yet there is NO SLI bridge connection? Did NVIDIA make a mistake and send out a bad card or just a bad package?

I guess the mistake is from Diablotek, about SLI issue, and personally I don't like Diablotek products. And I guess you should stick to the driver pack, if it works don't touch it.

Geforce 6600 on rs480m2: s3 issues?

I have the following question:
did anybody succeed to install a geforce 6600 on a rs480m2 without standby problems?
I have installed a xfx geforce 6600 (passive, low profile, 256 mb) on this motherboard. Without the card I have no problems with resume from s3 standby (ati catalyst 6.2, bios 3.9), with the card it resumes from standby but the screen stays black (forceware 81.98). I hope that anyone succeeded and give me some tips about best drivers.
I use the pc for mce2005 and I have installed all possible windows updates.

Update after question to msi technical support:
My question:
I own a rs480m2 mainboard with a venice 3000+ cpu. I use this setup for mce2005. Resume from s3 standby gives no problems when I use the onboard gpu (ati catalyst 6.2 and bios 3.9). When I add a xfx geforce 6600 gpu the system does resume from standby but the screen stays black (forceware 81.98). Is this a known issue with this board and can you recommend what I should do (drivers, bios,...)
The 6600 gpu gives also hangups when watching livetv, on the forum I saw that there are more members with compatibility issues between geforce 6600 and this mainboard. Can you help me?
Their answer:
Sorry we haven't receive the same issue yet. Would you please try to contact to your VGA card vendor for update the BIOS the install the latest driver. Also we would suggest you try to change another PSU with higher power.
Is this a problem of the VGA card, I cannot find a new bios for this card? I use a 400 W Elan Vital PSU, could that be the problem?
Am I really the only one having problems?

NVidia PNY GeForce 6600 AGP Flashing Issue (ROM says too large for EEPROM)

Similar Messages

Maybe you are looking for