Officejet 7210 All in one Part

Could someone please help me name this part I need to get a replacement for two printers. It might be called a "slider" but I want to make sure before ordering the right part. This piece sits on the bar and pushes the carriage right to left.
Sorry the pictures are not the best quality.
This is what I have and its broken supposed to be one
Heres what it should look like
This is what it should look like attached
Fits behind the carriage
This is when its on the sliding bar

Hi adamjy12345,
There are a couple of diagrams in the manual that may help...
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?product=391153&lc=en&cc=ie&dlc=en&lang=en&cc=ie
Kind Regards
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Similar Messages

Officejet 7210 all-in-one

I've had this printer for about 5 years, running on an XP system. I recently purchased a new computer running on Windows 7. Windows 7 found drivers to run the printer and it is up and going fine. However, I've lost the ability to scan with the printer. I have the old CD (version 4.7.1) but it's for XP. I can install that software to run my scans on the scanner part of the printer? If not, what are my other options?
This question was solved.
View Solution.

Hey there scott77, Welcome to the Forums!
I noticed you purchased a new computer now running Windows 7 and you are looking for the Full Feature Driver and Software so you can have the scanning capabilities back as you did with your XP.
The great news is, you don't need the disk as there is a download available for you to use to install the software.
Click here to get started and just click Download: HP Officejet 7210 All-in-One Printer
I really hope this helps you! Feel free to write me back on your progress!
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

Fax issue with HP OfficeJet 7210 All-in-one

Hi everyone,
I've got an issue with my HP OfficeJet 7210 All-in-one printer/fax (USB connection)
I'm under Mac OS X 10.5 (Leopard).
When I was under Tiger, my printer/fax worked properly.
After the upgrade to Leopard, the printer/fax was still installed (HP 7210 was displayed as installed in the printer list of the System Preferences).
The printer works fine but the fax doesn't ! An error consistenly occurs when I try to send a fax.
Thus, I decided to uninstall every HP components from my Mac. Then I proceeded a fresh install of the CD software/driver I received with my printer/fax.
During the installation, I get an error : "HP AIO TRAP has quit". I went further and continue the installation till the end by ignoring the problem.
The printer is still working fine but I'm unable to install my fax in the System Preferences because the fax simply doesn't appear either on the "Fax" tab or on the "More printer" tab.
Only an unuseful "Bluetooth" fax appear, I can install it but it's impossible to send a fax with it : http://users.cybernet.be/ptsalos/hp-leo1.png
In the "More printer" tab I got this : http://users.cybernet.be/ptsalos/hp-leo2.png ... It seems that no fax are detected (no fax are displayed in "HP AiO Télécopie" and the "Add" button is gray).
I hope you could help me !
PS: the fax works properly under Bootcamp with Windows XP PRO SP2
Thank you very much.
Message was edited by: phl00

OK, so enough software is available (or will so been available) for me to start posting these types of workarounds (and getting more of you up and running). And remember, what I am about to tell you is NOT supported by HP, so if you run into problems doing this do NOT call customer support. I am posting this stuff here to try to help out the community. I will stop posting if this gets abused (even once).
If you have an HP OfficeJet 7310 or 7210 printer, go to HP.com/support, tell it you have a 7410, and download the installer (follow my instructions on the [Beta Announcement|http://discussions.apple.com/thread.jspa?threadID=1252889&tstart=0 ] thread if you need more details.
Now follow these instructions:
Step 1: Run the installer, and follow the onscreen prompts.
Step 2: When the screen comes up to select your printer, check the box my printer isn't listed and continue.
Step 3: On the next screen select the OfficeJet 7400 Series and continue.
Step 4: Select the type of connectivity to your device.
Step 5: Install the software (this may take several minutes).
Step 6: When you get to the Setup Assistant, skip it. Make sure you de-select the two checkboxes before you continue otherwise it will remind you every time you log in.
Step 7: Go into the Print & Fax System Preference and manually add your print queue.
Step 8: Go into the Print & Fax System Preference and manually add your fax queue.
Step 9: Start using your device.
Congratulations, you now should have a fully functioning device under Leopard. So what won't work with this work around:
1) The documentation on your device will be wrong.
2) If you did not previously set up a station ID for the fax, one will not be set.
3) Device Manager will not know anything about your device so the functionality there will be pretty useless (most stuff can be done through other means though). However if you already have a Tiger install, even this should (theoretically work).
4) Good question, if you run into any other issues post them here, I may have forgotten something.
WARNING! WARNING! WARNING!
Please install the final drivers when they come out, and preferable the beta drivers too for your device too! Just because things are working for you does not mean that this configuration is supported (its not) or that there aren't any known problems (there may be, we certainly don't test it) so please take caution and update when possible.
Just trying to help.
Andrew

Need generic print driver for Officejet 7210 all-in-one on Windows 8.1

Updated my Windows 8 to Windows 8.1, which removed my print driver for an Officejet 7210 all-in-one. Attempted to reinstall. Error that file not found. Followed detailed process to a tee (deleted temp files, removed startup programs, everything). Driver doesn't work but printer does with other computers. Printer is no longer supported and no help (but is in great working condition).
I'm looking for a generic driver that would work with my printer and Windows 8.1. I really appreciate any help...
This question was solved.
View Solution.

Hi LChristofaro,
I have researched your error message and the Msiexec.exe error and it is an issue with windows installer. I recommend restarting your windows installer.
To do this:
1. Run "Services.msc" (without the quotation marks).
2. Double-click "Windows Installer" in the Services list.
3. Click Stop and click OK.
4. Click Start and click OK.
Restart you computer and try the install again.
Let me know if this helped.
Thank you,
I worked on behalf of HP.

CAnnot get HP Officejet 7210 All-in-One to install

Have attempted to install numerous ways the HP Officejet All-in-One 7210, using both HP sent disc for WIN7, Download from HP and Download from Microsoft. Have even done a regedit of all 'HP' and fresh restart. This printer worked fine under WIN XP Pro but now with a fresh install of WIN7. It runs through the install but won't print. In checking the properties of the Printer it shows model #unavailable, scanner unavailable and under driver shows nothing. Can someone help?
This question was solved.
View Solution.

How is the printer connected - USB or wired LAN? I would suggest you look in the CD for a util\ccc directory. In this directory should be a series of batch files, uninstall_L1.bat through uninstall_L4.bat. Disconnect the printer, then run the uninstall_L1, then uninstall_L2 and uninstall_L3 files. Next run the install program and do not connect the printer until prompted to by the installer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet 7210 all-in-one duplex problem

Since connecting Officejet 7210 to laptop running Vista Business, the 2-sided printing accessory with rear tray is not recognised. I have been using the Deskjet 990C driver for 2-sided printing but it does not recognise the rear tray. Am unable to print photos using the rear tray, & when I try to load the 4x6 photo paper into main tray, the image will only print from the centre position of an A4 page, not the location when the tray is adjusted for the 4x6 (10cm x 15cm) stock. How can I enable the rear tray to feed the photo stock.
Is there an updated driver for the 7210 that supports the duplexer with rear tray or what other workaround can you recommend?
This question was solved.
View Solution.

Since the duplexer and rear tray were optional on the Officejet 7210 the driver will default to them being "not installed". Go to the printers folder, right click on the 7210, Properties, Device settings, Installable Options and set the Duplex Unit and the Rear Tray to installed, Apply, OK.
Once this is done the rear tray should be accessible and you can try duplex printing. You will probably need a patch to correct the back side printing upside down when duplexing, this is available as described here.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

After printing successfully, my officejet 7210 all-in-one stopped printing and gives the message "re

No problem with printer until today. Suddenly error message appears. "Remove and check right cartridge." Of course, I did that, several times, but with no effect. No ideas?

Try the troubleshooting steps in this page. If the x-bais spring is dislodged as sown in Figure 11 then check the flex circuitry. If the flex is not damaged you may be able to use eopxy to put the x-bias spring back in place. If the flex is damaged as in (2) below you will need to repair or replace the printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

7210 All-in-one with Windows 7 Draft print extremely slow

I have an Officejet 7210 All-in-One printer and a computer with Windows 7 32bit installed. I downloaded and installed the print driver for windows 7. Printing was working fine including fast printing. I changed the default color preference from "high quality" to "grayscale black only" and now my draft printing is extremely slow.
Any assistance would be greatly appreciated.
jsin007

Hi
The 7210 was always a good workhorse printer.
It may be that your slow printing issue is related to installing the Windows 7 driver. When the Windows 7 print driver was installed it may be that the Windows 7 installer did not remove the older print driver correctly. This may cause conflict issues which could possibly cause the slow printing you are experiencing.
I do have a link to a troubleshooting page for a printer not printing after the installation of the Windows 7 driver. It involves downloading a print driver removal utility & then re-installing the Windows 7 driver.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02002372&tmp_task=solveCategory&lc=en&dlc=en&cc...
Hopefully this will solve your issue.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Installation problems Officejet 5610 All in One on Windows 8.1 64 bit

I have a HP Officejet 5610 All-in-One printer that I have had for a few years. It has worked well on the old computer but the computer died. I purchased a new Dell Laptop with the Windows 8.1 64 bit operating system. The printer works fine but the scanner won't work since there is no software in the computer. I went to the HP Support website and tried to down;oad the drivers/software. The download failed 6 times. i finally tried anothe computer and after 4 failures. I was able to down load all 402MB of software. I saved it to a portable USD drive and returned to the Dell. I started the install and got to the begin installation screen. Unfortunately, right after it finished extracting the files. I got a pop up dialog box with the error message "System cannot find file specified". I went to HP Support and the website said to search the Windows file and remane the file extensions on all hpoins*.dat and hpwins*.dat files to .old file extensions. Unfortunately, there aren't any and they don't have any other suggestions.
Does anyone have any ideas?

Hi d-hammer,
Welcome to the HP forums!
I'm sorry to hear you've been having issues getting your Officejet 5610 installed on your new Windoes 8.1 computer but I'm hoping I can help you out
On your new Win 8.1 computer do you have an anti-virus program? Anything like McAffee, Norton, BitDefender, Avast, or anything like that? If you do, it's likely that the firewall within that anti-virus program is blocking part of the install. If you have any anti-virus on your computer you'll need to disable the firewall and the real time scanning within before you try to run the installation again. If you're not sure how, contact the anti-virus company and they should be able to let you know how to do those steps.
Let me know how that goes for your and we will go from there!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Hp officejet 6500 all in one won't print in black

I cleaned the printhead to eliminate clogs which had worked in past. Did not work this time.
Purchased and installed a new printhead and ran a report which showed the black ink working.
Ink levels in all cartridges, however, were low. Purchased new 920 XL cartridges and installed. Ran an alignment and said it failed.
Ran the cleaning of the printheads and then ran a report and still no black ink.
Ran status and quality reports and now the black will NOT print (when it was printing the day before with the new printhead).
HELP! Why will the black suddenly not print. The printhead is new and the hp ink catridges are all new.

Hi, Jamison ~
I had tried many of the things you noted (from the link) and at one point got an acceptable quality report (that included black) after replacing the printhead so it was particularly frustrating to then go back to no black after loading ink cartridges. I had done the partial reset too (as I had seen that recommendation on a forum) waiting hours for it to sort itself out wasn't acceptable when I needed to print something.
I have to admit that I finally threw in the towel and just got another printer. I need to be able to have something reliable and tire of always sorting through how to unclog; clean; reset; order parts; get new cartridges; run through mutiple cleaning printhead cycles. The lack of black print just seems to happen too often.
Thank you, though! I truly appreciate you taking the time to write a thorough response for me.
JFW
Jamieson wrote:
Hi @jfw , and welcome to the HP Forums!
I see you are experiencing print issues. I would like to try and help.
It appears you have covered much of the troubleshooting already.
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fixing Print Quality Problems for the HP Officejet 6500 All-in-One Printer Series.
If that doesn't resolve the issue, the best recommendation I could make would be to contact HP directly. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
Thank you for posting on the HP Forums.

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Installation Officejet 4335 all-in-one

Since my laptop crashed (Acer Aspire - Vista) I have bought a new one (hp 250 G3 – windows 7). And I therefore want to reinstall my Officejet 4335 all-in-one. I have reinstalled this printer many times on my old laptop using AIO_CDB_Full_Non-Network_enu_NB which I downloaded from your support site and have never had any problems with the installation.
This time the installation doesn’t work... chronicle of events
Attached USB cable to printer/laptop
Got the usual “device is ready for use” notification
Started installation software
Got error message ...
USB Drivers etc.
Checked to see if Printer visible to laptop – it is !!!
Just for devilment, tried to print something – it worked !!!
But still cannot continue installation because of USB error message
Tried cable on all three USB ports – installation software repeats error message
All USB ports work with various devices (including the printer cable to the all in one)
I need to complete the installation as I need the other functions – particularly scanning.
All help appreciated.
Regards
David M. Gullever

Hello there! Welcome to the forums @Dragonfish
I read your post about the issue you're having with installing your Officejet 4335 on your Windows 7 system.
There is most likely issues installing the printer, as it does not have a driver available for Windows 7, which also means there is no scanning software available either.
Check out the drivers available here: HP Officejet 4355 All-in-One Printer Drivers
The best bet you have would be to try the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the printing issue. If printing still does not work, I would suggest a printer upgrade.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

The Photosmart 5510 is AirPrint capable. You can find that information linked below. There may be something in the network that is preventing communication. To use AirPrint your router needs to support Bonjour services. Run the download below. It will let you test Bonjour services from your Windows PC. If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour. Let me know what the app finds. If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
Bonjour Print Services for Windows v2.0.2
HP Web Connected Printers and Supported Cloud Services
I am a printer tech for HP.

HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
+Hello Charles,+
+Thank you for contacting HP Total Care.+
+I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
+I appreciate for the opportunity to assist you.+
+*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
+I will be more than happy to assist you when you change the OS.+
+For information on keeping your HP and Compaq products up and running, please visit our Web site+
at:
+http://www.hp.com/go/totalcare+
Sincerely,
Sentinaro
+HP Total Care+
+Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
+For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
+HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

Help! I've spent hours researching this and can't find a solution...
I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
Very Respectfully,
Bobby G.

Officejet 7210 All in one Part

Similar Messages

Maybe you are looking for