Object set function

For some reason the set methods never run, although other
test ones I've written do.
Fla file:
var oTest:Test = new Test();
oTest.sVar("Success!");
Test.as

Nevermind, ignore me :-( sorry

Similar Messages

  • Error while saving for Objective setting

    Hi,
    While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
    <u>Error documentation is as follows</u>
    <b>Diagnosis</b>
    Entries in table HRPAD605 cannot be edited in connection with customizing object PDST      T as table HRPAD605 does not belong to customizing object PDST      T, according to the object definition.
    <b>System Response</b>
    The function terminates.
    <b>Procedure</b>
    Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
    Correct the object definition or the entry for the Transport Organizer interface.
    Thanks

    Hello,
    Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
    Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
    The report RHSOBJCH corrects the missing HR entries in the OBJS table.
    This step you need to perform only once. For OSA you need to overtake
    *5020 up to *5026, also PAD605,606 and 607 references.
    When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
    Hope this helps,
    Regards and Groetjes,
    Maurice

  • Objective Setting and Appraisals in Portal

    Good Morning,
    I have that implement the component Objective Setting and Appraisals in the portal.
    I want know that report standard can display in the portal for this component and the functionality standard of this module in the portal for the employee and Manager in the portal not in ECC.
    Kind Regards,
    Sanew2

    Thank You Lincoln Gupta  for you response,
    If i want a report for the manager, i have that request for a consultant of BI?
    Kind regards,
    sanew2

  • Find Object.vi function of 3D picture control - when object not found

    I am using Labview 8.2, and this post is regarding the 3D Picture Control.
    I am wanting to make use of the "Find Object" VI to either return a reference to a named object, or otherwise determine that it does not exist yet.  However, if I call it with the name of an object that doesn't exist yet (i.e. just any random string), it returns an error message that arises from the attempt to release a queue (the reference to which gets lost when crossing a zero-iteration For Loop's tunnels), instead of an error message that says "Object not found" which I would find much more useful.  With a simple modification of the "Find Object.vi" function, this behaviour can be changed, by replacing the For Loop's tunnels with shift registers.
    The problem with the current function is that the error is not an intentionally thrown error, rather just the result of the queue's refnum being set to the default 0 as it "exits" the For Loop, since in the situation that an object is not found, the code passes a 0 to the N terminal.
    The attached images show the problematic code and the simple modification
    Attachments:
    Find Object.png ‏2 KB
    Find Object_modified.png ‏2 KB

    pauldavey,
    I agree with you - the current way of handling the case of an object not being found does not appear to be ideal.
    This was reported to R&D (# 43D8GSVQ) for further investigation.
    Thanks for the feedback!
    Regards,
    Simon H
    Applications Engineer
    National Instruments

  • Is it possible to configure Team calibration for Objective Setting Appraisals in EHP7

    Hi Friends,
    We are on EHP7. We have implemented objective setting appraisal for our client.
    We have created an appraisal template under category group "Personnel appraisals". We have configured the VA, VB, VC, Column ids.  Status tab flow is used from In preparation - Completed.
    The enhancements are used to accommodate customer specific calculations for the scores based on the final ratings.
    An additional requirement from the client is; once the appraisal process is over for a team; the team manager should be able to see the scores of his direct reportees in the MSS.
    1) He should be given a provision to modify the final rating score; incase if he finds that one of the team members deserve a better score in line with the comparison of other team members. He should be able to call the template and be able to revise the final ratings from his MSS directly.
    2) When he modifies the final ratings by calling the appraisal template on the MSS; that new score should be stored in the appraisal template (database tables); that is; this should overwrite the final scores which was initially calculated during the final appraisal discussion between the apprasier and appraisee. This new values should be taken for all reporting or new compensation revision process.
    Should this requirement be addressed by Assessment of Employees and Calibration Process for Employee Assessments standard configurations?
    If that is the option; I have already done these settings for flexible performance appraisal.
    But in the MSS > under Talent Management > Assessment
    We are getting a blank screen in the "In process & Completed " tabs. No employee is listed.
    The calibration grid is empty. But under under talent profile; we are able to see the names of the team members.
    Is there any other method available for this purpose ?
    Request your comments on options to deliver this functionality.
    Thanks.
    ER.

    Hi Srujan,
    For every paying company code you can have multiple sending company codes.
    You can make this configuration in FBZP > Paying company codes tab.
    Once in 'Paying company codes', here click on 'Company codes' button on top right.
    This means you will need all the FBZP setup for your paying company code only.
    Also, please refer to below link to configure cross company settings
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?QuickLink=index&overridelayout=true
    Also, this document will be useful:
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FIBP.pdf
    Cheers,
    Zubin

  • Performance Management/Objective setting and Appraisals - To Hide elements

    Hi All,
    In PMS/Objective setting and Appraisals module, is there any BADI available to Hide elements( Criteria & Criteria group) on Sub status wise. Meaning, suppose i have Substatus A, B, C & D in status "2" ( In planning) and one of the VC element should be hidden in Status = 2 & substatus = A, B. But in "C" & "D" sub stauts it should be visible.
    If BADI is not available then is there any possible way out for the same.
    Thanks,
    Ashwini.

    There is no badi for this, it slipped of radar during the development of the hide element functionality.
    The only why to achieve the same would be by having a customer own UI and control it on UI level, but its an ugly way which I do not recommend.
    Regards and Groetjes,
    Maurice Hagen

  • Objective Setting & Appraisals - Value Descriptions

    Hi,
    We use Objective Setting & Appraisals functionality for competence assessment. Here we use a 'Qualification' which has specific proficiency descriptions in the qualifcations catalog (not the default value). Now under the 'Value Descritpions' tab if I check the 'default value' for this qualification in the 'phap_catalog' I see the default values for the proficiency are brought it and not the specific proficiency descriptions in the qualifcations catalog.
    Our aim is to use this qualification as a reference in the template so that the defined proficiencies are displayed under the '<u>info'</u> hyperlink in the appraisal document.
    Any assistance on this please.
    Regards
    Binu Jacob

    Hi Binu,
    I am not entirely clear about your requirement, but in OOHAP_VALUE_TYPE, for a specific proficiency value, if you have maintained a description for the value under 'Value description' then it will be displayed on the form within the 'Info' button.
    Regards,
    Priya.

  • Objective Setting process Need Inputs

    Hi All
    When I try to set my Objectives setting process , Steps to reproduce the problem
    1 Objective Template Created 05-mar-2009
    2 Competecncy Template created 05-mar-2009
    3 Appraisal Template created 05-mar-2009 Cascade process and position Hierarchy has been chopsen while publishing the plan.
    PLan period is 05-mar-2009 tp 31-mar-2009.
    My objective setting period is 05-mar-2009 end date is 10-mar-2009
    I have publsihed the plan and it's been notified to the respective as per eligibility profile.
    Now Manager has set his objectives using Employee self service and finished his objectives.Now he has to cascade these objectives to his reportees via Manager self service.
    Manager has completed his processes and finshed his objective setting processes.
    He has chosen Manager Responsibility to cascade the Objectives to his subordinates.
    But he is not able to see the objectives or the Employees who comes unders him.But I am able to see the people in his hierarchy by using the functions view people people in appraisal hierarchy.
    Now what and where the things were went wrong !!
    Am i missing any set procedures !!!
    Any thoughts on this would be greatly appreciated.
    Cheers
    Kumar

    You need to login as the topmost person in the position hierarchy. and then set objectives for the sub-ordinates.
    The sub ordinates can then assign these objectives down the line.
    make sure the objective setting process is complete for them before they can assign objectives to the next level.
    Regards,
    -Debo

  • Is it possible to get a function pointer to a getter/setter function

    Please do not respond with questions asking why, what usage, or suggesting alternative ideas.
    Looking for a yes/no answer, from someone who actually knows.
    The generally used workaround for this, is to use a regular function instead of a getter/setter.  This results in having to have ( ) after the function variable obviously.  The question is, can a Function variable be assigned to a getter/setter function and retain its attribute of not needing brackets.  Everything I have read seems to imply it is not, but I am looking for a definitive answer.
    Below is some Pseudo code representing the question:
    public class Foo(){
         private var prop:Object;
         public function get Prop():Object{return prop;}
         public function set Prop(o:Object):void{prop=o;}
    //==================
    var GlobalFuncVar:Function = Foo.<get Prop>;
    *** - If Foo.Prop is used, it returns the value. how can the function pointer be accessed...

    The answer Should be no, but with a dynamic Object you can make this posible where a property call is actually a shortcut to a function.
    But this is a terrible practice because you will confuse anyone looking at the code when they feel its a property its actually a method being used.
    NOT AN ALTERNATIVE SOLUTION, SAME SOLUTION WITH GOOD ENCAPSULATION, DELEGATE to an object.
    use a get and set to set an object that has a common method to execute such as execute()
    then call your prop functionCall or whatever you choose.  myObject.functionCall= (ICanExecute type)
    now that its in myObject.functionCall.ecex()
    swap out your behavior that is required, but keep it clear to the user of your code.

  • How to use the set functions effectively in webi ,please let me know with detail

    how to use the set functions effectively in webi ,please let me know with detail

    Hi,
    we use use set functions on heirarchies with aggregate functions mostly .
    If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
    Member_set can include multiple sets separated by semicolons (;).
    The list of member sets must be enclosed in {}.
    If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
    Eg .
    1)     Ancestor
    =Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
    2)     IsLeaf
    =[Test Hierarchy].IsLeaf
    You can use this function when you want to show your Measure only at lower level .
    3)     .Depth
    =[Test Hierarchy].Depth
    This is also function used with hierarchy to find Level of Members .
    Follow this link for PDF reference .
    Page 147
    https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
    search on SCN this question was discussed before also one those links .
    http://scn.sap.com/thread/3183380
    Hope this will help you .

  • How to use union statement with declare & set function?

    Hi Experts,
            i  have small query about how to use union statement with declare & set function?
    Example as below :
    DECLARE @name AS date
    Declare @name2  AS date
    /* SELECT FROM [2013].[dbo].[OINV] T0 */
    /* WHERE */
    SET @name = /* T0.DocDate */ '[%1]'
    SET @name2 = /* T0.DocDate */ '[%2]'
    select  '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2013.dbo.orct t1
    inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2013.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
    Union
    /* SELECT FROM [2014].[dbo].[OINV] T0 */
    /* WHERE */
    SET @name = /* T0.DocDate */ '[%1]'
    SET @name2 = /* T0.DocDate */ '[%2]'
    select  '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2014.dbo.orct t1
    inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2014.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

    You have to create stored procedure in SQL only .
    Like u must have create for Crystal .
    You can execute procedure in query manager but you have to enter parameter manually..
    example
    Exec @Test '20140101' '20140501'
    Every time user has to enter it manually in yyyymmdd format in case of date parameters.
    Example
    Create Proc [@Test]
    as begin
    DECLARE @name AS date
    Declare @name2  AS date
    /* SELECT FROM [2013].[dbo].[OINV] T0 */
    /* WHERE */
    select  '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2013.dbo.orct t1
    inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2013.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
    Union
    /* SELECT FROM [2014].[dbo].[OINV] T0 */
    /* WHERE */
    select  '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2014.dbo.orct t1
    inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2014.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between
    between @Name and @Name2
    end

  • GET SET function in a dynamic Class?

    Is it possible to add a GET SET function in a dynamic class, like we can add properties to a dynamic class?

    correction :
    MyObjectProxy extends ObjectProxy{
         override callProperty(
              // your dyna logic
    and expose new MyObjectProxy(dynaInstance)

  • How do I check Business object set type for a particular field

    Hi,
    I have a requirement to make the  DESCRIPTION field editable  for Internal Goods and Service .I have done it for Limit shopping cart with following details in the below configuration
    Goto SPRO->SAP Supplier Relation ship Management
                             ->SRM Server
                                 ->Coss applications and settings -> Extensions and Field Control
                                          ->Configure field control->configure control for fields substructure (in tabs field)
    Bus. Object Set Type  32  
    Structure Field Name   DESCRIPTION
    Bus. Object Type        BUS2121
    Set Level                    ITEM    
    field editable               checked
    But for  Internal Goods and Service which Bus. Object Set Type should i use to achive this
    Thanks
    Vivek

    Hello Vivek,
    Execute transaction SM30 and display the Table/View /SAPSRM/V_ACTSET. Here you will find set type of all the fields.
    Regards,
    Arun Singh

  • COMMIT failed in RSORAADM, object JOB, function CREATE, return code 4

    Dear Gurus,
    When I am trying to schedule a backup through DB13, I am getting an error as
    "COMMIT failed in RSORAADM, object JOB, function CREATE, return code 4"
    Can any body tell me what is the error about and how to resolve it.
    Thanks
    Best Regards
    Dilip

    hi Kaushal,
    Thanks for your reply.  Yes I could solve the issue as my Operation mode was inactive, I made it active and then could schedule the DB13 jobs. 
    Can you tell me what is the relationship between DB13 jobs scheduling and Operation mode.  Also note when I am scheduling DB13 jobs that time none of the background job is running ie my background wp is free. It is only after I activated day/night operation mode, I could schedule the backup.
    Thanks once again.  Your input was of great help to me.
    Best Regards
    Dilip

  • Update Objective Setting & Appraisals(Received) tab in PA20

    Hi all,
    I am currently working on OSA appraisal. I managed to create appraisal. How can i update the Objective Setting & Appraisals(Received) and  Objective Setting & Appraisals(Created) tab in PA20, infotype 25 ?
    Appreciate your all help.
    Thank you.

    Hi Binu,
    I am not entirely clear about your requirement, but in OOHAP_VALUE_TYPE, for a specific proficiency value, if you have maintained a description for the value under 'Value description' then it will be displayed on the form within the 'Info' button.
    Regards,
    Priya.

Maybe you are looking for