OMS won't stay STARTed

Successful install in re all else, but Oracle Mgt Server starts, then stops. It never starts and runs. The system's event viewer tells me "process termination failed for JRE. %2.", and directs me to the file
C:\oracle\ora92\sysman\log\oms.nohup
In that file, there are lots of java.lang.NullPointerExceptions, with the occasional
oracle.sysman.vxx.vxxo.VxxoNameNotFoundException: VXX-2009 : Could not find service context
and
exception VxaInvalidStateException{wstring reason="VXA-3032 : Error in attempting to bind OMS Services over ORB. Shutting down oms";}
finally leading to
"Could not start management server. Initialization failure"
which, of course, I already knew...
An earlier search of the forums hinted that using the plain old IP address insead of the DHCP name (in lisnerctl.ora and / or tnsnames.ora) but the behavior is unchanged.
This is a desktop install, on XP Professional V.2002 service pack 1, on a Dell 2.39 GHz pentium, 4cpu, 256MB ram.
jeez, it should work... HELP?
Thanks in advance -- Sara Riley

hi mike,
i m facing the same problem as me also a beginner...
what i did is created a database and then created repository for it...
now i m getting the VTK-1000 error while trying to logon
login name/pwd/server i m trying is
sysman/oem_temp/oracleofshome30 or oracleofshome30managementserver
can u plz help me out on this my e-mailid is
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Mike Jensen ([email protected]):
I'm relatively new to Oracle 8i, and am trying to launch the oracle management service. I've been through all the archives, and not found a good answer. Here's what I've done:
1 - created a repository in the database of interest. Now in doing so I've setup a username and password equal to one of the users in the DB. I've also tried by creating a new user. Both seem to configure just fine, but...
2 - When I try to start the NT service, it comes up as started, then if I try connect quickly I get a 'busy initializing' message (must mean I'm talking to the correct OMS), but then the service goes down.
In attempting to connect I'm providing the same username/password as the repository. I've used the configuration assistant to change the username/password to a couple different options, to no avail.
Can someone help or point to documentation on how this thing should be setup?
Thank you in advance for any help you can offer.<HR></BLOCKQUOTE>
null

Similar Messages

  • Service won't stay started!

    I'm running ZFH 5.1.
    The darn service that runs on the windows servers won't stay started.
    It will start up fine, run for about 5 minutes and then stop.
    In the event logs there are no entries to show errors or problems.
    The servers are Windows 2003 or Windows 2000. I've tried it on both versions.
    Any ideas?
    Thanks,
    Cheryl

    Cheryl,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • OMS won't stay up

    I'm relatively new to Oracle 8i, and am trying to launch the oracle management service. I've been through all the archives, and not found a good answer. Here's what I've done:
    1 - created a repository in the database of interest. Now in doing so I've setup a username and password equal to one of the users in the DB. I've also tried by creating a new user. Both seem to configure just fine, but...
    2 - When I try to start the NT service, it comes up as started, then if I try connect quickly I get a 'busy initializing' message (must mean I'm talking to the correct OMS), but then the service goes down.
    In attempting to connect I'm providing the same username/password as the repository. I've used the configuration assistant to change the username/password to a couple different options, to no avail.
    Can someone help or point to documentation on how this thing should be setup?
    Thank you in advance for any help you can offer.

    hi mike,
    i m facing the same problem as me also a beginner...
    what i did is created a database and then created repository for it...
    now i m getting the VTK-1000 error while trying to logon
    login name/pwd/server i m trying is
    sysman/oem_temp/oracleofshome30 or oracleofshome30managementserver
    can u plz help me out on this my e-mailid is
    [email protected]
    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Mike Jensen ([email protected]):
    I'm relatively new to Oracle 8i, and am trying to launch the oracle management service. I've been through all the archives, and not found a good answer. Here's what I've done:
    1 - created a repository in the database of interest. Now in doing so I've setup a username and password equal to one of the users in the DB. I've also tried by creating a new user. Both seem to configure just fine, but...
    2 - When I try to start the NT service, it comes up as started, then if I try connect quickly I get a 'busy initializing' message (must mean I'm talking to the correct OMS), but then the service goes down.
    In attempting to connect I'm providing the same username/password as the repository. I've used the configuration assistant to change the username/password to a couple different options, to no avail.
    Can someone help or point to documentation on how this thing should be setup?
    Thank you in advance for any help you can offer.<HR></BLOCKQUOTE>
    null

  • Mac G5 won't stay started

    Here's my current problem: If I boot up my Power Mac G5, I get the gray apple screen and then it just shuts off. I can boot from a CD, and when I use the install CD/Disk Utility to check out the disk, I get this:
    Missing thread record (id=34882)
    Invalid extent entry
    Invalid key length
    Volume check failed
    Error: Filesystem verify or repair failed
    Any ideas what's up with it?

    Hi Thomas Zahler-
    Then you probably are simply suffering a corrupted directory. That is why I suggest trying to repair the drive first.
    DiskWarrior may be your friend: DiskWarrior
    Luck-
    -DaddyPaycheck

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

  • HT201177 My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on besides the cursor. what should I do? Thanks.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

  • 30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

    30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

    OK, I tried setting Energy Savings to 1 minute. The Mac shut down and would not power back up via the power button, had to pull power plug. So it seems to be tied to the Energy settings.

  • Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.

    Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.

    Hi cybertoof,
    Welcome to Apple Support Communities.
    It sounds like you're seeing a startup issue with your Mac, it's booting to a gray screen with an Apple logo. Try the suggestions in the article linked below, they will resolve most issues related to starting up your Mac.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    I hope this helps.
    -Jason

  • My spooler won't stay running, I can't add printers.

    My spooler won't stay running, I can't add printers.
    Not able to figure out even after firewall on/off, network on/off and all setting to default...
    Regards
    Reddy

    find some possibility solution for spooler wont start here
    https://social.technet.microsoft.com/Forums/en-US/d875ab83-1b17-4a28-8738-e67249a2bdfd/cannot-print-after-update-to-81-printers-gone-print-spooler-keeps-stopping-cannot-add?forum=w8itprohardware
    I recommended this step
    1. do printer troubleshooting
    http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab3&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    2. Uninstall antivirus using removal tools (Kapersky)
    3. Registry trick as
    JSB43211 suggested, backup your registry before perform this
    1. Open Regedit as Administrator 
    2. Find the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\ key. 
    3. If you are on a 64-Bit machine, browse to the "Windows x64" sub-key (else "Windows NT x86") 
    4. Under the "Print Processors" sub-key DELETE ALL THE SUB-KEYS EXCEPT "winprint" key 
    5. Start the Print Spooler service. 
    6. Test to see if you can Add a printer. 

  • Folders in Files Panel won't stay collapsed

    There are 2 folders in my Files Panel which won't stay collapsed.  When I open Dreamweaver, they are expanded.  If I click the arrow next to them a few times they will eventually collapse, but then as soon as I open any other file or folder they re-expand themselves.  This first started back when I was using Dreamweaver CS5 with one folder which refused to collapse. A year later, I had updated to Dreamweaver CS6, and now had 2 folders which wouldn't stay collapsed. This morning I updated to Dreamweaver CC, and the same 2 folders still won't stay collapsed!
    I searched the forum and found people with the same issue going back to 2007, but have yet to find any solution.  A few people recommended editing the Windows Registry - but I'm using the Mac version.  Several people said that they had some luck completely deleting the site settings and re-creating it - but that seems a bit extreme, plus several people said that it just started happening again later with another folder!
    Does anyone have a permanent solution??
    Here are a few of the other posts regarding this issue:
    http://forums.adobe.com/message/4418090
    http://forums.adobe.com/message/975917
    http://forums.adobe.com/message/3596836
    http://forums.adobe.com/message/938616
    http://forums.adobe.com/message/809937
    Also - just as an FYI.  If I rename the folder, it stops happening.  I can close and restart Dreamweaver and it stays collapsed. But, as soon as I rename the folder back - even if I do so after closing and reopening the program - it starts doing it again!!
    Not sure if this is related either - but I saw in someone else's post that setting Related Files to Automatically, instead of Manual, fixed the problem.  I did try this, to no avail.  I even tried many times to turn off Related Files (by unchecking the Enable Related Files box in Preferences) but it keeps re-enabling itself!

    As Jon Suggested , try rebuilding the site Cache
    Allow me to Quote another DW user
    First let me add here that I did find that when I upgraded to the new Creative Cloud version of DW and it imported my 12.0 site settings, the problem followed those settings into the 13.0 version.
    Im on a Mac so these instructions would need to be taylored to the PC in regards to the location of the file referenced. And I am not sure if it's even the same file on the PC. So I can only speak for my experience on the Mac.
    I've fixed my 12.0 version and my 13.0 version this way.
    It was a corrupted "Site Prefs" file. I tried to fix it, but the entries where so mixed up that there was no way that was going to work. So I deleted the "Site Prefs" file and let DW recreate it.
    In order to recreate the Site Prefs file, it meant loosing all of my site settings.
    To make things less painful...
    Open DW and go to Manage Sites. Select all sites and do an export of all .ste files, with passwords and user names, into a temperary folder and close DW.
    Now find file folder called "12.0" or 13.0" in the Library/Application Support/Adobe/Common/12.0 (13.0 for the cloud version)/Sites/ and rename it to "12.0_old" or whatever. (Note: you may need to Option-click the Go Menu in the Finder in order to get the Library choice to appear).
    Reopen DW and it will recreate a new blank "Site Prefs" file. Go to "Manage Sites..." and click on "Import Site". Select all of the .ste files and import them.
    DW will update the site's cache the first time you open each site and it might also ask you to give permission to access the password stored in you keychain. Choose "Always Allow" for each one.
    That's it. Now my corrupted folder doesn't pop open every time I click on another folder.
    Mac OS 10.7.5
    DW CS6 (12.0 build 5861) &/or DW CC (13.0 build 6391)
    As I said, this worked great for me. But use these steps at your own discretion.

  • MBP display won't stay off, wakes from sleep

    I have a newish 15" MBP, 1680 display, hooked up to a Dell external monitor when it's at home. When I go to bed I cut power to the display via control-shift-eject, but generally don't put the computer to sleep overnight.
    With this new machine, after it's been running for a while (as little as a day, or as long as a couple weeks), the displays will come on again in the night. Once this happens, the displays won't stay off for longer than about five seconds. If I then put the machine to sleep, it'll wake itself up minutes or hours later (generally not long enough to miss a Time Machine interval). The only cure is rebooting.
    I tried an SMC reset, but that fix only lasted about as long as any other reboot.
    I've since tried systematically removing every peripheral (a USB hub, the external display, any directly-connected iOS devices) and testing display-off after each; no change. I've turned off my Bluetooth keyboard and mouse, then disabled Bluetooth on the computer, turned off wifi, quit every menu extra (jitouch, Viscosity, Dropbox, Pastebot, Fastscripts, Transmit, Teleport), and quit every running application. The problem remains repeatable after every step.
    It's repeatable at the moment — any suggestions for other things to try, preferably short of the reboot which temporarily masks the problem? I'm a little concerned that it's going to manifest at some point while I have the laptop sitting in a bag, which will then cook itself.
    I'm on 10.6.4 now, the problem started on 10.6.3.
    Thanks.

    Try checking the system logs in Applications/Utilities/Console.app for clues. The entries carry time stamps. Usually a wake event will leave some trace. By matching time stamps to the time of occurrence you may find the culprit.

  • Laptop won't stay on ac power..

    Earlier today my monitor randomly started flashing from normal to dim over & over for about a minute because it was switching from ac adaptor to battery over & over.  This happened a couple times then stopped.  But soon, it became continuous   It won't stay on ac power now, it just keeps going back & forth & that causes my poor comp to freeze up.  The light on the ac adaptor starts flashing once the comp is turned on, otherwise it's on just fine.  Now I can't use my laptop because my battery doesn't last long enough & I can't keep it plugged in while on or the constant back & forth power struggle will freeze it up, as previously stated!  Is there a short on my motherboard or can I easily fix this problem?  Please help!  I have an HP Pavillion HDX 9300.

    This is usually a symptom of a bad power jack.
    The part looks like this:
    ebay
    Sorry to say your jack is soldered to the motherboard and it is a pretty big job for the end user to try to fix it.
    repair service
    There are numerous repair services on the internet and you might have a shop right in your town that can do it.

  • HT204075 email account won't stay online

    Mac email connects to the internet but can't connect to the POP server or the SMTP server, so I can't send or receive. Checked all settings and they're correct. Settings show the mail account is "offline" but it won't stay online for more than a few seconds when I click "take all accounts online.

    Triple-click the word "telnet" in the line below on this page to select the whole line:
    telnet pop.centurytel.net 995
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You should almost instantly get three or more lines of output below what you entered, one of which is this:
    Escape character is '^]'.
    If there's no output within ten seconds, consider that a failure. If you get something different from the above, please post it in a reply. You can then quit Terminal.

  • My version CS won't stay open and...

    I've had CS2 for several years and it has worked with no problem until last week. Suddenly Indesign won't open, Photoshop won't open either but Space Monkey tries to open in it's place (what is Space Monkey anyhow and how did I get that!?) and it then tells me my Adobe Photoshop user name, organization or serial number is missing or invalid. Also, the Version Cue CS2 icon in the top menu bar of the computer has a red X through it and it won't stay turned on. How did this happen, and how can I get it back to running well? Thank you for any help. Shelley

    PupuleLady wrote:
    I created a new user account (can't believe I figured out how to do that), but InDesign didn't open. It made the attempt with the icon bouncing once, but then nothing.
    Thanks for helping me with this... even on a weekend.?
    Would you recommend just reinstalling the software from the disks again? If so, would that cause any problem with existing documents files on my hard drive?
    Shelley
    At this point ther are a few things that I would do.
    Before reinstalling anything I would run Diskwarrior or Disk Utility on the OS install disk. Start the computer from the DVD and run DW if you have it or Disk Utility and repair the disk. this will make sure your directory is correct. If that does not fix it. I would reinstall Indesign be sure to trash the prefs as well. If that does not fix the problem I would then do an Archive and install of the System then upgrade to 10.4.11. An A & I will give you a fresh system and a fresh user account and keep all applications and account settings . I might actually do this before reinstalling ID that way I know the app is getting installed on a fresh system.
    Something I forgot to ask. did you install anything on the computer in-between the time it worked and stopped working?

  • Visited links using Safari on my iPad 2 won't stay the "visited" color

    Visited links using Safari on my iPad 2 won't stay the "visited" color after I close the tab, put the iPad in sleep mode (or whatever it's called), or when I power off the iPad.
    There are certain sites I visit where it comes in very handy to be able to see which links I've already clicked on. The links will stay the "visited" color during the time I'm on the site, but later they all go back to the "unvisited" color.
    Is there any way I can fix this on an iPad?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for