OMS 12c Upgrade Stuck at this error Error in invoking target 'client_shared

Hi All
We are Upgrading OMS from 11.1 to 12c
stuck at this error after invoking runInstaller
Following 1 system upgrade. (graphical mode).
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: /opt/app/wls/oms12c/oms/bin/genclntsh
INFO: make: execvp: /opt/app/wls/oms12c/oms/bin/genclntsh: Permission denied
INFO: make: *** [client_sharedlib] Error 127
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/opt/app/wls/oms12c/oms/rdbms/lib/ins_rdbms.mk'. See '/opt/app/oraInventory/logs/installActions2012-08-02_06-38-02-PM.log' for details.
Exception Severity: 1
INFO: POPUP WARNING:Error in invoking target 'client_sharedlib' of makefile '/opt/app/wls/oms12c/oms/rdbms/lib/ins_rdbms.mk'. See '/opt/app/oraInventory/logs/installActions2012-08-02_06-38-02-PM.log' for details.
Click "Retry" to try again.
Click "Ignore" to ignore this error and go on.
Click "Cancel" to stop this installation.
Please Advise
Edited by: TechAdmin on Aug 2, 2012 4:09 PM
Edited by: TechAdmin on Aug 2, 2012 4:11 PM

I installed all the packages and it allowed me to proceed furthur
but now it throws another error saying that
The log says "ORA-12003: materialized view "SYSMAN"."MGMT_ECM_MD_ALL_TBL_COLUMNS" does not exist" during the OMS Upgrade using graphical mode.
We are not sure if that Materialized view ever exists on it or not.
Please advise
Below is the detailed log :
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /opt/app/wls/OMS12c/oms/sysman/log/schemamanager/m_073012_1147_AM/m_073012_1147_AM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:dr40kpyuxcpe
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-12003: materialized view "SYSMAN"."MGMT_ECM_MD_ALL_TBL_COLUMNS" does not exist
File:/opt/app/wls/OMS12c/oms/sysman/admin/emdrep/sql/core/11.2.0.1/ecm/ecm_tables_alter.sql
Statement:DROP MATERIALIZED VIEW MGMT_ECM_MD_ALL_TBL_COLUMNS
INFO: oracle.sysman.top.oms:The plug-in Repository Upgrade has failed its perform method
The other logs at <OMS_HOME>sysman/log/schemamanager/* says that the index is missing we checked our backups and all other possible ways to find if that index ever existed but we dont see anything as such.
2012-08-06 12:07:54,476 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 196
2012-08-06 12:08:00,479 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 197
2012-08-06 12:08:06,570 [t970bytvwebs] INFO emschema.t970bytvwebs - repos connection is not null, using old one
2012-08-06 12:08:06,571 [t970bytvwebs] INFO emschema.t970bytvwebs - executing: SELECT count(*) FROM all_objects WHERE object_name='MGMT_MESSAGES_IDX_01' AND owner='SYSMAN'
2012-08-06 12:08:06,572 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 198
2012-08-06 12:08:12,574 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 199
2012-08-06 12:08:18,576 [t970bytvwebs] INFO emschema.t970bytvwebs - not found index on mgmt_messages
2012-08-06 12:08:18,576 [t970bytvwebs] INFO emschema.t970bytvwebs - error: not found index on mgmt_messages for transx repos user exists: true mgmt_messages exists: true; index on mgmt_messages exist: false; found connection for repos user: true
2012-08-06 12:08:18,576 [t970bytvwebs] ERROR emschema.t970bytvwebs - Failed Parameter Validation
2012-08-06 12:08:18,576 [t970bytvwebs] ERROR emschema.t970bytvwebs - NULL Exception was thrown!
2012-08-06 12:08:18,576 [t970bytvwebs] ERROR emschema.t970bytvwebs - Failed Parameter Validation
we never had that index in our database.so that we could go back and check if that exits
Please suggest a solution for this.
Thanks
Unfortunately we dont have any other database to compare it to see wether it exits
Edited by: TechAdmin on Aug 6, 2012 11:34 AM

Similar Messages

After IOS upgrade I get this FIPS error

FIPS: Flash Key Check : End, Not Found,FIPS Mode Not Enabled
I used this code: cat3k_caa-universalk9.SPA.03.03.01.SE.150-1.EZ1.bin
What am Idoing wrong here? will this effect the switch? I havent seen this error before and a google search isnt very helpfull.
Here is my sh ver before upgradeing IOS
Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIV
ERSALK9-M), Version 03.02.02.SE RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 14-Jun-13 19:24 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 1.2, RELEASE SOFTWARE
(P)

Hi,
Looks like this is not supported on that IOS XE version. See the release notes below:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/release_notes/OL_30562_01.html#wp57462
Hope this helps.

ASR Hyper-v (VMM) to Azure and we are stuck with this error while preparing the VMM Server

We are stuck with this error while installing ASR provider and registering with Azure Vault, can i get some help on this
Error:
NO Vaults could be retried for the registration key. Please ensure that
1, your registration key has not expired.You can re-downloading registration key from Azure site Recovery portal
2, Your system clock is not out of sync with the selected system time zone
System Clock is set to IST and Azure to southeastasia

Hi,
Could you please ensure that you have downloaded the latest registration key from the portal?
Also ensure that the machine from where you are accessing the portal and the VMM server has the right time according to your time zone.
Thank you,
Ruturaj

I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

What does that have to do with Digital Publishing Suite?
We’d love to help but if does have something to do with it, please give us
some details.

I can't buy elements 13 upgrade. I get this message "Error in Your order"

I can't buy elements 13 upgrade. I get this message "Error in Your order"

Hi Attila74,
Please chat with our Customer Service to receive the upgrade. http://bit.ly/E12_PAU
Ragards,
Sandeep

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

TS2755 I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise

I'm trying to restore my iphone but when I plug it into my mac it says an unkown error ocured (9) but it says iphone must be restored so I'm stuck in this loop!

my Iphone was acting weird so I wanted to restore it, It's plugged into my mac and it says "an unknown error occured (9)" and it wont restore, but then it says, restore your iphone, I'm stuck in this loop

Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.

Encounter another error when adding host target in EM 12c

Hi, all
After installing EM 12c successfully, I then tried to add target to the EM, I encountered such error:
Error Message: The Oracle Management Server (OMS) host and port specified via OMS_HOST and EM_UPLOAD_PORT is not available. Pass in a valid hostname and port number for the OMS to successfully deploy the agent.
Exit Code :1
Again I am sure that my host name is reachable and port number it complains is open.
I also opened the SR with oracle support, the SR is 3-6060170341.
I would appreciate if anyone can help and shed some light on this issue.
Regards.
Yong

As i mentioned earlier if you need help from Oracle pls open a Service request (SR) with oracle support and upload the following logs:
<OMS_INSTANCE_HOME>/sysman/agentpush/*.*
Share the SR number.
Can you also ping the oms host from agent host and vice-versa?
Do you have any firwall ?
While deploying the agent using Add host wizard, keep the port input field blank and it will pick up the next free port automatically. There is some env setup issue which is causing this in both install types.
Once you log an SR, Oracle support will help you, they will look into your env and find the root cause. Posting small snapshot of failure in forum can’t be debugged further without logs or a web conference.
Edited by: Akanksha on Feb 11, 2013 2:32 PM

HT201263 IPhone 4S unlocked set , from iOS 6.1.2 upgrade to IOS 6.1.3 unable to update and now is in recevery mode, tried using ITunes to restore but end error ( error -1)

I had one iPhone 4S buy from Singapore, have been using this phone about a year,
Things happen when update from iOS 6.1.2 to iOS 6.1.3 (non-jail break phone).
After update, when on 3G, phone become no service or searching. Had change new SIM card carrier vision 14.1.
Things never change, so I did another restore using iTunes , things get worst, phone stuck in recovery mode and ending error (error-1)
Had tried few time and same error.
Note ITunes latest vision

I had the same issue until yesterday. been struggling with it for the last 2 days. I bought the unlocked 4s from the store a week ago and now I cannot upgrade from 6.1 to the higher version.
Although, after searching a lot on the net, I was able to find a software that'll get you out of the recovery mode. Hope this helps. Install the software and click on the 'Recovery Mode Loop Fixer' (2nd tab) and click 'Set Auto Boot True'
The software looks shady but worked.
Link:
Ireb download link- WINDOWS
NEW LINKS- ( http://hotfile.com/dl/179514703/4b201... ) (http://www.mediafire.com/?c4jqux6alnj... )
IREB FOR MAC
http://mediafire.com/?mymjzjaymyj

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

IPhone 5 stuck in recovery mode - Error 3194 on iTunes?

Hello,
I've had my iPhone 5 for nearly 2 years now (it's due an upgrade thankfully!), I have no problems usually updating my phone to the latest software, however last night when my phone let me know I could download iOS 8, I did so. The screen then froze on what seems to be the recovery mode, it just shows an image telling me to connect to iTunes. I made sure I had the up to date version of iTunes and upon connecting to the computer, it comes up saying iPhone cannot be reocgnised and that in order to proceed with the update I have to restore the phone to factory settings. Me and my boyfriend tried various apps such as Reiboot and TinyUmbrella to get it out of recovery mode first, but had no luck. Therefore I came to the conclusion to click 'Restore to factory settings' and twice it gave me the message 'Error 319'4 - restoration unsuccessful etc etc.. what does this mean? I tried putting it into DFU mode but the pc would still not recognise it. I do not understand what's happened!! I was going to go down to my local EE store to find out but am now thinking they won't be able to do much, and my local Apple store is about 15 miles away - so any help on here would be greatly appreciated!!
Thanks in advance.

Hi AmberX92,
If you receive an error 3194 when attempting to restore your iPhone, I would suggest that you troubleshoot using the steps in this article -
Error 3194, Error 17, or "This device isn't eligible for the requested build"
Thanks for using Apple Support Communities.
Best,
Brett L

ECC 6 SR3 upgrade I am getting following error at RSVBCHCK

2EETQ241 Errors found in logfiles - accumulated in file "PSVBCHCK.ELG"
1EETQ203 Upgrade phase "JOB_RSVBCHCK_D" aborted with errors
1 ETH010XRSVBCHCK: Check of open update requests
2EETG050 Update records still exist - Please process.
There is no SM13 nor SMQ1 entries in the system, also reorganiezed update records, also checked following.
SQL> select * from sapr3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBMOD;
no rows selected
SQL> select * from SAPR3.VBHDR;
no rows selected
SQL>
Incase anyone had faced similar issues, and found a workarond please let me know
thanks.

Hi Mathew,
Please check if your system has the ABAP program "RMCEXCHK" as per OSS Note no. 1083709.
Once you run this program, it exactly would let you know what are the areas which are causing the issues. Based on that you can empty out the LIS Set up tables.
Also, can you please check the update program for LIS has emptied out the entries in SMQ1.
Regards,
Anil

What does this mean: ERROR! Shared library ioser12 could not be found.

Hi all,
I am trying to establisch a JDBC connection to a MaxDB database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error messages that the user is still connected. I think these are followups from the first one - one testcase may be broken by this error, but the connection is not closed.
I searched the web to find what i could do against it. I found some forum discussions about this problem and hence i tried to set my path and classpath to locations where the isoser12.dll is located (runtime environment/bin), and finally copied it to the windows/system32 dir.
Nothing made this error disappear. I am still stuck with this one since two days.
Btw, the same testcases work well with other databases like oracle or db2.
Hence, i am calling to you for some ideas about this error.
Thank you in advance for help,
Andreas Schroeder

Hi Andreas,
I am also interested in making maxdb(sapdb) work with S1 application server. I would appreciate if you could let me know if you are able to make it work with S1 V8 server.
Thanks,
Gorton Zhao
Hi all,
I am trying to establisch a JDBC connection to a MaxDB
database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i
am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my
own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error
messages that the user is still connected. I think
these are followups from the first one - one testcase
may be broken by this error, but the connection is not
closed.
I searched the web to find what i could do against it.
I found some forum discussions about this problem and
hence i tried to set my path and classpath to
locations where the isoser12.dll is located (runtime
environment/bin), and finally copied it to the
windows/system32 dir.
Nothing made this error disappear. I am still stuck
with this one since two days.
Btw, the same testcases work well with other databases
like oracle or db2.
Hence, i am calling to you for some ideas about this
error.
Thank you in advance for help,
Andreas Schroeder

SRM 4.0 upgrade to SRM 7.0 - Error in Phase PARDIST_SHD

Hello,
I am upgrading the SAP SRM 4.0 / MSSQL 2005 / Windows 2003 (64 bit) to SRM 7.0 but I am getting this error in the phase PARDIST_SHD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DISTRIBUTION ERRORS and RETURN CODE in DS100310.SD1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEDA300 No active nametab exists for "CDBC_LANG_TABLES"
Long text:
    Cause
      Thee is no active nametab in the system, although an
      active ABAP/4 Dictionary object was expected.
    System Response
      None
    What to do
      Reactivate the ABAP/4 Dictionary object.
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CDBC_LANG_TABLES":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_ADJCONT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_ADJCONT":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_HH_SRV_SYNC"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_HH_SRV_SYNC":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_PROCESSFLTT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_PROCESSFLTT":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "CRMC_PROCESS_FLT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "CRMC_PROCESS_FLT":    Action: "DNA"      Mode flag: "R"    Return code: "9"
2EEDA300 No active nametab exists for "IPCE_MON_NODES"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471    Result   "IPCE_MON_NODES":    Action: "DNA"      Mode flag: "R"    Return code: "9"
What will I do now? How will resolve this issue? Please help me ASAP
Thanks
Gautam

Go to SE11, Menu->Utilities->Database Object->Check
            Menu->Utilities->Runtime Object->Check
If there are inconsistency, please follow note 211492 to adjust the inc
onsistency in original instance . But if these tables are obsolete,
for example doesn't exist in the system any more, you could also choose the option to 'Ignore' the error and
continue with the upgrade. But this is a BC-UPG issue.
Regards
Lauren

OMS 12c Upgrade Stuck at this error Error in invoking target 'client_shared

Similar Messages

Maybe you are looking for