ODS To Cube Data Load

Hi All,
I am loading data from ODS To cube both are daily delta loads.
Is cube get data from change log / active table of ODS ; remmber both are delta loads.
Please help ASAP.
Regards
Karuna

Dear Karuna,
1.WHEN DATA IS FIRST LOADED IN TO THE ODS IT IS PRESENT IN THE ACTIVE DATA TABLE,
2.WHEN YOU LOAD IT INTO THE CUBE CUBE WE HAVE TO ACTIVATE IT THAN THE DATA COMES TO THE CHANGELOG TABLE,
3. FROM THE CHANGELOG TABLE THE DATA GOES TO THE CUBE.
.....HOPE YOU GOT UR ANSWER
REGARDS
TRIOD

Similar Messages

Ods to cube data load verry urgent

Hallo ALl,
i have started the int from ods to cube (data packet 1200000) and its talking hell of time there are 85 data packet, can some suggest me how can i seep up the data load.
regards sanjeev

hi
1) Stop the load first.check the job log and st22 if htere any shor dumps
2) go to the *8 gnerated infosource...
3) createa New IP.with the option as PSA and datatarget
4) it will take little time but it wont fail..
5) this will process package by package...
hope it helps
regards
AK

Summing up key figure in Cube - data load from ODS

Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field   quantity
123                301          10
123                302           20
123                303           30
Expected record in Cube
Header-field       Quantity
   123                    60
====================
Regards,
Pramod.

Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod.

ODS to CUBE data failed

Hi,
Iam transfering the data from ODS to CUBE with out using PSA, data is coming to ODS properly but from ods to cube delta update is failed how should u updated from ods to cube with out distrubing the delta, plz clarify my dought, i will appreciate your help.
cheers,
manikanta

Hi,
We should find out the reason for uploading error. We can get the information sonetimes form M0nitor or from SM21 or from ST22. So find the cause of failure first.Then we can think about the solution to that problem.
With rgds,
Anil Kumar Sharma .P

ODS and cube data

Hi All,
Please let me know the difference between ODS and Cube practically with a simple example. I red and know diferences but I did't get the concept.
1. What detail level reporting. How ODS supports this and not in Cube?
2 .When we go for ODS(daily/latest info) and Cube(monthly/ aggreated info )?
3.Where can we see the diff. I know overwrite & addition?
Please explain me with example.Surely I will assign points.
Thanks in advance.
Cheers,
Sri.

HI ALL,
Thanks for your immediate replies.
I did a file upload with full load to ODS:
1st load
======
CID PRICE QTY
C01 10 1000
C02 20 2000
C01 20 2000
In Active table & change logs:
======================
CID PRICE QTY
C01 20 2000
C02 20 2000
2nd load
======
CID PRICE QTY
C01 35 1500
C02 40 2200
C03   5 100
2nd load Active table
=================
CID PRICE QTY
C01 35 1500
C02 40 2200
C03   5 100
In Change table
======================
CID PRICE QTY
C01 20 2000 N
C02 20 2000 N
C01 35 1500
C01 20- 2000- X
C02 40 2200
C02 20- 2000- X
C03   5 100   N
I generate report on ODS, but we I can't see any details. It shows only latest info , what we have in Active table.
We can do the same detailed in info cube also, if we check DB aggregation.
I have a doubt:
customer orders in a day :
CID PRICE QTY DAY
C01 5         15   2007.05.03
C01 5         25   2007.05.03
C01 5         35   2007.05.03
C01 5         45   2007.05.03
we load this 4 times and overwrites evry time and see the latest record.
In ods : we can see :this only : latest :
C01 5         45   2007.05.03
In Cube: we can see
CID PRICE QTY DAY
C01 5         15   2007.05.03
C01 5         25   2007.05.03
C01 5         35   2007.05.03
C01 5         45   2007.05.03
and <b>if we check DB aggregation.</b> we can see
C01 5         120   2007.05.03 (summed all)
With my know knowlege we can see detail BW report on cube . all 4 records we can see , but in ODS we ca see this rec
C01 5         45   2007.05.03 only
Please explain , how ODS support detail record and cube supports summarized.
Thanks in advance.
Cheers,
Sri.

Reporting(ods to cube data)

hi friends,
i have 3 recodrs , i loaded from flat file to ods again i loaded ods to cube.
now i added 1 record in flat file. first i had sent delta to ods, again i had sent to cube. so in cube first 3 records and 1 recoprd delta.
if i will go to rrmx, i need to get all records(3 and delta 1 total 4 records). can i get 4 records in reporting or not.
Thanking u
suneel.

I am not really sure to understand your needs. In fact, do you want to aggregate all the records together or just show them in a report? If this is the last option which suits the more, you can include the request id in the structure of your query and then hide it in the properties.
If you just want to aggregate the records all together, the BW process will perform it for you.
Regards,
Cyril.

Movement types data not capturing from BW cube data load

Dear Experts,
We are supporting BPC 10.0 Netweaver consolidation activities.
As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
ZFIGl_CA10 : From this cube the YTD closing balances of the balance sheet items are captured.
Opening balances are copied from the last period of the previous year through balance carry forward.
For a balance sheet itens, we are getting the F99 closing balances correctly captures.
But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
No modifications are done for both the file.
Please find the below attached screen shot and kindly help me on the same.
Regards,
Shilpa

Hi Shilpa,
I had the same problem in mi last consolidation implementation and the solution in this case was
implement all the data flow for the 0FI_GL_014,
Regards,
Mario

ODS vs Cube Data

Hi Experts,
I have a query on Data between ODS and a cube.
I have only one row for a material number in the ods but has got many rows in the cube with negative (minus) sign on the key figures and when i use the aggregate option then the number of rows in cube and ods are same and with the exact result in both.
But where from these negative values fields come up which after summation gets removed as there is only one row in the ODS below it.
lets say for example
In ODS
Matnumber           plant                      Quantity
1                              Y                            3
In cubde
MatNumber                Plant                           Quantity
1                                   Y                                     3
1                                  Y                                     0
1                                    Y                                    3-
1                                   Y                                     3
because 30(-3)+3 = 3
and thus the aggregated result comes to be
MatNumber Plant Quantity
1          Y       3
now where dose these extra records come from and after aggregating i get the same result as of ODS
please clarrify how does these records with minus sign comes when there is only one row for paritcular material in the ODS below the cube
Points assured on helpful answer
thanks
puneet
Message was edited by:
        Puneet Chawla
Message was edited by:
        Puneet Chawla

Hello Puneet,
You get those records from change log table of ODS. Please check the changes Log table.
Thanks

CUBE-Data Load Error

Hi,
I had a infoobject (CHAR) ZAGE of type NUMC,Lenght 5.
It contains Age in years & Months
Values like 21,21.1 (21 Years,1 Month),22.11 (22Years,11 Months),99.11 (99Y,11M)..etc
Thease values are calculacted in DSo and when i try to transfer data from DSO to CUBE it is showing me below erroe
Value '22.1' of CHAR age is not a number with 000005 spaces
Please update me how to proceed
Thanks

Hi,
though u are using NUMC it considers as char, if u are loading 1 it considers as '1' means it treats as char 1.
NUMC only allows numbers not '.' .
DSO does not checks any conversions but checks conversions.
if u want to load age then u can opt for keyfigure with data type as number.
Thanks,
Pavan.

Cube to cube data loading

hi all
i am trying to reduce the no of records in the cube
let me explain in detail
i am trying to load data from 0sd_co2 where i got data at week level <i got the records for every week>
i want to use the data for monthly the same records
to do that i am trying to load the data to other cube for monthly transactions
how do i do that
pls explain me in detail
<or even if i got transactions every day level then how do i change to weekly level so that i can reduce the num of records >
thanks in advance
regds
charan

Hi Shiva,
1. Create an export datasource on your cube 0SD_C02.
2. Create a cube similar to 0SD_C02 with one chnage. Use 0CALMONTH instead of 0CALWEEK.
3. Now in the update rules for the new cube convert the 0CALWEEK to 0CALMONTH.
Bye
Dinesh

Loading from ODS to Cube in process chain

Hi Experts,
How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
Thanks,
Bill

Hi,
You can use a DTP for this.
Create transformation between DSO and cube.
Create DTP and run it.
Loading data from one cube to another cube.
Cube to cube data loading
how to upload data from cube to cube
Can we pull data from one cube to another cube
Data Load Steps:
Reading data from another cube
Hope this helps.
Thanks,
JituK

How to identify the maximum data loads done for a particular day?

Hi all,
There is huge volume of data been loaded on a last monday, and then data was deleted from the cubes on the same day. And hence i needs to see which are all the cubes which was loaded wtih lot of records for a particular day,
i happened to look at rsmo, i am unable to see the ods nor the cube data loads,
were do i seet it?
Thanks

See if the table RSSELDONE helps. This will give you the recent data load details. Based on those loads , you can search the targets.
And also check table TBTCO which will give the latest job details. You will have to analyze the same jobs to know what loads were done . Give a selection for date.

Cube full load failed

Hi Experts,
When i am loading the data from ODS to cube (FUll load) load is failed due to the below error.
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Error correction:
Follow the instructions in the short dump.
and i checked in ST22 and the error analysis is,
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "WRITE_ICFA
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
Please can any one tell me why the error occured and how to resolved.
Thanks in advance
David

David,
It appears that there was a Table lock when you executed your DTP. This means that there was a multiple read on any of the tables used by DTP at the same time. This has resulted in the error. Check your PC's once.
As of now, delete the request in IC and reload!
-VA

Find ODS's with data that is not activated

Hello,
Does anyone know a systematic way to find ODS objects containing data loads that are not activated?
we are working on a system upgrade and this is one thing that we have been asked to identify.
Thanks,
Nick

Hello,
I found something that will work.
In RSA1 I clicked on the 'Modelling' tab in the left pane.
I then clicked on the 'Status Overview' and I was able to review the ODS's there.
Thanks,
Nick

Query on Data loading

Hi All,
I am loading the data to ODS and the data loading is happening (The Status is showing in Yellow) . While loading, can i schedule the data again.Previous request is already in Yellow status. What will happen if i schedule the data load again.
Pls suggest.
Thanks,
Jelina.

Try to understand loading process to ODS -
Extract Structure
PSA
Trasfer structure
Communication Structure
Through Update rule to New Table
Activation Process
Data updated in Active & Change Log table.
In your case second load will process till Active Table & if First load is still yellow by the time of activation of second load then second load will fail as active table is locked by first load.
If first load is completed then second will go through successfully.
Hope this helps.
Regards,
Viresh

ODS To Cube Data Load

Similar Messages

Maybe you are looking for