Onbehalfof element in ws-trust

Hi All,
I am not sure I am in the right place posting my question. Please direct me if this is not the right place.
I am evaluating Oracle STS for implementing ws-trust for token exchange
My scenario is as below
client ------------sends a msg with a username and signed by it's own cert---------->Gateway---------RST onBehalfOf client-------->STS
Here is the use case:
Client owns several users. It sends a message to Gateway with a unername credential signed by it's private key to Gateway
Gateway validates the incoming signature and generates a RST to get a SAML token
Gateway embeds client's key with RST message.
STS validates Gateway's key to establish a trust request
STS validates certifiacte embedded inside the onBehalfOf key as a proof that it indeed came from the client
STS finds the username to generate SAML token for the user?
Question is how would we provide info to STS to look into some other part of the message to find username to generate SAML token instead of using subject provided in the cerificate in OnBehalfOf element?
Thank you in advance!

Hi,
On the recieving side you use a Receive activity and a variable to store the header. The inbound header can be caught by using the Header Variable on the Adapters tab.
Kind regards,
H
PS sorry for the late reply; I did not receive an email notification

Similar Messages

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

Is there a way of determining what element in an array is being clicked on?

Hi all. I would like to setup an event to determine what element in an array is being clicked on/hovered over. I think I tried this before and found it wasn't working due to limitations of LV 7.0. If this code already exists, it would be great if I don't have to do a scavenger hunt for the solution.
I think one possibility I nixed was to use the refnum of the elements to determine which one it is. IIRC, this is not possible because the refnum of the element is for the edit box only.
The second possiblity is to get the on click event, and somehow determine which element in the array it is. This doesn't sound too difficult as it should be a simple calculation, but may get in to some hairryness based on if the indicies are visible or not, and if I am using a new or old array with new or old control (calc would change based on boarder size of the controls). I might just simplify it by removing indicies and using older control set which has minimal boarder size.
And just for fun, can I force a tool tip to show up?
Thanks all,
A
Using LV7.0 on WinXP.

blawson wrote:
Been bitten by LabVIEW wrote:
I think one possibility I nixed was to use the refnum of the elements to determine which one it is. IIRC, this is not possible because the refnum of the element is for the edit box only.
Using LV7.0 on WinXP.
This is indeed possible, at least in the newer versions I use.
Take the array refnum from the click event data terminal and get a reference to the array element. This refers to the element that was clicked, but you do need to work out how to get the index. My method is to use property nodes to get the screen position and size of the element and the screen position and size of the array, as well as the array's Visible Index property. For each direction, take the quotient of the relative position of the element (account for padding!) over the size of an element.
I suspect that taking the mouse coords and comparing to the array's sizes in pixels is similar, although I trust my method for events that don't have mouseclicks (what coords does Array:shortcut menu selection(User) return if you used the keyboard?)
Here's an old version I happened to have open. I've posted about this before, I suspect I have a clearer version in my gallery. I use this method in my example code contest entry to work out which square of the chessboard is clicked.
Thank you for that one!
I am currently "locked up behind a down-rev fence" (working an old app in an old version) so I had not heard of that.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

What a disgrace Adobe with Photoshop Elements 13

I brought Adobe Photoshop Elements 13 trusting the garbage Adobe went on about it only to find you go and install it and it won't get pass Payloads Adobe Elements 13 Organizer it just fails as a small business I ended up trying to install it on 4 different computer using Windows 8 and 8.1 64 bit and nope the same thing happens I even trying installing the 32 bit program same thing you can not get pass Payloads Adobe Elements 13 Organizer as far as customer support it appears there is none you can't contact anyone at Adobe to get you money back they just don't care. I have gone back to using my old version Adobe Photoshop Elements 11 it works and no issues. I recommend no one buys Adobe Photoshop Elements 13 until Adobe fixes the issues and most of all provide the customers proper support. I wont my money back for a software program that is useless and I can't use. They say you have 90 days from time of purchase to request a refund well what a pack of lies that is as you CAN NOT GET ONTO ANYONE AT ADOBE if you do get on to some one they will tell you your 90 days has expired this is that they think of there customers world wide.
I'd rate Adobe 0 = for the program and I'd rate their customer service 0 and never buy another product from them.

I agree with you about the lack of customer support. I was able to install it with no problems but when I wanted to print to one of my printers I had a lot of problems. I can only print to one of the printers and it won't print correctly. I contacted Support and chatted with one of the people. I was told that only the forums take care of Photoshop Elements. I also wish that I had stayed with Photoshop Elements 11. After installing 13 the printer issues are in my photoshop elements 11 program. I certainly would not recommend anyone purchasing an Adobe product because of the lack of support.

Premiere Elements 8 crashes when I try to use it.

This has been an issue for several months now, which I have been unable to find a resolution to. Things to keep in mind are that I am not very computer-savvy, so the fix could be quite simple and I am just missing it.
The problem:
Back in August, I asked my boyfriend to clean off some space on my computer because it was starting to act up sometimes. I know that he deleted some programs that I was not using, but as far as I know, none of them had to do with Premiere Elements 8. But as soon as that happened, I couldn't use it any more.
What happens:
I can open up a new file just fine. I think I can even open an already existing file (it has been a few months since I've tried that). It is when I try to import a video file into the program that it shuts down. My computer remains functioning; other tabs and programs will not be affected, my laptop does not shut down or glitch. It is just Adobe.
What I've tried:
I uninstalled the program twice and re-installed it. That didn't work either time.
I checked to make sure that I still have Quicktime installed. I do, and it is updated.
I made sure I have room on my computer. There isn't a lot, and it is not a fast computer, but then again, it never has been.
I've done all system updates, defragmented my computer, etc. All of the maintenance I can think of.
I searched my problem on this forum and google, but haven't had success finding a case similar enough to mine (possibly due to my inadequate search skills).
What I'm looking for now:
I suspect that there is a program that has been deleted that was important for Premiere Elements 8. However, I cannot figure out what program that might be.
Miscellaneous:
Adobe Reader has also been acting up on my computer. I've reinstalled it several times, but it persists in either working at a snail's pace (15 minutes to open a 500 KB document, which I think is not very big. Again, my computer know-how is lacking), or else not working at all and shutting itself down.
About my computer (I apologize in advance for omitted or extraneous information):
I have an HP laptop, 2 years old. (Model: HP G56 Notebook PC)
It runs on Windows 7, and has an Intel Celeron core.
It has a 64-bit operating system.
My hard drive has 216 GB of space total. 73 GB are free.
I have 3 GB of RAM.
Thank you in advance for any help. I'd really like to get this program working again.

I would start with this FAQ Entry first, if you have not done so yet: http://forums.adobe.com/thread/792580?tstart=0
It starts with a checklist for getting PrE set up properly, then moves into tuning up one's system and OS (you have done a lot of that already), and then goes into troubleshooting tips. Note: those tips rather work up quickly in "degree of difficulty," and DO become quite technical, but things like the "Finding Clues" link will give some tools, that might prove useful, like the use of Windows' Event Viewer to track down issues.
One of the first things to look at would be your video driver. I would go to the video card's/chip's mfgr's. Web site, and check for a later driver. Do not trust Windows, or any utility to tell you if you have the latest driver. If there is not a newer video driver, or it will not install properly on your system, be sure to check with the HP Web site, as HP, Dell, Lenovo, and some other mfgrs. will re-package video drivers to suit their specific setup.
One troubleshooting technique, that might prove useful (however, those deleted programs bother me a bit here), would be to create a System Restore Point for now (see Windows Help for doing this with your particular OS version). Then, boot to Safe Mode, and choose an older System Restore Point, from when things did work. This might take some trial-and-error, to get back far enough. Test. At the worst, you will only have lost a few minutes, as you have your new System Restore Point for now, to fall back on.
Good luck,
Hunt

Adobe Premiere Elements 0.9 project crash, HELP!

This is the first time I am using these forums, so I hope I posted this in the right sektions.
I need help and solutions for a Project which constantly crashes on my Adobe Premiere Elements 0.9. This program has been awesome and helped me create some projects and videos successfully, up until.... well for about 3 days ago when my latest project crashed when I had just antered and checking the storyboard etc, triggering a "Serious Error" message and then it shuts down. I try again and again, but everytime I try to put something (any sound or video etc) on the storyboard and start working etc the same damn "Serious Error" message and then allways shuts down. It's allways this same and only project (which has worked fine before) that crashes like this...
In an attempt to first solve the problem myself I went through the Premiere Elements 9 files and deleted finnished projects and automatic saved process on projects etc, but still won't work even better... The funny thing is that when I open another project (a finnished project I left saved just in case) and go through the storyboard there and messes around a little and such, it won't crash nor trigger the same message as my latest project. And that program even has some effects on every footageclip on it too, but still it works fine. Haven't touched the program or the program until and since yesterday night to give it some rest but it still won't work, the project just keeps crashing like when and since it first started a few days ago.
I have also read through and tried some things from this Help/Troubleshoot page:
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html
I have so far been doing 1 and 2 of the "Beginning Troubleshooting", otherwise I have been reading it all and such. I am also kinda afraid to do the 3 of the first quests because I worked so hard on this project and even tough it just keeps crushing, I'm afraid to lose it. Other, I have deleted audios and such from my filegallery on my Adobe Premiere Eements, stuff I don't need anymore because its projects are already done. After I did that I also tried to create a new project just for testing. The amazing this about this is that this the new created project I created works just fine, I could do all kinds of the stuff, effects and advanced editing which I did on the same project before it started crushing. Tough I didn't save that test-project since I didn't find a reason to since it worked so good. And so the thing is that I can start and create a new project and start working and do usual stuff on it with no problem, same when I open up another project and do stuff, it all works just fine! It is just this one and only project that keeps crushing with this "Serious Error" message, all the time... Does anybody else have, or has had the same problem? What could the problem and error be and how to fix it?
This crushing project do has some effects on every footageclip/videoclip on it, to set the right mood for the musicvideo I'm making. I am making a musicvideo, and I haven't even done the half of the project/video. The song I am making this musicvideo with is about 00:07:32 in length, and (tough this detail may have no influence or meaning) the music is Symphonic Metal. The actual file of the song is 6,96 MB in size. This is also not the first time I've done such projects with such long songs on this same program either, one of my last videos I managed to successfully make and create a musicvideo with a song which was about 13 minutes and 30 seconds in length, and I also used effects on pretty much every videoclip on that project too.
The current filesize so far on the actual project.prel-file of my project that keeps crushing is 9.73 MB.
I am also using Adobe Premiere Elements and doing this troubleing, crashing project on a PC, a Fujitsu Windows (I believe Windows 7, or even updated to a newer version?). It has a regular ATI-card. The computer also has 2 modems and there's still some pretty GB amount free on them. The PC's main system also has a RAM in 6.00 GB and the operative system is the 64-bites.
In short, the PC should just fine be able to handle Adobe Premiere Elements 0.9 and all its projects, just as it has handled it all before plus all my PC games at that. So it must be something with my Adobe Premiere Elements and that specific project which is the problem, but what is the problem and the serious error and how to fix it?
Could it help to save and create the actual video in this crashing project, delete that project then start a new project, upload and put in the videofile of the crashing project in that new project and then continue from there?
In either cases, I need help with this. Please, help!

Thanks so much for your reply, Steve!
Even tough I trust you guys enough here on the official Adobe site/forums to answer those questions as best I can, I am at the same time not very fond of giving away too much information because of safety. I understand I have to If I'm to recieve the accurate answers and solution, but as this is the internet you can never know. But again, I trust you guys enough on here and thus I'll try to answer those questions as best I can, even tough I am not very good with such stuff about computers. The PC I am using is also not only mine, it is the family computer also which me and my whole family uses.
The operating system on my computer (according to the computer propotions etc) is a 64-bites operating system and the computer/PC is also a Windows 7 Home Premium.
The processor the computer/PC have is a Intel(R) Core(TM) i5 CPU and the RAM is 6.00 GB. However, (and I hope I make this understandable because the computer/PC is in swedish)the subscore of RAM in the computer's Performance-Classification/Ranking is 7,5. The processor subscore is 7,3 per second. And the free space? Well, we have two modems, let's say a modem A and a modem B. Adobe Premiere Elements 0.9 is set to save all its stuff etc on modem B, while modem A is the main modem and spaces all main stuff and other things of the computer/PC. Modem A has about 314 GB of free space, while modem B has 207 GB of free space. Modem A's capacity is a total of 489 GB in which 175 GB has been used, the modems filesystem is a NTFS. Modem B is also a NTFS filesystem and its capacity is a total of 439 GB in which 232 GB has been used. And the Disk Cleanup? I believe my that latest ran it for about a few weeks ago. We also have a CCleaner also. But about the Disk Defragmenter, I have no idea. What exactly does a Disk Defragmenter do?
You mean, entering my project that keeps crushing and simply rename it by using "Save As"? If that is what you mean, I dunnow If that actually worked. When I still tried to do stuff and edit the crashing project (tough as said, it hardly took any changes and process before it triggered that message) and then crashed and shut down, and I opened up the program again (trying to open the same project that way), it asked me If I wanted to re-create the missing process from the last crash of the same project. I tried it and it automaticly was renamed to a for example Project.copy. But when I tried to work with that it was to no futher success, the project kept crashing. I haven't renamed the project by "Save As" tough, but I doubt it'll work, I even tried to rename the actual project file in the Adobe Premiere Elements files but nope... the project keeps crashing. But also about the same question, "Save As" under a new name but in its own folder? You mean the actual project folder or Adobe Premiere Elements preview folder of the projects?
My camcorder is pretty old by now, have had it since I turned 15, it has worked pretty good since then. Its model is a Sony Handycam, Carl Zeiss Vario-Tessar OPTICAL 20x. Even tough the last thing maybe doesn't say anything, this is all I know about my camcorder, except that it is a model no. DCR-HC17E PAL. But in that Project which keeps crashing, there are only a few actual camcorder clips used as I am making a Game-MusicVideo and most of the footage of the Video-game (actually a PC game) I'm making a musicvideo of is downloaded from Youtube mostly from a guy I asked permission for to download his recorded footage of the game. I used a Youtube downloader called ClipConverter. As I don't have a SD card I cannot make this footage myself. But some footage I recorded on my camcorder, but If I can find high quality clips and get them, I will. The other footages is actual official trailers of the PC games which also was downloaded from the net. But I can give you the stuffs filetypes and hoping that may help. The downloaded footage which was downloaded by this ClipConverter, are MP4 files. The other stuff (which were official trailers) and most of them are also MP4 files, the others are QuickTime-film files. Many of these downloaded footages and trailers are also in HD quality, at least some of them I think.
The actual filetype ofthe footage I myself recorded with my camcorder are, well.... it says Videoclip in the file. Maybe it is AVI?
The project settings? You mean the settings you set at first when starting as a new project? The general settings are, in editingsettings it is AVCHD 270p square pixel. This is kinda hard for me to tell since everything is in swedish in my program. But these settings has worked perfectly before, same with all files, footages and videoclips I have been using, also all the soundfiles etc. Even the actual crashing project worked perfectly before it started crashing... So why does it so suddenly start crashing now?
The audio is a song I copied directly from its album and CD into the computer/PC and it seems to be in WMA format in filetype.
And lastly, no I haven't rendered the timeline of the project ever, not even on my other projects. What does the rendering do and is useful for? I have very little knowledge of it. Other, I keep the Timeline mode open all the time because I can edit my videos much better with it, but perhaps that editing method make little influence of the actual problem.
Other, yesterday when writing the post and topic, I forgot to mention that I restarded my computer right after I created a new project, that testing project. When finnished with the testing I restarted the computer. Since then I haven't touched the crashing project since now tonight, when checking its settings for this post. I am also right now trying to create and save the actual videofile of it, saving it on my computer. I'll soon see If it's successful without any crashing interruptions, plus that the video itself works and is smooth when I'll play it on Windows Media Player like all the rest of my other videos. I do this just in case I must create a new project to be able to continue with my musicvideo, as the first part of it I worked very hard on.
Other and again, I am still puzzled about why this is even happening, that this project which worked perfectly fine before, just suddenly starts triggering that "Serious Error" message and crashes. And in this program which worked so perfect before. Has this happened to anyone else before? Has anyone else experienced the same issue I have? Is this a knowledgable issue which has solutions and ways to fix it?... :/

Adobe Premire Elements 7.0 Error

I haven't had many problems with Adobe Premire Elements 7.0, but now, after three days of work on a project that has actually turned out really well, it has turned against me. I can't export the video as a video file. I click File>Export>Movie and have enough memory for it. When I click save, it starts to export. It goes well for a while, saying it will only take ten minuites or so.But then it starts to slow down, and eventually reads that it will take an hour. >.<" So I wait patiently until eventually an error pops up after my hoes get higher when it starts to load faster. The error always pops up around when it's 10% complete. It says, "Error. Unknown error occured when compiling the video" or something. Ever since I got it, using the 'Share' tab has only resulted in the closing of the program, so I can't try that.Please help! I'm running it on a Windows XP.

Tell us all about your I/O sub-system, especially your hard drive (HDD) setup. Do list the free defragmented space on each HDD.
This sounds like a disk space problem. Trust me, you need far, far more free, defragmented HDD space, that it would seem to be required.
Good luck,
Hunt

"Sorry, a serious error has occurred that requires Premiere Elements to be shut down. We will attemp

I have been getting this message just a few nights ago after working on a project. Premiere was working at first for a few days but then this happened. Now everytime I try to activate the program it displays "Sorry, a serious error has occurred that requires Premiere Elements to be shut down. We will attempt to save your current project".
I have tried uninstalling and reinstalling premiere 3.0 but that didn't help. WILL SOMEONE PLEASE HELP ME HERE!!!!!!!!!!!!!!
My computer is a Dell Dimension Desktop running on Windows XP with 256 MB of RAM

There are a couple of similar threads, so I will post my solution to you also. This worked when I had the same problem.
I have found a couple of steps for a solutions that worked for the "encountered serious error" message when attempting to share the project to disk or computer file. Here was my solution that worked.
1. I already compiled a project that took me 2 months and used video, photo, music. I added a new video track 'before' the other tracks and inserted a black jpg image, stretch it the entire timeline and make the opacity 0%. This covers any unseen 'gaps' in the project and won't interfere or cover anything else in the project.
2. Go to file - project archiver - copy project to a new folder away from the current folder (this will include a copy of all media used in the timeline of the project - trust me it's worth the duplication!).
3. Go to preferences - clear your media cache. Close the program.
4. Hold down the left ctrl + shift and then click on the Premiere program icon. Keep holding the ctrl + shift until the welcome screen for Premiere appears.
5. Open the new *.prel project you had saved in the new folder in step 2.
6. Go to share and make your disk or computer file.
After trying all the recommendations of the various posts, this is what I found that worked (I didn't find step 2 in a post but was just trying to back up the work I did and found that it created a new *.prel file!). For some reason, when previously trying to share the project with the original *.Prel file, it didn't like having all the media in different folders from the project, even if they were a in a sub-folder within the project folder. It wanted all the media in the SAME FOLDER as the project.
I just now have a new error that I can't find the solution for in support or the forum yet. But that's another post.
I hope this helps someone else!

How can I get my 'Transitions' to load in my new Premiere Elements 10?

I just got Adobe Premiere Elements 10 and cannot get the transitions to load. Everything else in the Edit tab works fine, but when I click on Transitions it just says it's loading ... forever ... or will crash the program & close. Is anyone else having this problem? How can I fix this? Any help would be greatly appreciated. Thanks! I have an HP Pavilion dv7-426 cl Entertainment PC if that helps with anything...

Welcome to the forum.
It appears that you are most likely having a GUI display issue. Many/most of the Transition thumbnails are animated, so require some horsepower. Also, PrE relies heavily on the video card's/chip's driver.
I would update the video driver, to the very latest from the mfgr. Do not trust Windows, or any utilities to tell you if you have the latest. Check the mfgr's. Web site. Note: if you have a Dell, Lenovo, HP, Toshiba, or another major computer mfgr's machine, check out their Web site first, as many such mfgrs. will tweak the video drivers for their machines.
Good luck, and hope that helps,
Hunt

Automatic creation of cost elements

Dear All,
The automtic creation of cost elements functionality is not working for some GL accounts in production. When new GL accounts are created, the same are not created as cost elements. All the standard settings viz 'selection of automatic creation' in controlling area configuration, creation of number ranges in OKB2 etc are in place. We posted in OSS and they are not able to find reasons why this is happening.
Has anyone faced a situation like this? Please post your valuable thoughts and share your inputs. We currently have a log created by user on this and pending for quite sometime.
Thanks in advance
Venkatesh

Hi,
Yes. We do face problem like this often. We wriggle out by updating through manually when we are very nearer to go-live date. Otherwise, we can create an abap program and meet the deficiency.
Trust this helps much!
Cheers!

Elements 8 on Windows 8.1: Backup throws Error

My trusted Photoshop Elements 8 and Elements Organizer with a catalog of 38,566 photos lives on a Windows 8.1 machine, all updates current.
When trying to make a full backup to an external hard disk, it writes 65,426 files before throwing a simple error (German, along the lines of "there was an error writing data") and exiting. Of the created backup, 31,562 files are JPGs, the rest are XMP and XML, and finally one catalog.buc is created. There is no backup.tly (I assume that would be the file to confirm a backup is complete). The JPGs date from the past to 2011 (the originals go up into the present). The error is reproducible.
I tried repairing and optimizing the catalog, all elements are connected. The catalog itself works nicely.
What to do? Living without a backup seems risky, so I need a solution.

Found the issue: it had to do with NTFS security properties. Part of my pictures directories was on an old hard disk, inherited from a previous Windows installation, and my current account wasn't the owner of those pictures. Apparently Elements Organizer stumbled over those rights issues (though it could read them alright, but that wasn't enough, it thought). Reclaimed ownership of all my pictures, and the backup ran through successfully.

I have a visual C runtime error stopping my pse elements 10 running in win 8.1. I am not a techie so am looking for a very clear way to resolve teh issue without needing too much technical ability. Can anyone help?

I had been using my elements 10 for much of the day so do not know what I have done to upset it! I was starting up again and it began to load then offered me this line of script re a 'runtime error'. That means nothing to me except that it no longer works. I have had a peek on Google and see various suggested fixes from sources I don't know whether to trust. Also some fixes give a list of do's that to a non techie like me are not followable. Can anyone offer me some understandable guidance so I can get back to playing with my photos?

You'll need to ask in the Photoshop Elements forum whose members can better answer this.
Photoshop Elements
Also keep a brief summary in the subject line and use the main posting window to describe your issue in detail.
Subject: Visual C runtime error as an example.

Problems with Premiere Elements 12

I've been using Adobe's "Elements" applications since Vs 3.0. Each release seems to include undocumented features that cause problems, and don't get fixed until a next major release, for which we are charged a tidy sum.
"Premiere 12" and its associated "Organizer" are no exceptions. Background:
1. FINALLY am running a new PC considering I'm using AVCHD "m2ts" file formats generated by Sony HD Camcorder, for which previous PC and versions of Adobe Premiere Elements (8, 10, etc.) were fairly sluggish with their performance. New PC: Windows 8.1, 32GB RAM, >7TB HDD space, Intel i7 CPU, GIGABYTE MB, NVIDIA GeForec GTX 770 Video Adapter...plenty of computing power!
2. Installed Photoshop/Premiere Elements/Organizer on C: drive, default locations.
3. Experienced following problems, for which several have been kind enough to offer suggestions for repair, but none so far have worked.
     a. When adding "text" captions, after a few have been created the control panel for text loses contact with the "Style" and "Effects" modules, making these capabilities non-functional.
     b. When creating menus for discs, the DVD menu navigation operates correctly, but the Blu-ray menus do not. The "Stop" markers, while functional for DVDs, are not functional for Blu-ray discs. When a video is played that encounters a "stop" marker with a DVD build, the end action is properly realized with the main menu then making a reappearance, allowing one to make the next choice. When a video is played through to encounter a "stop" marker with a Blu-ray build, the video does NOT return to the main menu, but rather continues playing into the 2nd movie (or beyond) until it reaches the absolute end of content on the disc...at which time we are then returned to the main menu. Finally reading the manual, it indicates that this is a problem! FIX!?
     c. "Organizer," which works with both Premiere and Photoshop Elements, is highly unstable when working with AVCHD files, while it performs "normally" with still images (photos, etc.). I have over 4,000 AVCHD (m2ts) video clips that I was attempting to bring into Organizer. My first attempt was to let Organizer "see" all of the files and to "bring them into" its catalog. However, after a short period of time, with less than 100 or so video clips identified and thumbnailed, Organizer either stops working and hangs, or crashes totally. I found that to get these 4,000 files into Organizer I had to manually pick around 50 or so files at a time, which Organizer seems able to begin its "first stage" of identifying, creates "placeholders" in the Organizer's screen, then crashes or hangs. At that point, I must restart Organizer, which will then continue on to successfully build thumbnails. This process was repeated until all 4,000+ files were recognized and ID'd. Regarding this issue: I just updated my "Nero" to "Nero 2014 Platinum," which comes with its own "Organizer" or "Media Manager." it is VERY similar in nature to Adobe's "Organizer," with one major difference...IT WORKS! Nero's manager imported not only the 4,000+ AVCHD files into its catalog, but rumaged around my entire system finding photos and video files I'd long since forgotten about! I've not yet used the new Nero video editing/production tools, but won't be surprized if I find that all works equally as well.
Not having any "fixes" for these problems, I find I am forced to use other applications (Vegas 12, Pinnacle 17, or perhaps now "Nero" as well) to get on with our production work. Note: I had been using Adobe Premiere 6.0, then CS-4, for a while but with changes in OSs found that these products as well evolved with issues of their own. Not going to spend the big bucks to purchase more expensive problems that don't otherwise get addressed without spending even more $$$ for the next major updates!
Help?
George

Bill;
YES! It WAS Sonic that I’d suspicioned was at the core of these issues in the past. I’d run into problems a few years ago with various versions of “Creator,” “Roxio,” etc. as well as another similar products, and found “Sonic” to be the common denominator with all similar problems. I had NO idea that Adobe had also chosen to implement a 3rd party’s product (Sonic) as part of their offerings! Well, that says a lot!
Also did NOT know that Sonic had been sold off to Rovi! Searching the internet…shows this was a big deal back in 2010! Hadn’t been following these things! Looks like Rovi is out to capture the world…would be a nefarious event indeed if they fail to maintain what Sonic has sold to various entities which have incorporated their modules into the various products we continue to own and purchase today!
I don’t know which cave or rock that Rovi’s been living under, or which marketing outfit they’d signed up with that provided the evaluation that Rovi appears to be reacting to, but we at least are still engaged in sending off videos around the world via DVD/Blu-ray media (and on rare occasions, VHS tape!). Their assessment that delivery of video by physical disc is dead is either wishful thinking or badly mistaken in my opinion. Try, worst case, supplying a video to a person living on an island off of Queensland, Australia, for example, who has NO internet connectivity!
I know that streaming is a big deal (Netflix, etc.), and that the new buzzword “Cloud” has taken over a lot of the computing world’s philosophy of late…but neither of these “new” ideas are implemented to the extent they would like to believe…and are the domain of mostly “new” users living in areas where these technologies are available. They are cutting off a vast number of video watchers who employ neither of these technologies nor have access to them, who, believe it or not, are still using VHS video tape, DVDs, and/or Blu-ray media to watch videos! The relatively small percentage of individuals who use (can afford, or have access to) either streaming or the cloud does not justify not taking care of business and dropping support for all these products that implement their procured technologies.
I for one have great/fast access to the Internet (50Mbps +), but really am not of the mindset that I trust uploading/saving critical data to the “Cloud,” and do not do so…even though Microsoft’s latest “Window 8.1” and several other procured applications provide plenty of opportunity to do so! I think the latest stories re Hacking proves this point…and I have experienced the loss of stored data (websites) over the years via professional website hosting facilities to the point where I know I don’t yet trust the “cloud” to be the repository of my data either…a service which cannot guarantee either the presence or security of data!
I do also enjoy Netflix’s streaming technology…even though there are occasions whereby a movie is interrupted to buffer additional video data. Sometimes much more frequently than I would appreciate! So…streaming is also not the end all of video watching either! OK…I have rented a DVD or two in the past from Netflix which had been scratched or badly handled, which also provided aggravation as well!
So long as the industry continues to sell the technology of the day to us consumers who invest in their products, and so long as industry will do what they do best…to continue refining and upgrading capabilities, they must also continue to provide the “cross over” technologies, the continued support that would span at least a few generations of video products that will allow us to continue viewing videos obtained at an earlier time. Right now we see VHS tape is already at its end of life usefulness…and yet there remains support for converting such media. We also see the vast majority of products purporting to support DVD and Blu-ray builds…the latest of video products…and yet, the underpinnings of these applications appears to be diminishing already…
Thanks so much for the feedback and update and the opportunity to vent! Do we know how Adobe is/will be reacting to these events? Will they spend the bucks to come up with their own code to replace that which is not supported any longer by 3rd parties?
George

Why must I have Internet access and be logged into Adobe to use Photoshop Elements?

I can not use Adobe Photoshop Elements 13 unless I have Internet access and log into an Adobe account. Why? This means you can't install the software on a laptop and use it while traveling unless you have 100% Internet access throughout your trip. What a load of ....... Why is this? I there a way around it?
Any advice appreciated.

Thanks Barbara. I tested it (trust but verify ) and that is the case. I must have been logging out, and thus deactivating, in my earlier testing. I agree, bad choice of words or phrasing by Adobe. Thanks again.
S

HP Deskjet 9650 with Photoshop Elements 7 and Windows 7 not printing

I have a new Windows 7 computer and installed Photoshop Elements 7.0 on it, which works fine, except I cannot print. I did the installation instructions to use the alternate driver 9800 and can print 8 1/2 X 11 Word documents, but I cannot print a 12X12 scrapbook page to save my soul. The resume print button keeps blinking and it spits it out blank. Any help?
I hope I do not have to get a new large format printer.

I just accomplished this without any real problems and am now running with my same license on the newly rebuilt PC. Here is what I did ...
Originally my PSE7 configuration was set up last year on new Intel I7-based PC running Vista 64 bit version with a retail copy of the PSE7 software, i.e. not the upgrade version. Once that was setup I imported my catalog from the older Adobe Photoshop Album on my previous system. That put me at the place you are now, i.e. PSE7 on Windows Vista.
For this upgrade I puchased the upgrade version of Windows 7 and an additional second disk drive. I installed Windows 7 onto the clean drive, giving me a dual-boot system for either OS. While booted on the Vista drive, I used the easy-transfer method to write a backup of my Vista files to an external disk drive. I then rebooted into the Windows 7 drive and used the Easy-transfer tool to reload the files from the external drive. (note; this easy-transfer included >200GB of music/video/image files so it ran for several hours for each phase of the transfer)
Once I verified the directory structure on the new Windows 7 setup, only then did I do the installation of PSE7. That wnet flawlessly and relicensed without any problems. Next I was able to open up my catalog in organizer and all of the images were intact. Since then I have had no issues with the configuration.
So bottom line is you should be fine doing the upgrade regardless of whether you do the upgrade like I did to a new drive or an in-place upgrade overlaying your vista environment. For the in-place upgrade I would strongly recommend you still do a backup of all of your images and their associated catalog(s) to an external drive. Win7 is a vast improvement over Vista so I'm sure you won't regret the upgrade but I don't trust any vendor's software upgrade procedure, especially Microsoft so please do the backup first.

Onbehalfof element in ws-trust

Similar Messages

Maybe you are looking for