OFT for web : does not record in popup windows

Hello (again)
I have a question :
I tried openscript to test my application (oADF based) and although it was got popup windows, all is working fine and recording.
Now with OFT for web, popup windows are not working (in recording mode, in popup window, buttons are not working) and not recorded !
Is there something in OFT for web parameters that I should change to have same behavior than openscript ?
thank you
Michael.

Hi,
OFT comes with an Embedded browser so while record all navigations must be with in that browser only. You can try OFT Demo application see if you have any external pop ups in there as far as I have seen that demo application does not have any pop ups. Any external windows will not be recorded in OFT as far as I know. You can use Open script to do recordings in the external window.
IE popups can be handled in OFT for example the the https web page intialization warning IE pop up can be handled.
Thanks

Similar Messages

Save for Web does not remember quality settings

Hello,
I just about PSE8 today and Im on a mac with Leopard.
PSE does not remember the quality settings when "save for web".
The quality is 0 every time Im saving. Even if I change to 100 it does not remember it.
Can you help please? Im far from being an expert here.

function(){return A.apply(null,[this].concat($A(arguments)))}
However in my library-folder/preferences folder I found 5 folders or files which are connected to adobe.
"write and read" is activated on all and Im the main user on this mac.
There is even one file called "Adobe PSE für Web speichern 6.0 Vor" so pretty much like "save for web". On this one I can write and read as well.
On Windows, there is a preferences file that is stored in the proper location for such files:
C:\Users\Ellis\AppData\Roaming\Adobe\Save For Web PSE\4.0\Adobe Save For Web PSE 4.0 Prefs
PSE has no problem writing that file. This sounds similar to the file you found.
However, there is another file that Save For Web tries to write:
C:\Program Files\Adobe\Photoshop Elements 6.0\Settings\Recently Used Optimizations.irs
It is this file that is located improperly, in Program Files, which is supposed to be only for read-only executables (.exe), dynamic link libraries (.dll), and other read-only assets live. Programs normally don't have write permissions for these folders, so Save For Web fails to save its preferences. Perhaps there is something similar on the Mac. (I'm not an OS X expert, so I can't help with the Mac conventions of where things are kept.)

Save for Web does not open dialog box in PS Elements 8 for Mac

After opening an image and selecting Save for Web, the Save for Web dialog box fails to appear. I've seen similar reports for PS Elements 6 for Mac, but did not find the same files in those directories. Running iMac with OS 10.6.

There are many things that only work in an admin account, but if you're willing to take the trouble, you can change the permissions to allow them to work in a standard account. See:
http://forums.adobe.com/thread/362899
Note that it's pretty important to run Save for Web one time in the admin account after changing the permissions or it still won't work in the standard account.

Saving for web does not give me a file type option

I have been using Illustrator for a while and used Save for Web a lot where it would default as a jpeg now all of a sudden it is default save as type images only and saves the file as png??

traceye,
This may call for a reinstallation the full three step way:
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

"Save for Web" does not work with mac OS 10.6

Everything else runs fine with PSE 6 and OS 10.6, but nothing (!) happens when choosing "Save for Web" (German Version).

Here are the directions for PSE 6 in general:
http://forums.adobe.com/thread/422596?tstart=30
and for save for web:
Finally, to make the Save For Web work, you must do the same thing as above (which is make a folder owner be a non-admin account, and fix the read/write so that in 10.4 the You can says Read & Write). The folder to change with the "command i" get info is :
/Library/Applications Support/Adobe/Photoshop Elements/File Agent/6.0/en_US.
Once this en_US file is owned by a non-admin account and the Read & Write is set, and the padlock is unlocked, the Save For Web works.

Installation procedure for WRT54GC does not detect router on Windows Vista.

Today I bought a used WRT54GC, supposed to be in working condition. I ran the installation procedure on my Vista laptop, following the detailed steps to the letter, and all was going fine, until the detection routine. All the router's lights were blinking, and others solid, as per the instructions, but a few seconds later I got a message stating that ".. Setup was not able to find a Compact Linksys Wireless router on the network....etc".
I immediately went to reset the unit, inserting a pin and waiting until the power light blinked several times (about 30 seconds). This did not help. I also reset the DSL modem, just in case, to no avail.
I have contacted the vendor, and he users that the unit was fine.
The Linksys support page has several user's forums references to how to 'connect' using Windows Vista, but all assume the unit has already been installed and working, which I found frustrating, since I cannot install it!
Any help will be greatly appreciated.
Regards,
gherna1

The trick is not to use the installation disk, but connect the PC/laptop directly to the router (wired), let it assign the dynamic IP address (default action), and then use the router's interface to set it up. Its address is 192.168.1.1 (it may be different for other models or brands).
I was able to set it up this way and now I'm enjoying it. Thanks to all who offered their advice.
Regards,
gherna1.

Follow-up posting flow type Credit for 870 does not exist

Hi SAP,
I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this:
Diagnosis
You have changed the data in such a way that follow-up postings have resulted.
No follow-up posting flow type has been defined for Credit for the flow type 870. A proposed flow type for flow type 3NCH has not been defined either.
System Response
Processing cannot be continued without the flow type.
Procedure
Contact your system administrator.
Procedure for the system administrator
Check and correct the settings for the reference flow type for follow-up postings in Customizing as required.
Is there any setting in configuration Txn SPRO should i do? Will give points for those who help me out this problem.
TQ
Regards,
Nazrul

Hi Nazrul,
yes, there are reference flow types missing for follow-up postings. Follow-up postings are created if condition amounts have been changed and that affects already posted items in the cash flow. In this case follow-up postings are generated. For the follow-up postings the system uses special flow types that have to be maintained in customizing.
SPRO - Real Estate - Conditions, Flow Types, Account Determination - Maintain Flow Types - Assign Reference Flow Types
Relevant relationship keys are:
2 IS-RE: Follow-up postings due to condition incr.
32 IS-RE: Follow-up posting due to condition reduct.
You have to assign reference flow types for these relationship keys.
This should help.
Regards, Franz

WebI does not return failed when scheduling a report which only holds parti

WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini

CS4 PS crash in 64 bit Save for Web but not 32 bit - help!?

Anyone got any ideas please on how to stop Photoshop CS4 crashing on Save for Web in 64 bit version of Windows 7?
Running Windows 7, 64 bit Pro with both 64bit and 32bit versions of Photoshop CS4 installed.
The problem: I design a website, add slices etc as I've done for the last 10 years, go to Save for Web and as the dialogue box is opening and the blue bar at the bottom starts to show it loading, it gets just over half way and then crashes, saying the error message 'Adobe Photoshop CS4 has stopped working'. No solution available and then closes. Does this quite a few times (say 20-30%) of the time but not always. Tried the same PS document running 32bit version of Photoshop CS4 and it saves for web fine, never any crashes, only using the 64 bit version of PS. Need 64bit to take advantage of extra memory etc and one of the reasons the machine/ software combo was bought for.
Running a brand new (well about a month or so) Dell T3500 dual Xeon W3505, 12gb ram, Nvidia Quadro Fx 3800, Raptor HD etc built to run Win 7 Pro and CS4 Extended. I suspect the spec isn't to blame, checked all the hardware etc, no plugins that arent standard with a new install, so no obvious reason I can tell of as to why its not working. Not much else installed and started playing up before I installed other bits of software so doent make sense it might be other software cauing any problems.
Put a support query in and basically got told CS4 wasnt tested with 64 bit CS4 and directed to a possible support solution to 64 bit running on xp/ vista with general advice. No use whatsoever.
Firstly, anyone else having the same problem? Secondly, anyone know how to solve this? If its any help, I've pasted the Action Center info on one of the many crashes:
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit)\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.1.0
Application Timestamp: 499bfd16
Fault Module Name: Save for Web.8BE
Fault Module Version: 11.0.0.12
Fault Module Timestamp: 48d3966d
Exception Code: c0000005
Exception Offset: 000000000007e1a0
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: 9d66
Additional Information 2: 9d660f0d14b8fce02b9e5a9838f791c7
Additional Information 3: d5f3
The graphics card supports the new GPU features but tried with and without those turned on - still the same problem. Tried all sorts of preferences on and off but still no joy.
Would really appreciate any help/ advice on solving this.
Thanks.

Been reading up on that c0000005 error and in all the Operating systems it is a access violation. There are a lot of hits about windows 7 and software not being allowed local access and be saved that way too. What I think is that windows 7 is not allowing it for some reason in 64 bit mode or some security setting in the local needs adjusting?
I found this interesting fact
I was reading where testors were monitoring how windows 7 firewall allows DRM to run in the firewall. All the software they tested asked first for firewall permission (my software on my system asked first so know it is true on my other system). However, according to the testers, with PS CS4 the DRM does not ask to run with firewall premission. Windows 7 just bypasses the asking part and PS CS4 DRM gets firewall access.
Edit by me:
Google the offset code and your the very first to report it.

Idoc INVOIC error Baseline date for payment does not exist

Dear All,
I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
The payment term is correctly maintained in the purchase order.
Idoc message type INVOIC MM.
Baseline date for payment does not exist
Message no. M8356
Diagnosis
You have tried to post a document without a baseline date for payment.
The system will not allow you to do this.
Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
Regards
Arnaud

Hello,
Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
Thanks anyway for your input.
Keep in touch.
Regards
Arnaud

Backup and Recovery Tool does not record backup

When I run the Backup and Recovery Tool backup on my OAS mid-tier (Portal/BI), the backup fails because it is unable to start the wireless service, which I am not using.
This would not be a big deal, except the Tool does not record the backup, so I cannot select it to restore.
Is there a way to force the Tools to recognize these backups or stop the Tools from attempting to start the wireless component?

dmctl have an option to backup the configuration only, I dont remember if that's available for that version,but you can check running dcmctl command without parameters, it would show a big list.
If dont, best way is making a cold backup, stop all process, make backup and start process. Remember to start proceses using dcmctl command, not opmnctl.
Greetings.

Isight audio does not record with video

isight audio does not record with video

Welcome to the forum.
Can you provide us with a bit more information, please?
What OS version are you using?
What are the full specs. of the AV file, that is not Importing with Audio?
What Project did you set up, at New Project?
Exactly what steps were used to Import that AV file?
Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
Good luck,
Hunt

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

[SOLVED] database file for multilib does not exist

Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
Last edited by bdawg (2012-09-18 22:57:17)

bdawg wrote:
Ok so the whole output is as follows:
Warning: database file for 'multilib' does not exist
Error: failed to prepare transaction (could not find database)
And my Pacman.conf is blank
pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
Are you running a 64-bit system?
Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
Last edited by karol (2012-09-18 22:13:59)

OFT for web : does not record in popup windows

Similar Messages

Maybe you are looking for