Officejet 8600 locked by system administrator

Hello, I am trying to set up my wireless 8600 on my network, but find that even the factory defaults were locked by the system administrator. The administrator is my ex... Can someone tell me how to unlock it so I can use the wizard to get it on my network? Thank you!

Hello pedalva,
Welcome to the HP Support Forums!
I understand that you are looking to remove the admin blocks on your Officejet Pro 8600, I would like to see if I can help. Please check your PM's here on the Forums.
If you are not sure how to check them, it's the envelope icon to the right of Log Out.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Error Message "feature has been locked by system administrator"

I recently moved and tried to reconnect my priniter to the new wireless network but I get an error message saying, "this feature has been locked by your system administrator or person who the person who setup the printer." When I set up the priniter it did not ask me for a password and I have no idea how to unclock the wireless wizard. HELP!

You might have had a nice neighbor who did that for you.
What printer do you have?
You could try restoring the printer to factory. That feature is in the settings menu on most printers.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

System Lock error : Inform System administrator

Dear all,
One of the SAP user got this (System Lock error : Inform System administrator) error , while doing posting .
Kindly advise

Hi,
Check for any lock entries in the TA SM12 and then have a look at the note 13907 System error in the block handler, overflow lock table.
Hope this helps.
_Varadhu...

System Lock error:Inform your system administrator

dears,
i receive this error message (System Lock error:Inform your system administrator) while doing Sales order or , & MIGO. can you please help out

Hi,
This is not an Unicode issue, but anyway check this note:
13907 - System error in the block handler, overflow lock table.
Marco

FBRA: System lock error inform system administrator

While trying to reset a document transaction code FBRA, am getting the error message "System lock error inform your system administrator" when I hit the save button.
how do i solve this?
You help is much obliged.
ogutu

Dear Ogutu,
the F5288 error message (System lock error: inform system Administrator)
appears to be caused by a table overflow as it takes place with a very
large document ie. xxxx line items. As all the items must be locked when
transaction FBRA is performed, there is not enough space in the lock
table.
Please extend the profile-parameter "enque/table_size", as per note
13907, 487347 which I have attached, in order to overcome this problem.
You have to change a parameter.
Then please remember to restart the server after extend the
profile-parameter "enque/table_size", as per note note 13907.
If you already did it and nothing changed, please increase the parameter
again.
Please be aware that You have also to implement the solution described
in note 487347. There is not only correction code, there is also some
steps to do in order to solve the incident (manual changes have to be
done in SE93):
1. Implement the corrections. The corrections are not contained in the
     SAP Standard System. See Note 170183.
2. Use Transaction SE93 to create the parameter transaction FBRA_LOAC
     referring to transaction FBRA. In addition to the descriptive text
     'Reset Cleared Items with Account Block', you have to enter the
     value FBRA in the 'Transaction' field.
3. In problematic cases, use transaction FBRA_LOAC to reset cleared
     items. The transaction is not designed to replace the existing
     transaction FBRA. The transaction only provides the option to reset
     cleared items in case of an overflow of the lock table.
I hope this helps.
Mauri

Does the Officejet 8600 Pro Premium N911n printer perform auto tray selection?

I have an Officejet 8600 Pro Pemium N911n printer, CN577A with two trays. My Operating Sysem is Win8,64bit,there are no error messages, no system changes.
The HP Officejet Pro 8600 e-All-in One series User Guide states that By default, the printer draws media from Tray1.If Tray1 is empty, the printer draws media from Tray2(if it is installed and loaded with media. I have Tray lock disabled ,Tay1 the default Tray and Automatic Tray Selection enabled.Prior to making these selections,I contacted HP support via email to report that this option was not working. I received a response that there is no method that will automatically select a tray when one tray is empty. The User 's manual states otherwise..This option might not work but it is part of this series of printers. I have both trays loaded and I will determine if it works after Tray1 is empty. Does anyone have one of these printers and the auto Tray function works? Thanks.
This question was solved.
View Solution.

Hello wardell1,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Unable to install HP Officejet 8600 Pro Plus Driver on MacOS Maverick

Hi,
I have not been able to install HP printer driver on my Mac.
printer model: HP Officejet 8600 Pro plus
operating system: MacOS Maverick 10.9.3
I have tried all the advices found in the forum including deleting all the old HP files etc and still gets the following error message.
Regards

Hi HugeLau,
I would like to help you successfully install your printer software onto your Mac running mavericks. I can't say for sure what has caused this issue, but I am sure the steps below will help you to resolve the issue;
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Remove Apple HP Update
From the computer desktop, double-click the Macintosh HD  icon.
Double-click the Library folder.
Double-click the Printers folder.
Right-click the HP folder, and then select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Double-click the PPDs  folder.
Double-click the Contents  folder.
Double-click the Resources  folder.
Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Click the Trash icon on the taskbar, click the Empty  button, and then click OK to empty the trash.
NOTEBy clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.
On the upper-left corner of the computer desktop, click the Apple menu icon, and then click System Preferences on the drop-down menu.
Double-click Print & Scan.
In the Printers list, click your HP printer, and then click the Minus button to delete it.
Restart the computer and now you have a fresh start.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. > HP-Inkjet-SW-OSX-Mavericks_v12.34.37.dmg
When you add the printer, please ensure you are using the HP driver, not the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if this resolves the issue. thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet 8600 fax issues

I have an 8600 printer with fax capability - however - when I've tried to fax, I get a message saying I need to 'load' the software from the CD. I would - if I could find the CD. Any way to resolve this issue via a download some other way? Please help!

Hi sharkman57,
Welcome to the HP Forums!
I understand that you are having fax issues with your HP Officejet 8600, and I am happy to help you with these issues!
Please see the following:
Cannot Send or Receive Faxes.
HP Officejet Pro 8600 e-All-in-One Printer - N911a Drivers (This is the Software for your printer).
To find the exact version of your Operating System, visit this link. Whatsmyos.
Hope this helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet 8600 driver won't install on a 64-bit Server 2008 R2

Hello, this has been discussed before but it looks like the links with resolutions are dead. A client has an Officejet 8600 all-in-one printer and wants to use the 2008 R2 64-bit server as a desktop with the printer directly attached. One of the proposed solutions was to install Desktop Expeirence, which I did, but still no go. I get a message that the drivers are only for Win XP, 2003, and Vista - the current system is not compatible. The problem is, the drivers are downloaded from the HP site when 2008 R2 64-bit is specified. Are there any workarounds, or should I just consider this printer uninstallable? Thanks.

Hi Stephen00101010 , sorry to hear that you are unable to get the printer installed. I do apologize for the inconvenience, however the operating system that you are using is not supported with the use of this printer.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Im trying to uninstall itunes because the newest version wont download. But when i go to uninstall, it says "The system administrator has set policies to prevent this uninstallation" Whats can i do to uninstall

Im trying to uninstall itunes because the newest version wont download. But when i go to uninstall, it says "The system administrator has set policies to prevent this uninstallation" Whats can i do to uninstall

Windows right?
Likely your not the administor any more, the botnet is.
Check on this site really quick if your part of a botnet
http://botnetchecker.com/
All clear? Hopefully. Backup your files to a external drive, cd or dvd, USB keye etc off your computer.
Run the sfx file on this site and it will burn to a cd.
http://www.avira.com/en/support-download-avira-antivir-rescue-system
Next hit your BIO's key and set the cd to boot first, run the scanner and see what it pops up.
If your all clear then create another Admin, transfer your files over from the first Admin.
See if that works, eventually when your totally over to the new Admin, delete the old one.
If you can't create a new Admin, find out who locked your machine down, like your parents or it's a school computer?
Likely installed spyware or "nanyware" to watch you.
Hope that works.

Officejet 8600 Plus "scanner reported error" Mac scanning

I recently purchased the Officejet 8600 Plus and have run into problems scanning. When scanning using the ADF, I frequently get a message saying, "Scanner reported an error. The scan was not completed because the operation was cancelled while scanning was in progress." The only way to escape from this situation is to turn off the OJ, power it back on, and then try scanning again. I haven't seen the issue using the flatbed, but I've used the ADF far more than the flatbed. This happens both when connected via wifi and USB, so it's not a networking problem. I have tried scanning via Apple's Image Capture as well as HP Scan and I get the error using both. I have all the latest software and firmware for both the Officejet and my Mac. I have tried uninstalling and reinstalling the HP software, to no avail. This situation is tremendously frustrating as one of the main reasons I purchased this product was the wifi scanning feature. Without a solution to this problem I will consider this product to be defective and will return it. So, any suggestions as to how to alleviate the problem? Thanks. System info: Macbook Pro 17" (early 2011)OS X 10.8.5

I have an HP MF127fw connected to Mac computers and am experiencing exactly the same problem. Scans from the ADF always fail with that same "scan canceled" message. Preview, Image Capture, or Scan from Print & Scan all receive the same error. USB or WiFi connections make no difference. What is wrong with the HP connection? Here it is 2015 and there have been over 200 viewers of the original posting regarding the inability to scan. Hasn't anyone found a way to overcome this problem?

Hp officejet 8600 can't print two sided from adobe reader in Mac 10.8.4

HP officejet 8600
Mac notebook osx 10.8.4
Can't print 2 sided from pdf in adobe reader.
Print command from file dropdown doesn't open
Print expanded dialog box at bottom of pdf in adobe doesn't show a 2 sided option
Thanks
vso

Hi,
Please follow the steps below in order to automatically print two-sided print jobs:
1. Verify the duplex-printing accessory has been installed properly. To verify this open the System Preferences and go to Print & Fax. Open the print queue of your printer. Click on Printer Setup and from the tab menu choose Driver. Verify the box next to HP Two-sided Printing Accessory (Duplexer) is checked.
2. On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click Show details to see all available settings.
Note: If you use Adobe Reader, click teh button to launc the system print dialog.
3. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
4. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
5. Select Layout from the drop-down menu.
6. Set the Two-Sided option as Long-Edge binding (Portrait), or Long-Edge binding (landscape).
You may save the settings for future use by clicking Presets > Save Current Settings as Preset... Any used preset will remain default till another preset will be used.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am administrator.

when intalling itunes i get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am the dministrator.

Windows right?
Likely your not the administor any more, the botnet is.
Check on this site really quick if your part of a botnet
http://botnetchecker.com/
All clear? Hopefully. Backup your files to a external drive, cd or dvd, USB keye etc off your computer.
Run the sfx file on this site and it will burn to a cd.
http://www.avira.com/en/support-download-avira-antivir-rescue-system
Next hit your BIO's key and set the cd to boot first, run the scanner and see what it pops up.
If your all clear then create another Admin, transfer your files over from the first Admin.
See if that works, eventually when your totally over to the new Admin, delete the old one.
If you can't create a new Admin, find out who locked your machine down, like your parents or it's a school computer?
Likely installed spyware or "nanyware" to watch you.
Hope that works.

Officejet 8600 won't pull from Tray 2 after Mac OS update

I recently installed the Mac OSX 10.10 Yosemite update. Immediately after, my HP Officejet 8600 all-in-one would not pull from the optional second tray. There is a 10/22/14 driver update that says it is for OSSX 10.10, but does not fix the problem. After trying every single solution I could think of, including deleting all printers from my system, repairing permissions, installing the new driver, uninstalling and re-installing the second tray, among other things, nothing worked.
The problem appears to be that every time I print, it unselects the "Optional Paper Tray Input" setting from the OS settings. One work around is to go in and make sure that box is checked each time I print, which is a pain and only works about 80% of the time.
The printer is an office printer and Tray 1 is envelopes. While I could put regular paper in Tray 1, that would be unfair to the other people in the office who use the printer and would need to manually do an envelope each time.
I called HP support and they basically told me that it was a bug that was not currently fixed. They said they would e-mail me when a new updated driver is released (I'll be holding my breath for that). I'm posting this here hoping that admins notice it and get moving on that update so that I can get my printer back.

I have the same problem as everyone else in this thread. I've been on another thread, here: http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-8600-won-t-print-from-tray-2-in-upda... .
I have spent hours of time on the phone and in chat sessions with HP, then Apple, and then HP again. The HP reps made it clear that the problem is in the HP update that was issued to work with OS 10.10, and that a fix would be coming soon. That was over a month ago, and still nothing.
Since HP reps seem to monitor this thread, could someone from HP inform us as to when there will be a solution? The last HP software update for this printer was October 22nd, so you've had plenty of time to fix this problem, which HP has repeatedly promised to do, but failed to do.

When I click on the firefox icon, I get the message "FAiled to read the configuration file. Please contract your system administrator."

I was using my laptop on a hotel wireless the past couple of days. I returned home and put it back on the docking station. However, I do remember getting this same error message while I was on the hotel wireless. Since IE worked, I didn't worry about it, thinking it had something to do with the hotel wireless. However, now I'm home and it still won't work. I've uninstalled and reinstalled firefox a couple of times - still the same error message. I don't have a "system administrator" to contact - that would be me!

Are you using a file mozilla.cfg to lock or initialize prefs?
See:
*http://kb.mozillazine.org/Locking_preferences

Officejet 8600 locked by system administrator

Similar Messages

Maybe you are looking for