OfficeJet 8000 not showing up in terminal services connections

I have recently been struggling with officejet 8000 creation/deletion on 2k3 terminal services. Looking through the event log, it shows that these printers are created, and then immediately deleted... I was able to map one of the printers to the server, but that's because it's on a local network. The remote users won't have that capability. The machines in question are windows 7.
Thanks

You would actually reset your password from the recovery partition. Reboot using cmd-R, go to the Terminal in the Utilities menu, type resetpassword and proceed.
Matt

Similar Messages

New iMovie app for iPhone 4 not showing up in Location Services (Settings)

iMovie app for iPhone 4 not showing up in Location Services (Settings). It apprently needs to be both viaible and turned on in Settings/General/Location Services in order for the app to discover previously taken video (Location Services correctly recognizes other apps of mine that utilize location-aware services).
I think the following is related to and caused by this problem above: iMovie App for iPhone 4 is not recognizing video clips I have made, whether they're in Photo Album, or iPhone 4 native movies that have been throughout this process: [sync with iPhoto on Mac > save to to iPhoto album > sync album to iPhone 4].

Just had this same problem. The solution is to turn Location Services on before launching iPhone iMovie.
Yes, iMovie needing GPS coordinates is crazy, as is the error message that doesn't correctly explain the problem. Looks like a bit of a rush job.

Essbase server is not showing in the windows services (11.1.2.1)

Hi All,
Essbase server is not showing in the windows services 11.1.2.1. when I checked the processes from task manager it is there.
Regards,

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

HT1386 new iPhone 5C not showing up in iTunes when connected by USB

new iPhone 5C not showing up in iTunes when connected by USB

Hey there krpeterson93,
It sounds like your new phone is not appearing in iTunes on your computer. Depending on the version of your OS, the instructions are a different.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thank you for using Apple Support Communities.
Regards,
Sterling

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

:-) the problem is solved. Thanks to a great typ in one of the other discussions with alt+cmd+S iTunes looks again like something I recognize. After removing the iPod from iMac and also from the connecting "holder", turning it on ad off, rebooting the iMac, maggic happens and the iPod now shows in iTunes and everything works just fine.

Field explorer does not open on my terminal services profile

Dear Sirs,
For some reason I am unable to open my field explorer in any crystal report on my terminal services profile. I have checked with other profiles and the problem does not exist. The problem is specific to my profile. I can also create new reports and access fields however if I use the filed explorer button I cannot access fields, parameters or formulas from there. Problem just started this morning. We have been using crystal reports X1 for last 12 months. Would it be a terminal server issue?
I would appreciate whatever help you can give me.
Regards,
Philip Brady
Finance Director
National Electrical Wholesalers (Irl) Ltd

Hi Philip
This can be an issue with the terminal server that you are using. Please refer to the Crystal Reports XI supported platforms guide if the server that you are using is supported or not.
You can download the guide from the below link:
[download CR XI supported platforms guide|http://www.2shared.com/file/4065156/f2ef25e1/cr_xi_supported_platforms.html]
Hope this helps!!
Regards
Sourashree

Main Address in HRMS not showing in Employee Self Service

Hi
The Main Address (primary address) that has been captured in core HR is not pulling through to the employees personal information screen in Employee Self Service. Any ideas as to what the problem could be?
Thanks in advance

According to MetaLink note 278417.1 the cause is that the Addresses were not properly loaded, probably missing out the "Country" field. Addresses without Country field will not show up in SSHR.
"Fix
In the PER_ADDRESSES table if 2 records are compared, i.e one entered for a new address and one for the record loaded thru APIs, then it will be seen that the Country is missing in the record that came thru API.
Customers will need to correct their data in order for the Addresses to appear in SSHR.
Customers can write an update script to update the Country (We do not support this) or update the Country field using the APIs or reload their addresses using API's."

USB P1505 not printing properly via Terminal Services

I have problem printing to these printers via terminal services. Other pinters print fine but these guys either print intermittently or not at all. I have installed the latest drivers on the TS and the clients. Sometimes sessions will be created and jobs would just remain in the queue or take a very long time to print. They are the USB and not the N models.
Any ideas?
Win2k3 server
Win2k Pro/WinXP clients

The router is Zylex, the printer is an hp deskjet 3512. I first used the disk that came with the printer that did not work, so I uninstalled and downloaded off of this site thinking maybe it would be a more updated version. That did not work either. I have done all of the other troubleshooting that I have found on this site through other forums I unplugged the router, checked countless times to make sure the password and network were correct.
My main issue at this point in time is that it will not print properly at all. I dont know if I need to download something to make it work. I am a full time student, work full time, and have children. I need my printer to work when I hook it up to usb, I dont have time to for all of these problems that I have had with this printer. I am actually in need of something printed at this very moment and my library is closed which is where I have had to go and pay .25 a page to print anything. So Please help!!!!

SP2013 Workflow Service Application is not showing up only WF Service App proxy but the WF is working...

I configured Sharepoint Workflow Manager 1.0 in Sharepoint 2013 App Server running under Windows 2012 R2. The Workflow manager is working properly - I tested using Sharepoint Designer and Sharepiont Workflow 2013 is listed. But under Service Applications,
only Workflow Service Application Proxy shows up NO Workflow Service Application.
I followed the troubleshooting steps on this - I have re-registered WF many times but still only proxy is coming up.
http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
I also run IPConfig /FlushDNS, rebooted App and WFE servers.
Any reason why WF Service Application is not showing up? Any resolution to have WF Service App show up?

Hi John,
I recommend to click Configuration Wizards in the Quick Launch of Central Administration site and then click Launch the Farm Configuration Wizard.
And then make sure that the Workflow Service Application is selected and then click Next. (You can uncheck the other service applications if you do not need them)
After that, the Workflow Service Application will show up.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Attachment are not showing in learner self service for classes

same OLM:Attachments Linked To Classes Are Not Visible By Learner Self-Service Responsibility [ID 375830.1]
pplies to:
Oracle Learning Management - Version: 11.5.10.2 to 11.5.10.2 - Release: 11.5 to 11.5
Information in this document applies to any platform.
***Checked for relevance on 22-DEC-2010***
Symptoms
When a Learner enrolls in Training, they cannot view attachments the administrator had placed with
the class.
EXPECTED BEHAVIOR
Expect the attachments placed on a class to be viewable by all learners enrolling in that class
STEPS
The issue can be reproduced at will with the following steps:
1. Learning Administrator creates a class and adds an attachment
2. Learner enrolls in the class but cannot view the attachments the admin placed there.
BUSINESS IMPACT
The issue has the following business impact:
Due to this issue, Learners cannot view attachments the administrator attached to a given class
Please help James

Maybe I am not explaining this right.
You just mention my exact steps
Course/offering/class/update/ attachment
However when I try to navigate back to the catalog, I get an error in Mozilla "The changes you made to this page have not been saved. If you continue, the changes will be discarded. Do you wish to continue."
In IE, "Problem: not able to see how to save the changes after publishing a document to catalog"
I still have to republish what I already published. The process sounds like there is bug or miss leading. Why would I have to save a document that I just attached and/or why should I have to republish a document that I already published.
I just figured that as long as I am in update then I will continue to receive errors and republishing. Everything is work great and now I will be closing this message. Thanks for you help. Great forum.
Edited by: user6693833 on Sep 12, 2012 3:06 PM

Viewing "This PC" Devices and Drives when connected through a Terminal Services connection

Greetings, [long-time listener, first time caller]
I am a service technician who remotely logs into customer servers using terminal services. I am accessing systems around the globe. I regularly need to move files from my local system to the customer system, so I always connect with my local
(client) drives.
A feature of Windows Server 2012 R2 drives me insane. I use the good old "[Windows] + e" Shortcut to bring up the file explorer. It displays "This PC". It displays both the server's local volumes and \\tsclient\
volumes by name and also waits to display the information until it can get volume information from the terminal service drives.
The end result is that:
1) The Devices and Drives display is delayed by 5 to 10 seconds while it gets volume data for the network drives and
2) The drives I care about, the customer's local drives, are displayed AFTER the The Terminal Services drives AND Server-side removable storage.
Am I missing a way to display the networked devices separately? This is extremely annoying. It wastes my time and displays items illogically.
I know there are third party apps that can help (OldNewExplorer). But they are not an option for me.
[Modified on 2014.11.07] I have attached a screenshot of the way it looks in Windows Server 2012.
Thank you

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that local drive redirection is not working. For this please check whether drive redirection is enabled on server side and whether any group policy is not set to disallow the client drive redirection. Check on domain controller
that the 'Default Domain policy" - 'Do not allow drive redirection' was disabled.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

HTTP and terminal services connection intermittently for CSS 11506

I am configuring a client/server CSS configuration. I am facing an intermittent of http connection. The browser will require to refresh 3 times before the web page is seen. I am also facing the connection to the real server behind the CSS using the terminal services in Windows server 2003. I am using ML330 to connect to the real server through their VIP address. The connection is sometime successful but most of the time is not. I had attach the network diagram and the config for reference. Please advice!

This is the kind of thing that you need a sniffer trace on both sides of the CSS to determine what the problem is.

My iPhone and iPod do not show up on iTunes when connected to my mac.

iPhone and iPod do not show up when connected to iTunes.

See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

Ipod not showing up in itunes when connected

I get a message that says the device has been detected but can't be identified and to reinstall itunes. I did that and it is still not showing up. I have reset it and tried most suggestions that I have found. Short of going to the Apple store, is there any other way to get it to show up.
Thanks

Did you try the suggestions in this Apple support document?
iPod nano: Error message saying that iPod 'could not be identified properly'
B-rock

OfficeJet 8000 not showing up in terminal services connections

Similar Messages

Maybe you are looking for