On-screen controls not very responsive

I've noticed this in a few places, but a couple spring to mind :-
The Back button that appears in some settings windows (bottom left). Often I have to press this 3 or 4 times before it will go back.
Answering the phone. The dialog tells me to swipe down, but it often takes 3 or more swipes before it actually answers the call.

Hello mfarmilo,
To better assist you with this I have a couple questions:
Does this happen with all calls that are received?
What is the battery level when you are having these problems?
Have you tried rebooting the BlackBerry smartphone by holding down the bottom on the top of the BlackBerry smartphone and selecting restart?
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • Bottom part of the itouch screen is not very responsive

    My itouch recently came in counter with some water, i managed to remove the water i think. ( i used the rice method). Now the only part that is giving me issues is the bottom part of the screen. Any tips on how to fix this? Also how much would apple charge me for a repair?

    basics from the User Guide are restart, reset, restore from backup, restore as NEW.  Try each step in order until your problem is solved.  If not solved after ALL these steps have been tried, you'll need to bring your phone to Apple for evaluation.

  • My home button is not very responsive and I have to click it few times to get it to work. What do I need to do to get it fixed?

    My home button is not very responsive and I have to click it few times to get it to work. What do I need to do to get it fixed?

    TROUBLESHOOTING iPhone Hardware
    http://support.apple.com/kb/TS2802
    http://support.apple.com/kb/TS1630
    The Home button is slow to respond
    If the Home button is slow to respond when exiting one application, try another application.
    If the issue exists only in certain applications, try removing and reinstalling those applications. For further assistance in installing and troubleshooting applications see this article
    If the issue continues, turn iPhone off and back on.
    If the issue continues, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds or until the Apple logo appears.
    Restore iPhone. Follow the steps the steps in the iPhone Troubleshooting Assistant.

  • Since the Adobe "Chat" system is not very responsive they suggest I ask the community my question. Did they jump you monthly fee $10 without explanation? Check your credit card.

    Since the Adobe "Chat" system is not very responsive they suggest I ask the community my question. Did they jump you monthly fee $10 without explanation? Check your credit card.
    Perhaps they will answer now?

    I remember when Adobe Customer Support existed.  Weren't those the good ole days.  Now they've pawned us off on one another.  Apparently this is what we can expect from Adobe from this point forward.

  • My ipod touch recently cracked the screen is not very broken, I'm from Brazil and bought my ipod touch in Miami want to know where I can fix it there in the united states

    my ipod touch recently cracked the screen is not very broken, I'm from Brazil and bought my ipod touch in Miami want to know where I can fix it there in the united states? And how much it would cost?

    Apple will not take it as a trade-in for an upgrade to an iPad touch
    The will take it for recycle only
    Your best bet is to sell it on your own and then use those funds to get the new iPod.
    Allan

  • Display full-screen controls NOT visible

    I exported my keynote presentation as a QuickTime full-screen movie. In Preferences, I have the controls checked to display full-screen controls and to never hide them. They do not show up anywhere. I also set the presentation as a slideshow to control the presentation using the arrow keys and they do not show up. In the Guide it states that as long as "Display full-screen controls" is selected in QT Player Preferences, you can make hidden controls appear by moving the pointer. They don't.
    Any help out there would be appreciated...I have a deadline to meet!

    Huh, I didn't realize you had to format a flash drive for a Mac, I'll check that out.
    O.K. I may have something that I said I was going to try...I unlocked the file, changed *_My* permission_, the Staff and Everyone else to "Read Only" privileges, then locked again. I then zipped it and sent it to my son this morning. He said he could open it, change it but it would not allow him to save it! I'm going to test it further somehow but I don't know anybody else that has a Mac w/Keynote '08. Do you have Keynote 08? Can I send it to you to test (it would be alot easier) or to someone in the Keynote discussion area?
    This message should now have a subject line..."Keynote presentation to CD to be accessed, but not changed?" When this all began, I searched discussions in Keynote on this and found nothing with a concrete answer, only that you cannot save a keynote presentation as password protected. I posted twice and no one answered. I think this part of our discussion will help Keynote people.
    *Back to your area of expertise and my original question!*... Can you still look to see what key commands force the HUD for me for my QuickTime Movie as Slideshow? I know they could not change that, but the arrow controls would have to be displayed. I don't know what HUD means but I'm going to search too... I found this link: http://developer.apple.com/documentation/QuickTime/Conceptual/QT7-2Update_Guide/NewFeaturesChangesEnhancements/chapter_2_section9.html
    Could you take a look and see if this is what I need? I do have Mac OS X v10.5.4 and QT v7.5 and my Preferences window does not have a recording tab but my Full screen window looks that same. When I view my A/V controls it also doesn't view as in figure 1-8. I'm confused again! QT 7.5 is the latest version, isn't it?

  • Keyboard is not very responsive

    The keyboard on my ideapad U530 is not as responsive as I would like for it to be.  I have to hit the keys quite hard, which of course slows down my speed and affects the accuracy of my input.    Is there a way to change the amount of pressure that I need to use on the keyboard?

    Welcome to the Lenovo Community !
    There is no setting that I am aware of in Windows or the system BIOS to adjust the keyboard sensitivity on your model.  Is it certain keys or is the whole keyboard like this ?  Was it always like this or is the problem getting worse ?  If the keyboard was always like this even when the laptop was new, it could just be the way this keyboard responds to key presses.
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Keys are not very responsive

    I just bought it and hve only Windows on it and have added facebook. I have found it very slow on the internet and that the keyboard needs a lot of pressure to type.

    Dear Customer, Welcome and Thank you for posting your query on HP Support Forum It looks like you are having issues with the Keyboard on your Notebook.We will surely assist you with this. Let’s start with a questions:1. Was there any liquid split on the Notebook Keyboard2. Is there any Dust settled on the Notebook Keyboard3. Are there any Keys which are fallen off / Any Keys which are loose Troubleshooting: Step 01. Click on the Start Button and go to Control PanelStep 02. Open the Device Manager and expand the Keyboard from the listStep 03. Right click on Standard PS/2 Keyboard and click on UninstallNote: This driver will get installed again automatically on your NotebookStep 04. Please turn OFF the NotebookStep 05. Un-plug the Power/AC Adapter and also remove the Battery tooStep 06. Press and Hold the Power Button of the Notebook for a full minuteStep 07. Now let's re-insert the battery back in and plug back the Power/AC AdapterStep 08. Start the Notebook and keep tapping F10 Key during the startup to access the BIOSStep 09. Once you get to the BIOS, Please press F9 or F5 Key[Model specific] to load setup defaults for the BIOSStep 10. Use the arrow keys to say "YES" and hit enterStep 11. Now let's press Esc/Escape Key. Save Changes and Exit - YesStep 11. Now please wait till the Unit loads the Windows Operating system If the issue still persists please check and verify if an External Keyboard works fine with your Notebook Note: Please click on the below shown link to find more troubleshooting stepshttp://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc=en&product=5442782 Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • Photoshop CC2014 is not very responsive in easy tasks

    Hello,
    On my computer, Photoshop CC 2014 responds very slowly to the reaction of the cursor. More specifically, for example, when the cursor presses the top menu, the program slows down. Also navigate in the pallet layer is not smooth. It is very bad at work! In Photoshop CS5 and CC everything works normally and quickly.
    Does anyone have a similar problem?
    I have Windows 7 Pro 64-bit, NVidia Quadro 3000M

    Sorry if Ihave stepped anyone too close.
    But I suggest me now since the update so around and trying to figure out what it is. The only thing I always get to hear, try the airflow to change or have you tried the settings and then really closed Photoshop ... blah blah. I have to explain every time that I'm not stupid and I've also used Photoshop before and I did not work the first time with Photoshop.

  • IPhone 4 very slow and not very responsive

    Hello - ever since updating to ios5 my phone has been significantly slower. I close my open apps regularly and don't have a crazy amount (about 6 pages worth) but the phone is just very slow. For example, if I get a text message and go to open it, and then try to click in the text box to start typing, nothing happens. It takes a good 6-8 seconds before the phone even recognizes me touching the text bar which is incredibly annoying. The camera is often slow too, having a shutter lag of 10 seconds sometimes. I would wipe my phone and do a restore, but I think that will just restore all of my backed up data which will probably not work, and I really would not want to start from scratch and lose all of my 4 years of text message history, etc. Any ideas?

    Very few apps run in the background since there is no reason or benefit for nearly all apps to do so. The overhwelming majority of apps are quit or suspended with leaving the app. An app being available in the recently used apps bar or dock does not mean the app is running in the background, and removing apps not running in the background from the recently used apps bar or dock doesn't accomplish much if anything.
    How often do you power your iPhone off and on?
    Try a reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    If no change after this, try restoring your iPhone with iTunes as a new iPhone or not from the backup to see if this makes any difference. If not, you can restore again from the existing backup.

  • My screen is not always responsive when I'm on a call

    Most of the time when I'm on a call my END CALL or END + ANSWER button does not work.  I'll push it over and over again and it just dims & come back like I never pushed it.  I normally have to wait until the other person hangs up before I can click over or end a call.  Has anyone else had this problem?  I don't think my screen is that greasy or dirty.

    Do you have a case on the phone? If so, then try removing the case and see if the phone works correctly with it removed. If it does, then there is something about the case that is blocking the proximity sensor. If it does not, you can try to reset the phone, holding the sleep/wake and home buttons together until you see the Apple logo and then release. See if it works after the phone restarts. If that doesn't help, the next step is a restore, first from a backup and if necessary as a new device. If it still doesn't work properly, then it could be hardware issue and the only way to check is to have Apple examine the phone.

  • My recently repaired ipad2 screen is not fully responsive

    MMy ipad2 screen was recently repaired. But it is now unresponsive in approx 25% of it. Have restarted it, have reset it using lock and home buttons. Any advice?

    In Essex, an org I found on Google. I will send it back Monday if I can't find a fix myself.

  • 3 GS screen not always responsive

    Hi. Just got the 3GS a week ago, and i've noticed that when i touch the screen, its not always responsive. Some times i have to touch it several times to get it to work.
    any one have this issue?
    thanks

    Hi. I was having the same issue. I took my phone to the genius bar (apple store) and they tightened one of the cables inside the phone. They guy told me that apple has seen some phones that have a loose cable inside and its a quick 2 minute fix. Since I went to the apple store and they did the reconnecting, I haven't had that problem

  • Clickwheel not very sensitive when using skins - ipod Classic 160GB

    Hello,
    When using a silicone skin with the ipod classic 160GB, the respone of the clickwheel is sluggish/non-responsive. When no skin is used, the response from the clickwheel is OK, maybe a bit slow.
    I've tried two different skins and have the same problem. The same skins with the previous 5.5g ipod Video had no such issues.
    Perhaps there is some way in the firmware to make the clickwheel just a bit more sensitive to the touch?
    Thank you,
    Paul

    "Not very responsive" ?!?!
    No response at all if I reuse my 5G silicone skin!?
    With a new Belkin skin specially made for Classic - of which the skin on top of clickwheel is indeed a tad thinner - it responds sometimes, but mostly also not at all (irradically)!?
    Even if the design has changed, I would expect Apple and 3rd party skin suppliers like Belkin to at least test their products for compatibility thoroughly. This really is sluggish R&D, substandard to Apple's reputation!
    Anyway, I'd also cut the clickwheel part out of the skin with a Stanley knife. It's not protected but at least responsive...

  • I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

    I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
    iPad, iOS 7.0.4

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for