Office 365 Settings

I have just received my Sony Xperia Z  Tablet.
I have been trying for hours to get it to sync with my Office 365 account but can not get it to sync.
I have lauched the email accounts on my Sony
Created a new "Exchange Account"
Put in my Email address and Password
On the next screen I have tried the following settings
Domain\Username: myfullemailaddress
Domain\Username: myfulldomainnmae\myfullemailaddress
for server i have tried
Server: m.outlook.com
Server: pod51014.outlook.com  (this is what i use on my samsung but will vary for different people)
Server: amsprd0xx0.outlook.com ( this is my host address I have masked 2 digits)
I have ticked use SSL
I have tried both ticking and unticking accepting all ssl
no mater what I do I can not get this tablet to sync with office 365

Just ignore this. Ot's not hard at all (when your wireles has not dropped that is)
domain\Username: YourFullEmailAddress
Server: m.outlook.com

Similar Messages

  • World minutes for Office 365 settings

    I have not been permitted to make a call. To a land line despite having 43 minutes still available to me. Skype says I don't not have credit but I do not need it with the world minutes I have allocated to my account on a monthly basis. Please revert back to me
    Solved!
    Go to Solution.

    Problem solved!

  • Problem with KB 2630976 (related to Office 365 signup) in WSUS

    I see that 2630976 is shown as needed by all computers yet when approved no computers install it though WSUS still shows the update as needed. The only posting I've seen about this is from SBS Diva with a recommendation to decline it. Has Microsoft provided
    any guidance on this? For more info see:
    http://support.microsoft.com/kb/2630976Kevin Severud CCNA Security & Wireless, MCITP:EA & EDA7 MCTS Exchange 2007, MCTS SQL 2005

    I know this is ancient, but it has come up in my environment since it shows up as necessary when running Office 365 Settings
    Office 365 is not patched by WSUS or Microsoft Update, so is functionally out of scope for this forum.
    If an update is showing as needed on Microsoft Update, then the client has something other than Office 365 installed.
    If anyone who replied to Kevin had taken the time to actually go to the link, they would've noticed that it is not an update at all.
    Also worthy of note, I don't have this update on my WSUS servers and it's not listed in KB894199 or its ancestors, so I'm curious how this update got on your WSUS server, and what product category it is assigned to. (Not to say that KB894199 might be
    flawed, but for an update to be absent both locations is somewhat unusual.)
    I did question the legitimacy of the claimed update in my Jan 14th reply. You'll note the O.P. abandoned the thread and never responded.
    In WSUS, it is classified as Update Rollups for products Microsoft Online Services Sign-in Assistant
    But if it exists in WSUS in Update Rollups and has an Update Title, then it *IS* an installable update. WSUS does not synchronize "informational documents".
    but I'm racking my lower end tech savvy brain trying to figure out why Outlook crashes so much for members of my organization even prior to a full load of users.
    That's something you'll need to take up in an Office 365 forum (if you are using O365), or a Microsoft Office forum (if you're using Office 2013).
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Report all activations of Office 365 ProPlus for all users

    Hello:
    I know that I can open my Office 365 Settings, Software, and see how many devices I have activated Office 365 Pro-plus on.
    What I am looking for is a way for an Admin to run a Powershell script (or command) to retrieve the activations for ALL users in a tenant.
    Thanks
    Tim

    Hi Tim,
    As far as I know, this is not possible. We can use Get-msoluser command to get the license status. But we can’t get details of all users’ activated computer name list for the Office 365 tenant with a Powershell script.
    By the way, this forum focuses on questions and feedback for Microsoft Office Client. There is not so much about Office 365
    console/hosted/cloud aspects here. For your case, I would suggest you to post in the forum of Office 365 Community, where you can get more experienced responses:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Passport Calendar Sync Office 365

    I'm having an issue where my Office 365 calendar events are being disaplyed in UTC time. It doesn't matter whether I add them via the passport or outlook, same problem. I've checked that my time zone on both the Passport and in my Office 365 settings are correct and the same. I've removed the account and added it again but still having this issue.
    Anyone else out there using Office 365 have the same issue?
    Solved!
    Go to Solution.

    I fixed this by changing the time zone on the phone to something else and then changing it back to what it should be. All calendar entries now appear with the correct time.

  • Office 365 included call minutes

    Bought Office 365 on 30 January with 60 minutes included calls to fixed lines as I am in Australia. Have made a few calls and the used time is correct in my Skype account. If I click on Office 365 settings link the remaining minutes is correct however it says until 28 March. This is not correct it should be until end of Feb as I bought on 30 Jan.

    i have one skype account connected to my office 365 subscription and never work since first subscription day. in my office account i can see : 'Your Skype minutes are active. Visit your Skype account', in my skype account i can see :
    Microsoft account
    [e-mail removed for privacy and security]
    Skype Name
    n48_______
    so i have one account for microsoft 365 and one skype account linked together and no active minutes...

  • Where are stored the data settings of Project Pro for Office 365?

    Hi,
    I'm using Project Pro for Office 365 connected to Project Online. Where are stored the settings we saved in
    File / Options (Project Pro). I'm thinking of roaming users.
    Thanks

    I believe it is stored in the registry setting:
    HKey_Current_User\Software\Microsoft\Office\15.0\MS Project\Options
    Julie

  • CF10 office 365 email settings result in undelivered mail

    Hello, can someone help me with the Cold Fusion admin settings to allow mail to be sent using Office 365?
    Thanks,
    Renee

    Hello,
    Yes, there are entries in the log file.  I sent them to you.  Do you need the mail file again?
    This is the error:
    "Error","scheduler-4","10/08/14","11:00:33",,"javax.mail.MessagingException: Could not connect to SMTP host: smtp.office365.com, port: 587;   nested exception is:      javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?"
    Thanks,
    Renee

  • Error while saving a workflow via sharepoint designer Office 365: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities

    Hi,
    I get the above error whenever I try to save a new WorkFlow. I have cleared the caches
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>, and
    I still get the same issue.
    We are using SharePoint Designer 2013 (15.0.4569.1503) and connecting to SharePoint 2013 on Office 365.
    Can you please provide more insight?
    Thanks.

    Hi Rake,
    You can compare your PC and another machine which is working, see if it is related to IE settings(e.g. SharePoint urls in trusted sites zone).
    And you can try re-install the SharePoint Designer 2013 with same version and bit-version(32/64) on your PC like another machine, then check again.
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Office 365 : SharePoint designer workflow platform not available

    Hi,
    We have Office 365 E3 subscription and I am facing issue creating any SP2013 designer workflow for the sites created via Custom Web Templates ?
    The option to create designer workflow with "SharePoint 2013 Workflow platform" is unavailable with message..
    "The option for SharePoint 2013 Workflow platform is not available because the workflow service is not configured on the server, please contact your server administrator"
    To add to the issue even if we create 2010 designer workflow, the workflow does not get associated with the list/library. I can see the workflow in SharePoint designer but not with library settings from the browser and of course the workflow is not executed.
    Can anyone please suggest any solution ?
    Thanks in advance.
    Rajesh

    Hi,
    If you are a tenant administrator please log into your admin account
    navigate to this  "https://youraccount-admin.sharepoint.com/_layouts/15/online/TenantSettings.aspx"
    In this page,under connected services, deselect the "Block
    SharePoint 2013 workflows".
    Murugesa Pandian.,SharePoint 2010, MCPD | MCTS - Configure

  • IPhone mail app is not pushing Office 365 emails to show in my lock screen

    Hello,
    I transferred from one college to another last semester and set up my iPhone to receive school emails as I had at my previous school. Both colleges use the same email system, Microsoft Office 365. At my first college, my email functions worked perfectly fine, and everything showed up in my lock screen as I had set it to do. But upon transferring, only my personal emails would push to the lock screen. That semester, this issue caused me a good amount of trouble. Professors would email me asking if I could stop by their office between certain hours during the day, but only much later would I receive the email, and their office hours were long over. I am the type who checks her lock screen for notifications during the day, and only when I'm bored or have a certain purpose in mind do I unlock it, so I -desperately- need a way to resolve this issue. Does anyone have any tips or suggestions?

    Mail has to be running in order for you to be notified of new mail. It doesn't need to have any windows open. If you're sure that it is running in the background, open the Notifications preference pane and check the settings for Mail.

  • Cannot open document because Office keeps trying to sign in to Office 365 with the wrong account

    Problem: I cannot open Office documents from SharePoint on Office 365 because Office tries to sign in with my Microsoft account instead of my Office 365-account.
    History
    When we started the project, I did not have an Office 365-account yet for the organization I was working for. To get temporary access to SharePoint a colleague invited me on my Microsoft Account to gain access to SharePoint. This worked fine and I
    was able to access SharePoint. A few days later I received my official Office 365 account, so I also got e-mail etc. Because I now have an official Office 365 account, we removed my Microsoft Account from SharePoint. So now I only have access to SharePoint
    with my Office 365 account.
    The problem is that I can no longer open documents in Office. In the web version everything works fine, but if I want to open a document in for example Word, it says the document cannot be opened. Sometimes it shows a screen which says "Something
    went wrong". If I click through to go back to the website, it show me that it tried to login with my Microsoft Account and that this account does not have access to the site. It suggests to sign out and login with a different account, but this leads to
    a page that does not exist. I cannot figure out how to make Word use my Office 365 account.
    What I have already tried
    -Remove all my browser history and temporary files
    -Add Office 365 as a connected service in Office. I can sign-in with my Office 365 account and the location is added, but I still cannot open documents.
    -Tried a different pc. But because Office syncs al my settings, I got the same problem on all my pc’s.
    -Removed all my Windows credentials via the credential manager in the control panel. If I also remove the credentials for my Microsoft Account, Office cannot sign in anymore. At this point, if I try to access SharePoint, it asks me for my credentials
    and I have access to the documents. However, if I restore my Microsoft Account in Office again by entering my password, the problem is back.
    -As a work around I can add my Office 365 account as a separate Office account. I have access then, but it is really annoying because every time I want to open a document, I have to open Word, switch accounts, close Word and open the document. It is
    not capable of automatically selecting the account to use.
    Conclusion and question
    I have also worked with other Office 365 organizations which I can easily add to the connected services in Office and they work fine. So somehow Office has linked my Microsoft Account to this organization of Office 365 and it refuses to use the correct
    account. Does anybody know how to unlink my Microsoft Account from this Office 365 organization so that I can use the correct account?

    Try these steps from the source linked below:
    Stop connecting to a connected account
    You can stop connecting to a connected email account in Outlook Web App by removing the connection.
    In Outlook Web App, click Settings >
    Options > Account > Connected accounts.
    Under Account Name, select the account you want to stop connecting to.
    Click Delete to remove the connection.
    Click Yes in the dialog box to confirm that you want to stop connecting to the account.
    http://office.microsoft.com/en-us/support/connected-accounts-HA102836325.aspx

  • I use a PC for work and link it to Office 365. I also have an iphone and ipad. How do I synchronise these devices to Outlook without creating multiple copies of calendars?

    I use my PC for work (MS Office and Outlook). I also use Office 365. I also have an iPhone and iPad. I'm having difficulty getting Outlook to synchronise with Apple devices. I keep getting multiple copies of calendars and not being able to see contacts. Is there a process anywhere which describes the best way to manage these devices together? Or should I just give up on the PC and buy a MacBook or Air.

    Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
    However, the GUI does not change unless the user enters "about:config" and changes the locale.
    Is there a way to do this from the command line? I mean, changing the locale settings.
    And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

  • Office 365(O365) and Windows Security Pop-Up When opening outlook

    This post is being transfered from the office 365 team because they created a brand new profile and i still get the same problem when connecting to their newly created one.
    Any help you can provide would be much appreciated.
    I really would like email running. Thanks very much !!!
    Hi Everyone I have seen some threads on this topic and i have tried to follow all of their instructions and it hasn't solved my problem.
    So this problem started happening 2 days ago.
    Each time i open outlook I get prompted for Login Credentials. It has never happened before
    I have tested it using this tool https://testconnectivity.microsoft.com and it works fine
    I have removed my security credentials on the PC it hasn't solved it
    I have a number of tablets and they are working fine
    I have built new Outlook profiles
    I have tried it in safe mode
    In the Security settings for the Outlook Mail profile is set to Not Prompt for Security Credentials
    The Login Security Mode is set to "Negotiate Authentication"
    I have tried it with both Encryption and without
    I'm able to login to Email online and send and recieve emails that way.
    I have another user on Windows 8.1 and the problem started happening at the same time as me. I'm on Windows 7 Office 2010 Plus Proffessiona
    I believe the other user is on a newer version of outlook than me.
    I have spent all night trying different things and nothing has worked
    I could really use your help.
    Any help would be much appreciated i'm quite frusted not being able to send mail from outlook
    Hi Alan,
    I am sorry for the issue you are experiencing right now.
    On Tuesday, August 5, 2013 at approximately 12:45 PM UTC, we receive a report that some of the users were unable to authenticate to the Exchange Online service when using the Outlook client. However, the issue has been restored.
    Since you are still having the issue, please follow the steps below to do the confirmation.
    1. Please make sure that all Outlook security patches and updates are installed on the affected computer. To check for the latest Outlook updates, please click on the link below.
    2. To make sure whether the issue is related to the Outlook client or the service, please try configuring the test account I send you through private message on the affected computer to check whether the issue exists. To check the private message, please follow
    the steps.
    a. Please go to Your details section on the right side of the community site.
    b. Click Private messages.
    c. Click the subject title of the responses to read the message.
    Please provide feedback, then we can move forward to check where exactly to look into the issue.
    At last, I would like to confirm whether your organization only have Exchange Online or have hybrid environment.
    Thanks,
    Yang Yu
    I noticed something a bit strange that SMTP is automatically put in front of the mailbox name.. i haven't seen that before
    Went to windows update and there is nothing to install
    it's interesting you say the 5th because that is exactly the last day that outlook successfully synced.. it hasn't worked since.. This is happening on 2 seperate computers and stopped working at the exact same time.
    Hi Alan,
    Thanks for the update.
    Based on the currently situation, I understand when configuring the test account provided by Yang Yu the issue persists. And you have a number of tablets and they are working fine. Thus the issue could be related to the certain Outlook client on this certain
    computer.
    Since we focus on Office 365 issues in this forum, I'm so sorry that I’m not able to provide the detailed instructions.
    To provide you with a better service, and sort out this issue more effectively, I suggest you post this issue in the following Outlook forum. The engineers there will help you get the issue fixed in a timelier manner.
    Outlook forum:
    At the same time, I will also continue doing some further tests and research. Thanks for your understanding and great efforts.
    Any community members with related experience on this issue who could share it here are also appreciated.
    Regards,
    Xinyu

    Hi Alan,
    According to your description, the Outlook settings seems to be correct in your local machine. And some solutions have been tried to solve this issue:
    Create a new Outlook profile, start Outlook in safe mode, clean credentials cache in computer ect.
    But the issue persists. Please consider to configure your account on a computer which is working file with your colleague's Office 365 account to check whether the issue continues. If the issue only happens to your account, please access the mailbox in Webmail
    and change the password to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Need assistance creating applications with superseedence to uninstall Office 2010, Lync 2010 and then install Office 365 click to run 2013

    We are getting ready in a few months to uninstall our locally installed Office 2010 and head to the cloud with Office 365 2013. I have created applications to uninstall Office 2010 and Lync 2010 and then added them to the supersedence tab for Office 365
    office 2013 click to run with appv5.
    When deploying the office 365 2013 application it does not uninstall office 2010 or lync 2010 with the supersedence.  I am able to manually uninstall Office 2010 and Lync 2010 with the command lines I am using in the applications.
    The application uninstall for Office 2010 is:
    The application uninstall is an exe so I created an application, created a deployment type with the location of our Office 2010 admin point, installation program and uninstall program are set with the same line as I have tried to deploy it separately and
    also as a supersedence in the Office 365 application setup.exe /uninstall ProPlus /config "\\sccmserver\share\Office2010\ProPlus.ww\silentuninstallconfig.xml.  The silentuninstallconfig.xml was created from the original config.xml file and edited
    to these settings:<Configuration Product="ProPlus">
     <Display Level="none" CompletionNotice="NO" SuppressModal="yes" AcceptEula="yes" />
     <Setting Id="Reboot" Value="Never" />
     <Setting Id="SETUP_REBOOT" Value="NEVER" />
     <OptionState Id="ProductFiles" State="Local" Children="force" />
     </Configuration>
    The detection method is the folder path to see that office 14 exists.  When I deploy this the machines finish with success showing this exists, but does not uninstall Office 2010.
    running the command line manually mapped to this location on a machine uninstalls office 2010 without issue. 
    Lync 2010 uninstall:
    Lync is an exe so I am using the LyncSetup.exe /silent /uninstall.  The application is in the supersedence tab for Office 365 2013. This never installs.  If I create a softare distribution and deploy it on its own it uninstalls without issue. 
    We are going to use Lync 2013 with our office 365 2013 installation so we need to uninstall this.  The detection method for lync is file system folder and the Microsoft lync folder for detection.
    MS Office 15 (Office 365) was created with the click to run tool.  I can install this with the application I created using the appv5 package created with the click to run tool.  The issue is we need Office 2010 and Lync 2010 uninstalled first. 
    Having both versions of Office installed in test has caused issues where Office 15 365 will not list in add and remove programs and cannot be uninstalled even with the fix it article to remove office 2013. 
    I have looked at many articles and so far it is not working for us.  Any help appreciated to get us to the cloud.
    Thanks,
    Brit

    The applications I have for uninstall of office 2010 and Lync 2010 for some reason do not uninstall. Manually testing the command lines they do.  The detection method seems to be hanging things up.  On the lync uninstall detection method I have
    the setting type of file system, type folder, path c:\program files\ folder name Microsoft Lync.
    I highly recommend using something other than a file/folder "exists" detection method. Installers are constantly leaving things behind due to environmental inconsistencies. It may leave files/folders behind with a schedule to delete files on next reboot.
    These things are unpredictable and very hard to use. I just use the "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall" Registry location. There you can actually key off the "Product Version" DWORD as well which gives you an even more accurate method
    to determine if the application you are trying to deploy (or expect to exist) is truly there. This, of course, being if you are not using an MSI. If you have MSI technology ALWAYS use the product code unless the person writing the MSI chooses to use the same
    product code for every version release of their product. In which case, Use the registry method.
    As far as getting the supersedence and everything working. You need to start from the basics. Create Applications for all of the apps you want to remove. Make sure they install and uninstall properly (seems like overkill but it isn't that hard). Once you
    have working install/uninstall applications then you can easily apply supersedence to your new applications with a setting of Uninstall on the superseded apps you should have no problem getting rid of them. I have done this for numerous things.
    For example, I did this with Cisco Jabber to replace older versions of jabber, older versions of cisco unified personal communicator and lync and OSC. All of these replaced versions had to have an Application but once it was in it took two seconds to apply
    all the supersedence rules and now I know when I push that software out no matter version is running on any machine it will pull all the old apps off and put the new one on.
    Dustin Estes - MCP | www.dustinestes.com

Maybe you are looking for