NWDI and SLD

Hi,
Can we have a NWDI track created with systems and software components residing in another SLD.
(I mean NWDI server has its own SLD.But the track I would like to create on it and maintain has its systems and components on another sld.)
(so should the track creation require just a pointer(url) to the required sld each time or should it be its own sld allways)
Hope I am clear.
Any help is highly appreciated ,
Ashok

You can specify external SLD in NWDI. It is not necessary to link with local SLD.
Log in NWDI CMS, choose u201CLandscape Configuratoru201D, "External Servers". SLD URL.

Similar Messages

Dtr and sld login issue

i am connecting to the host network via the vpn.
post that when i access the dtr url via the internet explorer i am able to gain access to it.
also when i access the sld url viz the internet eplorer i am able to gain access to it.
but when NWDS tries to connect to the dtr and sld for track import. i get and error saying that 'some infrasturcture servers are not reachable'
when i ping to the URLs of the dtr and SLD in the command prompt, the request is timing out.
please assist me in this regard.
Edited by: ashwinmadival on Jan 26, 2011 7:59 AM

Hi ashwin,
Please check the below note: SAP Note No. 941150
If the issue persists, Set up loggin as per note: #751640 How To Configure Logging For NWDI Developer Studio
. Then reproduce the problem and check the logs along with the server defaultTrace..
Thanks and regards,
Hemanth Kumar
SAP AGS

NWDI and CE

Hi,
It might be a stupid question but what is the difference between SAP CE and NWDI?
I have CE 7.1 Ehp1 and NWDS, is this enought to create NWDI?
I was reading about both solutions and NWDI has DTR, CBS, CMS and SLD but CE also has sth. like Initial setup of functional unit DI (all-in-one).
I understand that if I have CE 7.1, I don't need nothing else. What is the role of CE in NWDI?
But if I don't have it, what do I need to install?
Best regards,
Pawel

Hi Pawel,
you are mixing up some words here. The answer is pretty simple if you know the SAP component model.
CE 7.1 is a SAP netweaver release (not a full one, but a partial relase) in the component model SAP CE 7.1x is a product.
A product can have one or several software units. In sapinst you will see them as usage typs. NWDI is such a usage type.
So you can decide to install NWDI as a useage typ on an Netweaver CE AS Java.
So if you want to install a NWDI on NW 7.11 CE. Check the AS Java and NWDI checkbox in the initial installation or you can add another usage typ on an existing as java with sapinst.
I would not reccomend to jsut install the 3 NWDI SCS on an existing AS Java via SDM (NW7.0) or deplyo controler on 7.11. You will get a lot of trouble with missing CTC Templates like setup sld and nwdi full.
Hope this helps
Jan

Are roles in SXMS_CONF_ITEMS and SLD consistent?

hello!
i installed and configured my new XI system.
when i go in Runtime Workbench (via browser) i see an error in result of Integration Engine monitor .
"Are roles in SXMS_CONF_ITEMS and SLD consistent?"
i check all in SLD and i think is ok.
have you any suggestion?
thanks
Alex

The role of a business system is defined centrally in the SLD.
However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
if helpful reward points are appreciated

Quicksizer for ADS 7.02 and SLD 7.02

Dear all,
We have installed a 2 systems, an ADS and SLD, both on a SAP NetWeaver 7.02 platform.
Now, we have to install both of them on QAS and PRD environement.
Question :
Using QuickSizer tools on http://service.sap.com/quicksizer, I can see that there is no specific option to analyze
ADS and SLD hardware requirement.
Any suggestion is welcome
Best regards
SAP NetWeaver Admin

Pascal Cuennet wrote:
Dear Sunny,
> Dear Siva,
>
> Portal is made of an AS-JAVA + EP + EP Core
> ADS and SLD are only composed of an AS-JAVA.
>
> I cannot size ADS or SLD as an EP.
>
> Best regards
> SAP NetWeaverBC
You are right. Then why you want to do sizing for ADS and SLD. Could you please explain the reason for doing sizing of ADS and SLD ? I would do sizing of portal system based on usage scenario like BI, ESS/MSS etc. not for ADS and SLD.
Thanks
Sunny

XI and SLD Admin Roles

Hi,
Can you help me with identifying the Admin Roles for XI and SLD.
Thank you.
Joe Vellaiparambil
[email protected]

Hi,
This url will help u-
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
Also refer Installation Guide-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
Regards,
Moorthy

Question on NWDI and DC for web dynpro for ESS components

Hi
I am working on installing NWDI and mostly we will be working with ESS & MSS webdynpro customization for NW2004s.
I have a doubt, now for customizing the web dynpro components of ESS is it just enough to create the SC and track and once doing this will the developers get to the DC's of ESS?
Or initially do I have to download the editable part of the web dynpro components and deploy it in the server?
I am not sure how the web dynpro components are made available for the developers. Please help me understand.
Thanks in advance
regards
-sm

Hi
Hope this link might help:
https://websmp206.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=872892
But please specify the EP version .
Thanks & regards
Arun Singh

Component dependency and sld dependency

hi all,
i need to create,component dependency and sld dependency.how to create and wht is the use of these dependencies.
regards,
AVR

Hi,
it's explained here:
http://help.sap.com/saphelp_nw04/helpdata/en/44/63977c40b54ddfe10000000a1553f7/frameset.htm
Regards
Patrick

Roles setup for NWDI(CMS, SLD, DTR)

Hello All,
I have a req to to setup users & roles for NWDI (CMS, SLD & DTR). please let me know about your strategy while implementing this. If you have any document other than help.sap.com, that would help.
Currently we're thinking of the following users to be setup on CMS, SLD. Pls suggest as to what privileges each group of users get.
Portal
Basis
Developers
Security
Prd Control
Operators
Thanks.

Check this link
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f341af-e86e-2910-3e8a-d9e3c227d938">Link</a>

SolMan and SLD

Hi All
I have installed Solman 4.0 and SLD.
Is possible to configure SMSY without to configure SLD previously?
Thanks

Dear Fabian,
Yes technically it is possible to configure Solman without an SLD.
It is entirely up to you - you can have separate SLD
islands used for different products - you can
even have 2 central SLDs using the same SLD bridge
You can also have as many SLD as you wish - bearing in
mind this will increase administration.
SLD usage for Solution Manager is not as critical as
useage for XI because SMSY in solution manager can
obtain system data via STMS and you can also add
data manually, it normally only benefits Solution Manager
to connect to an existing SLD which already has been
populated otherwise you would have to setup SLD only
to populate SMSY which can be populated directly without SLD.
If SLD does not already exist with systems for other clients
the time advantage of using it with Solution Manager is
removed.
You can connect Solution Manager as a client or data
supplier to any SLD at any time after installation - not a problem
just change SLDAPICUST destinations and RZ70 settings. Also please check once the settings in SMSY_Setup and remove the write back option in the Expert Configuration for SLD.
Hope that this reply answers your query.
Regards
Amit

Difference between NWDI and JDI

Hi to all,
Is there any one who can give me answer on next question.
1. What is difference between NWDI and JDI? I have got confused because I red tutorials how to configure NWDI and there are two roles that use the same UME Actions. JDI.Administrator and NWDI.Administrator that uses CBS.Administrator and CMS.Administrate actions. Is it the same? Is NWDI is the same as JDI but for NW2004s (NW7.00)?
Best Regards,
Aleksandar

Hi Aleksandar
NWDI is same as JDI but the version difference. If you just use NWDI.Administrator it should work fine.
Regards
Praveen

NWDI , CMS and XI tracks and SLDs..oh my...

I have an issue that is affect me from moving forward for our overall development effort.
I have PI/XI on one server that is server also used as a central SLD (psuedo central). I have installed JDI (NWDI) on another server also running an SLD and used as a central dev SLD (webdynpros etc...)
I am now building or rather starting to build my XI tracks however I am not sure if I am moving down the right path.
If I have an SLD on XI with other system pointing to it (i.e. Portal SRM CRM etc) and I have my JDI server running DTR and CMS how do I go about building my XI tracks.
Do I point back to the XI SLD or do I use my local SLD on the JDI for building the track on the NWDI server?
What would be the "SAP" way and what are any customer experiences/architecture.
I would like to ensure the least method to upset the apple cart and redo the JDI piece as other systems are using it now.
When I build my track do I use SLD on XI or the local JDi SLD and what are the ramifications if any.
Thank you,
Mikie Brogan

Hello Mikie,
We have the same architecture and have a look at my blog
<a href="/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects">Configuration of CMS in Central NWDI & SLD to transport XI objects</a>
Hope this will resolve your concern.
Thanks,
Praveen
PS. Dont forget to reward the points.

CM Services stand alone (Unknown session NWDI and grey components in NWDS)

Hello.
We are trying to configure NWDI in portal 7.3 using the following document http://scn.sap.com/docs/DOC-14706 however when Im trying the syncrhonize step (page 22) it shows me an error HTTP 400 Unknown session wherever I click in the sync page.
I dont know if it's because of this missing step but when I import this in NWDS the dependencies are empty and when I try to create a develpment it shows me greyed components with the mistake ( Software component does not support this development component type. Required DCs are located in an SC that is not visible from the selected one.). If any more information needed please ask me.
Thanks in advance.
Alex.

Thank you !!! it seems that is solved now, it shows me some components good to go, eventhe less When I try to create a Wevdynpro it says "Support component (ACH) for vendor ''sap_com'' is required" Could it be because of some missing DC ?
Great answer thank you !!https://service.sap.com/sap/support/notes/1536755
BTW that note lead me to this other one where I found this part that made the trick
Note 1536755 - DC type is grayed out.
What can be done?
Check in SLD if references from the developed SC to the found required SCs
exist. Create them if they are missing. . Update the corresponding track in CMS
by first syncing current dependencies from SLD to CMS ("Update CMS" in CMS UI
Landscape Configurator - Domain Data) and then adapting the track in "Track
Data" by using "Synchronize SC Dependencies" - "Show Software Components out of
sync with SLD", select all SCs shown as out of sync and press "Accept SLD
Definition" and then save the track. Switch to Transport Studio in CMS WebUI
and check in and import the corresponding SCA files. After that update the
development configuration in NWDS.

Change Object Server in SLD after system copy and SLD move?

Hello,
we did the following:
- we migrated the SLD to the production system in our landscape
- we copied the NWDI to a new system
- the old object server was named sapsrv88 (object server attribute in the SLD) which was the hostname of the old SLD server
Do I have to change the object server attribute to the new hostname of the SLD? Does this have any influence on the software components that we allready developed?
Thanks and best regards
Jens

Hello Jens,
you can rename the object server - details you'll find in SAP note 935245
When you rename it, the ID of the objects in the SLD is changed to the new ID, so normally you shouldn't have any problems with that.
If you're unsure about it, you can backup your SLD content using "Administration => Content => Backup => All Instances" - that backs up everything under /sld/active
or backup the software components you devoped using http://<hostname>:5<instance-no.>00/SCD/SCDownload
Best regards
Cornelia

Configuring NWDI and CMS

Hi,
We did a Development portal installation (DEV) with NMDI and finished the DI post installation in the DEV system and configured my SLD in solution manager. Now we are going to install Portal Quality system (QAD) with NWDI. I need some documents after installing QAD system, like DI post installation and CMS configuration from quality to development system. I mean to say that, DEV as a Domain controller and QAD to include in that CMS. Before doing the DI post installation in QAD, do I need to change the Domain data of change management in Quality like CMS name, CMS url, CMS user, password, trans dir, Domain ID(if so,Can we change this ID to DEV), DTR url, CBS url. If so, do I need to give the datau2019s of Development system? or how to configure my quality system CMS to development system CMS. I found some links but there is no link that says about the configuration in development.
Thanks
Regards,
Ral

Hi Narendra.
Thanks for reply.
While defining Software Component, I created a Build Time Dependency on these components and chosen SAP-JEE, SAP_BUILDT and SAP_JTECHS components.
While defining a Track under Domain in CMS (Landscape Configuration) i am not getting these dependent components under my SC.
So after adding SC to my track, i again Defined Dependencies on my SC. Now i can see these components under my SC but gives warning that "SC Dependencies are different but accepted by synchronization" and status of SC is yellow.
Please suggest.
Mandeep Virk

NWDI and SLD

Similar Messages

Maybe you are looking for