Objects out of alignment when published

Hi,
I;m having issues with alignment and have searched the forum bt not yet found a resolution.
Despite setting alignment in the Design view, the live view places some objects out of alignment.
See Kingsdown Holiday Homes - Self Catering Chalet Rental at Kingsdown Park, Kent | Home
and the boxes as part of the left hand column are out. However in the Dutch version, they are not.
thanks,
Andrew

Hi Michael,
Thanks for taking the time to look and reply. I've checked and there are no overlapping or stray boxes, but its something I'll keep an eye out for. I grouped all the column items together, but this doesn't prevent it from happening.
So this in Muse:
is this live:
unless I do this in Muse:
which presents this live:
Thanks for taking a look,
Andrew

Similar Messages

  • CP4 - Audio out of sync when publish to AVI

    Hi Everyone,
    I'm having a problem when I create a presentation using most screen demonstrations where when I try to publish to AVI the audio moves out of whack.
    I am running a Vista PC with lots of RAM.
    When I publish to Flash it works fine... but we got this thing so that it would produce an AVI !
    Any ideas? I have played around with screen capture and encoding settings but to no avail.
    Any help much appreciated!

    Hello there,
    I am very sorry to hear that you have encountered problems when publishing to AVI. Since when you publish to SWF you do not experience the same problems, I would strongly recommnend that you report this issue to the Captivate team using the web address I have included below.
    Adobe Captivate Feature Request/Bug Report Form 
    I have seen some issues with the AVI converter and it would be useful if the CP team could inspect your source Captivate file.
    If you are working to a deadline then in the meantime you might want to download a trial version of SoThink's SWF To Video Converter. At least for this project you could then get the files converted to AVI whilst you wait to hear back from the CP team.
    SoThink SWF To Video Converter 
    Best - Mark
    Visit the macrofireball blog

  • Text shifting out of alignment when previewed in Muse or in web browser

    Hi,
    I am having issues with some title text not staying where I want it to. Here are some images: http://imgur.com/a/ZX6z9
    The first image shows how I have the page set up in the planner. The text in question is the title "Art Portfolio". If you look at the other two images, the second one being Muse's preview function and the third being in Safari, you will see that the title has shifted down a little in relation to the rest of the site. It is easily noticed because it throws the title out of alignment with the menu.
    Anyone have any idea how to resolve this issue? I can compensate by moving it a bit higher in the planner, but I would very much prefer that the software worked as intended rather than me having to intervene.
    Thanks for any help!
    Andrew Bennett

    Hi Thrfoot,
    I have a similar text issue with resizing occurring in preview and live mode. I believe text boxes (unlike web pages) are responsive to browser width. Just for grins, try keeping your Orbitron font and making the text box slightly wider and see if that helps. It may not, but I had to jiggle mine about quite a bit to keep it in line with everything else.
    Cheers,
    Kellie

  • Photos randomly out of order when published to my gallery!

    Photos are in the right order in iPhoto on my mac (Library, Albums, Web), but when the album is published to my gallery the photos are completely and randomly out of order.
    The name of each photo is just the number given by the camera, and iPhoto had correctly imported the folder of photos in chronological order from a hard disk.
    Also, there are videos which sometimes work in the gallery, but for some it says quicktime cannot play the video, and sometimes the video is UPSIDE DOWN!
    How can I get the correct order (and functioning videos)?
    Thanks

    In the gallery on the web, I see no pattern to the random order.
    Aha! In iPhoto (back on my mac), I now see that the order from the import at the beginning ("events") is not the same as the original folder (where all files were in order of file number). I see the problem there - iPhoto imports the photos in the correct order until it encounters a video. The videos (.mov) are mostly in the wrong place, although I found one in the right place (just to make it impossible to say always, grr).
    Then when the mostly in order (apart from videos out of order) "album" is published to the web gallery, photos and videos are completely out of order.
    I had never tried including videos in photo albums in iPhoto, I think because in previous versions this was impossible. So I had published one video at a time to its own "album" on the gallery. Maybe iPhoto is mixed up by these videos in with photos. Strange though, because it gives details about how many photos and how many videos in the album, and seems to act like this would be possible.
    So, resetting the order in iPhoto does not allow me to republish maintaining this order. In the publishing process, somehow all are randomly mixed up. The only way I can see to reorder everything in the gallery is to move them all manually there in the gallery when connected to my account at me.com
    I had hoped to find a better solution, because this would take a long time to do.
    Message was edited by: chasmania

  • Rectangle tools not aligning when publishing

    Left image is how i want it to look like, when i publish it looks like image on right!!!
    I HAVE NO IDEA WHY THIS IS HAPPENING! SO ANNOYING NEED HELP BIG TIME!!!!
    cheers guys!

    Hi Kezmania,
    I see that you have embedded some HTML code on this page. Please try to duplicate the page without the embedded HTML and see if that helps. Also, try to group the three rectangle using the Menu option, Object -> Group.
    If you still face the issue then send your .muse file and a link to this forum topic to my attention to [email protected] If your .muse file is larger than 20MB use a filesharing service like SendThisFile or Adobe SendNow.
    Regards,
    Abhishek Maurya

  • Object not showing up when published

    Hi,
    I have finally managed to get a Facebook "Like" button onto my website but the problem I have now is that the text for the button merges into my background fill which is grey. I have tried creating a bar of colour to fit behind the HTML snippet and it looks great in iWeb edit mode but when I publish it, the block of colour doesn't appear. Can anyone tell me how I can get this to show up or change just a section of my page background or if it's possible to change the colour of the text in a FB Like button. Thank you!

    Thanks Roddy, I've tried that and it does improve things a bit. This is what I get with the "dark" option selected which is acceptable to a degree but.....
    .....this is what I'm really trying to achieve, which shows up as shown here, when working in iWeb editing but does not show the colour-filled shape when I publish it.

  • Main menu out of alignment, when first opened in dvd player

    I have a strange problem.....
    I have authored a very simple 1menu 1 track 4x3 dvd, something I have done a thousand times..
    I have created a .img file.
    When I open that file and open the DVD files in dvd player to test it, the menu come on all out of wack and the overlay is not over the button.
    It kind of looks like a 4:3 image that is stretched vertically (like anamorphic 16x9) but not centred, the bottom of the frame is cut off...
    BUT
    as soon as I got up to the DVD Player menu to "open DVD media" it immediately corrects itself. and all is ok.
    any ideas where this glitch is coming from?
    I am running
    Macbook pro 10.4.11
    DVD studio Pro 4.1.2
    Thanks!

    I have seen this in the past when the dimensions of the overlay don't match the frame size. It has been a few versions since pixel aspect ratios have been an issue, such as on 16:9 Pan&Scan menus. However, I bet if you go to your photoshop file, you may find that there is some layer in there that has some leftover pixels outisde the canvas. A quick select all-crop will do the trick there. By opening your build or the image in DVD Player you should be seeing pretty much what any othe player would show (avoiding any Simulator-specific anomalies) so I would definitely try to track this one down.
    Hope this helps -
    Max Average

  • HP C4680 all in one printer out of alignement when printing avery business cards.

    I recently purchased an HP C4680 all in one printer and have found
    that it will not print Avery clean edge C32028-25 business cards. It
    prints ok on plain paper and when you compare against the business card
    sheet everything is in the correct position. However when you print the
    actual cards the printed area creeps up the page and some of the print
    is off the cards ruining the sheet. I am using avery design pro
    software version 5. The print preview shows the printing area correctly.
    Please advise of a fix for this issue.

    I have the same problem with my HP Officejet Pro 8000 using Avery business cards.  I don't think HP knows how to fix the problem.  I was told by HP to select card stock as my paper type, but that is not on my menu.  I may have to adjust my PageMaker template to counter the creep.  You would think that this would be an adustment that could be made in the software. It amounts to 1/8" over the whole page.  I don't plan on much help from HP since I have not received any help in the past.

  • FrameMaker 11 file link broken when published out to RoboHelp 10

    Hello
    I have the Adobe Technical Communication Suite 4 and am trying to test publish a FrameMaker 11 file out through
    the FrameMaker publish button to WebHelp (by way of RoboHelp 10).
    In the FrameMaker 11, file, I have a link to a PDF that sits down in a subfolder.  I have used the following approach:
    1. Highlighted text in a FrameMaker table.
    2. Chose Special>Hyptertext
    3. From the Hypertext panel, I selected Message Client from the Command drop down menu
         and in the syntax field I entered:  message openfile Foldouts/Foldout1.pdf
    4. I then tested the link in FrameMaker by using ALT and CTRL and it works.
    5. Next, I saved the FrameMaker file as a PDF (File>Save As PDF) and tested the PDF.  The PDF links work.
    So with all that said, how come I can't select File>Publish>WebHelp and have the link information carry through to the WebHelp HTM output?
    I tried this Publish option straight out of the box and it did not work.  I also tried creating a custom RoboHelp template (.XPJ file) and it did not work.
    I believe there is a PgfId marker that is generated when the Hyptertext is created in FrameMaker (using the process stated above), but that marker is not getting
    translated into an HREF, once it gets published out through RoboHelp 10.
    I also tried saving the FrameMaker 11 file directly as an HTML file using the FrameMaker 11 - File>Save As HTML process, but no links carried through
    using that process either.
    I do not know if this is a FrameMaker issue or a RoboHelp issue, so I am now posting this in both forums.
    If someone could point me in the right direction, I would really appreciate it.
    Are there certain steps one must do to preserve FrameMaker Hypertext links that get published out through RoboHelp 10 to WebHelp?
    Thanks in advance for your suggestions.
    Jim

    I've deleted the other post as the question is being addressed here. Folks who use Fm only would not be able to help so this is the correct forum as Jeff as explained.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Objects required when publishing inbound interface

    Hi
    We are publishing an inbound interface in SAP PI SR, and implementing proxy in ECC.
    What all objects do we need to create in PI.
    In ESR we will just need one inbound service interface, with request/response messages.
    - Do we need to have any other objects in ESR??
    - Do we need to create any objects in Integration Directory??
    One more thing, when publishing Outbound interface from Sender agreement, we will configure the end points, is it possible to configure endpoints when publishing inbound interface?

    Dear Osman,
    Concerning the issue, kindly go through the following link :
      - http://help.sap.com/saphelp_nwpi71/helpdata/EN/02/265c3cf311070ae10000000a114084/content.htm
    which might help you.
    Best Regards
    Nishwanth

  • Why do my fonts turn out different when published?

    On one of my pages I have the font handwriting dakota and when I view it on the internet it is arial. What do I do?

    Hi David - when publishing a website on the internet you need to use 'standard' web fonts.
    This is because the fonts are not 'embedded' in your webpages - the people viewing your website need to have the same font(s) installed on their computer as the ones you have used in your website for it to appear the same. If you use a non-standard font (such as Dakota) they will more than likely not have it installed on their machine and will see a substitute font instead (e.g. Arial, or Times).
    'Standard' fonts are those common fonts which come installed as part of the operating system, be it Mac OS or Windows, and the list is fairly limited. Here's a link to a handy page listing them.
    If using a non-standard font is crucial to the design of your website, then you need firstly to save the text in your particular font as an image file e.g .gif or .jpg, and then insert that image into the layout of your page as necessary - this way anybody's web browser around the world is simply displaying an image file and it doesn't matter at all whether they have the font installed on their machine or not.
    Hope this helps?

  • Background audio not adjusting after project is paused when published to Flash. Any suggestions?

    Hello,
    I'm working with:
    Captivate 6
    Mac OS X 10.8.2
    Flash Player is updated to most recent version
    My project contains background audio music set to adjust to slide audio. When I publish to Flash the background audio adjusts appropriately until I pause the video and then resume. Once the video resumes the background audio no longer adjusts to slide audio. So basically anytime a learner pauses the video and then resumes the background audio drowns the slide audio out. I've tried this with multiple projects and get the same result.
    When I publish in HTML5 it works fine. But I cannot use HTML5 because my project contains necessary rollover objects and captions, slide transitions, text animations, and other effects that HTML5 does not support.
    I've to remove and re-add the background audio, uninstall and reinstall Captivate, adjust the background and slide volume levels, uncheck loop audio, and pretty much any audio settings and publish settings I can think of.
    Can someone else with the same OS and Captivate version try and see if they encounter the same problem when publishing to Flash?
    Or does anyone have a solution/workaround?
    Thank You!

    Hi folks
    Sorry, I don't have a fix to offer. Only an observation. I'm rather surprised to see this many folks actually USING background audio. I say that, because I have facilitated hundreds of Captivate classes over the years. And there are lots of folks with Instructional Design background that attend. And in so many of the classes, when we reach the audio section and we cover how to use Background Audio, the same comment is made.
    The comment is that generally speaking, it is their opinion that from an Instructional Design standpoint, background music is a "no no" and should be avoided because it detracts from the learning objective.
    Perhaps the link below will help.
    Click here
    Cheers... Rick

  • Object drawing poorly aligned bounding box problem

    Whenever I draw a shape with Object Drawing turned on the blue bounding box that appears whenever it is selected isn't aligned properly to the outer edgers of the shape.  Like this:
    Admittedly it isn't a major problem it's just a bit irritating especially when people I'm teaching to use Flash ask me why it looks the way it does.
    Does anyone else have this problem?
    Does anyone know if it can be fixed?

    Hi Jen,
    I'm most grateful for your response!
    I am running Flash CS4 10.0.2 on a 2.4GB Mac OS X 10.5, MacBook Pro with 4GB RAM.
    Following your reply, I tried a new AS2 file - and there is absolutely no issue! Its fine. How odd!
    However, the problem occurs in all AS3 files - if I create a new Flash AS 3.0 file and draw on the stage, the problem occurs for the following shapes:
    1. Rectangle tool
    2. Ellipse tool
    3. Polygon Tool
    Rectangle primitive and Ellipse primitive are fine.
    The smaller the object is, the more the bounding box is out of alignment. I have attached a further screengrab to show how bad things get when zoomed in working on small shapes (zoomed to 800%). Its completely unusable in object mode. The fact that the primitive shapes work is good, but the ellipses can be a bit unreliable in their shape. I've been trying to skin some detailed Flex components, but just can't work like this, so its been very frustrating.
    I have really no idea where to start. I tried to re-install from the CS4 Web Premium DVDs, but as luck would have it, my SuperDrive has packed up and I have to wait for a week at the Apple Store before dropping it in to get fixed, so can't do that for now.
    Cheers,
    raff

  • Dashboard when published to BW, date functions always show published date

    Xcelsius dashboard when published to BW at a particular date, the date functions(like Today(), now()) used at spreadsheet generates published date irrespective of time or date the dashboard is previewed....Could anyone help me out what actually .XLF gets stored in BW....does these functions stores a static value when published?

    Hi Rajesh,
    To confirm, you're saying that you're saving a swf (falsh file) to BW and when it's opened by a user in a browser, it doesn't show the most recent date?
    In the current version, the Now() function will be calculated at the time the dashboard is opened. Each time you open the swf file you will see the current day/time.
    You mention the xlf file. The date stored in this has nothing to do with what is viewed in the swf file (if you're in BI4.0 then the xlf and swf are stored in the same object on the server).

  • Report works fine in VS2010 but simply doesn't show when published

    Problem:
    Crystal Report works fine in VS 2010 but doesn't show when published to web-server, there is no error, it simply doesn't show.
    Background:
    Installed VS2010 on a freshly installed and fully updated (.net 4.0 is included in the updates) windows server 2003 box with production release Crystal Report 2010. Nothing else is on the server.  IIS 6 is running.  My web-server and VS2010 is on the same box.
    I went ahead and created a new asp.net 4.0 web project called webapplication1. Thereafter, i put a few controls (text-boxes, list-boxes and so on)  on the default.aspx page. Then i created a report.aspx page. This page will have the crystal report viewer on it. I went ahead and set the report up without much hassle (got how-to's from the internet).  I successfully tested my web app with the built-in testing server, the beautiful crystal report presented exactly what i asked it to. There was one recurring "Sys.Application is null or not an object" hiccup that occured every time during testing when i navigated from the default.aspx page to the report.aspx page (the page the report is on). Clicking ignore or continue  on the dialogue box that comes up because of the hiccup will allow testing to continue.  Here's a screen-shot of this recurring hiccup.
    http://i440.photobucket.com/albums/qq122/ricom_19/Testing-Error.jpg
    As i've shown, testing went great, except for the hiccup. I now moved to setup a publish profile. Since my web-server and VS2010 is on the same box this seemed relatively straight forward. All the files went over except the report, i.e. crystalreport1.rpt  file. I solved this by  setting the build action to 'Content' in the CrystalReport1.rpt properties. I did a republish. Now i have all my files, see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Application-Home-Directory.jpg], on the web-server.
    I proceeded to try to browse to my app from another computer on my network. This was successful until i tried to navigate to the report.aspx page that the crystal report is on. The the report.aspx page loaded but the crystal report was simply not on it. No errors, not even the hiccup from testing occured. Its as if the crystal report viewer was never on the page to begin with. Only when i right clicked on the page and 'view source'  did i see some remnants of the crystal report viewer.
    Here is the Report.aspx page when tested in VS2010:
    [http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg]
    Here is the Report.aspx page when published to the web-server and browsed to from another computer on the network:
    [http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg]
    Details of adding report to my web app:
    1) Populate my dataset then write the XML schema, reportschema.xml
    2) Added the crystal Report to the project then used the wizard to navigate to the reportschema.xml. Of course i had to create new connection in Database expert. see screen-shot:
    [http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg]
    3) I formatted the report the way i wanted it
    4) Added the Crystal report viewer on the Report.aspx page
    5) In the code-behind of the Report.aspx page i bound the viewer to a report document that is loaded with CrystalReport1.rpt file
    see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Report-Page-Code-behind.jpg]
    That's it.  As mentioned, it tested fine in VS2010 but the viewer doesn't show when i publish to the webserver. I wrote a crystal report in .net about 8 years ago. Things have changed soooo much since then.
    I am wondering if its a license issue? Was also wondering if it had anything to do the testing hiccup, even though research is suggestion the two are unrelated.
    I've described my actions as best as i could (without getting into ridiculous detail) and have included screen-shots of relevant stages of the process. Have a look and tell me your thoughts. Thanks.

    The "Sys.Application is null or not an object" issue is known, submitted for a resolution and documented in KB #1528503. Unfortunately the KB search has been down the last couple of days...
    However, the issue is limited to compile time and does not affect a completed application.
    Re. the viewer missing. Sounds like the viewer directory did not get created or configure correctly. Before I get to that. You mention:
    "I proceeded to try to browse to my app from another computer on my network."
    This bring up the question: If you run the app right on the app server. e.g.; not a client computer, does the viewer and report come up? Is this issue isolated to client computers on the network?
    I suspect that the issue exists irrespective of which computer you try to see the report from - but that is an assumption. If the assumption is correct, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article on configuring the viewer. The article does not have CR4VS2010 documented, but you should be able to guide your self using the article. I think the pattern will be obvious.
    Ludek

Maybe you are looking for