Once RFX response approved the other responses should delete

Hi All,
We have one requirement, Using SRM 7, RFX is sent to 4 bidders, all of them sent the responses, now Buyer has decided to go one of the Bid, once the RFX response is approved all the other responses should get rejected and the notification should sent to them.
Did any one already using this scenrio please help how to proceed.
Regards,

Hi,
Ricardo mentioned correctly.
I've tested this scenario, you need to accept which ever you want and reject remaining bids.
Other wise for the remaining bidders status will be shown as submitted not rejected.
Regards,
Krish

Similar Messages

  • I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    Welcome to Apple Support Communities
    Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one

  • HT1345 I have a new iPodtouch 5th generation.  I currently have a 4th generation.  Is there an easy way to transfer from one to the other or should I start a new setup?

    I have a new iPodtouch 5th generation.  I currently have a 4th generation.  Is there an easy way to transfer from one to the other or should I start a new setup?

    Click here and follow the instructions.
    (95861)

  • TS2771 can i retrieve bbm msgs on my ipod 5 that the other contact has deleted?

    can i retrieve bbm msgs on my ipod 5 that the other contact has deleted?

    What do you mean by " other contact has deleted"?
    If they were on your iPod and you backed up then and not backed up after they deleted then restoring from backup may restore those messages. You would have to check with BB/go to their support site
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • How Do I Backup More Than One Iphone On Itunes Without The Other Backup Been Deleted?

    How Do I Back Up More Than One Iphone On Itunes On The Same Laptop Without Deleting The Old Back Up?
    Thanks

    I believe when you do a backup it deletes the old one.
    \oops ignore my response, didn't see it was for more than one iphone. sorry

  • How can I see the contents of the "Other" folder and delete unwanted files?

    Cleaning up "Other" folder

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • I have two apple devices and i wanna reset one will the other ones data delete too?

    The devices are iPhone 4s and ipad 2

    I'm not sure what you mean by "reset" but you can restore it, erase all content and settings, or reset it by holding the power and home buttons until you see the Apple logo, then releaseing, and it won't effect the data in iCloud or on your other device.

  • I upgraded from elements 10 to 12 it transfered one of my catalogs but not the other

    How do i get a second  catalog transfered from elements 10 to my elements 12 the first one came down with the download

    CD1995 never fear help is here! You may need to cancel and re-add Family Base to get this fixed. Once you do so the following video should be very helpful in getting your Family Base set up correctly right from the start http://vz.to/1zq1bYP . Give this a try and keep us posted!
    BryanS_VZW
    Follow us at Twitter @vzwsupport

  • ITunes for Windows freezes when importing a library. I have a large but not huge library of mostly iTunes purchased music on two authorized computers and would like to sync the files, export the library as a playlist, and import it on the other computer.

    I am running iTunes for Windows 10.2.2 on Windows 7 Home. I have my iTunes library on both this computer and another authorized machine running Windows 7 Professional. I have a large but not enormous library, as I'm one of those people who doesn't pirate, use torrents, borrow from a dozen friends, or whatever other shades of gray you might imagine. It's mostly iTunes purchases with my old CD collection imported. I have started using the following technique to sync my libraries between my two authorized computers, an ability which you can probably all agree should one day be added to iTunes -- that would be different from Home Sharing, because the music would be stored locally and thus available on the road. With the added benefit of the entire library being backed up on the other machine in real-time. Anyway, when I switch from my desktop to laptop and vice versa, I use the following technique:
    Connect both machines to the home network. One machine is the "Active" machine, which has most recently been used for iTunes media, purchases, ratings, etc.
    On the "Active" machine, File-->Library-->Export. Save the file as "Library.xml" on the shared drive of the other machine.
    Right-click "Library.xml" where it's been saved, and open another file that has two lines in it: The root path of the iTunes library on one machine and the root path of the iTunes library on the other machine.
    Do a find/replace all in Notepad to make the library XML file point to where the files will be saved on the "Inactive" machine.
    Run Microsoft SyncToy to synchronize the files between both music libraries; the most recent files win. This avoids copying the entire multi-gigabyte library over the network.
    Open iTunes on the "Inactive" machine.
    Go to Music, Select All, Delete. Keep files.
    Do the same for Movies, Music Videos.
    Go down to Playlists, select the top one, hold down the delete button until they're all gone.
    File-->Library-->Import Playlist. Choose the "Library.xml" file you saved.
    First a status bar comes up that says, "Importing library." It has the continually-scrolling progress bar, not the one that starts on the left and steadily creeps right. Then after about 30 seconds, that clears out. Wait. Typically a few minutes. Eventually a status bar will pop up saying something like, "Evaluating gapless playback information," or something like that.
    The "Inactive" computer is now the "Active" computer. I can now play my library, it has all my playlists and metadata from the other machine.
    Delete all the duplicate playlists named "Music," "Genius," "Purchased," and "iTunes DJ."
    Well, I just upgraded to iTunes 10.2.2 a few days ago and tried to do this again like I've done it dozens of times before. Now, iTunes just goes unresponsive after the library import. It got through the "Importing library" bar to the long wait and stopped. I can still multiprocess and use other programs, but iTunes is hovering back there not responding to clicks. Task Manager doesn't seem to think iTunes is using my CPU, and I don't see my hard drive rattling. Any thoughts on why iTunes might hang up when importing a large library?
    ... Also, please help lobby Apple to come up with a network sync tool built into iTunes for a user with multiple authorized computers. Something different than Home Sharing so I can pull my laptop off the network and still have the synced library with me. And all my metadata changes will sync. The technique I use seems a little kludgey, don't you think?

    iTunes isn't an editor. You need an app that's intended for editing audio files, like Adobe Audition (http://www.adobe.com/products/audition.html) or Audacity (free in the App Store).

  • Why does Photoshop display colors differently from the other applications even in sRGB mode ?

    Hello all !
    Here is my problem :
    Photoshop is set to use sRGB workspace (in edit/colors.../workspace/RVB).
    If I understand correctly this is how all native windows applications work.
    This means Photoshop and the other applications should display the same colors on a file with a sRGB profile.
    Now this is the case until I calibrate my monitor.
    When I do, Photoshop colors become different from the other applications (irfanview, explorer, browsers...).
    The only way I found to let everything display the same colors is to set Photoshop to use Proofing/RVB Monitor.
    What upsets me even more is that Photoshop colors look "better" to me (dark grays seem to dark to me in the other applications.)
    I have read that this is because Photoshop takes the new profile into account and others applications do not. But I don't think this is relevant here because everything is in sRGB so the only profile is my monitor's and I think calibration is handled globally by windows : everything (including browsers, explorer, and Photoshop) changes color if I choose to apply the monitor's profile or not with windows color management tool ("use my parameters for this device").
    Here is my system configuration :
    - Photoshop CS4 (11.0.2)
    - Windows 7 64 bits
    - HP ZR2440W and DELL 2209WA (these are not wide gamut screens)
    I have spent two days trying to figure the logics behind this and really am upset. Any help would be greatly appreciated. Don't hesitate to ask me if there is something that is unclear or some information I forgot to mention.
    Thanks in advance,
    Yannick

    That sounds like an invitation to continue to talk about the issue.  Fair enough.
    I'm not sure where you're getting "insecurity"...  I am just trying to help you help others more effectively.
    I invite you to re-read just the first sentence of what you wrote very carefully, putting yourself in the shoes of someone struggling with both the terminology and the concepts:
    Photoshop (CMS) reads an embedded ICC profile and CONVERTS it to the custom monitor profile for a theoretical 'true color' display
    Think about what "Photoshop (CMS)" might mean to a person who doesn't know the acronym might stand for "Color Management System" (which is I assume what you meant).  Adobe themselves don't call it "CMS", they use the acronym "CMM" (Color Management Module).  The term "CMS" is used in the computer industry for about a dozen different things.
    While a color profile might have been embedded in an image file before it was opened by Photoshop, Photoshop works on documents.  A profile is not "embedded" in a document, it is maintained by Photoshop with the document and describes the color values in the document.  If Photoshop opens a document without an embedded profile, depending on settings and user choices it might assign a profile or it might even operate on the document without color-management.  Oversimplification doesn't help people when they're trying to learn new things unless it's described as such, for example, "This is a bit of an oversimplification..." or "Generally speaking..."
    Not every monitor profile is a "custom monitor profile".  Quite often a standard profile (e.g., sRGB IEC61966-2.1) is associated with a monitor by the operating system as a default, or a factory profile is installed by a driver package or system update.  Your use of the term "custom" is a bit ambiguous and could be read as implying the creation of a profile using a calibration and profiling device specific to the particular monitor.
    Photoshop's color management code does not convert an embedded ICC profile at all (read carefully what you wrote).  As I said, it transforms color values.  That was the key error in your description that prompted me to comment.
    If ever there is a time to pick words carefully, it's in a color-management discussion.
    -Noel

  • Can't get migration assistant to find the other computer

    Tried to use Migration Assistant, but its help is pretty skimpy. Regardless of options chosen, neither computer could find the other. Should both computers be on with MA, or first one then the other? Really couldn't find any protocol.
    They do have different account names and passwords, is that the issue?
    G5 to G5 connected by firewire, tried working from either end, old to new, new to old neither way does the other computer get "found".

    After connecting the two computers by FireWire cable you must boot one (the old one) into Target Disk Mode. Then boot the other normally. The "old" computer's disk drive should appear on the "new" computer's Desktop. You may then us Migration Assistant to transfer from old to new.
    Your new computer's user account that you created will need to have a different short name than the one you plan to import via MA as MA will not overwrite an existing account. If this is no longer feasible then consider moving your data manually.
    Folders You Can Move to Your new Mac
    From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    For FireFox:
    /Home/Library/Applications Support/FireFox
    /Home/Library/Preferences/org.mozilla.firefox.plist
    Credit goes Macjack for this information.

  • Why after updating to ios 7 on iphone 4g do I have 2 facebook icons?  Only one works.  How do I get rid of the other one?

    I recently update to the new ios 7 software on iphone 4.  Now I have 2 app icons for facebook.  Only one works and opens facebook.  How do I get rid of the other?  Tried deleting it out the old way but it has no "x" to take it out with?

    okay never mind.  I powered off and back on and the second not working icon is gone.  So if anybody else has this same problem, give it a try

  • HT201656 how can i see what is in the "other" category

    Can you see whats in the other category, and delete what you don't want?

    The other catrgory includes system files and saved game data. The only way to see what's in it and to delete it is to jailbreak (which I don't recomend doing right now) but if you would like to do that, you need to root the phone, however I don't want to get into jailbreak stuff on an Apple run forum.

  • Are the emails actually being deleted?

    Heya guys, two very quick questions.
    First of all I view my googlemail through my iPad and when I go into edit the red button says 'archive' instead of delete. This is still red and on my computer this button does actually say delete.
    Is it just using a different word or are my emails being archived somewhere in my account or on my iPad?
    The other thing is regarding the wifi. I use my iPad in coffee shops quite a lot (based in UK) and often I get a msg saying ' cannot connect to wifi', even though the wifi signal in strong. Sometimes after a few minutes it suddenly connects and works fine. Is this their wifi being naff or my iPad being funny?
    Also while I'm seeking advice, I've always wondered if there was an app or some other way to see how fast a connection the wifi I am on is working. Sometimes I find that my Internet runs faster when I turn off the wifi and flick to 3G.
    Thanks,
    Lee

    Google don't want you to actually delete stuff. When you "delete" a Google email on iOS, it simply moves it to the archive folder. You can see this on the iPad by going to the "ALL Mail" folder.
    In the web interface for GMail, there are 2 buttons, the default is for Archive and the other is for Delete. Actually even Delete does NOT seem to do so! It moves it to the Bin folder as far as I can see, from where you can permanently delete it. On the iPad, the Trash folder maps to the Bin folder in GMail.
    WiFi can be tricky at the best of times, but the iPad, especially with iOS 4.2 does seem to be particularly picky about connections.
    Most Cafe WiFi's are open hot-spots where you have to go to a web page after connecting. The iPad does support this but the page does not always appear (it does not use the normal Safari interface). I often have to manually open Safari and force a page refresh (it doesn't matter what page) before the iPad pops up the network's login page.
    Please note that these kind of WiFi networks are HIGHLY insecure, I recommend that you don't visit ANY site where you need to log in, even Facebook.
    Apple do not allow apps that test network speed!
    Your only choice is to connect to one of the web sites that tests end-to-end connection speed.
    In theory, you could write a web page that tested the speed in JavaScript locally though I don't know how accurate it would be.

  • After approver reject RFx response(QUOT), is that possible tho open back?

    Hi Gurus,
    We are now implementing SRM 7 EHp 1 and with workflow in RFx creation and evaluation. During RFx evaluation, once the approval reject the quotation and the status will turn into REJECTED. Is there anyway to open back the quotation in order leave it as rejected.
    There is few scenario we facing at the moment.
    1. 5 lines item. Bidder A been partial award 3 items and Bidder B partial award 2 item. Both quotation route to approval in awaiting approver status. If approval reject bidder A quotation and put a remark to purchaser that bidder B should get the full award (5 items). Is that possible to handle by the system?
    2. 5 lines item. Bidder A been partial award 3 items and Bidder B partial award 2 item. Both quotation route to approval in awaiting approver status. The approval reject bidder A and accept bidder B. Could system handle the 3 items back to the sourcing cockpit?
    Best regards,
    Wind

    Hello Wind,
    Kindly refer to the thread Re: Quotation in Release Rejected Status, how does the purchaser can review it? , to solve your issue here.
    As per the standard functionality delivered with SRM 701, purchaser user should be allowed to view the details for the Rejected RFx response and he also he will be provided with the Undo Reject option to re-submit the response for approval to the purchasing manager.
    Hope this helps you.
    Best Regards,
    Rahul

Maybe you are looking for