ODI Hyperion Planning Integration

I have one question on ODI. If my application has 3 database and all of them have different accounts and entity dimension. How will i tell the ODI to update a particular database dimension and not all. Example below
If I have application called : Sample
3 database : Plan1, Plan2, Plan3
All these have accounts and entity dimension but all of them have different accounts and entities. How will i tell the ODI to update which accounts dimension?

You use the target columns - Plan Type (Plan1), Plan Type (Plan2),Plan Type (Plan3)
A True or 1 means to use that plan type, False or 0 means not to use that plan type.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Agents for Hyperion Planning Integration

Hi all,
my customer is performing an integration between E-Biz and Hyperion Planning
* From E-Biz to Hyp Planning (using Planning KMs for dimensions and Essbase KMs for data)
* From Hyp PLanning to E-Biz (using Essbase KMs for data extract and Oracle KMs for loading into GL Interface Table)
Server's architecture is as follows:
* Planning Server
* Essbase Server
* E-Biz Server
We will place an ODI agent at Essbase Server (data extract requirement). This agent will be also used for data load into Essbase.
would it be recommended to have another agent at Planning server for running dimensions load into the Planning application?
Thanks in advance

I don't usually install an agent on the essbase and planning server, usually the agent is on the essbase server. I have not really seen any performance issues for loading metadata into planning, planning metadata is relatively small anyway.
Cheers
John
http://john-goodwin.blogspot.com/

ODI - Hyperion Planning - Plan Type Option Missing

Hi All,
Iam not able to see the Plan Type option in the Hyperion Planning Application. For the application we have in planning has 5 plan types. A custom dimension is enabled for 3 plan types. When I reverse engineer the application under that dimension I should view Plan Type and Aggregation of that plan type. Currently Iam able to see only aggregation option of the 3 plan types but not plan type option.
This plan type option would decide in which plan types members are to be created. "True" would create that member in that plan type. "False" would not create that member in that plan type.
Any ideas ....
Thanks,
Ramesh

Hi Willasi,
Thanks for the update. I clearly understand the point you are trying to convey. Here is my scenario is that "Entity" is a standard dimension and "Department" is my custom dimension.
As per your point
"Entity" is enabled in "PnL","Capital","Workforce","Balance","Revenue" and when i add a entity i have a option to select in which database this entity should exist.
"Department" is enabled in "PnL", "Workforce", "Revenue" and in this case when i add a department should that department should exist in 3 plan types is that mandatory.
Is that any alternate option to enable that department can exist in one plan type ?
As per my requirement some department should exist in one plan type not in other plan type
Thanks,
Ramesh.

ODI Hyperion Planning Reverse Transaction The Screen freeze and Hang

Hi,
There is a problem with reverse transaction via RKM Hyperion Planning KM.
In desinger application I will click reverse button, the application is hang up and the screen is freezed.
I completed the setup steps.
How can be solved the problem?
thanks.

Sql server is pretty much the same set up as SQL server, you could have a read here
Cheers
John
http://john-goodwin.blogspot.com/

ODI - Hyperion Planning/Essbase Knowlege Modules

Hi All,
I have installed and configured the ODI 11g Iam working with Hyperion EPM 11.1.2 series does any one let me know do we need the knowledge modules to be imported.Why do we need this knowledge modules for ODI as Iam new to this product I want to know more about this modules.
Thanks,
KRK
Edited by: KRK on Nov 1, 2010 10:58 PM

John,
Thanks for your reply I got it.
One quick question I have from ODI Series 4 from your blog
I have created a new model for Files to be loaded. Then I have created new data store in that data model. I have exactly mapped the information as you mentioned in your blog In the column section when I click on reverse engineering I get the following error
The directory E:\Hypdata\ODITest.csv specified in your schema does not exist
But I have my file in that location.
Can you tell me where Iam doing wrong.
Thanks,
KRK

Malformed INSERT statement - Sample Hyperion Planning with ODI

Hello,
I've tried to execute the sample Hyperion Planning pack with ODI, but it was found the following error below, I am beginner and I don't have faintest idea what it is.
My source is a CSV file and my target is Hyperion Planning.
7000 : null : java.sql.SQLException: Malformed INSERT statement.
java.sql.SQLException: Malformed INSERT statement.
     at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
     at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
     at com.sunopsis.jdbc.driver.file.w.a(w.java)
     at com.sunopsis.jdbc.driver.file.w.<init>(w.java)
     at com.sunopsis.jdbc.driver.file.u.prepareStatement(u.java)
     at com.sunopsis.sql.SnpsQuery.a(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.a(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrdersScriptingOder(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Hello Mateus,
My source is CSV file and my target is Hyperion Planning.
I defined only one RKM for Hyperion Planning. There is a IKM SQL to Hyperion Planning. There are two technologies defined: one for Generic File and another to Hyperion Planning. These steps are defined on the sample manual of ODI - Hyperion Planning.
I created the interface without any warning or errors. But when I tried execute this rule, I have the following error return on the Operator module:
7000 : null : java.sql.SQLException: Malformed INSERT statement.
java.sql.SQLException: Malformed INSERT statement.
at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
at com.sunopsis.jdbc.driver.file.w.a(w.java)
at com.sunopsis.jdbc.driver.file.w.<init>(w.java)
at com.sunopsis.jdbc.driver.file.u.prepareStatement(u.java)
at com.sunopsis.sql.SnpsQuery.a(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.a(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrdersScriptingOder(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Thanks a lot for your help and attention,
Wallace Galvao

ODI Integration - Hyperion Planning inbound to GL

ODImates,
I am designing a full integration (2 way-sided) from EBS-GL to Hyperion Planning and Hyperion Planning back to EBS-GL.
The first side is almost finished, I extract the information from GL and create the specific format used by OTL Loader to update both metadata and data.
But my problem is when I want to reverse Planning application data and return it to update GL... I had no information of how ODI can do such thing. Or maybe anyone can give me some idea of how create Open interfaces to accomplish that task in an automated way.
Hope to know about you soon

You will need to extract the data from essbase and load into a staging area where it can be transformed for going back into EBS.
I wrote an article on extracting essbase data with ODI in the past - http://john-goodwin.blogspot.com/2008/12/odi-series-extracting-data-from-essbase.html
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion Planning and eBusiness Suite ODI integration

Hi,
I have to integrate eBusiness Suite and Hyperion Planning, mostly exporting data from eBusiness Suite to load into Hyperion Planning. I'm allready using eBusiness Suite connectors.
I'd like to know if there is some start point to understand eBS model besides http://etrm.oracle.com. I found that the technical reference is not of much help to understand where I can find the proper info that I need or what kind of info provides each column/table.
Thanks!

Hi Pratik, thank you for your comment. Both links are very helpful. Although I think I wasn't precise enough on my initial post. Im trying to extract info from several modules of eBS (GL, PA, PO, INV, AP and others) to a single table and my approach for the extract is using one source set for each eBS module on ODI interface (with the corresponding tables from each module on each source set).
The main info I need on this approach is how to avoid exporting duplicate info, because I know that some info is present on several modules.
I hope I was clear on my explanation, do you have any advice on where can I get that info?. Thank you

Unable to load data to Hyperion planning application using odi

Hi All,
When I try to load data into planning using odi, the odi process completes successfully with the following status in the operator ReportStatistics as shown below but the data doesn't seem to appear in the planning data form or essbase
can anyone please help
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 2, in <module>
Planning Writer Load Summary:
     Number of rows successfully processed: 20
     Number of rows rejected: 0
source is oracle database
target account dimension
LKM SQL TO SQL
IKM SQL TO HYPERION PLANNING is used
In Target the following columns were mapped
Account(load dimension)
Data load cube name
driverdimensionmetadata
Point of view
LOG FILE
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Oracle Data Integrator Adapter for Hyperion Planning
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Connecting to planning application [OPAPP] on [mcg-b055]:[11333] using username [admin].
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: Successfully connected to the planning application.
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: The load options for the planning load are
     Dimension Name: Account Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : false
2012-08-27 09:46:43,339 INFO [SimpleAsyncTaskExecutor-3]: Begining the load process.
2012-08-27 09:46:43,355 DEBUG [SimpleAsyncTaskExecutor-3]: Number of columns in the source result set does not match the number of planning target columns.
2012-08-27 09:46:43,371 INFO [SimpleAsyncTaskExecutor-3]: Load type is [Load dimension member].
2012-08-27 09:46:43,996 INFO [SimpleAsyncTaskExecutor-3]: Load process completed.

Do any members exist in the account dimension before the load? if not can you try adding one member manually then trying the load again.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load metada into Hyperion Planning using ODI

HI All,
I am using ODI 11g and trying to load the metadata for Hyperion Planning application 11.1.2.1. But I couldnt load all the Product members in Product Dimension.
Could able to load few members but was able to run the interface successfully but thrown error while loading few members(Most of the members are shared members, verified that base members existed). Please find the below error log.
2011-11-17 06:18:06,534 INFO [SimpleAsyncTaskExecutor-2]: Oracle Data Integrator Adapter for Hyperion Planning
2011-11-17 06:18:06,550 INFO [SimpleAsyncTaskExecutor-2]: Connecting to planning application [xxxx] on [xxxx]:[11333] using username [xxxx].
2011-11-17 06:18:06,675 INFO [SimpleAsyncTaskExecutor-2]: Successfully connected to the planning application.
2011-11-17 06:18:06,706 INFO [SimpleAsyncTaskExecutor-2]: The load options for the planning load are
Dimension Name: Product Sort Parent Child : false
Load Order By Input : false
Refresh Database : false
2011-11-17 06:18:06,768 INFO [SimpleAsyncTaskExecutor-2]: Begining the load process.
2011-11-17 06:18:06,878 DEBUG [SimpleAsyncTaskExecutor-2]: Number of columns in the source result set does not match the number of planning target columns.
2011-11-17 06:18:07,440 INFO [SimpleAsyncTaskExecutor-2]: Load type is [Load dimension member].
2011-11-17 06:18:07,487 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D090, Mobile Mice Cordless_Prod type, D090-Flores DJ, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,503 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D091, Mobile Mice Cordless_Prod type, D091-Fiji BT, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,518 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D093, Mobile Mice Cordless_Prod type, D093-New York, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,550 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D060, Mobile Mice Cordless_Prod type, D060-Corbusier Vista, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,565 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D064, Mobile Mice Cordless_Prod type, D064-Sardinia Laser, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
2011-11-17 06:18:07,581 ERROR [SimpleAsyncTaskExecutor-2]: Record [[D065, Mobile Mice Cordless_Prod type, D065-Ibiza Optical, null, Shared, null, null, null, null, null, null, null, +, null]] was rejected by the Planning Server.
Regards,
SP

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load Dimension into Hyperion planning using ODI ?

Hi All
We are trying to load Dimension into hyperion planning Ver. 11.1.2 using ODI. We have created the interface and mapped the source csv file to target planmning application using ODI KM.
LKM file to SQL
IKM SQL to Planning
We get success in ODI's Operator but the Dimension is not updated nor new data is insreted.
We get this message in Error file:-
+
Retail Format,Parent,Alias: Default,Data Storage,Two Pass Calculation,Smart List,Data Type,Plan Type (APlan),Error_Reason
ABC,Total Format,,StoreData,,,,Aplan,Cannot load dimension member, error message is: java.lang.RuntimeException: Fetch of saved member "ABC" failed.
+
We get this message in log files:-
+
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Oracle Data Integrator Adapter for Hyperion Planning - Release 9.3.1.1
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Connecting to planning application [******] on [********]:[11333] using username [admin].
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: Successfully connected to the planning application.
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: The load options for the planning load are
     Dimension Name: Retail Format Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : true
2010-07-22 07:04:06,612 INFO [DwgCmdExecutionThread]: Begining the load process.
2010-07-22 07:04:06,612 DEBUG [DwgCmdExecutionThread]: Number of columns in the source result set does not match the number of planning target columns.
2010-07-22 07:04:06,659 INFO [DwgCmdExecutionThread]: Load type is [Load dimension member].
2010-07-22 07:04:06,675 ERROR [DwgCmdExecutionThread]: Record [[ABC, Total Format, null, null, StoreData, null, null, null, null, null, null, null, null, null, Aplan, null, null, null]] was rejected by the Planning Server.
2010-07-22 07:04:06,675 INFO [DwgCmdExecutionThread]: Planing cube refresh operation initiated.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Planning cube refresh operation completed successfully.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Load process completed.
+
Please help out .....

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

Data Integration from E-Biz Suite to Hyperion Planning

Hi Experts,
I am using EPM 11.1.1.1.0.
I have a requirement of integrating data from Oracle Gl to Hyperion.
I am going to use ODI for achieving the same but i observed a fact in GL around which i need some help.
Oracle GL maintains a relation between the entities and acconuts, (e.g a particular entity budgets against some specific accounts) ,however i do not see how in Hyperion I can replicate the same between the Entity and Accounts dimensions.
Can somebody please put some light on this...?
Any help will be greatly appreciated.
Regards.
Alicia
Edited by: Alicia on Aug 10, 2009 10:52 PM

Alicia,
It sounds like you're talking about cross-validation rules. There are two issues this lack of functionality presents in Hyperion Planning:
1) You want forms to be dynamic so that users only see the Entity/Account combinations that are relevant.
2) You want security to prevent users from sending data to invalid Entity/Account combinations.
Hyperion Planning doesn't support this requirement well, although there are some workarounds to "simulate" cross-dimensional security.
This post may help explain:
How to enforce valid member combinations in Planning?
Hope this helps,
- Jake

Data Integration from Oracle GL to Hyperion Planning

Hi all,
Can I knw the steps for extarcting the from Oracle GL Tables to Hyperion Planning?
We have installed hyperion 9.3.1 and ODI 10.
Please let me know how will we do this process by using ODI?
Thanks

Hi User##########,
In a nutshell you need to do the following...
1. Create a Project in ODI
2. Define your Source and Target data stores in Topology
3. Import the appropriate Knowledge Modules
4. Reverse Engineer your Source and Target modules to create a model
5. Create an integration to load from your Source (Oracle GL) to your Target (Hyperion Planning -- I actually prefer to load the data directly to Essbase)
I just did this last month. When loading the data I used an Essbase load rule to ensure Essbase knew the column order.
I was also able to load data via ODI from a flat file WITHOUT a load rule but the order of the data in the file was very important. I was also not able to substitute or alter the information in the integration when this was done. So in the end I still needed to have a load rule handy.
I'd recommend reading up on the ODI documentation for this -- some of it is actually quite good. http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_6.htm Check out the "Oracle Data Integrator Adapter for Hyperion xxx" section.
-Chris
P.S. Check out John Goodwin's blog -- there's some neat stuff in there and you'll probably figure out some neat stuff on your own too.

ODI and Hyperion Planning help

Hi,
I have 2 Hyperion Planning 9.3.1 servers setup for Finance and HR applications. I want to copy data from the HR application to the finance one.
I have ODI 10.3.5 setup on a separate machine with Hyperion Planning adapter installed. In the topology manager when I try to create a new data server under Hyperion Planning, I don't see the Application (catalog) and Application (work catalog) drop downs filled.
I have checked the RMI registry service running on the hyperion server and port 11333 is also free.
I am new to ODI and I'm trying to configure it using Oracle's guides.
Imran.

Hi,
I was following instructions on John's blog and now I'm stuck at a new error. While trying to start the agent I get the following error.
E:\OraHome_1\oracledi\bin>E:
E:\OraHome_1\oracledi\bin>CD OraHome_1\oracledi\bin
The system cannot find the path specified.
E:\OraHome_1\oracledi\bin>agentscheduler "-port=20300" "-name=odi_demo_agent"
A JDK is required to execute Web Services with OracleDI. You are currently using
a JRE.
OracleDI: Starting Scheduler Agent ...
Starting Oracle Data Integrator Agent...
Version : 10.1.3.5 - 10/11/2008
com.sunopsis.tools.core.exception.SnpsRuntimeException: com.sunopsis.core.Securi
tyAccessException: Unable to establish a connection to the work repository, plea
se check the connection parameters.
at com.sunopsis.dwg.cmd.n.a(n.java)
at com.sunopsis.a.f.run(f.java)
at com.sunopsis.dwg.cmd.i.y(i.java)
at com.sunopsis.dwg.cmd.i.run(i.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.sunopsis.core.SecurityAccessException: Unable to establish a conn
ection to the work repository, please check the connection parameters.
... 5 more
Caused by:
com.sunopsis.core.SecurityAccessException: Unable to establish a connection to t
he work repository, please check the connection parameters.
at com.sunopsis.dwg.cmd.n.a(n.java)
at com.sunopsis.a.f.run(f.java)
at com.sunopsis.dwg.cmd.i.y(i.java)
at com.sunopsis.dwg.cmd.i.run(i.java)
at java.lang.Thread.run(Unknown Source)
I got the solution to this problem at this link Error while starting agent in ODI but its not working for me. I have done everything the way its described on the blog.
Imran.

Oracle GL Integration with Hyperion Planning

Dear All,
I need to integrate Oracle GL with Hyperion Planning.
My Question are:
1) Without any adapters, we can do this integration(Using PL/SQL). It is Possible?
2) Any document is available for intergration using the adapters(DIM/ODI).
ODI - Using ODI, one way of integration is possible(Oracle GL to Planning)
DIM - Using DIM, two way of integration is possible(Oracle GL to Planning & Planning to Oracle GL)
can u guide me in this situtation.
Thanks,
PC

H John,
Thanks for the prompt reply.
I am using Hyperion 9.3.1 with Oracle 10g. This is the first time, i am trying to do the integration with Oracle GL. My client dont have licenses for DIM, they are not ready to buy the licenses.
There is anyway to load the essbase cubes through Oracle tables.
John, This is my idea(Can u please suggest me on this). I am doing this in a test environment.
1) From Oralce GL server, I am taking the Trial Balance values into flat files
2) I am creating one Oracle table for TB_ORAGL(In Planning Server)
3) In Planning server, i am importing the flat files(TB_ORAGL) to the Oracle
4) From oracle table(TB_ORAGL), i am trying importing the data to essbase cubes using data load.
Vice versa steps for Hyperion Planning to Oracle GL.
can u guide me in this situtation.
Thanks,
PC
Edited by: dwhpc on Oct 21, 2009 1:55 PM

ODI Hyperion Planning Integration

Similar Messages

Maybe you are looking for