Office 2010 DDE not being added to registry

I have captured and done a test deployment of Office 2010 with SP1, everything works fine, activation (KMS using app-v toolkit), all the apps launch, the icons are all there, but...
There is one application that is used that doesn't pick up the fact that Excel and Word are installed. The application is SIMS .Net (An education MIS system by Capita)
Looking at the file type settings, .xls files are associated with the spoon-launcher app. Delving into the registry though, there are no DDE (Dynamic Data Exchange) commands listed for any of the Office 2010 apps. I have compared this with the ThinApp version of Office 2010 that we previously used and that does include the DDE settings in the registry and enables SIMS .Net to work fine. There is only a single command listed, which points at the spoon-launcher.
Looking at the capture for Office 2010 all the DDE commands for each file-type have been captured correctly. Registry values have been added to HKCU and HKLM. HKEY_CLASSES_ROOT has no entries added though, they exist on the actual snapshotting PC though.
When using spoonreg I have been doing
spoonreg /allusers /cache Office-2010.exe
Windows XP + SP3 (with windows updates) no other apps installed
ZAV 9

My guess is your going to have to add a "ProgID" under the MSI Setup section of ZAV. That is where I'd be exploring. What ProgID and extension combination needs setup. As noted in my other post...
http://forums.novell.com/novell/nove...ssociates.html
I had to include a ProgID that was in the captured registry information but wasn't being automatically brought into the MSI Setup section for Adobe Acrobat 9 Pro.
Also about the classes root being blank. You probably want to look at HKLM\SOFTWARE\Classes\. That is the same thing as Classes Root and ZAV just knows not to pull both of them in because that would just be duplicates. It shows as "Local machine root\SOFTWARE\Classes\" in ZAV. You can dig around in there to see if there are ProgIDs that were captured with the install but that need manually added to the MSI Setup area.
Thanks,
Ryan

Similar Messages

The Adobe add-ins appear in MS Word (Office 2010) but not in MS publisher

The Adobe add-ins appear in MS Word (Office 2010) but not in MS publisher (Quick link from Ribbon) No add-ins show in settings in Publisher although they show in Word.
Have tried re-loading MS Office 2010
Acrobat X standard

Yes - it shows on a friend's computer (Windows 7) I am running Windows 8
64bit.
According to the tutorial it should also work in Publisher.
It shows and works perfectly in MS Word

OFFICE 2010 can not open EXCEL files by double click, only File Open....

Hi:
I am using WIN7 ultimate 64 bit and excel 2010 (office 2010 Pro plus).
I can not open any excel file(.xls and .xlsx) with a double click on the file. if I double click on the file, the application launches and excel starts, but no file is loaded and no error message, I have to manually go file open and select the file and
then it opens correctly...
I have tried every solutions I can find from internet, but none worked....
1.Repair the office 2010 instalation.------doesn't work.
2.Right-click the file >>Select "Open With" and select [Excel 2010]>> Check always use this program. ------doesn't work.
3.Options>>Advanced>>General section>>unchecked "Ignore Other Applications that use Dynamic Data Exchange (DDE)".------doesn't work.
4.Run>> input "Excel /regserver". ------doesn't work.
5.Create new user profiles.------doesn't work.
6.Delete EXCEL folder under "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\".------doesn't work.
Is there any other solutions can fix this problem? Any help are appreciated.
Yong.

Hello Yong,
Thanks for posting in our forum. Seems you've already tried lots of things, and I can see that those are all steps that reportedly have worked for others.
Here is one more thing that you might want to have a try:
Open Registry Editor
Go to the registry key HKEY_CLASSES_ROOT\Excel.Sheet.12\shell\Open\command
Highlight the key, select the (Default), select "Modify..."
from the pull-down menu and then enter the value below: "C:\Program Files\Microsoft Office 15\Root\Office15\EXCEL.EXE"
"%1" (include the quote marks)
Then OK your way out
Please have a try and feel free to post back.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Contacts created on iPhone not being added to Address Book

I want to sync all my Address Book contacts to the iPhone, which is working fine, but any contacts created on the iPhone are not copied to Address Book during syncing, which is rubbish.
In iTunes I currently have 'All contacts' selected for sync. Am I overlooking some iPhone setting somewhere?

I tried erasing all the phone data as you suggested, but to no effect whatsoever (apart from having to setup my email/wifi etc. all over again).
There's definitely something strange going on with the iPhone -> Mac connection. iPhoto shows the iPhone as being connected, even when it's not, and is still showing 23 pictures, which is what was on the phone before I reset it (they are now gone from the phone). iPhoto also calls it 'Apple iPhone', while I've changed the name to something else.
Calendar syncing is still functioning flawlessly, but contacts created on the phone are still not being transferred.
What's more, the contacts I added to the iPhone before I reset all the data were still on the phone afterwards.

Office 2010 "outlook not installed"

I have a user (I'm their IT support) who has a BB Curve 8350 (?) and when they try to sync to office 2010 (calendar and address book) it lets me configure it in Intellisync but then gives me an "Microsoft Outlook Not Installed" error directly afterwards. Office is very clearly installed because I can open it up and check email etc. I'm using Windows 7 32 bit OS, Office 2010 32 bit and BBDM 6.0.1 B21. Phone is also updated to 5.0.
I've hunted through the forums but haven't found my answer. Any suggestions?

I have the same problem. Please need help

5x promotional points are not being added

I purchased a lg washer and dryer during the 5x points promotion in October and when the points were added the points were just the standard points, not the 5x points. I have contated eliteplus support many times about this issue and it is still not being corrected. I made a seperate purchase the same day of $11,000 and received those points correctly. Why am I not receiving my points???????

Good afternoon skylerssmith,
Welcome to the Best Buy form!
I pulled up your My Best Buy™ account using the email address you registered with the forum, and it does appear that the base points for the two purchases you made back in October have officially posted. From what I can see, those two purchases were made at one of our Pacific Sales stores. The points a member can earn for a Pacific Sales or Magnolia purchase do tend to post a bit differently, as they are processed different than a normal Best Buy store purchase.
I would like to gather some additional information and go over your My Best Buy™ account with you to see what I can do to help, so I will be sending you a private message. You can check you private message by logging into the forum and clicking on the yellow envelope at the top of the page. I look forward to further speaking with you.
Where Are My My Best Buy Bonus Points?
Thank you for posting and for being a My Best Buy™ member.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

BEx Analyzer with GUI 720 and MS Office 2010 does not work

I have recently installed SAP GUI 720 with BEx addon (7 and 3.x) on a computer with Office 2010 and Windows 7.
All BEx components work fine except Analyzer 7.
When starting Analyzer 7 nothing happens.
I have tried instead starting transaction RRMX from a BI system but this generates a short dump.
Does anyone have an idea about what could be the problem?
<<text removed>>
Best regards,
Didrik
Edited by: Matt on Sep 22, 2010 8:17 AM

Hello Didrik von Essen,
guess its issue with Excel Addins. i rectified the same issue by enabling the excel addins.go to Application wizard. and change the please find the screenshot . let me know if it works

XServe Drive Failed, replacement not being added

Have an XServe running 10.6 with three bays, configred as RAID5, SATA drives. One drive failed. We swapped it out and the new drive appears in the RAID Utility and he documentation says it should automatically be incorporated into the set, but it isn't. The set still appears as Degraded. The drive says SMART is Unsupported even though it is an SATA drive of the same size. Everything else looks the same as the other drives so we can't figure out why it's not being used. We're thinking (hoping) a server reboot will kick start things, but shouldn't hot swappable mean you don't have to do this?
Thanks,
Jeff

Rebooting made SMART status change to "Verified". Re-ejected and reinserted replacement drive and tried Verify RAID Set and got the following in the log (drive in bay 2 is what died):
Monday, September 10, 2012 5:17:37 PM ET
The "RedundancyScrub" command could not be executed. (Invalid request or invalid parameter in the request.)
warning
Monday, September 10, 2012 5:15:45 PM ET
Drive carrier 00:02 inserted
informational
Monday, September 10, 2012 5:15:15 PM ET
Non-viable RAID set JBODSet1 and all associated volumes are offline
critical
Monday, September 10, 2012 5:15:13 PM ET
Drive 3:50014ee1026699f4 missing - Replace immediately or acknowledge loss of RAID set JBODSet1 and associated volumes
critical
Monday, September 10, 2012 5:15:13 PM ET
Drive carrier 00:02 removed
informational

Particular section is not being added in Object.

Hi All,
I have tried to add a particular section in a particular object in stagging environment but the same section I have added in production,it is being able to add in that.
Why does it happen so in production and why not in stagging.I have given the same setting in stagging also.Actually I am not able to find that section in My Setup.
Thanks,
Kunal.

Question: By Section do you mean "Related Information Section" or a Section on the Parent Object link (Contact Information, Address Information etc...)
If it's Related Information Section then then you could look at the below points
The reason this could happen is that someone may have logged in with that user id and personalized it, by going to "Edit Layout" on that Object's Detail Page. There will be 3 links below the Web Tabs. Click the "Edit Layout".
Let me know

AR Credit Note not being added.

Hi All,
I'm trying to add a AR Credit Note based on a AR Invoice. The only thing that I change is the Warehouse code that the credit note should be credited to. The error that I receive is "Document cannot be added because the base document row was updated. Copy the document again from its base document. Message[439-197]".
Can this be because of the warehouse code I changed? We change the warehouse code continuesly without error this is the first one.
I'm on SBO 2007A SP00 PL42.
Any help will be greatly appreciated.
Thanks
Lou

hiii Lourens
NO, that should not be the reason, i guess you have some returns, try adding taking base doc as return?
       check this thread
This document cannot be added Error
                                                          Good Luck
                                                                          RIYAZ

Files not being added to an Apple hosted feed collection

Main Issue: I created a collection using an apple hosted feed, added 12 new items, but it still says I have 0 items in the collections dashboard so am not able to publish the new collection.
Yesterday I added two files to an existing collection, but today they still do not show-up even in the preview mode.
Today I created a new collection and added 12 items (.mp4 & .mov), but the number of items shows 0, so I am not able to publish the new collection.
The apple generated feed shows the files - https://deimos.apple.com/WebObjects/Core.woa/GetRSS/mdanderson.org-dz.2392641385 5.023926413857
Looking though the discussions it looks like some others are experiencing the same issue since May 10 (https://discussions.apple.com/message/22011781#22011781). Has anyone experienced this or have a solution. Do you know if it is something on our end, or on Apple's?

I think it is Apple's issue. I ever came across the same problem several days ago. Apple says it takes up to 24 hours to refresh the new items added. But one day later I can't see my new item on iTunes U live site, even preview site.
Later I re-uploaded the same video and clicked the "Refresh" button. About 2-3 hours the item shows up.
Not sure the "Refresh" or Apple server get it work.

Office 2010 does not open when trying to create a new blog post in SharePoint Server 2010

Hello Community,
today I noticed a strange behavior of my office client (in this case, the word application).
When I try to launch the default blog programm to post in a SharePoint 2010 teamblog, the word application won`t start and the following error message appears:
Did anybody already face this issue ?
Would be very glad, if someone could give me a tip.
Thanks in advance for your support.
- Gabriel

Hi Gabriel,
After installing the fix, whether you run SharePoint 2010 Products Configuration Wizard.
In addition, if this issue still exists, please take a look at:
http://answers.microsoft.com/en-us/office/forum/office_2010-word/opening-more-than-one-file-in-word-2010-error-word/f91632a0-59d5-45de-8038-14d08128cc10
http://support.microsoft.com/kb/2119612/en-us
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

(bug) Songs are not being added to my playlist

I've been having an incredibly frustrating bug on my computer recently (windows). Basically some songs i add just won't enter the playlist. As of now i have 3 playlists, playlist A, B & C. Most times i can add songs to playlist B and C, but i can't add any songs to playlist A unless i log in and out of the client. It's incredibly frustrating because sometimes i find a playlist or an album i really like, i listen through it & add the songs i like only to find out they haven't been added once i return to the playlist later. Yes, I am 100% that it's a bug and not me accidently adding it to a different playlist. Right now i'm adding a song to the playlist but it just doesn't get added. If i click "add" multiple times it doesn't give me any warning about duplicates either since the song never gets added. I've tried adding from everything; a new playlist, the artists page, the original playlist, nothing. Now i need to relog everytime i add a new song and it's making spotify very hard for me to use.

you still need to authorise your computer though. in the advanced menu, select authorise computer.

Voice memos in iTunes not being added to iPod

The Apple store told me to get rid of a bug on my iPod to set it up as a new iPod and not restore it from a backup since it was most likely a software issue and not hardware (music was skipping randomly even when not on shake to shuffle). Everything is fine now except that I cannot get my old voice memos back on my iPod Touch4G. They are in iTunes and before I sync I makes sure the "include voice memos" is checked, but it still does not work. Any suggestions on how to get these back on my iPod? Thanks.

Thanks for the help!

One username and password not being added to keychain

I have entered a username and password for a webpage and answered yes when asked it I wanted this saved it to my keychain.
However I can not find the u/n and pass word in my keychain (Safari>Preferences>Passwords) and this u/n and pw is not shared with my other devices. All my other u/n and pw are in my keychain and are shared with all my other devices.
Can I manually add a u/n and pw to my keychain?

Hi Matt,
I did previously have "Private Browsing" selected and deselected that and that is when I could set up FF with my username and pw but could not on Wells Fargo. So, I did what you suggested and that was to delete cookies because that seemed like a good reason but alas, it still will not give me the option to set up the username/pw.
I would not be surprised if it is Wells Fargo, they are a bit of a pain. You cannot even save them in Bookmarks because I was told they are constantly making changes to their site and this stops the bookmark from working.

Office 2010 DDE not being added to registry

Similar Messages

Maybe you are looking for