Obiee and informatica in one system

Hi gurus a simple doubt can we install obiee 11g and informatica 9.0.1 in one system for learning since am confused by various posts if it is possible then wch os I have to use since my pc is 64bit os win 7 I heard informatica cannot be installed on win7 just give a gud solution so that I can practice both in one system my pc cOnfig os win 7 64 bit processor i5 2.4 ghz ram 8gb hdsk 640gb

Hi,
You can install 11g and Informatica on same machine, just check the system configuration required.
Go through Certification matrix of 11g and BI Apps
OBIEE 11g - http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
BI Apps 7.9.6.3 - http://www.oracle.com/technetwork/middleware/bi/obia7973cert-matrix-395521.xls
Regards,
Srikanth

Similar Messages

  • EP 6.0 and BW in one system

    Hello everyone,
    We currently run EP 6.0 SP2 and BW 3.1 on separate systems and are looking at upgrading to EP 6.0 SP11 and BW 3.5.  We have a Netweaver sandbox system setup with both running in one system and I was thinking we could consolidate these into one productive system and possibly save some hardware along the way.  It seems with proper sizing it would be possible to do this.  Does anyone have any experience with running these together productively or is anyoneelse thinking of going that route?
    Regards,
    Stephen

    Your biggest consideration is regarding the UME. When you run combined ABAP/JAVA stacks then the UME for Java must be in the ABAP stack - so all your EP users will be managed with SU01. Certain user management functions are not fully available in the EP user mgmnt iViews (meaning you will need to use ABAP transactions for some UM activities), this is discussed in both Web AS and EP release restrictions note.
    From a performance perspective you won't find much difference between running them seperately (i.e. not in a combined stack) but on the same host vs. running them together in the same instance.
    Nick

  • Install OBIEE and Informatica

    Hi,
    My company is asking me to Install client version of OBIEE Administrator and Informatica. I have never installed this application before. Is there any document which will guide me to Install this application.
    Informatica version - 8.6.0.06
    BI Administrator - 10.1.3.4.1
    Any help in this is greatly appreciated.
    Thanks,
    Poojak

    Thanks chinna for replying to my question.
    OBIEE link - http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/install/installoraclebee.
    I am unable to open above link - getting an error "Page not found".
    Please send me some document for Installing OBIEE.
    Thanks,
    Poojak

  • CRM and ERP in one System

    Hi everybody,
    SAP plans to deliver CRM and ERP as  an Co Implementation; that means CRM and ERP will be available in one system with one SID.
    Does anybody know more, especially when will this be available?
    Thanks and regards.
    Andreas

    Hej.
    The link information between sap item and archived document is stored in tables toa01, toa02, toa03 or toahr. Maybe you can do a mapping/export/import from the entries between erp and crm....
    additionally you need to customize connection to the same archives.
    Did not try that, but i think it's worth testing :o)
    regards, Martin

  • PS and FICO in one system, payroll in other - payroll posting run fails

    Hi,
    We are a system solution is which one server contains FICO, PS, MM, SD Travel, CATS and mini-HR.
    The other has mini-FICO, HR and payroll. System is 604 SP36.
    We don't want to have the PS conifguration in HR server but we need to have travel costs via one ALE to HR server and then process them and return travel accounting information back to FI.
    Finally payroll run to send results back to FI. This is when we have problems to have G/L account assignments.
    Question is what is the minimunm way to have WBS element information for payroll to run. Enhance BaPI to transfer travel expense data (tables PTRV_HEAD and PTRV_PERIO or PTRV_SCOS)? Any suggestions?
    Prompt answer is highly appreciated.
    Thanks in advance,
    Pia

    For that, you need to synchronize the FI system with HR system with IDOC and then assign the new GL in HR system.
    This process should be reverse from FI to HR. The same IDOC will run however you need take the help of ABAP person to make it reverse from FI to HR.
    - Aby

  • OBIEE 11g, Informatica and DAC: Migrating from Oracle DB to SQL Server?

    Hi Gurus,
    Currently we are implementing OBIEE 11g with Oracle BI Application for EBS (Supply Chain, Procurement & Finance modules). We have incorporated all OUT-OF-THE-BOX mappings and configurations in DAC, Informatica and RPD (no change, only OOTB). We were using Oracle DB and Linux servers.
    Now the client wants to migrate this to one Windows box.
    Can anyone point out, what are the changes need to done to migrate to SQL Server database. Any existing documentation or link will be helpful.
    Edited by: Sudipta Gupta on Aug 2, 2012 1:59 PM

    If you are using SQL Server 2008 then you need to edit the DAC config.bat file replace sqljdbc.jar with sqljdbc4.jar.
    Rest of DAC and Informatica configuration is almost similar.
    Let us if you come across any issues.
    Hope this helps

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • Can I use my creative cloud products on more them one system at a time (Mac and PC)

    Can I use my creative cloud products on more them one system at a time (Mac and PC)
    I want to use the premiere on my Mac and some times on my PC.
    Can  I use it on other operating systems with one membership or do I have to purchase an other membership for my other system.   I am only working on one system or the other at one time.
    Thx

    http://www.adobe.com/au/products/creativecloud/faq.html
    Are there any unique benefits that come with my paid membership?
    Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
    Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information.

  • How to get system and boot on one volume - currently on 2 volumes

    I have ended up with 2 hard drives one of which has Windows 7 on one partition and the other one has 2 volumes each with Windows 8.1 installed.  This 8.1 drive has one volume (D) marked as Active, Boot and the other volume (C) marked as System.  
    I want to make the C volume Active System and Boot and have the D volume for storage only.    I need to make this change without losing data on either volume.   Can this be done, if so which of the many partition operations is the appropriate
    one.  Would a free download such as EasUS be able to do it?

    I have ended up with 2 hard drives one of which has Windows 7 on one partition and the other one has 2 volumes each with Windows 8.1 installed.  This 8.1 drive has one volume (D) marked as Active, Boot and the other volume (C) marked as System.
      I want to make the C volume Active System and Boot and have the D volume for storage only.    I need to make this change without losing data on either volume.   Can this be done, if so which of the many partition operations is the appropriate
    one.  Would a free download such as EasUS be able to do it?
    Sorry error in original description - Volume C is Boot and volume D is Active System.

  • Hi. My iMac hard drive is running Mavericks.  I have an old version of Quark Xpress (3.32) which won't run in Mavericks.  Can I partition my hard drive and run an older system on one partition, so I can access my Quark?  Is that possible?

    Hi. My iMac hard drive is running Mavericks.  I have an old version of Quark Xpress (3.32) which won't run in Mavericks.  Can I partition my hard drive and run an older system on one partition, so I can access my Quark?  Is that possible?

    Hi ancelau,
    QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
    So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
    So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
    Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
    So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
    How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
    Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
    Thanks
    Matthias

  • Send PO from one system and create a SO in another system

    Hello Gurus
    ii am learning ALE IDOC and would like to do a complete hands on practice. I have been doing some basic scenarios and so far i am progressing well.
    What i am planning to do:
    Now i would like to do an end to end scenairo of sending a PO idoc from one system and this should create a SO in the other system.
    Steps i am planning to do:
    1). Configure the sending system for a outbound PO idoc
    2). Configure the receiving system for a Inbound SO idoc
    3). Maintain VOE2(EDPAR) and VOE4(EDSDC) tables for partner information and organization information respectively.
    Questions:
    1). Am i missing any steps?
    2). I am confused on what to maintain in VOE2 and VOE4. Which information of PO should i maintin in VOE2 and VOE4 in the receiving system?
    ~Suresh

    Hi Suresh,
    this might be of some help.
    ALE IDOC
    Sending System(Outbound ALE Process)
    Tcode SALE - for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Create Model View
    Tcode BD82 - Generate partner Profiles & Create Ports
    Tcode BD64 - Distribute the Model view
    Message Type MATMAS
    Tcode BD10 - Send Material Data
    Tcode WE05 - Idoc List for watching any Errors
    Receiving System(Inbound ALE )
    Tcode SALE - for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 - Idoc List for inbound status codes
    ALE IDOC Steps
    Sending System(Outbound ALE Process)
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Create Model View
    Tcode BD82 - Generate partner Profiles & Create Ports
    Tcode BD64 - Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE - for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 - Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 - Send Material Data
    Tcode WE05 - Idoc List for watching any Errors
    1)a Goto Tcode SALE
    Click on Sending & Receiving Systems-->Select Logical Systems
    Here Define Logical Systems---> Click on Execute Button
    go for new entries
    1) System Name : ERP000
    Description : Sending System
    2) System Name : ERP800
    Description : Receiving System
    press Enter & Save
    it will ask Request
    if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
    Select Assign Client to Logical Systems-->Execute
    000--> Double click on this
    Give the following Information
    Client : ERP 000
    City :
    Logical System
    Currency
    Client role
    Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
    Click on Create Button
    RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
    give the information for required fields
    RFC Destination : ERP800
    Connection type: 3
    Description
    Target Host : ERP000
    System No:000
    lan : EN
    Client : 800
    User : Login User Name
    Password:
    save this & Test it & RemortLogin
    3)
    Goto Tcode BD64 -- click on Change mode button
    click on create moduleview
    short text : xxxxxxxxxxxxxx
    Technical Neme : MODEL_ALV
    save this & Press ok
    select your just created modelview Name :'MODEL_ALV'.
    goto add message type
    Model Name : MODEL_ALV
    sender : ERP000
    Receiver : ERP800
    Message type :MATMAS
    save & Press Enter
    4) Goto Tcode BD82
    Give Model View : MODEL_ALV
    Partner system : ERP800
    execute this by press F8 Button
    it will gives you sending system port No :A000000015(Like)
    5) Goto Tcode BD64
    seelct the modelview
    goto >edit>modelview-->distribute
    press ok & Press enter
    6)goto Tcode : BD10 for Material sending
    Material : mat_001
    Message Type : MATMAS
    Logical System : ERP800
    and Execute
    7)goto Tcode : BD11 for Material Receiving
    Material : mat_001
    Message Type : MATMAS
    and Execute --> 1 request idoc created for message type Matmas
    press enter
    Here Master Idoc set for Messge type MATMAS-->press Enter
    1 Communication Idoc generated for Message Type
    this is your IDOC
    Change Pointers
    I know how to change the description of a material using ALE Change Pointers.
    I will give the following few steps
    1) Tcode BD61---> check the change pointers activated check box
    save and goback.
    2) Tcode BD50---> check the MATMAS check box save and comeback.
    3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
    4) Tcode BD52---> give message type : matmas press ok button.
    select all what ever you want and delete remaining fields.
    save & come back.
    5) 5) go to Tcode MM02 select one material and try to change the description and save it
    it will effects the target systems material desciption will also changes
    6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
    give Message type : MATMAS and Executte
    ALE/IDOC Status Codes/Messages
    01 Error --> Idoc Added
    30 Error --> Idoc ready for dispatch(ALE Service)
    then goto SE38 --> Execute the Program RBDMIDOC
    29 Error --> ALE Service Layer
    then goto SE38 --> Execute the Program RSEOUT00
    03 Error --> Data Passed to Port ok
    then goto SE38 --> Execute the Program RBDMOIND
    12 Error --> Dispatch ok
    Inbound Status Codes
    50 Error --> It will go for ALE Service Layer
    56 Error --> Idoc with Errors added
    51 Error --> Application Document not posted
    65 Error --> Error in ALE Service Layer
    for 51 or 56 Errors do the following steps
    goto WE19 > give the IDOC Number and Execute>
    Press on Inbound function Module
    for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
    kindly reward if helpful.
    cheers,
    Hema.

  • XI and R/3 Installation on One System

    Hi,
      I am new To XI and I want to install XI and R/3 in My Local System. Can i install both in one system (OS)? If yes, what is the minimum requirement for this?
      If any one have did this, please help me.
    Thanks,
    Sridhar

    Hi Sridhar,
    Download this Doc and Fallow...
    http://help.sap.com/bp_scmv150/documentation/SCM50_system_reqs.doc
    Fallow the below documentation...
    System Requirements for
    SAP Best Practices for SCM 5.0 Scenarios
    Use
    The objective of this document is to help system administrators to prepare an SAP SCM system for the installation of one or more SAP Best Practices scenarios and to ensure the system setup meets the requirements for the installation.
    This document does not provide information on how to set up the entire SAP SCM system, itself, but provides you with useful additional information and troubleshooting tips.
    System Landscape
    To install one or more of the SAP Best Practices for SCM scenarios from this CD, you should refer to the system landscape described below and compare it with your own existing system landscape as an installation prerequisite.
    Please note that the support package levels indicate the minimum support package level your system landscape should have. If higher support packages exist, we recommend that you install the highest available support package.
    To install and use any SAP Best Practices scenario, you must have installed an SAP R/3 and an SAP SCM system.
    SCM 5.0: Complete Version
    SAP SCM 5.0 contains the following business application components on one system platform:
    •     SAP APO 5.0
    •     SAP EM 5.0
    •     SAP ICH 5.0
    The following table provides an overview of the software component details of the SAP SCM system:
    Software Component     Release     Level     Highest Support Package     Short description of Software Component
    SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
    SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
    ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
    PI_BASIS     2005_1_700     0007     SAPKIPYI77     Basis Plug-In (PI_BASIS) 2005_1_700
    SAP_BW     700     0007     SAPKW70007     SAP NetWeaver BI 7.0
    SAP_AP     700     0004     SAPKNA7004     SAP Application Platform 7.00
    LCAPPS     2005_700     0002     SAPKIBHD02     LCAPPS 2005_700 : Add-On Installation
    EA-IPPE     400     0003     SAPKGPID03     SAP iPPE (EA-IPPE) 400
    SCM     500     0004     SAPKY50004     Supply Chain Management 5.0
    SCM_BASIS     500     0004     SAPK-50004INSCMBASIS     SCM Basis 5.0
    QIE     200     0004     SAPK-20004INQIE     Quality Inspection Engine 2.00
    BI_CONT     702     0002     SAPKIBIHP2     Business Intelligence Content
    Optimization Server Version:
    Identifier     Version
    CTM01     5.0_REL SP04, 356375
    DPS01     5.0_REL SP04, 356375
    CS01     5.0_REL SP04, 356375
    SEQ01     5.0_REL SP04, 356375
    SNP01     5.0_REL SP04, 356375
    VSR01     5.0_REL SP04, 356375
    Live Cache SP05 (LCA50.05, LC 7.6.00.22)
    LiveCache version:     KERNEL     7.6.00   Build 022-123-119-055
    DBM server version:      DBMServer 7.6.00   Build 022-123-119-055
    Operating system:     SunOS
    LCA version:          Module          50   Build 05
    SAP APO GUI
    We recommend that you install the SAP APO specific SAPGUI add-on, which is required for certain business transactions.
    SAP ECC System
    SAP ECC Enterprise with Extension Set 1 (for the SAP Best Practices scenario Fulfillment Visibility we used an SAP R/3 Enterprise system with Extension Set 2)
    Software Component     Release     Level     Highest Support Package     Short description of Software Component
    SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
    SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
    ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
    PI_BASIS     2005_1_700     0007     SAPKIPYJ77     PI_BASIS 2005_1_700
    SAP_AP     700     0004     SAPKNA7004     SAP Application Platform
    SAP_APPL     600     0004     SAPKH60004     Logistics and Accounting
    EA-IPPE     400     0004     SAPKGPID04     SAP iPPE
    EA-APPL     600     0004     SAPKGPAD04     SAP R/3 Enterprise Add-On PLM, SCM, Financials
    FINBASIS     600     0004     SAPK-60004INFINBASIS     Fin. Basis
    BP-ERP05     600V2     0000          SAP Best Practices All-in-One based on ERP 2005 (ECC 600)
    SAP XI System
    If you want to install the SAP Best Practices scenario Supplier Managed Inventory, Release Processing, Responsive Replenishment, Contract Manufacturing Procurement & Supply Network Inventory, Kanban-based Replenishment, you also need to implement an SAP XI system.
    Software Component / PI Content     Release     Level     Highest Support Package     Short description of Software Component / PI Content
    SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
    Content for SAP BASIS     700     0007          XI content for SAP BASIS 7.0
    Content for SCM     500     0004          XI content for SCM 5.0
    Content for SCM BASIS     500     0004          XI content for SCM BASIS 5.0
    Non-ABAP components, such as the Integration Builder and the Integration Repository, must also be installed and have the respective support package levels.
    For uploading the content in the XI System, refer to SAP note 836200.
    Checklist after the System Setup
    •     SCM Menu
    After you have installed the SCM System, you may have to set up the menu that you want to use.
    To do this, access transaction SE38 and run the report /SCMB/SM_VERS.
    Choose Full Version and then, choose Execute.
    •     Check Planning Version 000
    In your SAP SCM system, use the following path:
    SAP Menu  Advanced Planning and Optimization  Master Data  Planning Version Management  Model and Version Management
    Make sure that the planning version 000 – Active Version is available.
    If this planning version is not available, this means that the LiveCache has not been initialized. Proceed with the LiveCache initialization before you start with the installation of any SAP Best Practices scenario.
    •     Check that PSE services have been activated
    Use transaction “strust” in your SCM system. All services should have a green light. If it is red, activate all of them. There is no need to reboot the system afterwards.
    OPTIMIZER
    1.     Checking that the Optimizer has been installed
    Transaction SM59  RFC Destination  OPTSERVER_CTM01  Test Connection
    If the connection cannot be established, this may be due to the following reasons:
    •     the Optimizer has not been installed
    •     an error occurred during the installation of the Optimizer
    2.     Checking that the Optimizer SP’s have been installed
    Open transaction /SAPAPO/OPT09. The Optimizer Support Packages should be identical to the Support Packages of the SCM system.
    •     Ensuring that the APO relevant PI Settings are activated in SAP ECC
    You have to make sure that the business transaction events are active in the SAP ECC system. Only if these events are active for the SAP APO integration, will changes to the transaction data be transferred from the SAP ECC system to the SAP APO system. This setting should have already been performed; this is just a reminder in order to avoid possible problems later on. Use the following procedure:
    In your SAP ECC system, open the transaction BF11.
    Confirm the message The table is cross client.
    On the Change View: Application Indicator”: Overview screen, check that the applications ND-APO, PI-EM and NDI are active, i.e. selected. If they are inactive, select the check box to activate them.
    Choose Save and go back.
    Web Communication Layer (WCL)
    Ensure that the WCL is installed correctly: Usually the WCL should be connected to the client 001 of the SCM system. Use transaction /saptrx/wcl_search in the SCM system to open the WCL. If a logon pop-up appears, then the WCL is set up correctly. If the message “WCL is not installed...” appears, the respective set up settings should be checked and corrected, if necessary.
    Additional Information
    For additional information on issues such as architecture, sizing, platforms, and upgrades, refer to following page on the Service Marketplace:
    alias /SCM  SCM Technology
    For information on system monitoring, system administration, volume testing etc., check SAP note 572003. You can also refer to the Service Marketplace, using the alias /SCM  SCM Technology  Table of Contents  Solution Management   Best Practices for mySAP SCM Solution Management.
    Thanks,
    Satya Kumar..

  • HT201342 i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my  import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and fai

    i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my  import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and failed. Something might i doing wrong

    I just had the same problem, I've updated to 10.6.8 yesterday, and since then the browsing are very slow, no matter what broswer I am using, the upload download speed are still the same. But browsing just take forever, It takes for example google.com 30 seconds to load. I have Extream high speed internet connection, 3 other computers, and the only one is having this problem is the Mac after the update.
    Something in this update screwed my browsing capabitilties, I tried downloading Crome browser, same issue.
    I hope there is a way beside TimeMachine to revert the latest update. I don't want to reformat as I am sure as soon as I am going to do the update it will cause the same problem.
    Model Name:    iMac
      Model Identifier:    iMac11,3
      Processor Name:    Intel Core i7
      Processor Speed:    2.93 GHz
      Number Of Processors:    1
      Total Number Of Cores:    4
      L2 Cache (per core):    256 KB
      L3 Cache:    8 MB
      Memory:    12 GB
      Processor Interconnect Speed:    4.8 GT/s
      Boot ROM Version:    IM112.0057.B00

  • I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack.  The problem is that the sound is extremely muffled and bass-heavy, with little treble.

    I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack.  The problem is that the sound is extremely muffled and bass-heavy, with little treble.  I have to turn the bass control on the stereo receiver to pratically zero in order for the sound coming through the stereo to be acceptable.  Is there a setting on either the iPod or the stereo that I need to change in order to fix this?

    The phono input is for a phonograph.  The iPod does headphne output is not that same as a phongraph output.  Does th stero have an AUX input?  That should be compatible.

  • Just registered to Creative cloud CC and I need a system, who is running one now like champ?

    Hello, there
    I just registered to Creative Cloud CC and I need a system, who is running one right now that runs like champ?
    I got many problems before with older versions and never get it to run good.
    what really is a system that I should buy whether is a brand build it or one that I need to put togehter, I don't care.
    I need a system that it should be able to run, edit and out put with no problems, in Premiere and After Effects.
    is there anyone out there that can share his system information that is running good?
    I'll really appreciate it.
    have a wonderful day
    Freddy

    I agree with Peru Bob, call Eric at ADK, they are the absolute best source for an satisfactory editing machine tailored to your specific requirements with great follow-up support.
    Otherwise we have to have a better idea of what media you will be using and what your workflow and output would be before anyone can answer your request.
    There is a world of difference between handling Standard Definition DV material and RAW 4k media.  "cc_merchant" referred you to Harm's data on our web site.  Especially look at the "Tweakers Page" and "What kind of PC to use?" page.
    There are very few off-the-shelf computers that work well without some small additions.  For instance, you rarely find one that has two hard drives as suggested for satisfactory editing, the correct amount of memory and the best GPU for your application.

Maybe you are looking for