Obtaining previous (1.5) demo

I had 1.5.6 installed and now upgraded to 2.0. That's all fine.
But - my plans for this year include an upgrade to either a mac pro or imac. And I'll want to move aperture from the laptop to that.
Now - the upgrade needs 1.x installed. I have the license code for my 1.5 copy, I can even use it to download all the upgrades from the aperture downloads page. But all of them need the original installed.
I made the mistake when I ordered 1.5 just to update the demo (2.0 I have the retail box) - so I don't have the original 1.5 install media
All I need to find is the old 1.5 demo - is it still available? Having spent $299 on 1.5 and a further $99 on 2.0 its going to hurt to have to go another $199 just to get it on to the new machine

Now isn't that a good suggestion
I'd just assumed (since the doc says requires 1.x on the machine) that it wouldn't work and so I'd grabbed the 1.5.6 update from the download site which did in fact refuse to install (difference between an update and an upgrade I assume).
One gotcha - you MUST do this as an Administrator.
Normally I run as a non-admin. And the installer asks for access. But - this happens AFTER it tries to write the old license key (when it prompts for the previous key). It will complete the install but in an unlicensed state.
Same when you start the app - it asks for the details and then complains it can't write them.
Simply do the install as an admin, or - run the app at least once as admin after install and enter the keys and this is solved.
Many thanks for giving me the hint to just try

Similar Messages

  • Any way of legally obtaining previous versions of iOS?

    I read other posts concerning reverting the software on iPhones and iPod touches, (some very lengthy), but all answers were most times simply "No." I have a 5th gen. iPod touch which I recently updated to iOS 7. I enjoyed the new look of iOS 7 for the first few days, but I am now bored by the UI. I miss the nostaligic look of iOS 6 and previous generations, and would also like to revert my software back to a previous version. I do not see any need, and do not plan on, having my iPod connected to the internet, so I see no risk in running a previous generation of software. I am wondering if there is any legitimate way of obtaining a previous version of iOS.
    If the case is no, I am complaining to any Apple employees who on the off chance may be reading this post (Don't know why they would be in the community forum) I believe for developer and other purposes, previous versions of iOS should be at the disposal of all with Apple products that have or are capable of running them.

    There is no Apple supported means and you will void your warranty if you use other means.
    There are no Apple employees reading here.

  • FM to obtain previous date

    Hi ,
    is there any function module to obtian previous date.
    if input is 21012008 then previous date is 20012008 and
    if input is 01012008 then previous date is 31122207.

    Hello Anand,
    You can do it by the function moduel RP_CALC_DATE_IN_INTERVAL .
    Here you have to give the sign '-' for signum as you need previous date.
    you can get the date as you like... 1 day after, 1 day before, 10 days before, 10 days later ,1 year 3 months 15 days before like that...
    REPORT zsample.
    DATA: date1 LIKE sy-datum,
          prev_date LIKE sy-datum.
    PARAMETER: p_date LIKE date1.
    CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
         EXPORTING
              date      = p_date
              days      = '01'
              months    = '00'
              signum    = '-'
              years     = '00'
         IMPORTING
              calc_date = prev_date.
    WRITE: / prev_date.
    INPUT
    01.01.2008
    OUTPUT
    31.12.2007
    Reward If Helpful.
    Regards
    Sasidhar Reddy Matli.

  • Obtaining previously read emails on iPad/iPhone on my Mac

    Hi,
    Quick question that I am sure some setting or preference will clear up. When I read an email that is newly received on my iPad or iPhone while I am work, I would like to be able to read it on my Mac as well. However, if I have already read that piece of mail, once I get home and open Mail on my Mac, that mail won't be downloaded to the Mac...in fact, it acts as if it isn't there at all, even though the already read message is visible within the browser-based iCloud application. I have run into this before with other mail services where there is some option to not download already read messages or some such. Anyone have any ideas how to remedy this?
    -John

    http://support.apple.com/kb/TS3899?viewlocale=en_US

  • Creating View based on Current and previous data from same table

    I am trying to create a view based on a table called “my_companies”. The table has following columns: “company_id”, “start_date”, “product_type_code”, “partner_id”
    The main purpose of this view is to obtain previous company_id’s associated with a particular “partner_id“and “product_type_code”. So basically, I’m looking to create an extra column, say “prev_company_id” in the view along with all the other columns. The “previous” data can be obtained depending on the “start_date”. I’m not able to write a query successfully to do this.
    Can anyone help? Thanks in advance.

    Hi,
    Whenver you have a question, it helps to post:
    (1) The version of Oracle (and any other relevant software) you're using
    (2) A little sample data (just enough to show what the problem is) from all the relevant tables
    (3) The results you want from that data
    (4) Your best attempt so far
    Executable SQL statements (like "CREATE TABLE AS ..." or "INSERT ..." statements) are best for (2).
    Formatted tabular output is okay for (3). Type before and after the tabular text, to preserve spacing.  The sample results should include any special cases that you foresee, such as one company having many previous companies, or vice-versa.
    It sounds like might need a +self-join+, where you have two copies of the same table, as if the current companies were in one table and the previous companies were in another, even though they are all actually in the same table.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How does the EDB handle deleted items and why am I only able to recover some and not all previously deleted emails?

    Hello,
    I have been unable to locate information regarding how the EDB handles deleted files.  I am able to recover deleted emails from the EDB; however, there are numerous emails that I know have been deleted, that were not recovered during the recovery process.
     Is this because the EDB dumps deleted emails once it reaches a certain amount of entries?  Or is it more likely the deleted items are corrupted and thus not recoverable?  Thank you for your time and I look forward to your responses.  The
    product in question is Microsoft Exchange Server 2007.

    Great information from the other posters and one other possible explanation is if the users did a HARD DELETE.  More information on this below
    Pre-Exchange 2010 Dumpster 1.0 worked as follows;
    1. When a user does a normal delete of an item via Outlook or OWA it gets sent to your deleted items folder
    2. If the user then empties deleted items folder those items are then marked with the ptagDeletedOnFlag attribute which in essence hides them from the view of the user
    3. At this point the user can use the Recover Deleted Items function in Outlook to recover those items as long as the items were NOT purged using the Recover Deleted Items option OR the items have not passed still the deleted item retention period.
    NOTE: Every day there is a nightly maintenance process that in short looks through  the DB and examines items that have been deleted. Items that have met or exceeded the deleted item retention period are purged from the system and are
    completely non-recoverable.  More about this at the end of my post.
    4. However if the end user were to  delete an item from the Inbox or another folder in Outlook by using Shift + Delete aka a Hard Deletion the item is left in its orignal location and gets marked with the ptagDeletedOnFlag attribute which again just
    hides it from view.
    5. By default you can only use the Recover Deleted Items option on the Delted Items folder.  Howeve you can make it so that you can recover hard Deleted items from other folders.  More on that here http://support.microsoft.com/kb/246153
    5. The problem with this method though IMO is that you have to know where to look and that can be rather time consuming.
    6. If you want a more elegant method to resolve this and are open to using 3rd party utilities check out Lucid8's DigiScope. 
    http://www.lucid8.com/product/digiscope.asp which will allow you to open any offline copy of the DB from a forensic point of view and to solve your specific issue you can either turn on a filter to ONLY
    show hard deleted items OR you can search the entire store and all mailboxes for just deleted items and can then view or export them to PST or MSG format.  You can download the product and obtain a 30 day demo license which will allow you to find any
    hard deleted items, however to view them or export your would need to purchase a license.
    NOTE: When a database is backed up or copied it is an "Offline" database and then its offline the data retention period is not an issue because the nightly online maintenance process can only act on a database that is mounted on an
    Exchange server.  So for this reason if you want to recover the most data possible use offline copies/backups of the DB with a 3rd party utility like DigiScope
    NOTE 2: Exchange 2010 and 2013 use Dumpster 2.0 which is an entirely different beast and I will not go into that in this post since its nearly 1AM  however DigiScope can expose that information as well
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
    --> 2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Netflow Collector 6.0 demo license

    Hi,
    It is said in the NetFlow Collector Installation and Configuration Guide that a limited-time demo license can be obtained from Cisco.com
    How can i get this demo license?
    Regards,
    Velin

    Hi,
    I think you can obtain that (and more) demo licenses here:
    https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?DemoKeys=Y.
    Good luck!
    curtis

  • NetFlow Collector demo

    Hi,
    I installed netflow collector demo version 5.0 in a solaris server.
    How can i log into web page because it's don't ask me for user and password.
    Greats.

    Hi,
    I think you can obtain that (and more) demo licenses here:
    https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?DemoKeys=Y.
    Good luck!
    curtis

  • Ncs 1.1 demo licence renewal problem

    Hi we managed to obtain from cisco a demo license extension for testing purposes on our business environment cause the old one will expire in 2 days
    but... when I try to add the new licence file the system says :
    Unable to add an Evaluation license to an already licensed system.
    strange thing was that the licence was originally not accepted cause "the file does not to seem a licence file" so I opened it with wordpad to verify it was congruent with the old one and resaved the file... this way it was accepted and resulted in the alert mentioned above...
    what do I need to install the new licence? delete the old one and install new one?
    and if something goes wrong with the new licence?
    thank you

    Remove the old one. That should work if your new license is ok.
    If the new still not working contact cisco TAC.
    Sent from Cisco Technical Support iPad App

  • Help?!  "Error Code -1 was returned by the CoreAudio driver" issue!

    Hello all,
    I am having a problem with Logic Express. Certain song files (not all) will not open. I get the "Error Code -1 was returned by the CoreAudio driver" dialog box, then Logic Express crashes.
    I don't want to lose any of these songs.
    Here is the pertinent info for diagnostics:
    System:
    MacBook Pro 2.0ghz Core Duo
    2 GB RAM
    10.4.11
    Logic Express (Academic) 7.2.3
    Line 6 Toneport UX2 as soundcard (just loaded most recent driver)
    3rd Party Plug-ins:
    PSP Vintage Warmer 2 & 3
    NI Guitar Rig 2 & 3
    (both worked fine previously)
    Additional information:
    About a year ago I obtained a six month demo of Logic Pro (with an XKey dongle). The time has expired but I haven't gone through my system to delete everything from the Logic Pro install (and didn't want to accidentally toss out something Logic Express might need).
    I ran searches here on this forum and Google and did not find any workable solutions.
    HELP?!

    Strange. I just went into the Library/Audio/Plug-ins/Components folder and thew out the older versions of VW and GR (as listed above) plus an old demo of Amplitude that I never ended up using. Now the files seem to be opening up. Does anyone have an explanation so I might understand just what happened?

  • Serial number does not work

    i purchased CS2 online from amazon ... the serial number did not work... I then went to live chat and they guided me to a new number..
    it does not work either...  what can i do?????

    Is it possible you had a previous install or demo on your disk?
    In that case, try deleting these files:
    /Library/Receipts/Shake4.1.pkg
    /Library/Application Support/ProApps/Shake System ID
    Then repair disk permissions using this:
    /Applications/Utilities/Disk Utility
    and try again.

  • Transcoding from AVCHD to ProRes

    Hello and Happy New Year to all.
    I have a question to ask yourself.
    I have edited a project in AVCHD.
    When importing the clips I've checked the option to transcode to ProRes, not because I wanted to work in their native format.
    Well, the clips were imported to H264 and not to Apple ProRes.
    I did all the tests without any success.
    Transcoding after the acquisition only if the operation is successful.
    Does anyone know give me useful information?
    Thanks in advance.

    The dvd obtained previously in ProRes editing, encoding with Compressor and burning with DVD Studio Pro, in my opinion were the best.
    Today I notice a loss of quality that I do not know whether it is naive to be connected to the editing of files in format AVCHD although it should not be so.
    Thank you.
    Greetings.

  • "This application cannot be installed on this computer"

    For the above mentioned error message (appears right after I click 'buy', or 'free', for only some apps), I've already tried the proposed solutions of a re-install of the combo update 10.6.6, and the repair permissions of my hard drive. But neither helped. This matters brand new apps (no previous beta or demos installed). Any suggestions why they don't get installed? Is there anywhere a log that might help finding the problem source?

    Folks, I got feedback from the developer (who got Apple feedback), saying that his software was set for only 64 bit Intels (mine is a 32 bit, yep first one He will now improve this with an update, as there is no restriction. So if you ever run into this error message, you might try to address the developers and find out if your old Intel should really be excluded.

  • Batch management change for material

    Hi gurus,
    can anybody please help me with this. We have some stock for a material in vendor consignment status. We want to change this material to batch management. How can we do this?
    Thanks
    Anusha

    you have to issue the stock in previous period and current period.
    obtain previous period stock in MM03 > plant stock view
    you can use movement type 201 to do this.
    then you can try to change the Batch managment indicator.
    if you still get an error, then you may have to archvie the special stock records first.
    this can be done with transaction SARA - object MM_SPSTOCK.
    The easier and quicker solution is to create a new material master.

  • Getting shipment number from handling units

    Hi Abapers,
    is there any bapi avaible to get the shipment number by passing handling unit identification number.
    Thanks & Regards,
    Swapna .

    Hi all,
    I found the solution to fetch shipment number based on handling unit.
    In table level, Go to SE11 transaction.
    Enter table name : VEKP.
    Pass VENUM(handling unit number).
    VPOBJ = 04
    and Execute.
    See the field value VPOBJKEY.
    This value is shipment number.
    If u got to table VTTK and pass this shipment number obtained previously. it will have entry with this shipment number.
    Thanks,
    Swapna p

Maybe you are looking for