Old itunes only works for my computer??

So I have tried to download the new itunes but I always get an error to reinstall it and it never opens. Quictime as well says that apple application support needs to be installed but it is installed. I downloaded the old itunes 8.1 and it opened on my computer. Why is this and can anyone help?

Go through the additional steps as mentioned by "turningtest2" below and see if it works and if you still face the same issue then please let us know what all steps and how did you follow it.
Re: Fix for iTunes update 11.1.4 issues
Jan 29, 2014 3:40 PM (in response to weathertop44) You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove.
tt2
https://discussions.apple.com/thread/5825955?start=30&tstart=0

Similar Messages

ITUNES ONLY WORKS FOR 5 MINUTES AT A TIME

iTunes stopped working about a month ago, but then I fixed it using the msconfig solution. It worked for a while now I have the same problem, i can fix it, but then iTunes only works for about five minutes before closing. This is the only way I can fix it; first, by re-installing iTunes, then, doing the msconfig solution and restarting the computer. Then after about 5 minutes it closes. To open it again I have to go through the whole proccess. I cannot figure out how to permanently fix it.

Sounds like you have some malware that is interfering with iTunes.
What do you have to turn off in msconfig to get iTunes working?
It's pretty involved to remove it. If you have purchased security software like Norton or McAfee, I suggest contacting them for help.
Otherwise try this
http://mysite.verizon.net/dbjcgj/id1.html

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

I know I am a luddite but if I am streaming content on my Ipad from a TV station can I get it to appear on Apple TV or does it only work for things in my itunes library?

I know I am a luddite but if I am streaming content on my Ipad from a TV station can I get it to appear on Apple TV or does it only work for things in my itunes library?

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip or email me if you don't have commenting privileges.

There were some updates on my Apps. I updated them on my iTunes but my iPad did not get the same downloads/updates thru iCloud. Does the iCloud only works for "New" Apps or Books downloaded from the store but not the "Updates"?

There were some updates on my Apps. I updated them on my iTunes but my iPad did not get the same downloads/updates thru iCloud. Does the iCloud only works for "New" Apps or Books downloaded from the store but not the "Updates"?

Purchased music does not count against your iCloud storage and you cannot get rid of them in the purchased tab.
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
Look here for help on managing iCloud storage.
http://support.apple.com/kb/HT4847

Does iTunes in the cloud only work for purchased music?

Hi,
I was wondering, does iTunes in the Cloud only work for purchased music?
Also, does the automatic wifi sync feature not sync everything that it would if you manually iniate the wifi sync? The reason I ask is because my iPhone is often connected to my charger, and then today I decided to perform a manual wifi sync and it had a lot of content to update, definitly way more than any changes I've made since I plugged it in to the charger last night.
Thanks,
Brandon

Hi Brandon ...
You can turn on Music, Apps,and Books by tapping Settings > Store
Connecting your iPhone to a wall charger should not have any effect on sycning.

My movie I recently downloaded from itunes "Act of Valor" only works for a out 5 chapters, then it stops working. Other movies work on my iPod touch. How do I fix this issue? If I can't, can I get my money back?

My movie I recently downloaded from itunes "Act of Valor" only works for a out 5 chapters, then it stops working. Other movies work on my iPod touch. How do I fix this issue? If I can't, can I get my money back?

- Go here and see if you can redownload the movies. If you can then delete the movie and redownlod it.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Otherwise, contact iTunes and explain your problem. They should allow a free redownload.

Flash only works for one user

Using IE7. I have three users on my computer. All
have Administrator level access. Flash only works for one of them.
When attempting to play a video on YouTube for example it says "You
either have JavaScrip turned off or an old version of Adobe Flash
Player."
JS is turned on and the current version of Flash Player is
installed.
So does anyone know what is going on here?
Thanks

I was able to fix my problem of Flash only working on user
account. I did the following two steps to correct the problem:
1. First uninstall the Adobe Flash Player plug-in and ActiveX
control by following the instructions stated in
tn_14157.
2. Second Download SubInACL from Microsoft to fix permission
issues that prevent the Flash Player installation by following the
instructions stated in
fb1634cb.
Following the above two steps, fixed my problem of only
having Flash run on only one user account. Now it runs on all four
user accounts.
As a side note: The Flash Player plug-in and ActiveX control
would not run in user accounts with Limited access. But when I set
the permission of the user account to administrative, then Flash
would work.
Regards,
Bob

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Flash Player only works for the account that downloaded it

I downloaded flash player and did not specify any special preferences, however, it doesn't work for the 2 other accounts on the computer. It only runs for the Administrator account from which i downloaded it. I'm running XP professional. Can someone tell me how to fix this?

hi, i had already deleted cookies, temp internet files, etc;
i only have the IE pop up blocker and blocking level set at Medium;
it's the latest version of FP 10.0.45.2.
I installed this version a couple of weeks ago and it worked ok for all accounts (the other 2 accounts are not admin) for a week. Then, it stopped working for all accounts, i reinstalled it (some trial and error involved), then when it finally reinstalled, only works for the one account. i just tried to reinstall from one of the other accounts and error mssg said "failed to register"
Date: Sun, 6 Jun 2010 11:20:59 -0600
From: [email protected]
To: [email protected]
Subject: Flash Player only works for the account that downloaded it
Hi ol, I would go to Tools, click on Internet Options and clear the Temp files. Delete Cookies, Delete Files, including the off line content. I would do this using all accounts. Also check the history files while you are there and delete those also unless you have done so recently.
What version of Flash Player do you have Installed?
Do you use any adblock or pop up blocker software?
Thanks,
eidnolb
>

Trusted Sites GPO only works for administrators

I've got a major problem and was hoping somebody could help me. I've got a hundred users or so that connect to an RDS Farm. The RDS farm is made up of several Windows Server 2008 R2 servers. One with IE 10 and the other with IE 8.
The problem that I'm having is if add sites to zone assignment in group policy and add sites to the trusted zone it will only work for users that are administrators. I found a reference to this problem and the issue being IE Enhanced Security, but
Enhanced Security is turned off.
If I'm a normal user with Remote Desktop User rights and I go into IE and check Trusted Sites, there is nothing there. If I login as administrator and check I can see all the trusted sites.
Anyone know how I can fix this?

Hi Cyprus,
Please check if you have the computers or users needing the policy are in a group that is specified. Remember that domain users includes all users, domain computers includes all computer, and authenticated users includes both users and computer. By
default, a GPO will be scoped to Authenticated Users.
Also please run gpresult command on non-administrator user to check if it sync to client successfully.
In addition, I suggest you ask Group Policy forum for more professional help:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support

Caching service only works for OS X updates and not for Apps

Hello,
It seems that my OS X Server Caching service only works for Apple OS X Software Updates (in Mac App Store updates, when the icon of Mountain Lion appears). I see it in my logs in verbose mode when I download an Apple OS X Software Updates and not when I download an app in Mac Appstore.
So I'm sure my Caching service works but not for all downloads.
Why ? What's wrong with my server ?
I read in some blogs that Caching Server can work for iOS devices appstore too. I try to download some apps with my iphone but nothing happens in logs ...
Can somebody help me about the Caching Server ?
Thank you.

I am with chugues http://www.apple.com/ios/business/
Caching Server 2 supports iOS 7.
By caching purchased content and software updates on a local Mac running OS X Mavericks Server, Caching Server 2 speeds up the download and delivery of content through the App Store, Mac App Store, iTunes Store and iBookstore. Your users get faster downloads of content and updates to their iOS devices directly over your corporate network.
Shows iOS updates and et al. Why is this feature not on yet?

ITUNES quit working on my computer

ITUNES quit working on my computer with an error message about the "MSVCR80.dll" file. I tried to re-install ITUNES, but couldn't get thatto work. I uninstalled ITUNES in the proper order according to ITUNES support. I still can't get ITUNES to downlaod to my computer, which uses Windows Vista. I get ann error message that the file can't be downloaded. Any ideas?

many thanks.
The text of the error message is, "iTunesSetup_exe(1) couldn't be downloaded".
Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
If you can't get a working installer via the standard download links, try the following download links instead:
iTunes 11.1.4 for Windows (32-bit) - iTunesSetup.exe
iTunes 11.1.4 for Windows (64-bit) - iTunes64Setup.exe

Creative SB0410 digital out only works for dd/dts, not for stereo or web videos...

Creative SB0410 digital out only works for dd/dts, not for stereo or web videos...
Hi all,
Need some suggestions here.
I have an old Creative sb0410 7.1 channel card and after reading few long threads, I am able to output dd/dts via 3.5mm to rca connector.
However, the problem is I only hear sound if the video has dd or dts sound. When I play normal MP3 or youtube videos, there is no sound.
Is there a way to configure the digital out so it sends all sound to the receiver whether it's dd or dts or regular stereo?
Thanks

As a workaround, I used another 3.5mm stereo to RCA adapter on stereo LR output of sound card and hooked to a different input in my receiver.
Problem, is I have to switch input in receiver for non DTS/DD sounds.
It's disappointing that my upscaling dvd player sends all sound signals via coax but this card does not.
Isn't it supposed to send all sound signals via coax regardless whether it is DTS/DD or normal stereo/mono etc?

My 2 month old nano only works while charging, i've tried resetting it and still the same.

my 2 month old nano only works while charging, i've tried resetting it and still the same.

You are still under warranty. Either call iPod tech support - U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) or take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.

Old itunes only works for my computer??

Similar Messages

Maybe you are looking for