OBIEE Samples and installation problem... NAT vs. Bridged

So, here's the quick problem... when running the Samples in VirtualBox and the Networking is set to NAT mode all is good all services start, etc. when the Network is set to Bridged mode I can't get the BIServer and the Presentation server to start?
I've added my IP to the /etc/hosts file as laid out in the install doc but still a no go.
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 3918 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 3917 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 3919 | Alive
coreapplication_obips1 | OracleBIPresentat~ | N/A | Down
coreapplication_obis1 | OracleBIServerCom~ | N/A | Down
How do I fix this?

I was looking for corresponding time stamps but got close as I could. I hope this is enough...
from the SAW log... looks like it repeats.
[2013-05-15T18:26:55.000-07:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.6.2 (Build 120605.2000 BP1 32-bit) are starting up.[[
File:sawserver.cpp
Line:455
Location:
     saw.sawserver
ecid:
[2013-05-15T18:26:57.000-07:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (obieesampleapp.us.oracle.com) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:324
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-15T18:26:57.000-07:00] [OBIPS] [ERROR:16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Unable to create a system user connection to BI Server during start up. Trying again.[[
File:odbcuserpoploaderimpl.cpp
Line:325
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-15T18:27:02.000-07:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (obieesampleapp.us.oracle.com) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:324
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-15T18:27:02.000-07:00] [OBIPS] [ERROR:16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Unable to create a system user connection to BI Server during start up. Trying again.[[
File:odbcuserpoploaderimpl.cpp
Line:325
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
from the nqquery.log...
[2013-05-16T07:54:27.000-07:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.6.2 (Build 120605.2000 BP1 32-bit) are starting up.[[
File:sawserver.cpp
Line:455
Location:
     saw.sawserver
ecid:
[2013-05-16T07:54:28.000-07:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (obieesampleapp.us.oracle.com) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:324
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:28.000-07:00] [OBIPS] [ERROR:16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Unable to create a system user connection to BI Server during start up. Trying again.[[
File:odbcuserpoploaderimpl.cpp
Line:325
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:33.000-07:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (obieesampleapp.us.oracle.com) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:324
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:33.000-07:00] [OBIPS] [ERROR:16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Unable to create a system user connection to BI Server during start up. Trying again.[[
File:odbcuserpoploaderimpl.cpp
Line:325
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:38.000-07:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (obieesampleapp.us.oracle.com) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:324
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:38.000-07:00] [OBIPS] [ERROR:16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Unable to create a system user connection to BI Server during start up. Trying again.[[
File:odbcuserpoploaderimpl.cpp
Line:325
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:43.000-07:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (obieesampleapp.us.oracle.com) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:324
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:43.000-07:00] [OBIPS] [ERROR:16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Unable to create a system user connection to BI Server during start up. Trying again.[[
File:odbcuserpoploaderimpl.cpp
Line:325
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:48.000-07:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (obieesampleapp.us.oracle.com) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:324
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2013-05-16T07:54:48.000-07:00] [OBIPS] [ERROR:16] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Unable to create a system user connection to BI Server during start up. Trying again.[[
File:odbcuserpoploaderimpl.cpp
Line:325
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
Edited by: Adam M on May 16, 2013 11:00 AM

Similar Messages

Update and installation problems

I am having issues with Creative Cloud updates and installations.
None of my Apps will update. I am prompted to update, I click the update button, Cloud says "updating software" but all attempts stop at 0%.
Similar issues Installing Apps. Installations start but all stop at 90%. No error messages at all.
This is extremely frustrating and all my Apps are in need of updates to fix minor bugs which are effecting my workflow.
Can you help?

We can't know. You have not provided any exact system info or other details like the install/ update logs. You can always run the cleaner and start from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Troubleshoot Creative Cloud download and install issues
Mylenium

BF2 disk drive and installation problems (Windows XP Home on a MBP)

So I've taken the leap and installed Windows XP Home on my MacBook Pro. It makes me cringe.
It was not an easy process. Installing Windows took me about 4 hours. There would be an error, I would have to eject the disk, reboot, and the promised 39 minutes seemed to be 5 times slower than it actually was. By the time I got Windows installed it seemed to be running ok, until yesterday.
Yesterday, I tried to install Battlefield 2 Deluxe Edition onto Windows. I inserted the first disc (1 of 5) and my MBP spit it right back out. This happened almost 10 times until finally when viewing "My Computer", the MBP accepted the disk. I then started to install. It froze up a couple of times, so I restarted. Same problem: the MBP wouldn't accept the disk. It finally did, I started install and it finally went. And then, about 4 or 5 percent of the way in, it stopped and said somethign along the lines of "BF2 installation failed, please restart install from the beginning". I did, and got the same message.
Any ideas?
2.0GHz MacBook Pro Mac OS X (10.4.6) 1.5 Gb RAM

Now that I have thought about it, I would have to guess that the problem is my SuperDrive.
That would attain for the slow Windows Installation and the BF2 problems.
I also am having problems importing a CD into iTunes. Seems like enough of a problem to make a visit to the Apple store.

Connectivity and Installation Problem in Developer suite 10g

Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
6. There is no middle tier in this case. Only One server as domain
and client pcs.
Please guide me,matter urgent.
Thanks in advance

Regarding this point -
1.
Then you should be able, for testing purposes, to do the same from other Clients.
Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
2.
For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
(We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
Please explain the steps to proceed .
thank you

OBIEE Version and Installation

Hi,
In our server Obiee is installed, i want to check what version installed and then please let us know how to upgrade.
Thanks.

Hi,
Yes, You Can.
C:\Oracle\Middleware\Oracle_BI1\OPatch>opatch version
OPatch Version: 11.1.0.9.9
You want to check version user opatch version command in putty.
Upgrade:
11.1.1.6 to 11.1.1.7
You have to apply patch files better you can get those patch files from oracle support team.
They will provide document for patch installation procedure also.
Note : If you want to step by step document for Patch upgrade? Wait today am going to post my blog please refer my blog.
http://satyaobieesolutions.blogspot.in/
I have posted in my blog for patch upgrade 11.1.1.6.0 to 11.1.1.6.9.
http://satyaobieesolutions.blogspot.in/2013/05/obiee-upgrade-111160-to-111169.html
Thanks,
Satya Ranki Reddy.
Edited by: Satya Ranki Reddy on May 27, 2013 8:25 PM

Broadband and installation problem

I have 4 computers connected via LAN/router to TalkTalk:
PC
Intel Mac Pro
G5 1.6
eMac 17"
Up till the switch to TalkTalk all 4 were happily connected to the internet.
Now, while the first 3 are connecting OK, the eMac seems to be continually
stalled or very slow. I have checked the settings, which are the same as
for the other 2 macs.
I've also repaired permissions and Disc Warriored.
The eMac even seems to find it slow to access the router (buffalo WBMR-G54)
I am currently re-installing the OS but it's stalling on the installation of disc2
What other troubles can I shoot?
peter

Is it possible that the eMac slowdown is unrelated to to the change in ISP? That none of the other Macs, with similar settings, is affected, does point to something specific to the eMac.
How much free space is there on the eMac's hard drive? If the drive is nearing full, that can cause problems up to complete shutdown and failure to boot, as the OS runs out of space for it's cache files. You really want to keep a minimum of 5 GB free space available, both for cache files and to allow space for an About the Archive and Install Feature if needed. Lack of space could also account for stalling when trying to do an A&I.
If that's the case, you can use one of your other Macs as source with the eMac as target in FireWire target disk mode, copy user files and the like from the eMac to the other Mac's drive, then do an erase and install. If you do an erase and install on a computer that's several years old, it's worth the time to first use the Installer option to do a one-pass write zeros; that will cause the hard drive to update it's firmware map of bad disk sectors to avoid using.
Disk Warrior is invaluable for checking disk directory structures and making repairs, but it doesn't claim to do anything else, such as checking the integrity of the drive itself. If you use Disk Utility to check th eeMac's drive, does the SMART status show as "verified"?
If you normally shut down an OS X Mac overnight or leave it in system sleep, the cron maintenance tasks cannot run in their nominal 3 am timeframe. (Display-only sleep allows the maintenance tasks to run). Tiger 10.4.2 and later will (nominally) force the maintenance tasks to run after sufficient time has elapsed, although the timing on that is subject to dispute. You can leave the Mac in display-only sleep a weekend or two a month; you can manually Force Background Maintenance; or you can use a third-party utility such as OnyX to run the maintenance. Note that any system utility you use must be compatible with the OS version (e.g., use the Tiger version of OnyX with 10.4.x).
Finally, installing Memtest and running it in single-user mode per it's insturctions will let you check for possible bad RAM bits.

Start Up and Installation Problems

Hey all, sorry if this is a repost, but I'm running out of troubleshooting options and patience. I have a Powerbook G4 and just participated in the battery recall, after which I've started having these problems. I followed the directions for replacing the battery; drained the old one until the computer slept, removed the old battery effectively powering down the computer, replaced with new battery, then tried to restart. However, now when the computer restarts, instead of the Mac OSX and progress bar, I get the circle with a slash through it on the grey screen. I can't remember the technical name for it, but I followed some simple troubleshooting, and nothing is working. I opened up disc utility from the install CD, and the first time, my HD showed up, but as a read only disc, so I wasn't able to perform any disc repair. I ran hardware test, and it all came back fine. Then I started up using an old HD as a firewire drive, which worked fine, but when I tried to use disc utility from there, the program froze, and wouldn't find any discs mounted. I tried disc utility from the install CD again, and same result. No discs were found and the program froze in the search process. So, trying to run a reinstallation from the install CD, I get to the point where I select the drive on which to install, and no drives are listed. If I plug in my external drive, it pops up right away. And now, running off the external drive, if I go to My Computer, that external drive is the only one listed. I can't find the directory for the hard drive in my computer. It's as if it just disappeared, except for the fact that if I hold down the option key when starting up, it shows up as a Mac OSX drive that can be started up from, and the hardware test for mass storage came back as passed. So, if anyone has any ideas for me, I'd be greatly appreciative. Thanks for reading!
Sean

You cannot install an earlier version of OS X than the machine came with that is why your installation won't work. The problem probably is that your Original Install Disc that came with the machine is a later version than 10.6.3.
If you are trying to determine if your HD is failing there are a couple of things you can check. First in Disk Utility (Applications - Utilties - Disk Utility) check the S.M.A.R.T. status of the HD. If it says anything but VERIFIED yes your HD is in trouble. The next thing you can do is run Apple Hardware Test. Here is an Apple Advice Letter that will provide instructions. Remember you will need the ORIGINAL Install Disc that came with the computer. Run AHD in extended mode to be the most thorough.
http://support.apple.com/kb/HT1509
It would also help to advise us exactly what are you trying to achieve, then we can advise you.
Roger

MS updates download and installation problem.

I am using Windows Server 2008 R2 Standard. I saw four important updates available and when I'm trying to install those four updates it fails to install. I tried several attempts, but it failure. Except those four updates the remaining
have been successfully installed. I wonder what the problem was occurring?
The installation failure updates list are as below,
1. Security Update for Windows Server 2008 R2 x64 Edition (KB2871997)
2. Security Update for Windows Server 2008 R2 Edition (KB2872339)
3. Update for Windows Server 2008 R2 for x64-based Systems (KB2830477)
4. Update for Windows Server 2008 R2 x64 Edition (KB2882822)
Below is my MS updates installation error message,
Error(s) found: Code 80070005 Windows Update encountered an unknown error.
Can any one please assist me ASAP?
Thanks,
Tariq M.S.

On Mon, 16 Jun 2014 05:23:48 +0000, YaliInfo wrote:
Below is my MS updates installation error message,
Error(s) found: Code 80070005 Windows Update encountered an unknown error.
Can any one please assist me ASAP?
http://support.microsoft.com/kb/968003
Paul Adare - FIM CM MVP
The OSI seven-layer stack does not appear to have been invented by the
followers of Zen. A cornerstone of Zen is the focusing on reality and the
avoidance of misleading conceptual abstractions. -- Alex Gillespie

IMac Start up problems, and installation problems

Apple iMac
I've recently purchased a copy of 10.6.3 as a substitute for my 10.6 disc.
On trying to re-install my internal hard drive, after it wouldn't boot.
All Documents etc are on an external 1TB External Drive, also my documents are on my MBP.
1) Been trying to install for well over an hour, and still it says 28mins?
2) Tried to clone my MacBookPro hd over, via Firewire, and waited nearly 12+ hours to no avail. Going down the route with Carbon Copy Cloner, and also Disk Utility, and even tried to install via Firewire cable, on that occasion it got to 45 minutes left, and all went quiet.
3) Have run disk utility loads of times to check the integrity of the drive, it says Verified,
4) Have now tried to reinstall with the original disks that came with the mac, after reformatting the hard drive, and selecting my options, the installer starts, and when reboots, take ages, white screen, I don't even get the prompt to insert the the second cd.
5) On this basis, a) Is my hard drive failing
b) Is my problem the superdrive.

You cannot install an earlier version of OS X than the machine came with that is why your installation won't work. The problem probably is that your Original Install Disc that came with the machine is a later version than 10.6.3.
If you are trying to determine if your HD is failing there are a couple of things you can check. First in Disk Utility (Applications - Utilties - Disk Utility) check the S.M.A.R.T. status of the HD. If it says anything but VERIFIED yes your HD is in trouble. The next thing you can do is run Apple Hardware Test. Here is an Apple Advice Letter that will provide instructions. Remember you will need the ORIGINAL Install Disc that came with the computer. Run AHD in extended mode to be the most thorough.
http://support.apple.com/kb/HT1509
It would also help to advise us exactly what are you trying to achieve, then we can advise you.
Roger

I need a solution for a lab view apllication and installer problem

I ,ve already deployed an application and an installer, when i run the executable and the installer on my laptop it run well,
but when i run them on a computer that does'nt have a labview it gives me a messege says that i need to install the labview run time engine 8.5
actually i 've included the run time engine to the installer and i 've installed the run time engine from labview 8.5 cd,
but it still give me the same messege.
information you might need:
I'm using in my project the following:
-network shared variable
-data base connectivity functions
-report generation functions
-visa functions
so if any one can help me with this up?????????
Mahmoud Alshair
Intelligent Systems Integrator ( ISI )
System Developer
Solved!
Go to Solution.

Dear Mahik
I 'll post some snapshots of my project here so you can checke it out.
just let me tell you that when I run my app. & my installer on a computer that has a lab view and DSC it works well,
but when I run it on computer that doesn't have a labview it gives that error messege.
i'm hopefullt waiting for your reply with some solution
thanx
Mahmoud Alshair
Intelligent Systems Integrator ( ISI )
System Developer
Attachments:
Building My App.2.JPG ‏80 KB
My Project.JPG ‏118 KB
Building My App..JPG ‏88 KB

WRT54G v.5 - hookup and installation problems

I just bought a new computer and I'm having a heck of a time getting my new router hooked up. It's a Wireless-G 2.4 GHz broadband router, WRT54G v. 5. I called the technical support line and got a lady who, while she tried and tried to help me, didn't really help at all.
My initial problem is that, when I run the CD, it gets to the screen that tells you what lights should be on and I click "next" and it goes through the whole "Checking your computer settings..." deal. When that finishes, a screen pops up that says, "Please enter your password." What password??? I've tried every word that I have ever used anywhere on my computer, as well as tried just hitting enter while leaving it blank, and it just goes back to the same screen and repeats the process again. The lady on the customer support told me to do a manual setup because sometimes the CD doesn't do much good and tried to guide me through the process..
I opened my browser, went to that 192.168.whatever site, and had to enter in "admin" in the password box (which it made me do three times) and then it went to a blank screen. Over and over, no matter what port I had my router hooked up in, no matter how many times I reset the darn thing, even after installing the firmware on the site, the screen for the manual set-up came up blank. I was frustrated and I could tell she was, too, so I told her I would mess around with it more and maybe call back later.
Does anyone have any clue what I need to do to get my router set up? It's not a matter of bad cables (something she mentioned) because it was working fine before I decided to buy another computer and went to hook it up through that. I would be forever grateful to anyone who may be able to help me out!

Okay, I finally got past the password screen and got to a page that said I needed to manually enter my router settings. The things were Connection, IP Address, Sub-something Mask, Gateway (?), DNS 1, and DNS 2. Considering I'm hardly some computer expert, I have no idea what half mean, and I don't know what to put for the other half. The top clearly reads "Please contact your ISP for this information" so I called my ISP and the guy gave me TWO IP addresses - one he said was my "router IP" and one was my "modem IP" which I had no clue I had two IP addresses in the first place..? So then I tried asking him about the other info. I'm supposed to enter and he said, "You know, ma'am, if you're having trouble with your router, you need to contact the router company, not us" and I said, "It SAYS in the setup to contact you!"
So now I have no idea who to contact, because neither Linksys nor my ISP seem to be able to tell me anything.. ergh. And all of the instructions about setting it up are for the set-up that you access through your web browser, which is the thing that only pulls up blank pages for me.

Adobe Creative Suite 6 Download and Installation Problem

I have purchases Adobe Creative Suite 6 and went to download it. It downloaded a Package.exe and when I ran setup it ran for hours and in the end said it was complete, but I have nothing to show for it but some Zip files and some setup files which I have run and still have nothing. What am I doing wrong?

run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
restart your computer.
if there were no errors during the previous installation attempt, click setup.exe

Please advice me about JCOP tools and installation problem

Hello
Somebody please suggest me what should I solve this problem.
I'm currently developing the applet which activate when the SMS send to trick this applet, then it will return the SMS back to the sender which contain a location information of cellsite.
I used the Axalto tools to generate my code. But the problem is when I put this code simulting with JCOP, it shows this error
cm> upload "D:\Sourcecode\SMS_Proactive_CMD\bin\SMS_Proactive_CMD\javacard\SMS_Proactive_CMD.cap"
=> 80 E6 02 00 17 0A 53 4D 53 5F 50 72 6F 61 63 74    ......SMS_Proact
    08 A0 00 00 00 03 00 00 00 00 00 00 00             .............
(3350 usec)
<= 00 90 00                                           ...
Status: No Error
=> 80 E8 00 00 FF C4 82 02 7B 01 00 26 DE CA FF ED    ........{..&....
    02 02 04 00 01 0A 53 4D 53 5F 50 72 6F 61 63 74    ......SMS_Proact
    11 53 4D 53 5F 50 72 6F 61 63 74 69 76 65 5F 43    .SMS_Proactive_C
    4D 44 02 00 21 00 26 00 21 00 12 00 1E 00 6E 00    MD..!.&.!.....n.
    1A 01 16 00 0A 00 41 00 00 01 0D 04 EF 00 04 00    ......A.........
    00 00 00 02 01 00 04 00 1E 02 02 01 07 A0 00 00    ................
    00 62 01 01 06 02 10 A0 00 00 00 09 00 03 FF FF    .b..............
    FF FF 89 10 71 00 02 03 00 12 01 0E 53 4D 53 5F    ....q.......SMS_
    50 72 6F 61 63 74 2E 61 70 70 00 2E 06 00 1A 00    Proact.app......
    00 43 80 03 0A 00 04 07 02 00 00 00 3D 00 40 81    .C..........=.@.
    00 00 81 01 01 08 80 02 00 07 01 16 00 02 10 18    ................
    8C 00 15 18 01 87 02 18 01 87 05 18 01 87 08 18    ................
    8D 00 0D 87 09 AD 09 05 8B 00 11 10 79 90 0B 7F    ............y...
    00 0E 10 48 90 0B 7F 00 0C 7A 02 31 8F 00 18 3D    ...H.....z.1...=
    8C 00 0B 2E 1B 8B 00 0A 7A 00 20 7A 05 21 18 8D    ........z. z.!..
    00 19 87 02 18 8D 00 1A 87 08 1D 73 00 C6 00 02    ...........s....
    00 02 00 09 00                                     .....
(4805 usec)
<= 6A 80                                              j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting executionOn the other hand, when I use the GEMPLUS App. Manager Tool to load and install the applet into SIM card, it can load package in to the card but it can't install. It shows that
6985 Conditions of use not satisfiedPlease help me, Thank you for you kind.

Hi,
I am using JCOP and getting the exact same error message as you, only not when simulating, when trying to install the applet to the card.
When I simulate the card there is no problem at all, but when trying to upload, that error message appears, no matter what i try to upload.
My e-mail adress is [email protected], please contact me If you manage to solve the problem or you have any questions.
Best regards,
Pierre

Path and installation Problem in suse linux

i have installed jdk1.3 in suse linux.
when i give /usr/lib/jdk1.3/java or javac it runs the class or compiles the .java file as expected.
But the problem is if i give /usr/lib/java/bin/java
/usr/lib/java/bin/javac
/usr/lib/java/bin/javap
it runs only the java .
what can i do.

Hi,
It could be because different versions of java are installed on your Suse machine. If you type java -fullversion or java -version (it might be double -) , this will give you a clearer picture on the versions of java installed.
Also which java or which -java can help.
best,
kev

Ipod Nano formatting and installation problems

[IMG]http://i4.photobucket.com/albums/y111/niedec/screen.jpg[/IMG] I get this screen every time I try to install and format my iPod Nano using the included software. What should I do?

Hi niedec,
For starters, download the latest iTunes and iPod Updater from Apple. Chances are that they are more up-to-date than the software you got on CD:
<a href=http://www.apple.com/ipod/download/">Get iPod Updater</a>
<a href="http://www.apple.com/itunes/download/">Download iTunes 6
maz

OBIEE Samples and installation problem... NAT vs. Bridged

Similar Messages

Maybe you are looking for